PC713VxNSZX Series/PC713VxYSZX Series PC713VxNSZX Series/ PC713VxYSZX Series High Isolation Voltage Type Photocoupler Features Outline Dimensions Applications Internal connection diagram 6 Anode mark Rank mark 1. Home appliances 2. Programmable controllers 3. Peripheral equipment of personal computers 5 4 PC713V 1 2 3 0.60.2 1.20.3 5 4 1 2 3 7.620.3 0.5 0.1 0.5 TYP. 3.250.5 3.50.5 PC713VxNSZX Series PC713VxYSZX Series Safty Standard Approval UL TUV(VDE0884) - 2.90.5 * 6 7.120.3 Model Line-up Model No. (Unit : mm) 6.50.3 1. TTL compatible output 2. Isolation voltage (Viso (rms):5kV) 3. Recognized by UL, file No.E64380 Approved by TUV (VDE0884)(PC713VxYSZX Series) 4. 6-pin DIP package 0.260.1 2.540.25 =0 to 13 * Application Model No. PC713V Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating 50 Forward current IF *1 Peak forward current IFM 1 Input Reverse voltage VR 6 Power dissipation P 70 Collector-emitter voltage VCEO 35 Emitter-collector voltage VECO 6 Collector-base voltage VCBO 35 Output Emitter-base voltage VEBO 6 IC 50 Collector current PC 150 Collector power dissipation 170 Total power dissipation Ptot *2 Isolation voltage Viso (rms) 5 Operating temperature -25 to +100 Topr -40 to +125 Tstg Storage temperature *3 260 Soldering temperature Tsol 1 Anode 4 Emitter 2 Cathode 5 Collector 3 NC 6 Base Unit mA A V mW V V V V mA mW mW kV C C C *1 Pulse width100s, Duty ratio=0.001 *2 40 to 60%RH, AC for 1 min *3 For 10 s Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ PC713VxNSZX Series/PC713VxYSZX Series Electro-optical Characteristics Input Output Symbol VF VFM IR Ct ICEO IC Parameter Forward voltage Peak forward voltage Reverse current Terminal capacitance Collector dark current *4 Collector current Collector-emitter saturation voltage Isolation resistance Floating capacitance Cut-off frequency Rise time Response time Fall time Transfer characteristics MIN. - - - - - 2.5 - Conditions IF=20mA IFM=0.5A VR=4V V=0, f=1kHz VCE=20V, IF=0, RBE= IF=5mA, VCE=5V, RBE= VCE(sat) IF=20mA, IC=1mA, RBE= 5x1010 RISO DC500V, 40 to 60%RH V=0, f=1MHz Cf - - VCE=5V, IC=2mA, RL=100, RBE= fC - tr VCE=2V, IC=2mA RL=100, RBE= - tf TYP. 1.2 - - 30 - - 0.1 1011 0.6 80 4 3 MAX. 1.4 3.0 10 250 10-7 30 0.2 - 1.0 - 18 18 (Ta=25C) Unit V V A pF A mA V pF kHz s s *4 Classification table of collector current is shown below. Model No. *5 Rank mark A PC713V1NSZX B PC713V2NSZX C PC713V3NSZX A or B PC713V5NSZX B or C PC713V6NSZX A, B or C PC713V8NSZX PC713V0NSZX A, B, C or no marking IC (mA) 4.0 to 8.0 6.5 to 13.0 10.0 to 20.0 4.0 to 13.0 6.5 to 20.0 4.0 to 20.0 2.5 to 30.0 Measuring Conditions IF=5mA VCE=5V Ta=25C *5 PC713VxYSZX Series are equivalent. Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature 60 Collector power dissipation PC (mW) 200 Forward current IF (mA) 50 40 30 20 10 0 -25 0 25 50 75 Ambient temperature Ta (C) 100 125 150 100 50 0 -25 0 25 50 75 100 Ambient temperature Ta (C) 125 PC713VxNSZX Series/PC713VxYSZX Series Fig.3 Peak Forward Current vs. Duty Ratio 10 000 500 Pulse width100s Ta=25C 5 000 2 000 1 000 500 200 100 50 25C 0C 50 -25C 20 10 5 2 10 1 5 10-3 2 5 10-2 2 5 10-1 2 5 50C 100 20 5 Ta=75C 200 Forward current IF (mA) Peak forward current IFM (mA) Fig.4 Forward Current vs. Forward Voltage 0 1 0.5 1.0 Duty ratio Fig.5 Current Transfer Ratio vs. Forward Current Collector current IC (mA) Current transfer ratio CTR (%) 3.5 25 140 RBE= 100 500k 100k 60 3.0 RBE= Ta=25C IF=30mA 160 80 2.5 30 VCE=5V Ta=25C 120 2.0 Fig.6 Collector Current vs. Collector-emitter Voltage 200 180 1.5 Forward voltage VF (V) 40 PC (MAX.) 20mA 20 15 10mA 10 5mA 5 20 0 0 1 2 5 10 20 0 50 Forward current IF (mA) IF=5mA VCE=5V RBE= 100 50 25 50 3 4 5 6 7 8 9 75 Ambient temperature Ta (C) Fig.8 Collector - emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage VCE(sat) (V) Relative current transfer ratio (%) 150 0 2 Collector-emitter voltage VCE (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 0 -25 1 100 0.14 IF=20mA 0.12 IC=1mA RBE= 0.10 0.08 0.06 0.04 0.02 -30 0 20 40 60 Ambient temperature Ta(C) 80 100 PC713VxNSZX Series/PC713VxYSZX Series Fig.9 Collector Dark Current vs. Ambient Temperature Fig.10 Collector-base Dark Current vs. Ambient Temperature 10-5 VCB=30V RBE= 5 Collector dark current ICBO (A) Collector dark current ICEO (A) 10-6 10-8 VCE=20V RBE= 10-7 10-8 10-9 10-10 2 10-9 5 2 10-10 5 2 10-11 -25 0 25 50 75 10-11 100 0 25 Ambient temperature Ta (C) Fig.11 Response Time vs. Load Resistance 500 75 100 125 Fig.12 Test Circuit for Response Time VCE=2V IC=2mA RBE= Ta=25C 200 100 50 Response time (s) 50 Ambient temperature Ta (C) tr 20 10 Output Input 5 RD td 2 1 Input VCC tf RL 10% Output 90% td ts ts tr tf 0.5 0.2 0.1 0.1 1 10 Load resistance RL (k) Fig.14 Test Circuit for Frequency Response Fig.13 Frequency Response VCE=5V IC=2mA RBE= Ta=25C Voltage gain Av (dB) 0 RL=10k -10 1k 100 RD RL Output -20 0.5 VCC 1 2 5 10 20 50 100 200 500 Frequency f (kHz) Application Circuits NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115