TDK MLCC
US Catalog
Version B11
CGA Series
Automotive Grade Capacitors
Type: CGA2 [EIA CC0402]
CGA3 [EIA CC0603]
CGA4 [EIA CC0805]
CGA5 [EIA CC1206]
CGA6 [EIA CC1210]
Issue date: April 2011
REMINDERS
Please read before using this product
SAFETY REMINDERS
TDK MLCC US Catalog Version B11Page 290
REMINDERS
1. If you intend to use aproduct listed in this catalog for apurpose that may cause loss of life or other
damage, you must contact our company’s sales window.
2. We may modify products or discontinue production of aproduct listed in this catalog without prior
notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each
product listed in this catalog.We strongly recommend that you exchange these delivery specifications
with customers that use one of these products.
4. If you plan to export aproduct listed in this catalog, keep in mind that it may be arestricted item according
to the “Foreign Exchange and Foreign Trade Control Law”.In such cases, it is necessary to acquire export
permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from
our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of
our company or athird party when you use aproduct listed in this catalog.We do not grant license of
these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official
agencies.This catalog does not apply to products that are purchased through other third parties.
TDK MLCC US Catalog Version B11Page 291
CGA Series
Automot ive Grade Capacitors
Type: CGA2 (C1005), CGA3 (C1608),
CGA4 (C 2012), CG A5 (C3216), CGA6 (C3225)
• The CGA series consists of products that can be used
for the power train, safety equipment, etc. of a vehicle
• Qualified to AEC Q200 test standard
• Parts are manufactured using tested and stable
manufacturing proces ses and are subject ed to
increased inspections to guarantee a higher level of
reliability
• A monolithic structure ensures superior mechanical
strength and reliability
• Available in X8R temperature charac teris ti c for up to
150ºC operating temperat ure
• High capacitance has been achieved through
precisi on technol ogies t hat enabl e the use of mult iple
thinner ceramic dielectric layers
• High-accuracy automatic mounting is facilitated
through t he m ai ntenance of very precis e di m ensional
tolerances
• Low stray capacitance ensures high conformity with
nominal values, thereby simplifying the circuit design
process
Applications •Automotive applications
•High reliability requirement applications
•Harsh environment requirement application
•Smart meter
•Base stations
•Noise bypass in automotive
Features
Shape &
Dimensions
Dimensions in mm
Part Number
Construction
Series Name
Rated Voltage (DC)
Nominal Capacitance (pF)
Capacitance Tol erance
Packaging Style
Internal Codes
CGA 5 L 2 X8R 1E 105 K T XXXX
Symbol Length Width
21.00 ±0.05 0.50 ±0.05
31.60 ±0.10 0.80 ±0.10
42.00 ±0.20 1.25 ±0.20
53.20 ±0.20 1.60 ±0.20
63.20 ±0.40 2.50 ±0.30
Symbol Thickness
B0.50 mm
C0.60 mm
E0.80 mm
F0.85 mm
H1.15 mm
J1.25 mm
Symbol Thickness
K1.30 mm
L1.60 mm
M2.00 mm
N2.30 mm
P2.50 mm
Symbol Condition
11 ×R.V.
22 ×R.V.
Symbol Condition
31.5 ×R.V.
41.2 ×R.V.
Temperature
Characteristics
Capacitance
Change
Temperature
Range
C0G 0±30 ppm/ºC -55 to + 125ºC
X5R ±15% -55 to +85ºC
X7R ±15% -55 to +125ºC
X7S ±22% -55 to +125ºC
X7T +22/-33% -55 to +125ºC
X8R ±15% -55 to +150ºC
Packaging Code Style
TTape & Reel
Tolerance Code Tolerance
C±0.25 pF
D±0.50 pF
J±5%
K±10%
M±20%
The capacitance is expressed in three digit codes and
in units of pico Farads (pF). The first and s econd digit s
identif y the f i rst and second s i gni ficant figures of the
capacitance. The thi rd di gi t i dentifies the multi pl i er.
R designates a decimal point.
