1062 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole C14 Approvals and Compliances 70 C Description - Panel Mount : Screw-on from front side - Appliance Inlet , Protection class I - Fuseholder for fuse-links 5 x 20 mm - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Solder terminals or quick connect terminals Characteristics - The fuse drawer "Fingergrip" can be removed by hand Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C from front side IP 20 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals or quick connect terminals PA6, black / grey / white, UL 94V-0 appliance inlet/-outlet Fuseholder Rated Power Acceptance @ Ta 23 C Power Acceptance @ Ta > 23C C14 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I 1 or 2 pole, acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2.5 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 1062 Approval Logo Certificates Certification Body Description SEMKO Approvals SEMKO Certificate Number: SE/09137-1A UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 27324 CQC Approvals CQC CCC File Number: CSA Approvals CSA CCC File Number: 27324 Connectors 1 1062 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors 1062 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] +0.2 27.2 - 0 19.7 31.5 - 0 31.3 31 33 R 2.5 +0.2 44 o 2 3. R 3 36 5 36 <4 28 27 Length of the terminal please find at the order code configuration table Derating Curves Fuses 5 x 20 mm (1-pole) 2-pole 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 40 60 80 1.6 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.5 100 Ambient air temperature Ta C 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta C Config. Code 1062|-|H|-|A|B|C|N|-|D|-|E|G|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 1062|-| H |-|A|B|C|N|-|D|-|E|G|O| = Type Type protection class I 1062|-|H|-| A |B|C|N|-|D|-|E|G|O| = Terminals Terminal L Configuration key X Configuration key connection to fuse holder B 1062|-|H|-|A| B |C|N|-|D|-|E|G|O| = Terminals Terminal N Configuration key short solder terminal (L = 4.8 mm) 2 Symbols similar as in table A Connectors 3 1062 Power entry modules without line filter https://www.schurter.com /PG05 Terminal N Configuration key Color Configuration key long solder terminal (L = 8.5 mm) 3 Black A Blade terminal (4.8 x 0.8 mm) 8 Grey B Blade terminal (6.3 x 0.8 mm) 9 White D connection to fuse holder B Symbols similar as in table A 1062|-|H|-|A|B|C|N|-|D|-| E |G|O| = Style 1062|-|H|-|A|B| C |N|-|D|-|E|G|O| = Terminals Terminal Ground Style Configuration key without terminal 0 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Configuration key flange with countersunk holes 1 flange with through holes 2 1062|-|H|-|A|B|C|N|-|D|-|E| G |O| = Dimension S Dimension "S" Configuration key Symbols similar as in table A 00 The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code 1062|-|H|-|A|B|C| N |-|D|-|E|G|O| = Terminal Fuseholder Terminal Fuseholder Configuration key solder terminal 1 1062|-|H|-|A|B|C|N|-| D |-|E|G|O| = Color 1062|-|H|-|A|B|C|N|-|D|-|E|G| O | = Features Features Configuration key dead cover 1 holder for 1 or 2 fuses (text legible, when inlet on top) 4 holder for 1 or 2 fuses (text legible, when inlet on bottom) 5 All Variants Type Terminal L Terminal N Terminal Ground Color Style Features Config. Code protection class I connection to fuse holder Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Black flange with countersunk holes holder for 1 or 2 fuses (text legible, when inlet on top) 1062-X-B881-A-1004 4304.6013 protection class I connection to fuse holder Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Black flange with countersunk holes holder for 1 or 2 fuses (text legible, when inlet on top) 1062-X-B991-A-1004 4304.6014 protection class I connection to fuse holder connection to fuse holder short solder terminal (L = 4.8 mm) Black flange with countersunk holes holder for 1 or 2 fuses (text legible, when inlet on top) 1062-X-BB21-A-1004 4304.6015 protection class I connection to fuse holder connection to fuse holder Blade terminal (4.8 x 0.8 mm) Black flange with countersunk holes holder for 1 or 2 fuses (text legible, when inlet on top) 1062-X-BB81-A-1004 4304.6019 protection class I connection to fuse holder connection to fuse holder Blade terminal (6.3 x 0.8 mm) Black flange with countersunk holes holder for 1 or 2 fuses (text legible, when inlet on top) 1062-X-BB91-A-1004 4304.6020 The listet variants should be available from stock Other versions on request www.schurter.com/contact Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 4 50 Pcs Connectors Order Number 1062 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 1062 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4012 Connector further types to 1062 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 1062 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 1062 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 1062 Connectors 5 1062 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS 01.12.2017 Power Cord further types to 1062 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 4304.6011 4304.6012 4304.6013 4304.6014 4304.6015 4304.6016 4304.6017 4304.6018 4304.6019 4304.6021 4304.601 4304.602 4304.6010 4304.6020