GS1575B / GS9075B HD-LINX® II Multi-Rate SDI Automatic Reclocker
1 of 28GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
www.gennum.com
Features
GS1575B
SMPTE 292M, 259M and 344M compliant
Supports data rates of 143, 177, 270, 360, 540, 1483.5, 1485
Mb/s
Supports DVB-ASI at 270Mb/s
Pb-free and RoHS Compliant
Auto and Manual Modes for rate selection
Standards indication in Auto Mode
4:1 input multiplexer
Loss of Signal (LOS) Output
Lock Detect Output
On-chip Input and Output Termination
Differential 50Ω inputs and outputs
Mute, Bypass and Autobypass functions
SD/HD indication output to control GS1528A Dual Slew-Rate
Cable Driver
Single 3.3V power supply
Operating temperature range: 0°C to 70°C
GS9075B
SMPTE 259M and 344M compliant
Supports data rates of 143, 177, 270, 360, and 540Mb/s
Supports DVB-ASI at 270Mb/s
Pb-free and RoHS Compliant
Auto and Manual Modes for rate selection
Standards indication in Auto Mode
4:1 input multiplexer
Loss of Signal (LOS) Output
Lock Detect Output
On-chip Input and Output Termination
Differential 50Ω inputs and outputs
Mute, Bypass and Autobypass functions
Single 3.3V power supply
Operating temperature range: 0°C to 70°C
Applications
GS1575B
SMPTE 292M, SMPTE 259M and SMPTE 344M Serial Digital
Interfaces
GS9075B
SMPTE 259M and SMPTE 344M Serial Digital Interfaces.
Description
The GS1575B/9075B is a Multi-Rate Serial Digital Reclocker
designed to automatically recover the embedded clock
from a digital video signal and re-time the incoming video
data.
The GS1575B Serial Digital Reclocker will recover the
embedded clock signal and re-time the data from a SMPTE
292M, SMPTE 259M or SMPTE 344M compliant digital
video signal.
The GS9075B Serial Digital Reclocker will recover the
embedded clock signal and re-time the data from a SMPTE
259M or SMPTE 344M compliant digital video signal.
The GS1575B/9075B removes the high frequency jitter
components from the bit-serial stream. Input termination is
on-chip for seamless matching to 50Ω transmission lines.
An LVPECL compliant output interfaces seamlessly to the
GS1578A/GS9078A Cable Driver.
The GS1575B/9075B can operate in either auto or manual
rate selection mode. In Auto mode the device will
automatically detect and lock onto incoming SMPTE SDI
data signals at any supported rate. For single rate data
systems, the GS1575B/9075B can be configured to operate
in Manual mode. In both modes, the device requires only
one external crystal to set the VCO frequency when not
locked and provides adjustment free operation.
In systems which require passing of non-SMPTE data rates,
the GS1575B/9075B can be configured to either
automatically or manually enter a bypass mode in order to
pass the signal without reclocking.
The ASI/177 input pin allows for manual selection of
support of either 177Mb/s or DVB-ASI inputs.
The GS1575B/9075B is Pb-free, and the encapsulation
compound does not contain halogenated flame retardant.
This component and all homogeneous sub-components are
RoHS compliant.
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
2 of 28
GS1575B Functional Block Diagram
GS9075B Functional Block Diagram
XTAL+ XTAL-
XTAL
OUT-
XTAL
OUT+
DDI_SEL[1:0]
DDI 1
DDI 2
DDI 3
DDI 0
LF+ LF- KBB
DDO_MUTE
DDO/DDO
AUTOBYPASS BYPASS
LD
AUTO/MAN
SS[2:0] ASI/177
XTAL
OSC BUFFER
DATA BUFFER
VCO
BYPASS
LOGIC
DIVIDE BY
2,4,6,8,12,16
PHASE
FREQUENCY
DETECTOR
DIVIDE BY
152, 160, 208
CONTROL LOGIC
CHARGE
PUMP
M
U
X
D
A
T
A
M
U
X
M
U
X
RE-TIMER
PHASE
DETECTOR
SD/HD
SCO_ENABLE
SCO/SCO
CLOCK BUFFER
LOS
XTAL+ XTAL-
XTAL
OUT-
XTAL
OUT+
DDI_SEL[1:0]
DDI 1
DDI 2
DDI 3
DDI 0
LF+ LF- KBB
DDO_MUTE
DDO/DDO
AUTOBYPASS BYPASS
LD
AUTO/MAN
SS[2:0] ASI/177
XTAL
OSC BUFFER
DATA BUFFER
VCO
BYPASS
LOGIC
DIVIDE BY
2,4,6,8,12
PHASE
FREQUENCY
DETECTOR
DIVIDE BY
152, 160
CONTROL LOGIC
CHARGE
PUMP
M
U
X
D
A
T
A
M
U
X
M
U
X
RE-TIMER
PHASE
DETECTOR
SD/HD
SCO_ENABLE
SCO/SCO
CLOCK BUFFER
LOS
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
3 of 28
Revision History
Contents
Features.................................................................................................................................................................1
Applications.........................................................................................................................................................1
Description...........................................................................................................................................................1
Revision History .................................................................................................................................................3
1. Pin Out...............................................................................................................................................................5
1.1 GS1575B Pin Assignment ...............................................................................................................5
1.2 GS9075B Pin Assignment ...............................................................................................................6
1.3 Pin Descriptions ................................................................................................................................7
2. Electrical Characteristics ......................................................................................................................... 10
2.1 Absolute Maximum Ratings ....................................................................................................... 10
2.2 DC Electrical Characteristics ..................................................................................................... 10
2.3 AC Electrical Characteristics ..................................................................................................... 11
3. Input / Output Circuits ............................................................................................................................. 13
4. Detailed Description.................................................................................................................................. 16
4.1 Slew Rate Phase Lock Loop (S-PLL) ......................................................................................... 16
4.2 VCO .................................................................................................................................................... 17
4.3 Charge Pump ................................................................................................................................... 17
4.4 Frequency Acquisition Loop — The Phase-Frequency Detector .................................. 18
4.5 Phase Acquisition Loop — The Phase Detector ................................................................... 18
4.6 4:1 Input Mux .................................................................................................................................. 19
4.7 Automatic and Manual Data Rate Selection ......................................................................... 19
4.8 Bypass Mode ................................................................................................................................... 20
4.9 DVB-ASI Operation ....................................................................................................................... 21
4.10 Lock and LOS Indicators ........................................................................................................... 21
4.11 Output Drivers and Serial Clock Outputs ........................................................................... 22
4.12 Output Mute .................................................................................................................................. 22
5. Typical Application Circuits ................................................................................................................... 23
6. Package & Ordering Information .......................................................................................................... 25
6.1 Package Dimensions ..................................................................................................................... 25
6.2 Recommended PCB Footprint ................................................................................................... 26
Version ECR PCN Date Changes and/or Modifications
1 152100 June 2009 Updated document format.