Capacitance Code Capacitance
0R5 0.5pF
010 1pF
102 1,000pF (1nF)
105 1,000,000pF (1µF)
LBody Length
WBody Width
TBody Height
BTerminal Width
Voltage Code Voltage (DC)
0J 6.3V
1A 10V
1C 16V
1E 25V
1V 35V
Voltage Condition for Life Test
Temperature Characteristic
Dimens io ns L x W (mm)
Thickness T (mm)
Voltage Code Voltage (DC)
1H 50V
2A 100V
2E 250V
2W 450V
2J 630V
CGA4J2X7R1C684K
TDK MLCC US Catalog Version B11Page 304
CGA4 [EIA CC0805]
Capacitance
Range Chart
0.60 mm
1.25 mm
0.85 mm
Standard Thickness
Capacitance Range Chart
Temperature Characteristics: X7R (±15%), X7S (±22%), X8R (±15%), X5R (±15%)
Rated Voltage: 450V (2W), 250V (2E), 100V (2A), 50V (1H), 35V (1V), 25V (1E),16V (1C), 6.3V (0J)
Capacitance
(pF)
Cap
Code
Tolerance
X7R
2E
(250V)
2A
(100V)
1H
(50V)
1V
(35V)
1E
(25V)
1C
(16V)
0J
(6.3V)
1,000 102 K: ±10%
1,500 152
2,200 222
3,300 332
4,700 472
6,800 682
10,000 103
15,000 153
22,000 223
33,000 333
47,000 473
68,000 683
100,000 104
150,000 154
220,000 224
330,000 334
470,000 474
680,000 684
1,000,000 105
1,500,000 155
2,200,000 225
3,300,000 335
4,700,000 475
10,000,000 106
Capacitance
(pF)
Cap
Code
Tolerance
X8R
X7S
X7T
X5R
2A
(100V)
1H
(50V)
1E
(25V)
2A
(100V)
2W
(450V)
2E
(250V)
0J
(6.3V)
10,000 103 K: ±10%
15,000 153
22,000 223
33,000 333
47,000 473
68,000 683
100,000 104
150,000 154
220,000 224
330,000 334
470,000 474
680,000 684
1,000,000 105
10,000,000 106
TDK MLCC US Catalog Version B11Page 306
Capacitance
Range Table CGA4 [EIA CC0805]
Class 2 (Temperature Stable)
Temperature Characteristics: X7R (-55 to +125ºC, ±15%), X6S (-55 to +105ºC, ±22%), X5R (-55 to +85ºC, ±15%), Y5V(-30 to +85ºC, +22/-82%)
TDK Part Number
(Ordering Code)
Rated
Voltage
Capacitance
Tolerance
Thickness
(mm)
CGA4C2X7R1H102K X7R 50V
1,000
±10% 0.60 ±0.10
CGA4C2X7R1H103K X7R 50V
10,000
±10% 0.60 ±0.10
CGA4F2X7R1H104K X7R 50V
100,000
±10% 0.85 ±0.10
CGA4J2X7R1H104K X7R 50V
100,000
±10% 1.25 ±0.20
CGA4J2X7R1H104KT5 X7R 50V
100,000
±10% 1.25 ±0.20
CGA4J2X7R1H154K X7R 50V
150,000
±10% 1.25 ±0.20
CGA4J2X7R1H224K X7R 50V
220,000
±10% 1.25 ±0.20
CGA4J2X7R1H334K X7R 50V
330,000
±10% 1.25 ±0.20
CGA4J3X7R1H474K X7R 50V
470,000
±10% 1.25 ±0.20
CGA4J3X7R1H684K X7R 50V
680,000
±10% 1.25 ±0.20
CGA4J3X7R1H105K X7R 50V
1,000,000
±10% 1.25 ±0.20
CGA4J3X7R1V105K X7R 35V
1,000,000
±10% 1.25 ±0.20
CGA4J1X7R1V225K X7R 35V
2,200,000
±10% 1.25 ±0.20
CGA4J2X7R1E224K X7R 25V
220,000
±10% 1.25 ±0.20
CGA4J2X7R1E474K X7R 25V
