Polyester enclosures CP series BERNSTEIN polyester enclosures from the CP and CPS series are made of high-quality glass-fibre reinforced polyester. The reduced surface resistance (RO <109 ohms) of the black polyester enclosures (CPS) makes them ideally suited to use in `EX' areas and in generally harsh conditions. They can encapsulate electrical, electronic and control components. All enclosures comply with protection class IP 65 (according to DIN). BERNSTEIN polyester enclosures provide either M4 or M6 internal mounting options, depending on the size of the base. These galvanised brass bushes are embedded in the interior of the base, permitting the assembly of mounting plates, mounting rails, PCBs etc. The captive stainless steel lid screws are held in place by a lock integrated in the lid. The threaded bushes for lid attachment are also made of stainless steel. A gasket is factory-fitted (for standard enclosures), guaranteeing the protection class. The polyester enclosures are available in grey (RAL 7000, light grey) or black material (RAL 9005, jet black), as standard. Technical data Material Glass-fibre reinforced polyester in grey or glass-fibre reinforced polyester in black Gasket Neoprene round seal (siliconised) alternative: Neoprene round seal (silicone-free) Silicone round seal Lid screws Stainless steel, captive, multi-purpose cross-head alternative: Allen screws, stainless steel, captive Colour RAL 7000 (grey) or RAL 9005 (deep black) alternative: other colours on request Temperature -40 C to +80 C (neoprene gasket) alternative: -50 C to +130 C (silicone gasket) or -30 C to +100 C (explosion-hazardous areas) Protection class IP 65 alternative: higher protection classes on request Approval German Lloyd: No. 91 186 - 84HH UL: File E 182264 364 Earthing rails Galvanised steel for connecting and routing of protective earth connections. Mounting plates galvanised sheet steel or laminated paper (thickness: CP-140 to CP-195, laminated paper 1.5 mm; CP-220 to CP-320 and CP-370 to CP-460 sheet steel 1.5 mm; CP-330 sheet steel 2.5 mm), permitting the extended mounting of equipment. Mounting rails Standard rails TS-15, TS-32 or TS-35 (steel), yellow-passivated for holding terminal blocks. External attachment brackets Stainless steel for mounting enclosures without lid opening. The butt-straps always run in parallel to the narrow face of the enclosures. External hinges For hinged attachment of the enclosure lid. Opening angle of lid approx. 155. Aluminium casting, RAL 7001 or RAL 9005. Mechanical machining is required for mounting. Drill template is supplied. Internal hinges For hinged attachment of the enclosure lid. Opening angle of lid approx. 