0 141777 August 2006Converting to Preliminary Data Sheet.
Removed ‘Proprietary and Confidential’
footer.
A 141210 July 2006New Document.
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
4 of 28
6.3 Packaging Data ............................................................................................................................... 26
6.4 Solder Reflow Profiles .................................................................................................................. 27
6.5 Ordering Information ................................................................................................................... 28
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
5 of 28
1. Pin Out
1.1 GS1575B Pin Assignment
Figure 1-1: 64-Pin QFN
DDI0
GND
64-pin QFN
(Top View)
1
DDI0_VTT
DDI0
GND
DDI1
DDI1_VTT
DDI1
GND
DDI2
DDI2_VTT
DDI2
GND
DDI3
DDI3_VTT
DDI3
GND
LF+
NC
NC
NC
NC
NC
XTAL-
XTAL+
XTAL_OUT-
XTAL_OUT+
GND
VEE_DDO
VCC_DDO
NC
GND_DRV
VEE_SCO
VCC_SCO
SCO
NC
GND
SCO_ENABLE
SCO
KBB
DDI_SEL0
DDI_SEL1
BYPASS
AUTOBYPASS
VCC_VCO
VEE_VCO
LOCKED
SS0
SS1
SS2
LOS
VCC_DIG
VEE_DIG
GND
VCC_CP
VEE_CP
ASI/177
DDO
DDO
16
17 32
33
48
4964
2
3
4
5
6
7
8
9
10
11
12
13
14
15
18 19 20 21 23 24 25 26 27 28 29 30 3122
34
35
36
37
38
39
40
41
42
43
44
45
46
47
5051525354555657585960
61
6263
LF-
Ground Pad
(bottom of package)
NC
AUTO/MAN
DDO_MUTE
SD/HD
GS1575B
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
6 of 28
1.2 GS9075B Pin Assignment
Figure 1-2: 64-Pin QFN
DDI0
GND
64-pin QFN
(Top View)
1
DDI0_VTT
DDI0
GND
DDI1
DDI1_VTT
DDI1
GND
DDI2
DDI2_VTT
DDI2
GND
DDI3
DDI3_VTT
DDI3
GND
LF+
NC
NC
NC
NC
NC
XTAL-
XTAL+
XTAL_OUT-
XTAL_OUT+
GND
VEE_DDO
VCC_DDO
NC
GND_DRV
VEE_SCO
VCC_SCO
SCO
NC
GND
SCO_ENABLE
SCO
KBB
DDI_SEL0
DDI_SEL1
BYPASS
AUTOBYPASS
VCC_VCO
VEE_VCO
LOCKED
SS0
SS1
SS2
LOS
VCC_DIG
VEE_DIG
GND
VCC_CP
VEE_CP
ASI/177
DDO
DDO
16
17 32
33
48
4964
2
3
4
5
6
7
8
9
10
11
12
13
14
15
18 19 20 21 23 24 25 26 27 28 29 30 3122
34
35
36
37
38
39
40
41
42
43
44
45
46
47
5051525354555657585960
61
6263
LF-
Ground Pad
(bottom of package)
NC
AUTO/MAN
DDO_MUTE
SD
GS9075B
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
7 of 28
1.3 Pin Descriptions
Table 1-1: Pin Descriptions
Pin Number Name Ty p e Description
1, 3 DDI0, DDI0 Input Serial digital differential input 0.
2 DDI0_VTT Passive Center tap of two 50Ω on-chip termination resistors between DDI0 and
DDI0.
4, 8, 12,16, 32,
37, 43, 49, 64
GND Passive Recommended connect to GND.
5, 7 DDI1,DDI1 Input Serial digital differential input 1.
6DDI1_VTT Passive Center tap of two 50Ω on-chip termination resistors between DDI1 and
DDI1.
9, 11 DDI2, DDI2 Input Serial digital differential input 2.