470,000
±10% 1.25 ±0.20
CGA4J3X7R1E684K X7R 25V
680,000
±10% 1.25 ±0.20
CGA4J3X7R1E105K X7R 25V
1,000,000
±10% 1.25 ±0.20
CGA4J3X7R1E225K X7R 25V
2,200,000
±10% 1.25 ±0.20
CGA4J1X7R1E335K X7R 25V
3,300,000
±10% 1.25 ±0.20
CGA4J1X7R1E475K X7R 25V
4,700,000
±10% 1.25 ±0.20
CGA4J2X7R1C474K X7R 16V
470,000
±10% 1.25 ±0.20
CGA4J2X7R1C684K X7R 16V
680,000
±10% 1.25 ±0.20
CGA4J2X7R1C105K X7R 16V
1,000,000
±10% 1.25 ±0.20
CGA4J3X7R1C155K X7R 16V
1,500,000
±10% 1.25 ±0.20
CGA4J3X7R1C225K X7R 16V
2,200,000
±10% 1.25 ±0.20
CGA4J3X7R1C475K X7R 16V
4,700,000
±10% 1.25 ±0.20
CGA4J3X5R1A106K X5R 10V
10,000,000
±10% 1.25 ±0.20
CGA4J1X7R0J106K X7R 6.3V
10,000,000
±10% 1.25 ±0.20
CGA4F2X7R2A102K X7R 100V
1,000
±10% 0.85 ±0.10
CGA4F2X7R2A152K X7R 100V
1,500
±10% 0.85 ±0.10
CGA4F2X7R2A222K X7R 100V
2,200
±10% 0.85 ±0.10
CGA4F2X7R2A332K X7R 100V
3,300
±10% 0.85 ±0.10
CGA4F2X7R2A472K X7R 100V
4,700
±10% 0.85 ±0.10
CGA4F2X7R2A682K X7R 100V
6,800
±10% 0.85 ±0.10
CGA4F2X7R2A103K X7R 100V
10,000
±10% 0.85 ±0.10
CGA4J2X7R2A153K X7R 100V
15,000
±10% 1.25 ±0.20
CGA4J2X7R2A223K X7R 100V
22,000
±10% 1.25 ±0.20
CGA4J2X7R2A333K X7R 100V
33,000
±10% 1.25 ±0.20
CGA4J2X7R2A473K X7R 100V
47,000
±10% 1.25 ±0.20
CGA4F2X7R2A683K X7R 100V
68,000
±10% 0.85 ±0.10
CGA4J2X7R2A104K X7R 100V
100,000
±10% 1.25 ±0.20
CGA4F3X7R2E102K X7R 250V
1,000
±10% 0.85 ±0.10
CGA4F3X7R2E152K X7R 250V
1,500
±10% 0.85 ±0.10
CGA4F3X7R2E222K X7R 250V
2,200
±10% 0.85 ±0.10
TDK MLCC US Catalog Version B11Page 316
General
Specifications CGA Series –Automotive Grade Capacitors
No. Item Performance Test or Inspection Method
1External
Appearance No defects which may affect
performance. Inspect with magnifying glass (3×).
2Insulation
Resistance 10,000MΩor 500M Ω•μF min.
(As for the capacitors of rated voltage
16V DC and the item below, 10,000 MΩ
or 100MΩ•μF min.), whichever is
smaller.
Apply rated voltage for 60s. As for the rated voltage
630V DC, apply 500V DC.
3Voltage Proof Withstand test voltage without
insulation breakdown or other
damage.
Above DC voltage shall be applied for 1 to 5s. Charge /
discharge curr ent shall not exceed 50mA.
4Capacitance Within the specified tolerance.
5 Q
(Class 1)
C : Rated capacitance (pF)
See No.4 in this table for measuring condition.
6Dissipation
Factor
(Class 2)
See No.4 in this table for measuring condition.
7Temperature
Characteristics
of Capacitance
(Class1) Capacitance drift within ±0.2% or
±0.05pF, whiche ver lar g er.
