1/20/06
A
B
C
D
7
8
A
B
C
D
1
2
3
4
5
6
7
8
9-1542001-7
4. RoHS COMPLIANT AND CERTIFIED.
(HTS353NF-U)
C-9-1542001-7
DWG. NO.
ASSEMBLY
40mm HEATSINK
IN WRITING BY AN AUTHORIZED OFFICIAL
SPECIFIED
TOLERANCES ARE:
UNLESS OTHERWISE
..XX
..XXXX
.
DATE
DRAWN BY:
ENGINEER:
E.TAO 1/17/06
TITLE:
SIZE:
1.25:1
REV:
A
SCALE: PART NO:
A
SHEET:
1 OF 1
PROJECTION
DIMENSONS ARE IN:
INCHES
FILENAME PROJECT SYSTEM TNIRD ANGLE
.XXX
ANGLES
ANY PURPOSES EXCEPT AS AUTHORIZED
TO OTHERS. REPRODUCED OR USED FOR
ELECTRONICS. NOT TO BE DISCLOSED
CONFIDENTIAL PROPERTY OF TYCO
OR OTHER PURPOSES FOR WHICH LENT.
DO NOT SCALE
DATE MATERIAL:
FINISH:
SEE NOTE
SEE NOTE
ON DEMAND, ON COMPLETION OF ORDERS
OF TYCO. MUST BE RETURNED TO TYCO
NOTE:
1. MATERIAL:
HEAT SINK: ALUM. (BLACK ANODIZE)
CLIP: BLACK PEI (UL94-VO)
2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD
IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON
THE BGA PACKAGE.
HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE.
BARE DIE PACKAGE:
2.5 INCH - LB TORQUE = 7.8 LBS FORCE
3.0 INCH - LB TORQUE = 9.4 LBS FORCE
FULL SIZE LID PACKAGE:
2.5 INCH - LB TORQUE = 6.3 LBS FORCE
3.0 INCH - LB TORQUE = 7.6 LBS FORCE
3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1.
CS. WANG
2.000 DIA.
4-LEGS CLIP SIZE: 40mm
PIN FIN HEATSINK: 0.500 HT.
A±.005.261
1.707
.095
±.005.131
±.0202.000
1.579 LIP LEG
.370 MAX
B
B
DETAIL A
SCALE 6 : 1
.012±.001
2
1
3
SECTION B-B
1 3/8" - 27 UNF -2A
THREAD 1.581
.500
ITEM DESCRIPTION QTY
1MOUNTING CLIP 1
2HEAT SINK 1
3INTERFACE 1
CUSTOMER DRAWING
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Power
° C/W @
Ambient
° C/W @
200 LFM
° C/W @
400 LFM
° C/W @
600 LFM
5 Watts 8.64 4.45 2.80 2.00
10 Watts 7.86 4.49 2.89 2.38
15 Watts 7.38 4.57 2.95 2.42
REVISION(S)
LTR DESCRIPTION INIT APP'D
AECR-06-001164 E.T 1/17/06 C.W 1/20/06
