1SP0335x2xx-5SNA0500J650300 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Compact, high-performance, plug-and-play single-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter topologies Abstract The SCALE-2 plug-and-play driver 1SP0335x2xx-5SNA0500J650300 is a compact single-channel intelligent gate driver designed for ABB's IGBTs 5SNA0500J650300. The master driver 1SP0335x2Mx-5SNA0500J650300 features a fiber-optic interface. It can be used as stand-alone driver or in conjunction with up to three 1SP0335D2Sx-5SNA0500J650300 slaves to drive up to four parallel-connected IGBT modules of type 5SNA0500J650300. The DC/DC power supply must be purchased as a separate unit (one per master driver). For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to: www.IGBT-Driver.com/go/plug-and-play Features Applications [ Plug-and-play solution [ Allows parallel connection of IGBT modules [ For 2-level, 3-level and multilevel topologies [ Fiber-optic links (master) [ Built-in interface to 1SP0335D2Sx (slave) [ Duty cycle 0...100% [ Dynamic Advanced Active Clamping DA C [ Dynamic IGBT short-circuit protection [ Monitoring of supply voltage [ Monitoring of gate voltage [ Extremely reliable; long service life [ Shortens application development time [ Suitable for 5SNA0500J650300 2 IGBT-Driver.com [ Traction [ Railroad power supplies [ Light rail vehicles [ HVDC [ Flexible AC transmission systems (FACTS) [ Medium-voltage converters [ Industrial drives [ Wind-power converters [ Medical applications [ Research [ And many others Page 1 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Safety Notice! The data contained in this data sheet is intended exclusively for technically trained staff. Handling all highvoltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory! Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to the "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers" on www.IGBT-Driver.com/go/1SP0335. When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other than those specified. Incorrect use may result in failure. Mechanical Dimensions Dimensions: See the relevant "Description and Application Manual" Mounting principle: Connected to IGBT module with screws Fiber-Optic Interfaces (1SP0335x2Mx) Interface Remarks Part type # Drive signal input Drive signal input Status output Status output 1SP0335V, fiber-optic receiver (Notes 1, 2) 1SP0335S, fiber-optic receiver (Notes 1, 2) 1SP0335V, fiber-optic transmitter (Notes 1, 3) 1SP0335S, fiber-optic transmitter (Notes 1, 3) HFBR-2522Z HFBR-2412Z HFBR-1522Z HFBR-1412Z Interface Remarks Part type # Power supply connector X1 Bus connectors X2 and X3 On-board connector (Note 4) On-board connectors (Note 5) Electrical Connectors Page 2 214012 214013 INTELLIGENT POWER ELECTRONICS 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Absolute Maximum Ratings Parameter Remarks Supply voltage VDC Average supply current IDC Average supply current IDC Gate output power VDC to COM 1SP0335x2Mx only (Note 6) 1SP0335x2Mx with three 1SP0335D2Sx (Note 6) 1SP0335x2Mx, Ta < 70C (Note 7) 1SP0335x2Mx, Ta = 85C (Note 7) 1SP0335D2Sx, Ta < 70C (Note 8) 1SP0335D2Sx, Ta = 85C (Note 8) 1SP0335x2Mx, Ta < 70C 1SP0335x2Mx, Ta = 85C 1SP0335D2Sx, Ta < 70C 1SP0335D2Sx, Ta = 85C Note 9 Switching operation (Note 10) Off state (Note 11) Collector-emitter voltage Between parallel connected drivers (Note 12) Between parallel connected drivers (Note 13) X2 and X3, total RMS value (Note 14) X2 and X3, total peak value (Note 14) Gate output power Switching frequency F Switching frequency F Gate peak current Iout DC-link voltage Operating voltage Max. emitter-emitter voltage |dV/dt| Max. interface current Min Operating temperature Storage temperature 0 Max Unit -40 -40 30 V 215 mA 740 mA 3.5 W 2.5 W 3.3 W 2.3 W 17 kHz 12 kHz 16 kHz 11 kHz +35 A 4400 V 5200 V 6500 Vpeak 200 Vpeak 50 kV/s 4 Arms 20 Apeak +85 C +90 C -35 Recommended Operating Conditions Power Supply Remarks Min Typ Max Unit Supply voltage VDC To COM 23.5 25 26.5 V IGBT-Driver.com Page 3 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Electrical Characteristics All data refer to +25C and VDC = 25V unless otherwise specified Power Supply Remarks Supply current IDC Without load, only 1SP0335x2Mx Without load, per additional 1SP0335D2Sx Power Supply Monitoring Remarks Min Typ Max Unit Supply threshold Viso-Vee 12.1 11.5 0.35 5 4.7 0.15 12.6 12.0 13.1 12.5 5.15 4.85 5.3 5 Monitoring hysteresis Clear fault Set fault (Note 15) Set/clear fault Clear fault Set fault (Note 15) Set/clear fault V V V V V V Bus to 1SP0335D2Sx Remarks Min Typ Max Monitoring hysteresis Supply threshold Vee-VCOM Supply voltage Turn-off command Turn-on command To COM To COM Gate Monitoring Remarks Turn-on threshold VGE,on,min Turn-off threshold VGE,off,max Filter delay Gmean to E, set fault (Note 16) Gmean to E, set fault (Note 16) Turn-on (Note 16) Turn-off (Note 16) Short-circuit Protection Remarks Static Vce-monitoring threshold Response time Delay to IGBT turn-off Between auxiliary terminals (Note 17) DC-link voltage = 4400V (Note 18) DC-link voltage = 3000V (Note 18) DC-link voltage = 2200V (Note 18) DC-link voltage = 1500V (Note 