Class Rated Voltage Apply voltage
Cla ss 1 100V and under 3 ×rated voltage
Over 100V 1.5 ×rated volt age
Cla ss 2 100V and under 2.5 ×rated volt age
Over 100V 1.5 ×rated volt age
Class Rated
Capacitance Measuring
Frequency Measuring
voltage
Cla ss 1 ≤ 1000pF 1MHz±10% 0.5 -5 Vrms
> 1000pF 1kHz±10%
Cla ss 2 ≤ 10uF 1kHz±10% 1.0±0.2 Vrms
> 10uF 120Hz±20% 0.5±0.2 Vrms
Rated Capacitance Q
C ≥ 30pF 1,000 min.
C < 30pF 400+20×C mi n.
T.C. D.F.
X8R
X7R
C0G
0.03 max.
0.05 max.
0.075 max.
0.1 max.
T.C. Temperature Coefficient
C0G 0 ±30 ppm/ºC
TDK MLCC US Catalog Version B11Page 317
General
Specifications CGA Series –Automotive Grade Capacitors
No. Item Performance Test or Inspection Method
8Temperature
Characteristics
of Capacitance
(Class 2)
Capacitance Change (%) Capacitance shall be measured by the steps shown in
the following table after thermal equilibrium is obtained
for each step.
∆C be calculated ref. STEP 3 reading
Measuring voltage: 0.1, 0.2, 0.5, 1.0Vrms.
9Robustness of
Terminations No sign of termination coming off,
breakage of ceramic, or other abnor m al
signs.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) and apply a pushing
force of 2N (CGA2) or 17.7N (CGA3, CGA4, CGA5,
CGA6) w ith 10±1s.
10 Bending No mechanical damage. Reflow solder the capacitors on P.C. board (shown in
Appendix 2a or Appendix 2b) and bend it for 1mm.
11 Solderability New solder to cover over 75% of
termination.
25% may have pinholes or rough spots
but not concentrated in one spot.
Ceramic surface of A sections shall not
be exposed due to m elting or shifting of
termination mat erial.
Completely soak both terminations in solder at
235±5ºC for 2±0.5s.
Solder: H 63A (JIS Z 3282)
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
Pushing force
P.C. board
Capacitor
1
20
50 F
R230
45 45
A section
No Voltage Applied
X7R: ±15%
X8R: ±15%
Step Temperature (ºC)
1Reference tem p. ±2
2Min. operating temp. ±3
3Reference tem p. ±2
4Max. operating temp. ±2
Unit: mm
TDK MLCC US Catalog Version B11Page 318
General
Specifications CGA Series –Automotive Grade Capacitors
No. Item Performance Test or Inspection Method
12 Resistance to solder heat Completely soak both terminations in solder at
260±5ºC for 5±1s.
Preheating condition
Temp. : 150±10ºC
Time : 1 to 2min.
Flux : Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
Solder : H63A (JIS Z 3282)
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
External
appearance No cracks ar e allowed and t erm inations
shall be covered at least 60% w ith new
solder
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
D.F. (Class 2) Meet the initial spec.
Insulation
Resistance Meet the initial spec.
Voltage
Proof No insulation breakdow n or ot her
damage.
13 Vibration Reflow solder the capacitor on a P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Vibrate the capacitor with following conditions:
Applied force: 5G max.
Frequency: 10-2000Hz
Duration: 20 min.
Cycle : 12 cycles
External
appearance No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
D.F. (Class 2) Meet the initial spec.
Characteristics Change from the
value before test
Cla ss 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Cla ss 2 X7R
X8R ±7.5 %
Rated Capacitance Q
30pF and over 1,000 min.
Under 30pF 400+20×C min.
Characteristics Change from the
value before test
Cla ss 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Cla ss 2 X7R
X8R ±7.5 %
Rated Capacitance Q
30pF and over 1,000 min.
Under 30pF 400+20×C min.
TDK MLCC US Catalog Version B11Page 319
General
Specifications CGA Series –Automotive Grade Capacitors
No. Item Performance Test or Inspection Method
14 Temperature cycle Reflow solder the capacitors on a P.C. board (shown in
Appendix 1a or Appendix 1b) befor e testing.