95. Stainless steel. Mechanical machining is required for mounting. Silicone lid gasket with improved temperature range (-50 C to +130 C). Standard type made of silicone foam. Overview - polyester enclosures Dimensions/mm L x Wx H 80 x 75 x 55 80 x 75 x 75 110 x 75 x 55 110 x 75 x 75 160 x 75 x 55 160 x 75 x 75 190 x 75 x 55 190 x 75 x 75 122 x 120 x 90 220 x 120 x 90 160 x 160 x 90 260 x 160 x 90 360 x 160 x 90 560 x 160 x 90 255 x 250 x 120 400 x 250 x 120 400 x 405 x 120 400 x 405 x 165 Polyester enclosures (grey) Polyester enclosures (black) Part number Type Part number Type 414.0.0000.00 414.0.0000.50 415.0.0000.00 415.0.0000.50 417.0.0000.00 417.0.0000.50 419.0.0000.00 419.0.0000.50 422.0.0000.00 424.0.0000.00 428.0.0000.00 430.0.0000.00 432.0.0000.00 433.0.0000.00 437.0.0000.00 440.0.0000.00 445.0.0000.00 446.0.0000.00 CP-140 CP-145 CP-150 CP-155 CP-170 CP-175 CP-190 CP-195 CP-220 CP-240 CP-280 CP-300 CP-320 CP-330 CP-370 CP-400 CP-450 CP-460 514.0.0000.00 514.0.0000.50 515.0.0000.00 515.0.0000.50 517.0.0000.00 517.0.0000.50 519.0.0000.00 519.0.0000.50 522.0.0000.00 524.0.0000.00 528.0.0000.00 530.0.0000.00 532.0.0000.00 533.0.0000.00 537.0.0000.00 540.0.0000.00 545.0.0000.00 546.0.0000.00 CPS-140 CPS-145 CPS-150 CPS-155 CPS-170 CPS-175 CPS-190 CPS-195 CPS-220 CPS-240 CPS-280 CPS-300 CPS-320 CPS-330 CPS-370 CPS-400 CPS-450 CPS-460 365 Enclosures Accessories Polyester enclosures Component overview polyester enclosures **) Assembled on 2 mounting rails **) Assembled on 3 mounting rails The number of terminals is reduced when partitions are used. 366 1 1 - - - - - - - - - - - - - - - - - 5 13 8 16 24 40 16 - 28 - 28 56 84 28 56 84 9.40.2.0110.00 UK 16 - - - - 12 31 19 39 58 96 38 76 66 132 66 132 198 66 132 198 9.40.2.0090.00 5 9 15 19 - - - - - - - - - - - - - - - - UK 10 6 11 19 24 - - - - - - - - - - - - - - - - 9.40.2.0070.00 7 13 22 28 - - - - - - - - - - - - - - - - UK 5 N 9.40.2.0050.00 UK 3 N 1 - - - - - - - - - - - - - - - - - - - - - - - - - - 10 8 6 26 19 16 16 12 10 32 24 20 48 37 29 80 61 48 32 24 19 64 48 38 55 41 33 110 82 106 55 41 33 110 82 66 165 123 99 55 41 33 110 82 66 165 123 99 9.40.2.0030.00 - - - - 10 26 16 32 48 80 32 64 55 110 55 110 165 55 110 165 MBK 10 - - - - 12 31 19 39 58 96 38 76 66 132 66 132 198 66 132 198 MBK 5/E 9.40.2.0020.00 M 4/6 6 11 19 24 - - - - - - - - - - - - - - - - 9.40.2.0010.00 MA 2.5/5 9.40.2.1090.00 7 13 22 28 - - - - - - - - - - - - - - - - 5.2 6.2 2.5 4 1.5 4 - 500 27 36 - m m m - - - - Phoenix Terminal block 7.5 5.2 6.2 8.2 10.2 10 4 4 10 16 6 2.5 4 6 10 500 750 750 750 750 65 36 36 65 87 - m m m m m - - - - - m m m m - m m m m MBK DR 4/6 - - M 16/12 9.40.2.1060.00 DR 1.5/5 9.40.2.1270.00 - 1 - 2 - - - - - - - - - - - - - - - - M 10/10 9.40.2.1050.00 KL-16/20 9.40.1.0080.00 - 1 - - - - - - - - - - - - - - - - - - 9.40.2.1040.00 KL-16/12 9.40.1.0060.00 - - 1 - - - - - - - - - - - - - - - - - M 6/8 9.40.1.0050.00 KL-16/8 1 1 - - - - - - - - - - - - - - - - - - 9.40.2.1280.00 9.40.1.0040.00 G 5/12 1 - - - - - - - - - - - - - - - - - - - MS 4/6 9.40.1.0030.00 G 5/6 1 1 - - - - - - - - - - - - - - - - - - - - 9.40.2.1030.00 9.40.1.0020.00 G 5/4 1 - - - - - - - - - - - - - - - - - - - 9.40.2.0940.00 9.40.1.0130.00 BK 12 5.2 6.2 4 4 4 4 4 4 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 2.5 2.5 2.5 1.5 4 380 380 380 500 500 500 500 500 500 250 380 36 36 36 36 36 36 25 25 25 