10 DDI2_VTT Passive Center tap of two 50Ω on-chip termination resistors between DDI2 and
DDI2.
13, 15 DDI3, DDI3 Input Serial digital differential input 3.
14 DDI3_VTT Passive Center tap of two 50Ω on-chip termination resistors between DDI3 and
DDI3.
17, 18 DDI_SEL[1:0] Logic Input Serial digital input select.
19 BYPASS Logic Input Bypass the reclocker stage.
When BYPASS is HIGH, it overwrites the AUTOBYPASS setting.
20 AUTOBYPASS Logic Input Automatically bypasses the reclocker stage when the PLL is not locked
This pin is ignored when BYPASS is HIGH.
21 AUTO/MAN Logic Input Auto/Manual select.
When set HIGH, the standard is automatically detected from the input data
rate. When set LOW, the user must program the input standard using the
SS[2:0] pins.
22 VCC_VCO Power Most positive power supply connection for the internal VCO section.
Connect to 3.3V.
23 VEE_VCO Power Most negative power supply connection for the internal VCO section.
Connect to GND.
DDI_SEL1 DDI_SEL0 INPUT SELECTED
00DDI0
01DDI1
10DDI2
11DDI3
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
8 of 28
24, 25, 26SS[2:0] Bi-directional When AUTO/MAN is HIGH, SS[0:2] are outputs, displaying the data rate to
which the PLL has locked.
When AUTO/MAN is LOW, SS[0:2] are inputs, forcing the PLL to lock only to
a selected data rate
.
27 ASI/177 Logic Input When set HIGH, the device disables the 177Mb/s data rate in the data rate
detection circuit. This prevents a false lock to 177Mb/s when using DVB-ASI.
When set LOW, 177Mb/s lock is possible, however, if a 270Mb/s ASI signal is
applied, the device could false lock to the 177MHz signal.
28 LOCKED Output Lock Detect.
This pin is set HIGH by the device when the PLL is locked.
29 LOSOutput Loss of Signal.
Set HIGH when there are no transitions on the active DDI[3:0] input. See
Lock and LOS Indicators on page 21.
30 VCC_DIGPower Most positive power supply connection for the internal glue logic.
Connect to 3.3V.
31 VEE_DIGPower Most negative power supply connection for the internal glue logic.
Connect to GND.
33 SD/HD
(GS1575B only)
Output This signal will be set LOW by the device when the reclocker has locked to
1.485Gbps or 1.485/1.001Gbps, or when a non-SMPTE standard is applied
(i.e. the device is not locked).
It will be set HIGH when the reclocker has locked to 143Mbps, 177Mbps,
270Mbps, 360Mbps, or 540Mbps.
33 SD
(GS9075B only)
Output This signal will go HIGH when the reclocker has locked to the input SD
signal. It will be LOW otherwise.
34 KBB Analog Input Controls the loop bandwidth of the PLL.
Leave this pin floating for serial reclocking applications.
35 SCO_ENABLE Power Serial clock output enable.
Connect to VCC to enable the serial clock output. Connect to GND to disable
the serial clock output.
NOTE: This is not a TTL signal input.
36DDO_MUTE Logic Input Mutes the DDO/DDO outputs. This option is not available in bypass mode.
Table 1-1: Pin Descriptions (Continued)
Pin Number Name Ty p e Description
SS2SS1SS0 DATA RATE
SELECTED/FORCED (Mb/s)
0 0 0 143
0 0 1 177
0 1 0 270
011 360
1 0 0 540
1 0 1 1483.5/1485
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
9 of 28
38, 40 SCO, SCO Output Serial clock output.
When SCO_ENABLE is set HIGH, a serial digital differential clock will be
presented to the application layer at the selected data rate.
39, 45, 54 - 59 NCNo Connect Not connected internally.
41 VCC_SCO Power Most positive power supply connection for the SCO/SCO output driver.
Connect to 3.3V.
42 VEE_SCO Power Most negative power supply connection for the SCO/SCO output driver.
Connect to GND.
43 GND_DRV Passive Recommended connect to GND.
44, 46DDO, DDO Output Differential Serial Digital Outputs.
47 VCC_DDO Power Most positive power supply connection for the DDO/DDO output driver.
Connect to 3.3V.
48 VEE_DDO Power Most negative power supply connection for the DDO/DDO output driver.
Connect to GND.
50, 51 XTAL_OUT+,
XTAL_OUT-
Output Differential outputs of the reference oscillator used for monitoring or test
purposes.
52, 53 XTAL+, XTAL- Input Reference crystal input. Connect to the GO1535 as shown in the Typical
Application Circuits on page 23.
60 VEE_CP Power Most negative power supply connection for the internal charge pump.
Connect to GND.
61VCC_CP Power Most positive power supply connection for the internal charge pump.
Connect to 3.3V.
62, 63 LF+, LF- Passive Loop filter capacitor connection. Connect as shown in the Typical
Application Circuits on page 23.
Center Pad Ground pad on bottom of package.
Solder to main ground plane following recommendations under
Recommended PCB Footprint on page 26.