Expose the capacitor in the conditions step1 through
step 4, and repeat 5 tim es consecutively.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
External
appearance No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
D.F. (Class 2) Meet the initial spec.
Insulation
Resistance Meet the initial spec.
Voltage
proof No insulation breakdown or
other damage.
15 Moisture R esistance Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply t he rated voltage at temperature 85º C and
85%RH f or 1000 +24,0h.
Charge/discharge current shall not exceed 50mA .
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for Class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement .
Use this measurement for initial value.
External
appearance No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
D.F. (Class 2) Characteristics
X7R: 200% of initial spec. max.
X8R: 200% of initial spec. max
Insulation
Resistance 500MΩor 25MΩ•μF min.
(As for the capacitors of rated voltage
16V DC and item below, 500MΩor
5MΩ•μF m in.,) w hichever smaller.
Characteristics Change from the
value before test
Cla ss 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Cla ss 2 X7R
X8R ±7.5 %
Rated Capacitance Q
30pF and over 1,000 min.
Under 30pF 400+20×C min.
Step Temperature (ºC) Time (min.)
1Min. operating temp. ±330 ±3
2Reference Temp. ±22 – 5
3Max. operating temp. ±230 ±2
4Referenc e Temp. ±22 - 5
Characteristics Change from the
value before test
Cla ss 1 C0G Capacitance drift within
±7.5% or ±0.75pF,
whichever larger.
Cla ss 2 X7R
X8R ±12.5 %
Rated Capacitance Q
30pF and over 1,000 min.
Under 30pF 100+10/3×C min.
TDK MLCC US Catalog Version B11Page 320
General
Specifications CGA Series –Automotive Grade Capacitors
No. Item Performance Test or Inspection Method
16 Life Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) befor e testing.
Test condition : maximum operating temperature
±2ºC for 1,000 +48, 0h.
Please r efer t o each part num ber for test voltage.
Charge/discharge current shall not exceed 50mA .
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning:
Voltage treat the capacitors under testing temperatur e
and voltage for 1 hour.
Leave the capacitor in ambient conditions on for
24±2h before measurement.
Use this measurement for initial value.
External
appearance No mechanical damage.
Capacitance
Q
(Class 1)
C : Rated capacitance (pF)
D.F.
(Class 2) Characteristics
X7R: 200% of initial spec. max.
X8R: 200% of initial spec. max
Insulation
Resistance 1,000MΩor 50MΩ•μF min. , whichever
smaller.
(As for the capacitors of rated voltage
16 DC, 1,000 MΩor 10MΩ•μF m in.,)
*As for the initial measurement of capacitors (Class 2) on number 8, 12, 13 and 14, leave capacitors at 150 –10, 0 °C for 1
hour and measure the value after leaving capacitor for 24±2 h in ambient conditions.
Characteristics Change from the
value before test
Cla ss 1 C0G Capacitance drift within
±7.5% or ±0.75pF,
whichever larger.
Cla ss 2 X7R
X8R ±15 %
Rated Capacitance Q
C ≥ 30pF 350 min.
10pF ≤ C < 30pF 275 + 5/2×C min.
C < 10pF 200 + 10×C min .