18) After the response time (Note 19) Timing Characteristics Remarks Turn-on delay td(on) Turn-off delay td(off) Note 20 Note 20 Timing Characteristics Remarks Output rise time tr(out) Output fall time tf(out) G to E (Note 21) G to E (Note 21) Page 4 Min Typ Max 45 20 mA mA VDC 0 15 Min Typ Typ Max Typ Max Typ 9 30 Unit V s s s s s Max 190 185 Min Unit V V s s 247 5.9 6 6.4 10.2 0.3 Min Unit V V V 12.9 -7.6 28 42 Min Unit Unit ns ns Max Unit ns ns INTELLIGENT POWER ELECTRONICS 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Timing Characteristics Remarks Transmission delay of fault state Delay to clear fault state Note 22 After IGBT short circuit (Note 23) After gate-monitoring fault (Notes 23, 27) Acknowledge delay time Acknowledge pulse width Note 24 On host side 400 250 700 1050 ns ns Gate Output Remarks Min Typ Max Unit Turn-on gate resistor Rg(on) Turn-off gate resistor Rg(off) Auxiliary gate capacitor Cge Gate voltage at turn-on Gate-voltage at turn-off Note 25 Note 25 Note 26 Note 26 Min Typ Max 90 9 1 4.1 23 150 15 -10 Unit ns s s nF V V Footnotes to the Key Data 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) The transceivers required on the host controller side are not supplied with the gate driver. It is recommended to use the same types as used in the gate driver. For product information refer to www.IGBT-Driver.com/go/fiberoptics The recommended transmitter current at the host controller is 20mA. A higher current may increase jitter or delay at turn-off. The typical transmitter current at the gate driver is 18mA. In case of supply undervoltage, the minimum transmitter current at the gate driver is 12mA: this is suitable for adequate plastic optical fibers with a length of more than 10 meters. This refers to the manufacturer ordering number, see www.igbt-driver.com/go/ext_erni. The customer-side connector as well as cables with different lengths can be supplied by CONCEPT. Refer to the "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers" for more information. This refers to the manufacturer ordering number, see www.igbt-driver.com/go/ext_erni. These connectors are to be used to connect 1SP0335x2Mx (master) or 1SP0335D2Sx (slave) to 1SP0335D2Sx (slave) if parallel connection of IGBT modules is required. Cables with different lengths can be supplied by CONCEPT. Refer to the "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers" for more information. If the specified value is exceeded, this indicates a driver overload. It should be noted that the driver is not protected against overload. The given power can only be fully exploited without slaves 1SP0335D2Sx (no parallel connection of IGBT modules). If the specified value is exceeded, this indicates a driver overload. It should be noted that the driver is not protected against overload. From 70C to 85C, the maximum permissible output power can be linearly interpolated from the given data. The given power can be fully exploited with slaves 1SP0335D2Sx (parallel connection of IGBT modules). If the specified value is exceeded, this indicates a driver overload. It should be noted that the driver is not protected against overload. From 70C to 85C, the maximum permissible output power can be linearly interpolated from the given data. The gate current is limited by the gate resistors located on the driver. This limit is due to active clamping under switching conditions. Refer to the "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers". Due to the Dynamic Active Advanced Clamping Function (DA2C) implemented on the driver, the DClink voltage can be increased in the off-state condition (e.g. after emergency shut-down). This value is only valid when the IGBTs are in the off state (not switching). The time during which the voltage can be applied should be limited to short periods (< 60 seconds). Refer to the "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers". IGBT-Driver.com Page 5 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) The maximum dynamic voltage between auxiliary emitters of parallel-connected drivers due to asymmetrical operation at turn-on and turn-off must be limited to the given value. Maximum allowed rate of change of auxiliary emitter voltage of parallel connected drivers. This specification guarantees that the drive information will be transferred reliably even with high rate of change of auxiliary emitter voltages (asymmetrical operation). Dynamic voltages between auxiliary emitters of parallel connected drivers at turn-on and turn-off lead to equalizing currents over the X2 or X3 bus. The peak and RMS values of the resulting current must be limited to the given value. Undervoltage monitoring of the secondary-side supply voltage (Viso to Vee and Vee to COM which correspond with the approximate turn-on and turn-off gate-emitter voltages). If the corresponding voltage drops below this limit on 1SP0335x2Mx (masters), all paralleled IGBTs (master and slaves) are switched off and a fault is transmitted to the status output. If the corresponding voltage drops below this limit on 1SP0335D2Sx (slaves), the corresponding IGBT is switched off. If the IGBT was turned on, a fault will be