Table 1-1: Pin Descriptions (Continued)
Pin Number Name Ty p e Description
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
10 of 28
2. Electrical Characteristics
2.1 Absolute Maximum Ratings
2.2 DC Electrical Characteristics
Parameter Value
Supply Voltage +3.6 VDC
Input Voltage Vcc + 0.5V
Operating Temperature Range C to 70°C
Storage Temperature Range -50°C < Ts < 125°C
Input ESD Voltage 1kV
Solder Reflow Temperature 26C
Table 2-1: DC Electrical Characteristics
VCC = 3.3V, TA = 0°C to 70°C, unless otherwise shown
Parameter Symbol Conditions Min Typ Max Units
Supply Voltage VCC Operating Range 3.135 3.3 3.465V
Supply Current ICC SCO enabled,
TA=25°C
215 260mA
ICC SCO disabled,
TA=25°C
195 230 mA
Power Consumption SCO enabled,
TA=25°C
710 mW
SCO disabled,
TA=25°C
645 mW
Logic Inputs
DDI_SEL[1:0], BYPASS,
AUTOBYPASS, AUTO/MAN, ASI/177,
DDO_MUTE
VIH High 2.0 V
VIL Low 0.8 V
Logic Outputs
SD/HD, LOCKED, LOS
VOH 250uA Load 2.8 V
VOL 250uA Load 0.5 V
Bi-Directional Pins (Manual Mode)
SS[2:0], AUTO/MAN = 0
VIH High 2.0 V
VIL Low 0.8 V
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
11 of 28
2.3 AC Electrical Characteristics
Bi-Directional Pins (Auto Mode)
SS[2:0], AUTO/MAN = 1
VOH High, 250uA Load 2.8 V
VOL Low, 250uA Load 0.5 V
XTAL_OUT+, XTAL_OUT- VOH High VCC –V
VOL Low VCC - 0.285 V
SCO_ENABLE 1.5mA of current
delivered
VCC - 0.165– V
CC + 0.165V
Serial Input Voltage Common Mode 1.65 +
(VSID/2)
–V
CC - (VSID/2) V
Serial Output Voltage
SDO/SDO, SCO/SCO
Common Mode VCC - (VOD/2) V
Table 2-1: DC Electrical Characteristics (Continued)
VCC = 3.3V, TA = 0°C to 70°C, unless otherwise shown
Parameter Symbol Conditions Min Typ Max Units
Table 2-2: AC Electrical Characteristics
VCC = 3.3V, TA = 0°C to 70°C, unless otherwise shown
Parameter Symbol Conditions Min Ty p Max Units
Serial Input Data Rate GS1575B 143 1485 Mb/s
GS9075B 143 540 Mb/s
Serial Input Jitter Tolerance Worst case modulation (e.g.
square wave modulation)
143, 270, 360, 1485 Mb/s
0.8 UI
PLL Lock Time - Asynchronous tALOCK––10ms
PLL Lock Time - Synchronous tSLOCKCLF=47nF, SD/HD=0 10 us
tSLOCKCLF=47nF, SD/HD=1 39 us
Serial Output Rise/Fall Time
SDO/SDO and SCO/SCO
(20% - 80%)
trSDO,trSCO50Ω load (on chip) 114 ps
tfSDO,tfSCO50Ω load (on chip) 106–ps
Serial Digital Input Signal
Swing
VSID Differential with internal
100Ω input termination
See Figure 2-1
100 800 mVp-p
Serial Digital Output Signal
Swing
SDO/SDO and SCO/SCO
VOD 100Ω load differential
See Figure 2-2
1400 1600 2200 mVp-p
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
12 of 28
Figure 2-1: Serial Digital Input Signal Swing
Figure 2-2: Serial Digital Output Signal Swing
Serial Output Jitter
SDO/SDO and SCO/SCO
KBB = Float
PRN, 223-1
Measurement is output jitter
that includes input jitter from
BERT.
tOJ 143 Mb/s 0.02 UI
tOJ 177 Mb/s 0.02 UI
tOJ 270 Mb/s 0.02 0.09 UI
tOJ 360 Mb/s 0.03 UI
tOJ 540 Mb/s 0.03 0.09 UI
tOJ 1485 Mb/s (GS1575B only) 0.060.13 UI
tOJ Bypass 0.060.13 UI
Loop Bandwidth BWLOOP 1.485 Gb/s, KBB = FLOAT
(GS1575B only)
–1.75–MHz
BWLOOP 1.485 Gb/s, KBB = GND,
<0.1dB Peaking
(GS1575B only)
–3.2–MHz
BWLOOP 270 Mb/s, KBB = FLOAT 520 KHz
BWLOOP 270 Mb/s, KBB = GND 1000 KHz
Table 2-2: AC Electrical Characteristics (Continued)
VCC = 3.3V, TA = 0°C to 70°C, unless otherwise shown
Parameter Symbol Conditions Min Ty p Max Units
V
SID
V
SID
2
V
SID
2
V
SID
2
+
0
V
SID
2
_
V
SID
2
V
CC
_
V
SID
2
V
CC
_
V
CC
V
DD
Single-Ended Swing (DDIx)
Single-Ended Swing (DDIx)
Differential Swing (DDIx-DDIx)
V
OD
V
OD
2
V
OD
2
V
OD
2
+
0
V
OD
2
_
V
OD
2
V
CC
_
V
OD
2
V
CC
_
V
CC
V
DD
Single-Ended Swing (DDO, SCO)
Single-Ended Swing (DDO, SCO)
Differential Swing (DDO-DDO)
(SCO-SCO)
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
13 of 28
3. Input / Output Circuits
Figure 3-1: TTL Inputs
Figure 3-2: Loop Filter
Figure 3-3: Crystal Input
V
REF
LF+ LF-
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
14 of 28
Figure 3-4: Crystal Output Buffer
Figure 3-5: Serial Data Outputs, Serial Clock Outputs
Figure 3-6: KBB
Figure 3-7: Indicator Outputs: SD/HD, LOCKED, LOS
1K
1K
XTAL OUT-
XTAL OUT+
50
SDO/SCO SDO/SCO
50
500R
V
REF
KBB
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
15 of 28
Figure 3-8: Standard Select/Indication Bi-directional Pins
Figure 3-9: Serial Data Inputs
vREF
SS[2:0]
50
DDI[3:0]
DDI[3:0]
1k 1k
50
DDI_VTT
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
16 of 28
4. Detailed Description
The GS1575B/9075B is a Multi-Rate Serial Digital Reclocker designed to automatically
recover the embedded clock from a digital video signal and re-time the incoming video
data.
