CDD, CE, CN, CV Series Dip Solder and Pierced Eyelet Terminations SPECIFICATIONS ELECTRICAL MECHANICAL Phenolic, glass reinforced per Operati ng Voltage: 800 Vdc (sea level) Contact Retention: 3 Ibs. min. MIL-M-14, type MFH, U.L. 94-0 Current Rating: 3 amp max. Insertion Force: 2 to 16 oz. per approved: color black Dielectric Withstanding Voltage: opposing contact pair when using ermoplastic Polyester, glass rein- 1500Vrms min. .062 (157) steel test blade. forced, U.L. 94-0 approved, color black insulation Resistance: Withdrawal Force: 1 02. min. per conracrs: 5000 megohms min. opposing contact pair when using Cope alloy, gold plated per MIL-G- Voltage Drop: 30 mV max. (1.37) steel test blade. 4, Type li, Grade C, over nickel. TEMPERATURE RANGE MATERIALS INSERTS: ; Dially! Phthalate & Phenolic: INSULATOR: Stainless steel, passivated 65C to +125C (-85'F to +257F) Dially! Phthalate, per MIL-M-14, NOTE: Polyester: U.L. 94V-0 approved, color green All tests are in accordance with -65C to +105C (-85F to +221F) requirements of MIL-C-21097 CONTACT TERMINATIONS Note: All dip solder terminations ACCEPTS are .036 (.91) dia. and fit .042 CODE| G" DIMENSION 3.NO. 24 (1.07) min. dia. p.c. board hole. AWG Nt E 132+ 025 WIRES. 250 + .025 TYR E (3.352 64} (6.35) (64) | po | aa PIERCED EYELET DIP SOLDER Vv (a6 + 64) CODE N CODES E, DD, V MOUNTING STYLES 112-40 UNC-2B INSERT hn THREADED INSERT THRU HOLE FLOAT MOUNT NO EARS CODE 3 CODE 5 CODE 8 CODE 12 ORDERING INFORMATION 3| VT| 50| /9 c N 5 OPTIONS POLARIZATION: 3: Between-Contacts |_ MOUNTING STYLES CONTACT PLATING CODES: 3: Threaded Insert KH:.000010 gold engagement 5: Thru Hole and termination areas 8: Floating Mount KT: .000010 gold engagement area; 12: No Ears Vite vow 0 me tin lead termnan area CONTACT TERMINATIONS: termination areas an N: Pierced Eyelet VN:.000030 gold engagement area; E: Short Dip Solder .000010 gold termination area DD:Medium Dip Solder VT: .000030 gold engagement area; V: Long Dip Solder .000100 min. tin lead termination area SERIES IDENTIFIER: NUMBER OF CONTACT PAIRS: Cc: .125 (3.8) Contact Centers 10, 15, 18, 22, 28, 31, 35, 36, 40, 50 .062 (1.57) P.C. Board INSULATOR MATERIAL: 1: Diallyl Phthalate (green) Standard with VH, VN, and VT platings Not available with KT plating 2: Polyester (black) Standard with KH, KT, VN, and VT platings Not available with VH plating or Code N termination 9: Phenolic (black) Standard with Code N termination We 5005376 0000016 S44 mm Standard options are indicated by bold italic type. Nonstandard items require a factory quotation for price and delivery. 18.125 Contact Centers (3.18 mm) 125 x .145 grid OUTLINE AND DIMENSIONS A Oo Available in all popular sizes from 10 to 50 positions, these low profile .125" contact center connectors accept 1/16 (.062") p.c. boards. Features include a choice of mounting styles, between- contact polarization, standoffs, and a chamfered lead-in guide for the mating p.c. board. The contacts are bifurcated, with dip solder or pierced eyelet terminations on .145" row spacing. The pierced eyelet type are individually replaceable using a simple hand tool. 054~.071 RC. BOARD b +t (1110) 250 (6.35) SEE CONTACT TERMINATIONS a { - 145 + .010 TYR .125 TYR (3.68) (.25) (3.18) (o |[ESCRIERESREE O| Contact Identification: POLARIZATION Numbers: 1, 2,3, ...22,23,......... 44,45, ........... 