20 35 - - - - - - - - - - m - - - - - - - - - m m - - - - - - - - - - - - - - - - - - - - - - Entrelec Terminal block 5.2 6.2 6.2 8.2 10.2 12.2 4 6 4 10 16 25 2.5 4 4 6 10 16 750 750 750 750 750 750 26 35 35 46 63 85 m m - m m m - - - - - - m m m m m m m m m m m m 9.40.1.0090.00 Type CP-140/145 CP-150/155 CP-170/175 CP-190/195 CP-220 CP-240 CP-280 CP-300 CP-320 CP-330 CP-370 CP-370*) CP-400 CP-400*) CP-450 CP-450*) CP-450**) CP-460 CP-460*) CP-460**) Wieland Block terminal BK 6 Part number Phoenix Block terminal 9.40.1.0100.00 Terminal width (mm): Single-core mm2 Stranded mm2 Nominal voltage V Loading capacity A Terminal bridging Mounting rail TS 15 TS 32 TS 35 Weidmuller Block terminal BK 4 Model - - - - - - - - 10 8 26 19 16 12 32 24 48 37 80 61 32 24 64 48 55 41 110 82 55 41 110 82 165 123 55 41 110 82 165 123 - - - - 6 16 10 20 29 48 19 38 33 66 33 66 99 33 66 99 - - - - 12 31 19 39 58 96 38 76 66 132 66 132 198 66 132 198 - - - - 10 26 16 32 48 80 32 64 55 110 55 110 165 55 110 165 367 Enclosures - - - - 5 13 8 16 24 40 16 - 28 - 28 56 84 28 56 84 9.40.2.1470.00 WDU 4 6 14 8 16 25 41 17 37 29 58 29 58 87 - - - - - - - - - - - - - - - 10 8 6 25 19 16 15 12 10 31 24 20 46 37 29 74 61 48 30 24 19 60 48 38 52 41 33 104 82 106 52 41 33 104 82 66 156 123 99 52 41 33 104 82 66 156 123 99 WDU 2.5 9.40.2.1460.00 - - - - 10 26 16 32 48 86 32 64 55 110 55 110 165 55 110 165 SAK 16 PA 9.40.2.0170.00 6 11 19 24 - - - - - - - - - - - - - - - - SAK 10 PA 9.40.2.0470.00 7 13 22 28 - - - - - - - - - - - - - - - - SAK 6 NPA 9.40.2.0160.00 - - - - 9.40.2.0150.00 4 - - - - - - - - - 7 - - - - - - - - - 12 - - - - - - - - - 15 - - - - - - - - - - 13 7 20 16 16 13 13 9 8 - 29 17 44 35 35 29 29 22 17 - 17 10 26 20 20 17 17 12 10 - 33 20 51 40 40 33 13 25 20 - 50 30 76 60 60 50 50 37 30 - 83 50 125 100 100 83 83 62 50 - 33 21 53 42 42 35 35 26 21 - 66 42 106 84 84 70 70 52 42 - 59 35 89 71 71 59 59 44 35 - 118 70 178 142 142 118 118 88 70 - 59 35 90 71 71 59 59 44 35 - 118 70 180 142 142 118 118 88 70 - 117 105 270 213 213 177 177 132 105 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SAK 4 PA 7 12 20 25 - - - - - - - - - - - - - - - - SAK 2.5 PA 9.40.2.0140.00 - - - - - - - - 12 9 28 21 16 12 34 26 50 38 82 62 33 25 66 50 57 43 114 86 57 43 114 86 171 129 57 43 114 86 171 129 9.40.2.0130.00 - - - - 14 33 19 41 60 98 40 80 68 136 68 136 204 68 136 204 AKZ 4 PA - - - - - - - - - - - - 11 9 17 26 21 17 15 12 9 32 26 21 48 39 31 78 64 51 32 26 20 64 52 40 54 44 35 108 88 70 54 44 35 108 88 70 162 132 205 54 44 35 108 88 70 162 132 205 AKZ 2.5 PA 9.40.2.0500.00 - - - - 12 28 16 35 52 85 34 68 58 116 59 118 177 59 118 177 283-601 9.40.2.3290.00 284-601 9.40.2.3280.00 282-601 9.40.2.3270.00 281-901 9.40.2.3260.00 264-721 9.40.2.3030.00 281-601 9.40.2.3250.00 264-701 9.40.2.3020.00 280-901 9.40.2.3240.00 8WA20119.40.2.4060.00 1DH20 280-601 9.40.2.0930.00 8WA20119.40.2.4050.00 1DG20 279-621 9.40.2.3230.00 8WA20119.40.2.4040.00 1DF20 264-731 9.40.2.3220.00 8WA1204 9.40.2.4030.00 264-711 9.40.2.3210.00 