The GS1575B will recover the embedded clock signal and re-time the data from a SMPTE
292M, SMPTE 259M or SMPTE 344M compliant digital video signal.
The GS9075B will recover the embedded clock signal and re-time the data from a SMPTE
259M or SMPTE 344M compliant digital video signal.
Using the functional block diagram (page 2) as a guide, Slew Rate Phase Lock Loop
(S-PLL) on page 16 to Output Mute on page 22 describes each aspect of the
GS1575B/9075B in detail.
4.1 Slew Rate Phase Lock Loop (S-PLL)
The term “slew” refers to the output phase of the PLL in response to a step change at the
input. Linear PLLs have an output phase response characterized by an exponential
response whereas an S-PLL’s output is a ramp response (see Figure 4-1). Because of this
non-linear response characteristic, traditional small signal analysis is not possible with
an S-PLL.
Figure 4-1: PLL Characteristics
0.2
0.1
0.0
INPUT
OUTPUT
SLEW PLL RESPONSE
PHASE (UI)
0.2
0.1
0.0
INPUT
OUTPUT
LINEAR (CONVENTIONAL) PLL RESPONSE
PHASE (UI)
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
17 of 28
The S-PLL offers several advantages over the linear PLL. The Loop Bandwidth of an
S-PLL is independent of the transition density of the input data. Pseudo-random data has
a transition density of 0.5 verses a pathological signal which has a transition density of
0.05. The loop bandwidth of a linear PLL will change proportionally with this change in
transition density. With an S-PLL, the loop bandwidth is defined by the jitter at the data
input. This translates to infinite loop bandwidth with a zero jitter input signal. This
allows the loop to correct for small variations in the input jitter quickly, resulting in very
low output jitter. The loop bandwidth of the GS1575B/9075B’s PLL is defined at 0.2UI of
input jitter.
The PLL consists of two acquisition loops. First is the Frequency Acquisition (FA) loop.
This loop is active when the device is not locked and is used to achieve lock to the
supported data rates. Second is the phase acquisition (PA) loop. Once locked, the PA loop
tracks the incoming data and makes phased corrections to produce a re-clocked output.
4.2 VCO
The internal VCO of the GS1575B/9075B is a ring oscillator. It is trimmed at the time of
manufacture to capture all data rates over temperature and operation voltage ranges.
Integrated into the VCO is a series of programmable dividers used to achieve all serial
data rates, as well as additional dividers for the frequency acquisition loop.
4.3 Charge Pump
A common charge pump is used for the PLL of the GS1575B/9075B.
During frequency acquisition, the charge pump has two states, “pump-up” and
“pump-down,” which is produced by a leading or lagging phase difference between the
input and the VCO frequency.
During phase acquisition, there are two levels of “pump-up” and two levels of “pump
down” produced for leading and lagging phase difference between the input and VCO
frequency. This is to allow for greater precision of VCO control.
The charge pump produces these signals by holding the integrated frequency
information on the external loop-filter capacitor, CLF. The instantaneous frequency
information is the result of the current flowing through an internal resistor connected to
the loop-filter capacitor.
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
18 of 28
4.4 Frequency Acquisition Loop — The Phase-Frequency Detector
An external crystal of 14.140 MHz is used as a reference to keep the VCO centered at the
last known data rate. This allows the device to achieve a fast synchronous lock,
especially in cases where a known data rate is interrupted. The crystal reference is also
used to clock internal timers and counters. To keep the optimal performance of the
reclocker over all operating conditions, the crystal frequency must be 14.140 MHz,
+/-50ppm. The GO1535 meets this specification and is available from GENNUM.
The VCO is divided by a selected ratio which is dependant on the input data rate. The
resultant is then compared to the crystal frequency. If the divided VCO frequency and
the crystal frequency are within 1% of each other, the PLL is considered to be locked to
the input data rate.
4.5 Phase Acquisition Loop — The Phase Detector
The phase detector is a digital quadrature phase detector. It indicates whether the input
data is leading or lagging with respect to a clock that is in phase with the VCO (I-clk) and
a quadrature clock (Q-clk). When the phase acquisition loop (PA loop) is locked, the
input data transition is aligned to the falling edge of I-clk and the output data is re-timed
on the rising edge of I-clk. During high input jitter conditions (>0.25UI), Q-clk will
sample a different value than I-clk. In this condition, two extra phase correction signals
will be generated which instructs the charge pump to create larger frequency
corrections for the VCO.
