Description
Features
Mechanical Dimensions
Maximum Ratings
Peak Repetitive Reverse Voltage...VRRM
RMS Reverse Voltage...VR(rms)
DC Blocking Voltage...VDC
FRS10 . . . 110 Series
Average Forward Rectified Current...IF(av)
TA = 55°C (Note 3)
Non-Repetitive Peak Forward Surge Current...IFSM
@ Rated Current & Temp
Operating & Storage Temperature Range...TJ, TSTRG
Maximum Forward Voltage @ 1.0A...VF
Maximum DC Reverse Current...IRTA =25°C
@ Rated DC Blocking Voltage TA =100°C
Typical Junction Capacitance...CJ (Note 1)
Maximum Reverse Recovery Time...tRR
Page 10-2
FRS10 . . . 110 Series
FRS10 FRS11 FRS13 FRS14 FRS16 FRS18 FRS110
50 100 200 400 600 800 1000
35 70 140 280 420 560 700
50 100 200 400 600 800 1000
Data Sheet
1.0 Amp FAST RECOVERY
RECTIFIERS
Units
............................................. 1.0 ...............................................
............................................. 50 ...............................................
........................................ -65 to 150 .........................................
............................................. 1.3 ...............................................
............................................. 5.0 ...............................................
............................................. 100 ...............................................
............................................. 15 ...............................................
Volts
Volts
Volts
Amps
Amps
°C
Volts
µAmps
µAmps
pF
ns
nFAST SWITCHING FOR
HIGH EFFICIENCY
nHIGH SURGE CAPABILITY
n1.0 AMP OPERATION @ TA = 55°C, WITH
NO THERMAL RUNAWAY
nMEETS UL SPECIFICATION 94V-0
150 150 150 150 250 500 500
DO-214AC
(SMA)
Electrical Characteristics
Data Sheet
1.0 Amp FAST RECOVERY
RECTIFIERS
FRS10 . . . 110 Series
Page 10-3
NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V.
2. Thermal Resistance Junction to Ambient, Jedec Method.
3. PCB mounted on 5.0mm2 (.013mm thick) copper pads.
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
Single Phase Half
Wave, 60 Hz
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.
Forward Current Derating Curve
Ambient Temperature (°°
°°
°C)
Average Forward Current ( A)
Peak Forward Surge Current (A)
Non-Repetitive
Peak Forward Surge Current
Number of Cycles @ 60 Hz
Reverse Recovery Characteristics
Typical Junction Capacitance
Junction Capacitance (pF)
Reverse Voltage (V)
Non-
Inductive
1
Non-
Inductive
D.U.T 10
Oscilliscope
Note 1
Pulse
Generator
Note 2
(-)
(+)
50
(-)
(+)
25 VDC
Notes: 1. Rise Time = 7 ns Max.
Impedance = 1 megohm, 22 pF
2. Rise Time = 10 ns Max.
Source Impedance = 50 Ohms Time Base Set @ 50/100ns/cm
+.5A
0A
-.25A
-1.0A 1 cm
tRR
Typical Instantaneous Forward Characteristics
Forward Current (A)
Forward Voltage (V)
TJ = 25°°
°°
°C