50 Between-Contacts Letters: A,B,C,... . yr re Z, AA... ce eee AF Vf Polarizing Key Omit: G,1, 0, Q,g,i,0,q Part No. 091-0071-000 See page 34 for further information. | A B c D E FLOATMTG CONTACTS +.005 +.007 +.010 +.005 +.015 +.015 (4.13) (+.18) (+.25) (4.13) (4.38) (.38) 10/20 1.125 1.375 1.535 1.795 2.055 2.118 (28.58) (34.92) (38.99) (45.59) (52.20) (53.80) 15/30 1.750 2.000 2.160 2.420 2.680 2.743 (44.45) (50.80) (54.86) (61.47) (68.07) (69.67) 18/36 2.125 2.375 2.535 2.795 3.055 3.118 (53.98) (60.32) (64.39) (70.99) (77.60) (79.20) 22/44 2.625 2.875 3.035 3.295 3.555 3.618 (66.68) (73.02) (77.09) (83.69) (90.30) (91.90) 28/56 3.375 3.625 3.785 4.045 4.305 4.368 (85.72) (92.08) (96.14) (102.74) (109.35) (110.95) 31/62 3.750 4,000 4.160 4.420 4.680 4.743 (95.25) (101.60) (105.66) (112.27) (118.87) (120.47) 35/70 4.250 4.500 4.660 4.920 5.180 5.243 (107.95) (114.30) (118.36) (124.97) (131.57) (133.17) 36/72 4.375 4.625 4.785 5.045 5.305 5.368 (111.12) (117.48) (121.54) (128.14) (134.75) (136.35) 40/80 4.875 5.125 5.285 5.545 5.805 5.868 (123.82) (130.18) (134.24) (140.84) (147.45) (149.05) 50/100 6.125 6.375 6.535 6.795 7.055 7.118 (155.58) (161.92) (165.99) (172.59) (179.20) (180.80) Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. 17 ME 9005376 0000017 b08Hoods with Cable Clamp Hoods are available for most Viking card-edge connectors with style 5 mounts and suitable contact termination lengths. They are molded in thermoplastic and feature an integral cable clamp for a right-angle cable outlet. The cable clamp has a screw adjustment and accommodates cable sizes from 3/16"(4.76) diameter to 3/8"(9.52) diameter. A hood assembly consists of two main parts, one of which "telescopes" into the other, thus fitting various lengths of connectors. Three different widths (Dim. "A") are available to suit the various connector series. The hood is secured with two self-tapping screws which are provided. Consult the table to find the correct hood part number for your connector series and size. OUTLINE AND DIMENSIONS 3/16" TO 3/8" CABLE OUTLET STELESCOPE 7] 1524 _ (4.76) _(9.52) AT THIS POINT ~y I (26.40) (ies) SL ye Oo \ expo spas alak CONNECTOR (REF) x x ~ (2) -@ J] | L Sa SSS SS See aeaes ~ MOUNTING HOLES @ PES) FOR NO. 4 LF TAPPING SCREWS ot 8 3 8 MOUNTING HOLE (SEE PAGE OF SERIES AND SIZE TO BE USED) CABLE CLAMP SCREW , 3 __t CABLE CLAMP. TE { 10 (2.79) SECTION X-X Connector Series OR Fernow Pathe Perhow batho Perkew patho. Ferkew_"batiNo LV, LZ 330 25-30 036-0097-004 40 036-0097-003 64 036-0097-002 JDD, JE, JN, JV 330 10 036-0097-004 15-25 036-0097-003 28-35 036-0097-002 36-50 036-0097-001 JND, JNK 375 18-25 036-0098-003 28-36 036-0098-002 40-50 036-0098-001 CDD, CE, CN,CV 330 10-18 036-0097-003 22-28 036-0097-002 31-50 036-0097-001 CND, CNK 375 10-18 036-0098-003 22-30 036-0098-002 31-50 036-0098-001 HNG -400 18 036-0099-002 28-31 036-0099-001 AB, ADD, AE, AK, AN, AV 330 6 036-0097-004 10-15 036-0097-003 18-22 036-0097-002 AMD, AMK, AND 400 22 036-0099-002 = 28-43 036-0099-001 Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. $3 M@@ 9005376 0000033 450 aMost Viking card-edge connectors have the option of "between- contacts polarization or "in-contact polarization. Connectors with part number prefix "2" or "3" have grooves or slots between contacts into which the polarizing key is pressed. The appropriate "between-contacts" polarizing key is referenced on the data pages for each series. A Viking part number which Polarizing Keys does not have a prefix of "2" or "3" does not have the "between- contacts polarizing option. If "in-contact" polarizing is desired, a pair of contacts must be removed and replaced by a key as detailed below. Therefore, two circuits are removed in the case of dual "readout" connectors and one circuit is removed in the case of single row connectors. BETWEEN-CONTACTS IN-CONTACT All .100", .125" Contact Centers JDD, JE, JN, JV Series CODD, CE, CN, CV Series Part Number: 091-0071 -000 Material: Polyester Key is pressed into grooves between contacts. SLOT DIMENSIONS Part Number: 091 -0025-000 Material: GF Nylon Key replaces two opposing contacts. Key is pressed into empty contact cavities. A= .050(1.27) Li ION B 35018. 