Figure 4-2: Phase Detector Characteristics
When the PA loop is active, the crystal frequency and the incoming data rate are
compared. If the resultant is more that 2%, the PLL is considered to be unlocked and the
system jumps to the FA loop.
i-PHASE ALIGNMENT
EDGE
DATA RE-TIMING
EDGE
q-PHASE ALIGNMENT
EDGE
0.25UI 0.8UI
I-clk
q-clk
INPUT DATA
WITH JITTER
RE-TIMED
OUTPUT DATA
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
19 of 28
4.6 4:1 Input Mux
The 4:1 input mux allows the connection of four independent streams of video/data.
There are four differential inputs (DDI[3:0] and DDI[3:0]). The active channel can be
selected via the DDI_SEL[1:0] pins. Table 4-1 shows the input selected for a given state
at DDI_SEL[1:0].
The DDI inputs are designed to be DC interfaced with the output of the GS1524A/9064A
Cable Equalizer. There are on chip 50Ω termination resistors which come to a common
point at the DDI_VT pins. Connect a 10nF capacitor to this pin and connect the other end
of the capacitor to ground. This terminates the transmission line at the inputs for
optimum performance.
If only one input pair is used, connect the unused positive inputs to +3.3V and leave the
unused negative inputs floating. This helps to eliminate crosstalk from potential noise
that would couple to the unused input pair.
4.7 Automatic and Manual Data Rate Selection
The GS1575B/9075B can be configured to manually lock to a specific data rate or
automatically search for and lock to the incoming data rate. The AUTO/MAN pin selects
automatic data rate detection mode (Auto mode) when HIGH and manual data rate
selection mode (Manual mode) when LOW.
In Auto mode, the SS[2:0] bi-directional pins become outputs and the bit pattern
indicates the data rate that the PLL is locked to (or previously locked to). The "search
algorithm" cycles through the data rates and starts over if that data rate is not found (see
Figure 4-3).
Figure 4-3: Data Rate Search Pattern
Table 4-1: Bit Pattern for Input Select
DDI_SEL[1:0] Selected Input
00 DDI0
01 DDI1
10 DDI2
11 DDI3
143 Mb/s 177 Mb/s 270Mb/s 360 Mb/s
540 Mb/s
POWER-UP
1.485Mb/s
(GS1575B only)
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
20 of 28
In Manual mode, the SS[2:0] pins become inputs and the data rate can be programmed
by the application layer. In this mode, the search algorithm is disabled and the PLL will
only lock to the data rate selected.
Table 4-2 shows the SS[2:0] pin settings for either the data rate selected (in Manual
mode) or the data rate that the PLL has locked to (in Auto mode).
4.8 Bypass Mode
In Bypass mode, the GS1575B/9075B passes the data at the inputs directly to the outputs.
There are two pins that control the bypass function: BYPASS and AUTOBYPASS.
When BYPASS is set HIGH by the application layer, the GS1575B/9075B will be in
Bypass mode.
When AUTOBYPASS is set HIGH by the application layer, the GS1575B/9075B will be
configured to enter Bypass mode only when the PLL has not locked to a data rate. When
BYPASS is set HIGH, AUTOBYPASS will be ignored.
When the PLL is not locked, and both BYPASS and AUTOBYPASS are set LOW, the serial
digital output DDO/DDO will produce invalid data.
Table 4-2: Data Rate Indication/Selection Bit Pattern
SS[2:0] Data Rate (Mb/s)
000 143
001 177
010 270
011 360
100 540
101* 1485/1483.5
* This setting only applies to the GS1575B. For the GS9075B, when AUTO/MAN is LOW, the pin
settings SS[0:2] = 101 will be ignored by the device.
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
21 of 28
4.9 DVB-ASI Operation
The GS1575B/9075B will also re-clock DVB-ASI at 270 Mb/s. When reclocking DVB-ASI
data set the ASI/177 pin HIGH to prevent a false lock to 177Mb/s. If ASI/177 is not set
HIGH, a false lock may occur since there is a harmonic present in idle patterns (K28.5)
which is very close the 177 Mb/s data rate (EIC 1179). Note that setting the ASI/177 pin
HIGH will disable the 177 Mb/s search when the device is in Auto mode, consequently
the GS1575B/9075B will not lock to that data rate.
4.10 Lock and LOS Indicators
The LOCKED signal is an active high output which indicates when the PLL is locked.
The internal lock logic of the GS1575B/9075B includes a system which monitors the
Frequency Acquisition Loop and the Phase Acquisition Loop as well as a monitor to
detect harmonic lock.
The LOS (Loss of Signal) output is an active HIGH output which indicates the absence of
data transitions at the DDIx input. In order for this output to be asserted, transitions must
not be present for a period of typically 5.14 us. After this output has been asserted, LOS
will deassert typically 5.14 us after the appearance of a transition at the DDIx input. This
timing relationship is shown in Figure 4-4:
Figure 4-4: LOS signal timing
NOTE: LOS is sensitive to transitions appearing at the input, and does not distinguish
between transitions caused by input data, and transitions due to noise.
DATA
LOS
5.14 us 5.14 us
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
22 of 28
4.11 Output Drivers and Serial Clock Outputs
The device’s serial digital data outputs (DDO/DDO) have a nominal voltage of 800mv
single ended or 1600mV differential when terminated into a 50Ω load.
The GS1575B/9075B may also be configured to output a serial clock at the data output
rate. The internal serial clock output block is powered via the SCO_ENABLE pin. When
SCO_ENABLE is connected to VCC, a differential serial clock output will be present on
SCO/SCO. Otherwise, when SCO_ENABLE is connected to GND, the clock output block
will be powered down and the device will have reduced power consumption.