generated by the gate-monitoring function on the master which will turn off all paralleled IGBT after the corresponding delay. The mean value VGE,mean of all gate voltages (master and all slaves) is filtered and compared to the given values at turn-on and turn-off. If the specified values are exceeded (VGE,mean<VGE,on,min at turn-on resp. VGE,mean>VGE,off,max at turn-off) after the given filter delay, the driver turns off all parallelconnected IGBTs and a fault is transmitted to the status output. A dynamic Vce protection is implemented on the driver. The maximum allowed Vce voltage at turn-on is dynamically adjusted in order to better fit to the IGBT characteristics at turn-on. At the end of the turn-on process the given static value applies. The resulting pulse width of the direct output of the gate drive unit for short-circuit type I (excluding the delay of the gate resistors) is the sum of the response time plus the delay to IGBT turn-off. The turn-off event of the IGBT is delayed by the specified time after the response time. Including the delay of the external fiber-optic links (cable length: 1m). Measured from the transition of the turn-on or turn-off command at the optical transmitter on the host controller side to the direct output of the gate drive unit (excluding the delay of the gate resistors). Output rise and fall times are measured between 10% and 90% of the nominal output swing. The values are given for the driver side of the gate resistors with 2/1uF load. The time constant of the output load in conjunction with the present gate resistors leads to an additional delay at their load side. Delay of external fiber-optic links. Measured from the driver secondary side (ASIC output) to the optical receiver on the host controller. Measured on the host side. The fault status on the secondary side is automatically reset after the specified time. Including the delay of the external fiber-optic links. Measured from the transition of the turn-on or turn-off command at the optical transmitter on the host controller side to the transition of the acknowledge signal at the optical receiver on the host controller side. The gate resistors can be leaded or surface mounted. CONCEPT reserves the right to determine which type will be used. Typically, higher quantities will be produced with SMD resistors and small quantities with leaded resistors. The driver supply voltage VDC is split into two distinct voltages on the driver. The first one is the turnon voltage which is regulated at about 15V. The difference between VDC and the turn-on voltage is the turn-off voltage which is not regulated and mainly dependent on the driver input voltage VDC. The fault status is set as long as the gate monitoring fault is present. The given value applies if the driver goes from the "off state" to the "on state" and the gate-emitter voltage of one or more parallel connected drivers does not turn on. If the driver goes from the "on state" to the "off state" and the gate-emitter voltage of one or more parallel connected drivers does not turn off, the fault status is applied as long as the gate monitoring fault is present. Page 6 INTELLIGENT POWER ELECTRONICS 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Legal Disclaimer This data sheet specifies devices but cannot promise to deliver any specific characteristics. No warranty or guarantee is given - either expressly or implicitly - regarding delivery, performance or suitability. CT-Concept Technologie AG reserves the right to make modifications to its technical data and product specifications at any time without prior notice. The general terms and conditions of delivery of CT-Concept Technologie AG apply. IGBT-Driver.com Page 7 1SP0335x2xx-5SNA0500J650300 Preliminary Data Sheet Ordering Information The general terms and conditions of delivery of CT-Concept Technologie AG apply. Interface Master, Fiber-Optic Interface Master, Fiber-Optic Interface Slave, Electrical Interface 1) 2) 1) 2) CONCEPT Driver Type # Related IGBT 1SP0335V2M1-5SNA0500J650300 1SP0335S2M1-5SNA0500J650300 1SP0335D2S1-5SNA0500J650300 5SNA0500J650300 5SNA0500J650300 5SNA0500J650300 Fiber-optic interface with versatile link (HFBR-2522Z and HFBR-1522Z) Fiber-optic interface with ST (HFBR-2412Z and HFBR-1412Z) See "Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers" Product home page: www.IGBT-Driver.com/go/1SP0335 Refer to www.IGBT-Driver.com/go/nomenclature for information on driver nomenclature Information about Other Products For other drivers, evaluation systems, product documentation and application support Please click onto: www.IGBT-Driver.com Manufacturer CT-Concept Technologie AG Intelligent Power Electronics Renferstrasse 15 CH-2504 Biel-Bienne Switzerland Tel. Fax +41 - 32 - 344 47 47 +41 - 32 - 344 47 40 E-mail Internet Info@IGBT-Driver.com www.IGBT-Driver.com (c) 2010...2012 CT-Concept Technologie AG - Switzerland. We reserve the right to make any technical modifications without prior notice. Page 8 All rights reserved. Version from 2012-02-29 INTELLIGENT POWER ELECTRONICS Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Power Integrations: 1SP0335V2M1-5SNA0500J650300