TDK MLCC US Catalog Version B11Page 321
General
Specifications CGA Series –Automotive Grade Capacitors
Appendix - 1a
P.C. Board f o r relia b ilit y t e s t
Applied for CGA2, CGA3, CGA4, CG A 5
Appendix - 1b
P.C. Board f o r relia b ilit y t e s t
Applied for CGA6
Appendix - 2a
P.C. Board for bending test
Applied for CGA2
Appendix -2b
P.C. Board for bending test
Applied for CGA3, CGA4, CGA5, CGA6
100 mm
Solder Resist Copper
b
a
c
40 mm
Copper
Solder Resist
Slit
40 mm
100 mm
c
b
a
Solder Resist Copper
b
a
1.0 mm
c
40 mm
100 mm
1.0 mm
c
a
b
Solder resist
b
100 mm
Copper
40 mm
Material : Glass Epoxy ( As per JIS C6484 GE4 )
P.C. Board thickness : Appendix-2a 0.8mm
Appendix-1a, 1b, 2b 1.6mm
Copper ( thickness 0.035mm )
Solder resist
Case Code Dimens ions (mm)
Series JIS EIA a b c
CGA2 C1005 CC0402 0.4 1.5 0.5
CGA3 C1608 CC0603 1.0 3.0 1.2
CGA4 C2012 CC0805 1.2 4.0 1.65
CGA5 C3216 CC1206 2.2 5.0 2.0
CGA6 C3225 CC1210 2.2 5.0 2.9
TDK MLCC US Catalog Version B11Page 322
Soldering
Information CGA Series –Automotive Grade Capacitors
Wave Soldering Unit: mm
Type
Symbol
CGA3
[CC0603] CGA4
[CC0805] CGA5
[CC1206]
A0.7 -1.0 1.0 -1.3 2.1 -2.5
B0.8 -1.0 1.0 -1.2 1.1 -1.3
C0.6 -0.8 0.8 -1.1 1.0 -1.3
• Recommended Soldering Land Pattern • Recommended Soldering Profile
A
B
C
Chip capacitor Solder land
Solder resist
Reflow Soldering Unit: mm
Type
Symbol
CGA2
[CC0402] CGA3
[CC0603] CGA4
[CC0805]
A0.3 -0.5 0.6 -0.8 0.9 -1.2
B0.35 -0.45 0.6 -0.8 0.7 -0.9
C0.4 -0.6 0.6 -0.8 0.9 -1.2
Reflow Soldering Unit: mm
Type
Symbol
CGA5
[CC1206] CGA6
[CC1210]
A2.0 -2.4 2.0 -2.4
B1.0 -1.2 1.0 -1.2
C1.1 -1.6 1.9 -2.5
Excessive
solder
Higher tensil e
force on the chip
capacitor may
cause cracking.
Adequate
solder
Insufficient
solder
Small solder fillet
may cause
contact failure or
failure to hold the
chip capacitor to
the P.C. board.
• Recommended Solder Amount
Maximum amount
Minimum amount
Recommended soldering duration
Temp./
Dura.
Solder
Wave Soldering Reflow Soldering
Peak temp
(°C) Duration
(sec.) Peak temp
(°C) Duration
(sec.)
Sn-Pb
Solder 250 max . 3 max. 230 max. 20 max.
Lead-Free
Solder 260 max . 5 max. 260 max. 10 max.
Recommended s ol der c omposit i ons
Sn-37Pb (Sn-Pb solder)
Sn-3.0Ag-0.5Cu (Lead Free Solder)
Preheating Condition
Soldering Case Size -JIS (EIA) Temp. (ºC)
Wave
soldering CGA3(CC0603), CGA4(CC0805),
CGA5(CC1206) ∆T ≤ 150
Reflow
soldering
CGA2(CC0402), CGA3(CC0603),
CGA4(CC0805), CGA5(CC1206) ∆T ≤ 150
CGA6(CC1210) ∆T ≤ 130
Manual
soldering
CGA2(CC0402), CGA3(CC0603),
CGA4(CC0805), CGA5(CC1206) ∆T ≤ 150
CGA6(CC1210) ∆T ≤ 130
Reflow Soldering
Manual soldering
(Solder iron)
∆T
Preheating
3sec. (As short as possible)
0
300
Temp (ºC)
Temp (ºC)
0
∆T
Soldering Natural
cooling
Preheating
Peak
Temp
Over 60 sec.
Peak Temp time
Wave Soldering
Peak
Temp
0
△T
Preheating Soldering Natural
cooling
Over 60 sec. Over 60 sec.
Peak Temp time
Temp. (ºC)
TDK MLCC US Catalog Version B11Page 323
Packaging
Information CGA Series –Automotive Grade Capacitors
• Carrier Tape Configuration
• Chip Quantity Per Reel and Structure of Reel (Paper & Plastic)
• Peel Back Force (Top Tape)
0~15°
Carrier tape Top cover tape
Direction & angle of pull
0.05 –0.7 N
• Carrier tape shall be flexible enough to be
wound around a minim um radius of 30m m with
components in tape.