NOTE: The SCO_ENABLE signal should have a 1.5mA drive strength to maintain a
supply voltage of 3.3 +/- 0.165V.
Clock and data alignment is shown in Figure 4-5.
Figure 4-5: Clock and Data Alignment
4.12 Output Mute
The DDO_MUTE pin is provided to allow muting of the re-timed output.
When the PLL is locked and the device is reclocking, setting DDO_MUTE = LOW will
force the serial digital outputs DDO/DDO to mute. However, if the GS1575B/9075B is in
Bypass mode, (AUTOBYPASS = HIGH and/or BYPASS = HIGH), DDO_MUTE will have no
effect on the output.
DATA
SCLK
t
CD
For HD-SDI: t
CD
= 32ps (typ.), 36ps (max.)
For SD-SDI: t
CD
= 30ps (typ.), 38ps (max.)
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
23 of 28
5. Typical Application Circuits
Figure 5-1: GS1575B Typical Application Circuit
ASI_177
DDI_SEL1
SDO_MUTE
DDI_SEL0
LOCKED
SD/HD
3.3V
3.3V
3.3V
3.3V
10n
10n
10n
10n
47n
GS1575B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
DDI0
DDI0_VT
DDI0
GND
DDI1
DDI1_VT
DDI1
GND
DDI2
DDI2_VT
DDI2
GND
DDI3
DDI3_VT
DDI3
GND
DDI_SEL0
DDI_SEL1
BYPASS
AUTOBYPASS
AUTO/MAN
VCC_VCO
VEE_VC0
SS0
SS1
SS2
ASI/177
LOCKED
LOS
VCC_DIG
VEE_DIG
GND
SD/HD
KBB
SCO_ENABLE
DDO_MUTE
GND
NC
SCO
VCC_SCO
VEE_SCO
GND
DDO
NC
DDO
VCC_DDO
VEE_DDO
GND
XTAL_OUT+
XTAL_OUT-
XTAL+
XTAL-
NC
VEE_CP
VCC_CP
LF-
LF+
GND
10n
(14.140MHz)
10n
10n
10n
DATA INPUT 1
DATA INPUT 0
DATA INPUT 3
DATA INPUT 2
DATA OUTPUT
Zo = 50
Zo = 50
Zo = 50
Zo = 50
Zo = 50
3.3V
10n
100
GO1535
Note: All resistors in ohms and all capacitors in Farads.
NC
NC
NC
NC
NC
SCO
CLOCK OUTPUT
Zo = 50
LOS
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
24 of 28
Figure 5-2: GS9075B Typical Application Circuit
ASI_177
DDI_SEL1
SDO_MUTE
DDI_SEL0
LOCKED
SD
3.3V
3.3V
3.3V
3.3V
10n
10n
10n
10n
47n
GS9075B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
DDI0
DDI0_VT
DDI0
GND
DDI1
DDI1_VT
DDI1
GND
DDI2
DDI2_VT
DDI2
GND
DDI3
DDI3_VT
DDI3
GND
DDI_SEL0
DDI_SEL1
BYPASS
AUTOBYPASS
AUTO/MAN
VCC_VCO
VEE_VC0
SS0
SS1
SS2
ASI/177
LOCKED
LOS
VCC_DIG
VEE_DIG
GND
SD
KBB
SCO_ENABLE
DDO_MUTE
GND
NC
SCO
VCC_SCO
VEE_SCO
GND
DDO
NC
DDO
VCC_DDO
VEE_DDO
GND
XTAL_OUT+
XTAL_OUT-
XTAL+
XTAL-
NC
VEE_CP
VCC_CP
LF-
LF+
GND
10n
(14.140MHz)
10n
10n
10n
DATA INPUT 1
DATA INPUT 0
DATA INPUT 3
DATA INPUT 2
DATA OUTPUT
Zo = 50
Zo = 50
Zo = 50
Zo = 50
Zo = 50
3.3V
10n
100
GO1535
Note: All resistors in ohms and all capacitors in Farads.
NC
NC
NC
NC
NC
SCO
CLOCK OUTPUT
Zo = 50
LOS
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
25 of 28
6. Package & Ordering Information
6.1 Package Dimensions
A
B
9.00
4.50
4.50
9.00
2X
2X
0.15
C
0.15
C
0.10
C
0.08
C
64X
SEATING PLANE
0.90 +/- 0.10
+0.03
0.02-0.02
0.20 REF
C
7.10+/-0.15
3.55
0.40+/-0.05
7.10+/-0.15
3.55
0.25+/-0.05
64X 0.10
C
AB
C
0.05
0.50
ALL DIMENSIONS IN MM
PIN 1 AREA CENTRE TAB
45°
45°
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
26 of 28
6.2 Recommended PCB Footprint
The center pad of the PCB footprint should be connected to the ground plane by a
minimum of 36 vias.
NOTE: Suggested dimensions only. Final dimensions should conform to customer
design rules and process optimizations.
6.3 Packaging Data
NOTE: All dimensions
are in millimeters.