9) SLOT DIMENSIONS A= .070(1.77) B = .350(8.89) . JND, JNK Series al -156 CND, CNK Series ontact Centers AMD, AMK, AND Series and HNG Series Part Number: 091 -0051-000 Material: GF Nylon Key replaces two opposing Part Number: 091-0024-000 Material: GF Polyester Key is pressed into slots contacts. between contacts. Key is pressed into empty contact SLOT DIMENSIONS cavities. A = .050(1.27) SLOT DIMENSIONS B = .350(8.89) A= .070(1.77) B = .350(8.89) ADD, AE, AKC, AN, AV Series HN, HV Series Part Number: 091-0020-012 Material: Copper, Gold Plated Key replaces two opposing contacts. JDD, JE, JN, JV Series Tail is bent 90 after installation. CDD, CE, CN, CV Series SLOT DIMENSIONS A= .100(2.54) B = .350(8.89) Part Number: 091-0114-012 Material: Copper, Gold Plated Key replaces two opposing contacts. =A Tail is bent 90 after installation. t SLOT DIMENSIONS 8 A = .070(1.77) } B = .350(8.89) RECOMMENDED SLOT SIZE Contact Replacement Tools How To Replace Damaged Contacts Wire Wrap , Round Tail Dip Solder and Pierced Eyelet Contacts Only If a contact should become damaged and require replacement, spe- cial tools and replacement contacts are available. The technique and necessary tools are detailed below. Wire Wrap and Round Tail Dip Solder Series AMD, AMK, AND, CND, CNK, HNG, JND, JNK Vikings square wrap terminals and round tail dip solder terminals are retained in the insulator body by means of a press fit. 1. The use of an impact tool is suggested in removing the contact but other means can be used. Select the impact tool according to the chart. The impact tool slips over the tail of the damaged contact and is pushed firmly until the tool trips and drives the contact out. Pierced Eyelet Series AN, CN, HN, JN Vikings pierced eyelet terminals are retained in the insulator body by a dimple at the point where the tail enters the insulator. 1. Using the cut-off tool, cut off the tail at the "dimpled" area and remove the damaged contact. 2. insert a replacement contact into the empty cavity from the front of the connector until! it is completely seated. 3. While holding the contact in the seated position, place the dimple tool over the tail and squeeze to form a dimple on the flat metal at the base of the insulator. The dimple should preferably face out from the center of the connector. The dimple retains the contact in the insulator. 2. Insert a replacement contact into the empty cavity from the front of Ferced Replacement Cur oft Dimple the connector until the tail protrudes on the termination side. ; / ; AN 018-0906-002 115-0109-000 115-0108-000 3. Pull the tail using a pair of pliers until the contact is correctly seated CN 018-0905-002 115-0531-000 115-0532-000 and the tail is of equal length to the other contacts. HN 018-0028-002 115-0109-000 115-0108-000 Replacement Impact JN 018-0905-002 115-0533-000 115-0534-000 Wiw Replacement o/s Series Contact Series Contact Tool 018-1149-002 000407-0085 018-1151-002 000407-0085 000407-0093 JNK 018-1149-002 000407-0085 AMD, AND 018-1140-002 AMK CND 018-1141-002 CNK HNG 018-0526-002 JND 018-1140-002 == ~~ J :| Twist impact we Cut-Off eb + Tool Tool a Dimple Tool me 9005376 COO0034 757 34