8WA10119.40.2.4010.00 1DG11 8WA10119.40.2.4020.00 1DH11 8WA10119.40.2.4000.00 1DF11 Siemens WAGO Weidmuller Terminal block Terminal block Terminal block Terminal block Screw terminals 6.2 10.2 6.2 10.2 4.2 5.2 5.2 6.2 6.2 8.2 10.2 12.2 5.2 6.2 6.2 6.5 8.2 10.2 12.2 5.2 6.2 Caged tension spring 4 4 6 10 16 2.5 4 4 6 10 16 25 4 6 4 6 10 25 4 4 10 2.5 2.5 2.5 2.5 1.5 2.5 2.5 4 4 6 10 16 1.5 4 2.5 4 6 10 15 2.5 4 2.5 4 6 16 2.5 4 6 2.5 2.5 2.5 2.5 1.5 2.5 2.5 750 750 750 750 750 750 750 800 800 800 800 800 800 800 800 800 800 800 800 250 380 750 750 750 750 750 750 750 26 26 26 26 18 26 26 34 34 44 61 82 27 36 27 36 47 65 87 26 34 26 35 46 85 36 36 65 m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m - - - - - - - - - - m m - - - - - - - - m - - - - - - - - - - - - - - - - - - - m m m m m - - - - - - - - - - - m m m m m m m m m m - - - - - - - m m m m m m m m m 80 x 75 x 55 mm 80 x 75 x 75 mm CP-140 Polyester enclosure, grey CPS-140 Polyester enclosure, black CP-145 Polyester enclosure, grey CPS-145 Polyester enclosure, black LID LID BASE Type Weight (g) External dimensions (mm) Complete enclosures Grey (CP), with gasket and lid screws Grey (CP), with gasket, hex. socket head screws Grey (CP), with silicone gasket and lid screws Black (CPS), with gasket and lid screws Black (CPS), with gasket, hex. socket head screws Black (CPS), with silicone gasket and lid screws Accessories (separate or as a mounting set) Mounting plate TS 15 mounting rail TS 32 mounting rail TS 35 mounting rail Grounding rail External attachment brackets External hinges for CP enclosure (grey)** External hinges for CPS enclosure (black)** Internal hinges with lid guiding** Silicone gasket for wider temperature range (piece goods) BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-140 230 80 x 75 x 55 Part number 414.0.0000.00 l 414.0.0010.00 414.0.0140.00 CP-145 300 80 x 75 x 75 Part number 414.0.0000.50 l 414.0.0010.50 414.0.0100.50 CPS-140 230 514.0.0000.00 l 514.0.0010.00 514.0.0170.00 982.3.0000.00 982.0.0030.00 - - - 982.4.0000.00 - - - 923.1.0060.00 CPS-145 300 514.0.0000.50 l 514.0.0010.50 514.0.0100.50 l l 982.3.0000.00 982.0.0030.00 - - - 982.4.0000.00 - - - 923.1.0060.00 l l l l l l Max. Pg threads ISO M 12 16 20 25 32 40 50 Side A/B 5 2 2 1 0 0 0 Side C/D 2 1 1 0 0 0 0 ** mechanical enclosure machining required l = kept in stock 368 63 0 0 ISO M 12 16 20 25 32 40 50 Side A/B 8 4 2 1 1 0 0 Side C/D 4 1 1 1 1 0 0 ** mechanical enclosure machining required l = kept in stock 63 0 0 110 x 75 x 55 mm 110 x 75 x 75 mm 160 x 75 x 55 mm CP-150 Polyester enclosure, grey CPS-150 Polyester enclosure, grey CP-155 Polyester enclosure, grey CPS-155 Polyester enclosure, grey CP-170 Polyester enclosure, grey CPS-170 Polyester enclosure, grey LID LID LID BASE BASE BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-150 295 110 x 75 x 55 Part number 415.0.0000.00 l 415.0.0010.00 415.0.0250.00 CP-155 360 110 x 75 x 75 Part number 415.0.0000.50 l 415.0.0010.50 415.0.0100.50 CP-170 405 160 x 75 x 55 Part number 417.0.0000.00 l 