7.10
7.10
8.70
8.70
0.50 0.25
0.55
CENTER PAD
Parameter Value
Package Type 9mm x 9mm 64-pin QFN
Moisture Sensitivity Level 3
Junction to Case Thermal Resistance,
θ
j-c 9.1°C/W
Junction to Air Thermal Resistance,
θ
j-a (at zero
airflow)
21.5°C/W
Psi,
Ψ
0.2°C/W
Pb-free and RoHS Compliant Yes
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
27 of 28
6.4 Solder Reflow Profiles
The device is manufactured with Matte-Sn terminations and is compatible with both
standard eutectic and Pb-free solder reflow profiles. MSL qualification was performed
using the maximum Pb-free solder reflow profile shown in Figure 6-1. The
recommended standard Pb solder reflow profile is shown in Figure 6-2.
Figure 6-1: Maximum Pb-free Solder Reflow Profile (Preferred)
Figure 6-2: Standard Pb Solder Reflow Profile
25°C
150°C
200°C
217°C
260°C
250°C
Time
Temperature
8 min. max
60-180 sec. max
60-150 sec.
20-40 sec.
3°C/sec max
6°C/sec max
25°C
100°C
150°C
183°C
230°C
220°C
Time
Temperature
6 min. max
120 sec. max
60-150 sec.
10-20 sec.
3°C/sec max
6°C/sec max
OTTAWA
232 Herzberg Road, Suite 101
Kanata, Ontario K2K 2A1
Canada
Phone: +1 (613) 270-0458
Fax: +1 (613) 270-0429
CALGARY
3553 - 31st St. N.W., Suite 210
Calgary, Alberta T2L 2K7
Canada
Phone: +1 (403) 284-2672
UNITED KINGDOM
North Building, Walden Court
Parsonage Lane,
Bishop’s Stortford Hertfordshire, CM23 5DB
United Kingdom
Phone: +44 1279 714170
Fax: +44 1279 714171
INDIA
#208(A), Nirmala Plaza,
Airport Road, Forest Park Square
Bhubaneswar 751009
India
Phone: +91 (674) 653-4815
Fax: +91 (674) 259-5733
SNOWBUSH IP - A DIVISION OF GENNUM
439 University Ave. Suite 1700
Toronto, Ontario M5G 1Y8
Canada
Phone: +1 (416) 925-5643
Fax: +1 (416) 925-0581
E-mail: sales@snowbush.com
Web Site: http://www.snowbush.com
MEXICO
288-A Paseo de Maravillas
Jesus Ma., Aguascalientes
Mexico 20900
Phone: +1 (416) 848-0328
JAPAN KK
Shinjuku Green Tower Building 27F
6-14-1, Nishi Shinjuku
Shinjuku-ku, Tokyo, 160-0023
Japan
Phone: +81 (03) 3349-5501
Fax: +81 (03) 3349-5505
E-mail: gennum-japan@gennum.com
Web Site: http://www.gennum.co.jp
TAI W AN
6F-4, No.51, Sec.2, Keelung Rd.
Sinyi District, Taipei City 11502
Taiwan R.O.C.
Phone: (886) 2-8732-8879
Fax: (886) 2-8732-8870
E-mail: gennum-taiwan@gennum.com
GERMANY
Hainbuchenstraße 2
80935 Muenchen (Munich), Germany
Phone: +49-89-35831696
Fax: +49-89-35804653
E-mail: gennum-germany@gennum.com
NORTH AMERICA WESTERN REGION
Bayshore Plaza
2107 N 1st Street, Suite #300
San Jose, CA 95131
United States
Phone: +1 (408) 392-9454
Fax: +1 (408) 392-9427
E-mail: naw_sales@gennum.com
NORTH AMERICA EASTERN REGION
4281 Harvester Road
Burlington, Ontario L7L 5M4
Canada
Phone: +1 (905) 632-2996
Fax: +1 (905) 632-2055
E-mail: nae_sales@gennum.com
KOREA
8F Jinnex Lakeview Bldg.
65-2, Bangidong, Songpagu
Seoul, Korea 138-828
Phone: +82-2-414-2991
Fax: +82-2-414-2998
E-mail: gennum-korea@gennum.com
DOCUMENT IDENTIFICATION
DATA SHEET
The product is in production. Gennum reserves the right to make changes to
the product at any time without notice to improve reliability, function or
design, in order to provide the best product possible.
GS1575B / GS9075B HD-LINX® II Multi-Rate SDI
Automatic Reclocker
Data Sheet
40063 - 1 June 2009
28 of 28
28
Gennum Corporation assumes no liability for any errors or omissions in this document, or for the use of the circuits or devices described herein. The sale of
the circuit or device described herein does not imply any patent license, and Gennum makes no representation that the circuit or device is free from patent
infringement.
All other trademarks mentioned are the properties of their respective owners.
GENNUM and the Gennum logo are registered trademarks of Gennum Corporation.
© Copyright 2006 Gennum Corporation. All rights reserved.
www.gennum.com
GENNUM CORPORATE HEADQUARTERS
4281 Harvester Road, Burlington, Ontario L7L 5M4 Canada
Phone: +1 (905) 632-2996 Fax: +1 (905) 632-2055
E-mail: corporate@gennum.com www.gennum.com
CAUTION
ELECTROSTATIC SENSITIVE DEVICES
DO NOT OPEN PACKAGES OR HANDLE EXCEPT AT A
STATIC-FREE WORKSTATION
6.5 Ordering Information
Part Number Package Temperature Range
GS1575B GS1575BCNE3 Pb-free 64-pin QFN C to 70°C
GS9075B GS9075BCNE3 Pb-free 64-pin QFN C to 70°C