SME1900-17 The Communications Edge TM Broadband Surface Mount Mixer Product Features * RF 1600 to 2400 MHz * LO 1400 to 2390 MHz * IF 10 to 250 MHz * High 3IIP: +29 dBm (Typical) * LO Drive: +17 dBm * No Internal Solder Connections Product Photo Specifications Parameter SSB Conversion Loss (Max) RF = 1600-2000 MHz, LO = 1400-2000 MHz RF = 1600-2400 MHz, LO = 1400-2390 MHz Port-to-Port Isolation (Min) L-R = 1600-2000 MHz L-R = 1600-2390 MHz L-I = 1600-2000 MHz L-I = 1600-2390 MHz R-I 3rd Order Input Intercept Point VSWR R-Port = 1400-2000 MHz R-Port = 1400-2390 MHz L-Port = 1600 MHz L-Port = 2000 MHz I-Port 1 dB Conversion Compression Guaranteed +25C -40 to +70C Units Typical dB dB 7.4 8.4 8.4 9.4 8.9 9.9 dB dB dB dB dB dBm 26 22 30 23 25 29 18 15 23 16 19 16 24 17 dBm 1.7:1 1.8:1 2.4:1 1.5:1 1.8:1 +14 1. Measured in a 50-ohm system with nominal LO drive of +17 dBm, low side LO, and downconverter application only, unless otherwise specified. 2. Measured at RF = 1850-1990 MHz, LO = 1610-1750 MHz, IF = 240 MHz, unless otherwise specified. Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature RF Input Power Ordering Information Rating -40 to +70C -65 to +100C +23 dBm at +25C Part No. Description SME1900-17 SME1900-17-PCB Mixer (Available in tape and reel) Fully Assembled Application Circuit WJ Communications, Inc. * Phone: 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com September 2000 SME1900-17 Performance Charts IIP3 vs. Frequency 33 33 32 32 6.6 30 29 LO = +16 dBm 31 30 29 28 LO = +17 dBm 27 26 1600 26 1600 1800 1900 2000 2100 IF = 100 MHz 7.0 7.2 IF = 250 MHz LO = +15 dBm 1700 1800 Frequency (MHz) 1900 2000 7.6 1600 2100 1800 2000 Frequency (MHz) Conversion Loss vs. RF Power Conversion Loss vs. Temperature RF = 1910 MHz 6.7 7.8 LO = 1670 MHz Conversion Loss (dB) Conversion Loss (dB) 7.4 2400 6.0 6.6 7.0 2200 Frequency (MHz) Conversion Loss vs. LO Power 6.6 Conversion Loss (dB) IF = 10 MHz 7.4 27 1700 6.8 Conversion Loss (dB) LO = +18 dBm 28 Conversion Loss vs. RF Frequency LO = +19 dBm LO = +17 dBm 31 Intercept Point (dBm) Intercept Point (dBm) IIP3 vs. Frequency 6.8 6.9 7.0 6.5 RF = 1850 MHz LO = 1610 MHz 7.0 7.5 7.1 8.2 4 6 8 10 12 14 7.2 15 16 16 17 18 8.0 -40 19 20 40 60 Temperature (C) VSWR vs. Frequency IF VSWR vs. Frequency Isolation vs. Frequency 1.3 LO 40 1.5 RF 1.8 1.9 Isolation (dB) VSWR 1.7 LO = 2000 MHz 2.1 2.2 2100 Frequency (MHz) 2300 2500 32 30 L-R 28 24 2.5 1900 L-I 34 26 2.3 1700 80 R-I 38 36 LO = 1600 MHz 1.4 VSWR 0 LO Power (dBm) 1.0 2.6 1500 -20 RF Power (dBm) 0 60 120 180 240 300 360 Frequency (MHz) 420 480 540 22 1400 1600 1800 2000 2200 2400 Frequency (MHz) WJ Communications, Inc. * Phone: 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com September 2000 SME1900-17 Single-Tone IM Products Harmonics of fLO Harmonics of fRF 0 0 1 2 3 4 5 21 27 36 36 29 1 26 0 29 24 24 38 2 62 56 64 58 61 65 3 >80 >80 >80 >80 >80 79 4 >80 >80 >80 >80 >80 >80 5 >80 >80 >80 >80 >80 >80 LO Mult RF Mult LO MHz RF MHz IM Prod MHz dB 0 1 2150 2200 2200 26 0 2 2150 2200 4400 62 0 3 2150 2200 6600 81 0 4 2150 2200 8800 95 0 5 2150 2200 11000 95 1 0 2150 2200 2150 21 -1 1 2150 2200 50 0 -1 2 2150 1100 50 56 -1 3 2150 734 52 87 -1 4 2150 550 50 95 -1 5 2150 440 50 95 2 0 2150 2200 4300 27 -2 1 2150 4350 50 29 -2 2 2150 2175 50 64 -2 3 2150 1450 50 79 -2 4 2150 1088 52 95 -2 5 2150 870 50 95 3 0 2150 2200 6450 36 -3 1 2150 6500 50 24 -3 2 2150 3250 50 58 -3 3 2150 2167 51 83 -3 4 2150 1625 50 94 -3 5 2150 1300 50 94 4 0 2150 2200 8600 36 -4 1 2150 8650 50 24 -4 2 2150 4325 50 61 -4 3 2150 2884 52 81 -4 4 2150 2163 52 95 -4 5 2150 1730 50 95 5 0 2150 2200 10750 29 -5 1 2150 10800 50 38 -5 2 2150 5400 50 65 -5 3 2150 3600 50 79 -5 4 2150 2700 50 93 -5 5 2150 2160 50 95 Test Conditions RF at -10 dBm; LO at +17 dBm RF harmonics and intermodulation products are referenced to a desired signal produced by fLO = 2150 MHz and fRF = 2200 MHz. LO harmonics are referenced to the LO drive signal. WJ Communications, Inc. * Phone: 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com September 2000 SME1900-17 Outline Drawing Land Pattern Mounting Configuration Specifications and information are subject to change without notice. Caution! ESD sensitive device. WJ Communications, Inc. * Phone: 1-800-WJ1-4401 * FAX: 408-433-5649 * e-mail: sales@wj.com * Web site: www.wj.com September 2000