417.0.0010.00 417.0.0160.00 CPS-150 295 515.0.0000.00 l 515.0.0010.00 515.0.0310.00 982.3.0010.00 982.0.0060.00 - - - 982.4.0000.00 - - - 923.1.0060.00 515.0.0000.50 l 515.0.0010.50 515.0.0100.50 l l 982.3.0010.00 982.0.0060.00 - - - 982.4.0000.00 - - - 923.1.0060.00 l l ISO M 12 16 20 25 32 40 50 Side A/B 8 3 2 2 0 0 0 Side C/D 2 1 1 0 0 0 0 ** mechanical enclosure machining required l = kept in stock CPS-155 360 63 0 0 CPS-170 405 517.0.0000.00 l 517.0.0010.00 517.0.0100.00 l l 982.3.0020.00 982.0.0120.00 - - - 982.4.0000.00 - - - 923.1.0060.00 l l ISO M 12 16 20 25 32 40 50 Side A/B 12 6 3 2 2 0 0 Side C/D 4 1 1 1 1 0 0 ** mechanical enclosure machining required l = kept in stock Enclosures * minimum dimensions at level of mounting plate support 63 0 0 l l l l ISO M 12 16 20 25 32 40 50 Side A/B 12 5 4 3 0 0 0 Side C/D 2 1 1 0 0 0 0 ** mechanical enclosure machining required l = kept in stock 63 0 0 369 160 x 75 x 75 mm 190 x 75 x 55 mm CP-175 Polyester enclosure, grey CPS-175 Polyester enclosure, black CP-190 Polyester enclosure, grey CPS-190 Polyester enclosure, black LID LID BASE BASE Type Weight (g) External dimensions (mm) Complete enclosures Grey (CP), with gasket and lid screws Grey (CP), with gasket, hex. socket head screws Grey (CP), with silicone gasket and lid screws Black (CPS), with gasket and lid screws Black (CPS), with gasket, hex. socket head screws Black (CPS), with silicone gasket and lid screws Accessories (separate or as a mounting set) Mounting plate TS 15 mounting rail TS 32 mounting rail TS 35 mounting rail Grounding rail External attachment brackets External hinges for CP enclosure (grey)** External hinges for CPS enclosure (black)** Internal hinges with lid guiding** Silicone gasket for wider temperature range (piece goods) * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-175 460 160 x 75 x 75 Part number 417.0.0000.50 l 417.0.0010.50 417.0.0100.50 CP-190 450 190 x 75 x 55 Part number 419.0.0000.00 l 419.0.0010.00 419.0.0150.00 CPS-175 460 517.0.0000.50 l 517.0.0010.50 517.0.0100.50 982.3.0020.00 982.0.0120.00 - - - 982.4.0000.00 - - - 923.1.0060.00 CPS-190 450 519.0.0000.00 l 519.0.0010.00 519.0.0100.00 l l 982.3.0030.00 982.0.0150.00 - - - 982.4.0000.00 - - - 923.1.0060.00 l l l l l l Max. Pg threads ISO M 12 16 20 25 32 40 50 Side A/B 18 10 6 4 3 0 0 Side C/D 4 1 1 1 1 0 0 ** mechanical enclosure machining required l = kept in stock 370 63 0 0 ISO M 12 16 20 25 32 40 50 Side A/B 16 7 5 4 0 0 0 Side C/D 2 1 1 0 0 0 0 ** mechanical enclosure machining required l = kept in stock 63 0 0 190 x 75 x 75 mm 122 x 120 x 90 mm 220 x 120 x 90 mm CP-195 Polyester enclosure, grey CPS-195 Polyester enclosure, black CP-220 Polyester enclosure, grey CPS-220 Polyester enclosure, black CP-240 Polyester enclosure, grey CPS-240 Polyester enclosure, black LID LID LID BASE BASE BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-195 530 190 x 75 x 75 Part number 419.0.0000.50 l 419.0.0010.50 419.0.0100.50 CP-220 750 122 x 120 x 90 Part number 422.0.0000.00 l 422.0.0010.00 