Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00
TM00147
T1-111
ELECTRICAL SPECIFICATIONS AT 25° C
SCHEMATIC
• Operates at pulse repitition rates of 30 Mb/s to 60
Mb/s (includes both the DS3 and the STS-1 rate)
• Has three separate windings which can be config-
ured for both 1:1 and 1:4 impedance ratios
2745AM2
HIGH FREQUENCY MAGNETICS
T3/E3/STS-1 Through Hole Transformer
• Operating temperature range: -40° C to +85° C
• Meets IEC 695, 2-2 flammability requirements
• PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Reliability testing: Shock, vibration, temperature cycling,
temperature - humidity - bias
rebmuNtraP
oitaRsnruT %2± ecnatcudnI
2
niMHµ
RCDΩΩ
Ω
ΩΩxam
egakaeL ecnatcudnI
1
xamHµ gnidniwretnI ecnaticapaC nimFp
57roF ΩΩ
Ω
ΩΩ 57: ΩΩ
Ω
ΩΩ
noitarugifnoC muminiM gnidniwretnI nwodkaerB egatloV smrV
)4-3(:)5-2(:)6-1( )1-6( )6-1( )5-2( )4-3( )5-3( lacipyT htdiwdnaB )Bd3(
lacipyT esiResluP emiT )%09-%01(
2MA54721:1:1562.03.051otzHk04 zHM062 sn4.10051
4ot2tcennoc,caV10.0,zHk001taderusaem.1 caV1.0,zHk01taderusaem.2
1
65
2
4
31
65
2
4
3
CORPORATE
Bel Fuse Inc.
198 V an V orst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
FAR EAST
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
K owloon, Hong K ong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
EUROPE
Bel Fuse Eur ope Ltd.
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
©2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00
TM00147
T1-112
MECHANICAL
2745AM2
HIGH FREQUENCY MAGNETICS
T3/E3/STS-1 Through Hole Transformer
0.56 (14.22)
MAX
0.46 (11.68)
MAX
TERMINAL 1
IDENTIFIER
0.023 (0.584) SQ TYP
(PHOSPHOR BRONZE,
SOLDER COATED)
0.35 (8.89)
MAX
0.110 (2.79)
±0.010 (0.25) 0.150
(3.81)
0.250
(6.35)
123
654
Unless otherwise specified, dimensions are nominal and in inches (millimeters).