• The missing of components shall be less than
0.1%
• Components shall not stick to the cover tape.
• The cover tape shall not protrude beyond the
edges of the carrier tape and shall not cover the
sprocket holes.
Paper carrier tape
Pitch hole
Top cover tape
Bottom cover tape Plastic carrier tape
Top cover tape
Pitch hole
Paper Carrier Tape & Reel Plastic Carrier Tape & Reel
Case Code Chip
Thickness
(mm)
Taping
Material
Chip quantity (pcs.)
Series JIS EIA φ178mm (7”)
reel φ330mm (13”)
reel
CGA2 C1005 CC0402 0.50
Paper
10,000 50,000
CGA3 C1608 CC0603 0.80 4,000 10,000
CGA4 C2012 CC0805 0.60 20,000
0.85
10,000
1.25 Plastic 2,000
CGA5 C3216 CC1206
0.60 Paper 4,000
0.85
1.15
Plastic
2,000
1.60 8,000
CGA6 C3225 CC1210
1.25
1.60
2.00 1,000 5,000
2.30
2.50
Drawing directi on Leader
400mm min
Bulk
160mm min. Chips Bulk
160mm min
TDK MLCC US Catalog Version B11Page 324
Additional
Information CGA Series –Automotive Grade Capacitors
• Shape & Dimensions
TDK Corporation es tablished i nternal produc t environmental
assuranc e st andards that i nclude the six hazardous
subst anc es banned by the EU RoHS Directive1enforced on
July 1, 2006 along with additional substances independent l y
banned by TDK and has successfully completed making
general purpose elect ronic components c onform to the
RoHS Directive2.
L
BGBW
T
Terminal electrode
Ceramic dielectric
Internal electrode
345
12
No. NAME MATERIAL
Class 1 Class 2
(1) Ceramic Dielectric CaZrO3BaTiO3
(2) Internal E l ectrode Nickel (Ni)
(3) Termination Copper (Cu)
(4) Nickel (Ni)
(5) Tin (Sn)
• Inside Structure & Material System
• Environmental Information
1. Abbreviat i on for Restriction on Hazardous
Substances, which refers to the regulat i on E U
Directiv e 2002/95/EC on hazardous subs tanc es by
the European Union (EU) effective from July 1, 2006.
The Directive bans the use of six specific hazardous
substances in electric and electronic devices and
products handled wit hi n t he EU. The s i x substances
are lead, merc ury , cadmium, hexavalent chromium,
PBB (polybrominated bi phenyls), and PBDE
(polybrominated diphenyl ethers).
2. This means that, in conformi t y with the EU Direct i ve
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-bas ed flame
retardants, PBB and PBDE, have not been used,
except for exempted applications .
For REACH (SVHC : 15 substances according to ECHA /
October 2008) : All TDK MLCC do not contain these
15 substances.
For European Directi ve 2000/ 53/CE and 2005/673/ CE :
Cadmium, Hexavalent Chromium, Mercury, Lead are
not contained in all TDK MLCC.
For European Directi ve 2003/ 11/CE : Pentabromodiphenyl-
ether, Octabromodiphenyl-ether are not contai ned in
all TDK MLCC.
Case Code Dimens ions (mm)
Series JIS EIA L W T B G
CGA2 C1005 CC0402 1.00 0.50 0.50 0.25 0.30 min.
CGA3 C1608 CC0603 1.60 0.80 0.80 0.30 0.50 min.
CGA4 C2012 CC0805 2.00 1.25 0.60 0.50 0.50 mi n.0.85 0.20 mi n.
1.25
CGA5 C3216 CC1206 3.20 1.60
0.60 0.30 mi n. 1.00 min.
0.85
1.15 0.20 mi n.
1.60
CGA6 C3225 CC1210 3.20 2.50
1.25 0.30 mi n.
1.00 min.
1.60 0.20 mi n.2.00
2.30
2.50 0.30 mi n.