422.0.0180.00 CP-240 1060 220 x 120 x 90 Part number 424.0.0000.00 l 424.0.0010.00 424.0.0470.00 CPS-195 530 519.0.0000.50 l 519.0.0010.50 519.0.0100.50 982.3.0030.00 982.0.0150.00 - - - 982.4.0000.00 - - - 923.1.0060.00 522.0.0000.00 l 522.0.0010.00 522.0.0400.00 l l 982.3.0040.00 - 982.1.0000.00 982.2.0010.00 981.0.0020.00 982.4.0010.00 980.1.0450.00 980.1.0460.00 - 923.1.0060.00 l l ISO M 12 16 20 25 32 40 50 Side A/B 24 12 8 4 3 0 0 Side C/D 14 1 1 1 1 0 0 ** mechanical enclosure machining required l = kept in stock CPS-220 750 63 0 0 CPS-240 1060 524.0.0000.00 l 524.0.0010.00 524.0.0400.00 l 982.3.0050.00 - 982.1.0050.00 982.2.0070.00 981.0.0080.00 982.4.0010.00 980.1.0450.00 980.1.0460.00 - 923.1.0060.00 l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 13 6 4 3 2 1 0 Side C/D 6 3 2 2 1 0 0 ** mechanical enclosure machining required l = kept in stock Enclosures * minimum dimensions at level of mounting plate support 63 0 0 l l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 27 12 9 6 4 3 0 Side C/D 6 3 2 2 1 0 0 ** mechanical enclosure machining required l = kept in stock 63 0 0 371 Type Weight (g) External dimensions (mm) Complete enclosures Grey (CP), with gasket and lid screws Grey (CP), with gasket, hex. socket head screws Grey (CP), with silicone gasket and lid screws Black (CPS), with gasket and lid screws Black (CPS), with gasket, hex. socket head screws Black (CPS), with silicone gasket and lid screws Accessories (separate or as a mounting set) Mounting plate TS 15 mounting rail TS 32 mounting rail TS 35 mounting rail Grounding rail External attachment brackets External hinges for CP enclosure (grey)** External hinges for CPS enclosure (black)** Internal hinges with lid guiding** Silicone gasket for wider temperature range (piece goods) 160 x 160 x 91 mm 260 x 160 x 91 mm CP-280 Polyester enclosure, grey CPS-280 Polyester enclosure, black CP-300 Polyester enclosure, grey CPS-300 Polyester enclosure, black LID LID BASE BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-280 1130 160 x 160 x 91 Part number 428.0.0000.00 l 428.0.0010.00 428.0.0200.00 CP-300 1710 260 x 160 x 91 Part number 430.0.0000.00 l 430.0.0010.00 430.0.0140.00 CPS-280 1130 528.0.0000.00 l 528.0.0010.00 528.0.0100.00 982.3.0060.00 - 982.1.0020.00 982.2.0030.00 981.0.0040.00 982.4.0040.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 CPS-300 1710 530.0.0000.00 l 530.0.0010.00 530.0.0340.00 l 982.3.0070.00 - 982.1.0080.00 982.2.0110.00 981.0.0100.00 982.4.0040.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 l l l l l l l l l l l l l l l l l Max. Pg threads ISO M 12 16 20 25 32 40 50 Side A/B 18 8 6 4 2 2 1 Side C/D 9 4 3 2 2 1 0 ** mechanical enclosure machining required l = kept in stock 372 63 0 0 ISO M 12 16 20 25 32 40 50 Side A/B 33 15 12 8 4 3 3 Side C/D 9 4 3 2 2 1 0 ** mechanical enclosure machining required l = kept in stock 63 0 0 360 x 160 x 91 mm 560 x 160 x 91 mm 255 x 250 x 120 mm CP-320 Polyester enclosure, grey CPS-320 Polyester enclosure, black CP-330 Polyester enclosure, grey CPS-330 Polyester enclosure, black CP-370 Polyester enclosure, grey CPS-370 Polyester enclosure, black LID LID LID BASE BASE BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-320 2150 360 x 160 x 91 Part number 432.0.0000.00 l 432.0.0010.00 432.0.0310.00 CP-330 3185 560 x 160 x 91 Part number 433.0.0000.00 l 433.0.0010.00 433.0.0100.00 CP-370 2650 255 x 250 x 120 Part number 437.0.0000.00 l 437.0.0010.00 437.0.0100.00 CPS-320 2150 532.0.0000.00 l 532.0.0010.00 532.0.0210.00 982.3.0080.00 - 982.1.0120.00 982.2.0150.00 981.0.0140.00 982.4.0040.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 533.0.0000.00 l 533.0.0010.00 533.0.0100.00 l 982.3.0850.00 - 982.1.0150.00 982.2.0180.00 981.0.0160.00 982.4.0040.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 l l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 48 23 18 11 7 5 4 Side C/D 9 4 3 2 2 1 0 ** mechanical enclosure machining required l = kept in stock CPS-330 3185 63 0 0 CPS-370 2650 537.0.0000.00 l 537.0.0010.00 537.0.0230.00 l 982.3.0090.00 - 982.1.0070.00 982.2.0100.00 981.0.0350.00 982.4.0110.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 l l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 76 40 28 18 10 8 6 Side C/D 9 4 3 2 2 1 0 ** mechanical enclosure machining required l = kept in stock Enclosures * minimum dimensions at level of mounting plate support 63 0 0 l l l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 42 23 17 11 7 4 3 Side C/D 32 14 10 16 4 3 2 ** mechanical enclosure machining required l = kept in stock 63 3 2 373 400 x 250 x 120 mm 400 x 405 x 120 mm CP-400 Polyester enclosure, grey CPS-400 Polyester enclosure, black CP-450 Polyester enclosure, grey CPS-450 Polyester enclosure, black LID LID BASE BASE Type Weight (g) External dimensions (mm) Complete enclosures Grey (CP), with gasket and lid screws Grey (CP), with gasket, hex. socket head screws Grey (CP), with silicone gasket and lid screws Black (CPS), with gasket and lid screws Black (CPS), with gasket, hex. socket head screws Black (CPS), with silicone gasket and lid screws Accessories (separate or as a mounting set) Mounting plate TS 15 mounting rail TS 32 mounting rail TS 35 mounting rail Grounding rail External attachment brackets External hinges for CP enclosure (grey)** External hinges for CPS enclosure (black)** Internal hinges with lid guiding** Silicone gasket for wider temperature range (piece goods) * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-400 3650 400 x 250 x 120 Part number 440.0.0000.00 l 440.0.0010.00 440.0.0770.00 CP-450 5580 400 x 405 x 120 Part number 445.0.0000.00 l 445.0.0010.00 445.0.0130.00 CPS-400 3650 540.0.0000.00 l 540.0.0010.00 540.0.0100.00 982.3.0100.00 - 982.1.0140.00 982.2.0170.00 981.0.0150.00 982.4.0110.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 CPS-450 5580 545.0.0000.00 l 545.0.0010.00 545.0.0100.00 l 982.3.0110.00 - 982.1.0140.00 982.2.0170.00 981.0.0150.00 982.4.0120.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 l l l l l l l l l l l l l l l l l Max. Pg threads ISO M 12 16 20 25 32 40 50 Side A/B 74 38 27 17 13 6 5 Side C/D 32 14 10 8 4 3 2 ** mechanical enclosure machining required l = kept in stock 374 63 4 2 ISO M 12 16 20 25 32 40 50 Side A/B 74 38 27 17 13 6 5 Side C/D 57 29 20 15 7 5 4 ** mechanical enclosure machining required l = kept in stock 63 4 4 400 x 405 x 165 mm 170 x 170 x 92 mm 340 x 170 x 92 mm CP-460 Polyester enclosure, grey CPS-460 Polyester enclosure, black CPS-530 Polyester enclosure, black CPS-550 Polyester enclosure, black LID LID LID BASE BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CP-460 7740 400 x 405 x 165 Part number 446.0.0000.00 l 446.0.0010.00 446.0.0100.00 CPS-530 850 170 x 170 x 92 Part number - - - 553.0.0000.00 l - - CPS-550 1800 340 x 170 x 92 Part number - - - 555.0.0000.00 l - - - - 982.1.0440.00 - 981.0.0440.00 - - - - 923.1.0060.00 l - - 982.1.0450.00 - 981.0.0450.00 - - - - 923.1.0060.00 l CPS-460 7740 546.0.0000.00 l 546.0.0010.00 546.0.0100.00 982.3.0110.00 - 982.1.0140.00 982.2.0170.00 981.0.0150.00 982.4.0120.00 980.1.0450.00 980.1.0460.00 980.1.0320.00 923.1.0090.00 l l l l l l l l l ISO M 12 16 20 25 32 40 50 Side A/B 105 56 40 27 20 10 9 Side C/D 92 45 30 23 12 9 6 ** mechanical enclosure machining required l = kept in stock 63 8 5 ISO M 12 16 20 25 32 40 50 Side A/B 22 11 8 4 3 2 2 Side C/D 10 4 3 2 2 2 1 ** mechanical enclosure machining required l = kept in stock 63 0 0 ISO M 12 16 20 25 32 40 50 Side A/B 48 22 15 9 6 5 3 Side C/D 10 4 3 2 2 1 0 ** mechanical enclosure machining required l = kept in stock Enclosures BASE 63 0 0 375 340 x 340 x 92 mm 340 x 340 x 192 mm CPS-570 Polyester enclosure, black CPS-590 Polyester enclosure, black LID LID BASE Type Weight (g) External dimensions (mm) Complete enclosures Grey (CP), with gasket and lid screws Grey (CP), with gasket, hex. socket head screws Grey (CP), with silicone gasket and lid screws Black (CPS), with gasket and lid screws Black (CPS), with gasket, hex. socket head screws Black (CPS), with silicone gasket and lid screws Accessories (separate or as a mounting set) Mounting plate TS 15 mounting rail TS 32 mounting rail TS 35 mounting rail Grounding rail External attachment brackets External hinges for CP enclosure (grey)** External hinges for CPS enclosure (black)** Internal hinges with lid guiding** Silicone gasket for wider temperature range (piece goods) BASE * minimum dimensions at level of mounting plate support * minimum dimensions at level of mounting plate support CPS-570 2000 340 x 340 x 92 Part number - - - 557.0.0000.00 l - - CPS-590 2600 340 x 340 x 192 Part number - - - 559.0.0000.00 l - - - - 982.1.0450.00 - 981.0.0450.00 - - - - 923.1.0060.00 l - - 982.1.0450.00 - 981.0.0450.00 - - - - 923.1.0060.00 l Max. Pg threads ISO M 12 16 20 25 32 40 50 Side A/B 48 22 15 9 6 5 3 Side C/D 31 16 8 6 5 4 1 ** mechanical enclosure machining required l = kept in stock 376 63 0 0 ISO M 12 16 20 25 32 40 50 Side A/B 48 22 15 9 6 5 3 Side C/D 31 16 8 6 5 4 1 ** mechanical enclosure machining required l = kept in stock 63 0 0