08C02SS Ordering number : EN8513 NPN Epitaxial Planar Silicon Transistor 08C02SS Low-Frequency General-Purpose Amplifier Applications Applications * Low-frequency Amplifer, high-speed switching, DC / DC converter, muting circuit. Features * * * Large current capacitance. Low collector-to-emitter saturation voltage (resistance): RCE(sat) typ=240m [IC=1A, IB=50mA]. Ultrasmall package facilitates miniaturization in end products. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 15 Collector-to-Emitter Voltage VCEO 8 V Emitter-to-Base Voltage VEBO 5 V 0.8 A Collector Current IC ICP PC Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg Mounted on a glass epoxy board (20301.6mm) V 1.6 A 200 mW 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Conditions VCB=12V, IE=0A VEB=4V, IC=0A VCE=2V, IC=50mA Ratings min typ 300 VCE=2V, IC=50mA VCB=10V, f=1MHz IC=1mA, RBE= IE=10A, IC=0A 100 nA 100 nA 800 440 MHz 6 IC=30mA, IB=0.6mA IC=400mA, IB=20mA IC=400mA, IB=20mA IC=10A, IE=0A Unit max pF 17 40 mV 110 250 mV 0.9 1.2 V 15 V 8 V 5 V Marking : YT Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 90505EA MS IM TA-100372 No.8513-1/4 08C02SS Package Dimensions unit : mm 7029-002 Top View 0.3 1.4 0.25 0.8 1.4 3 2 1 0.1 0.3 0.2 0.07 0.6 0.45 2 1 : Base 2 : Emitter 3 : Collector 0.07 1 3 SANYO : SSFP Bottom View IC -- VBE 1000 hFE -- IC 1000 VCE=2V VCE=2V Ta=75C DC Current Gain, hFE 400 --25C 600 Ta=75 C 25C --25C 3 2 200 0 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 3 2 100 7 5 C C 75 --25 = Ta C 25 10 7 5 3 3 2 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 5 7 1000 IT05681 VCE(sat) -- IC 5 IC / IB=20 3 2 2 IT05680 VCE(sat) -- IC 1000 7 5 1.0 1.0 100 1.0 1.2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 25C 5 IC / IB=50 3 2 100 7 C 5 =7 a T C 5 --2 5 3 2 25 C Collector Current, IC -- mA 7 800 10 7 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 1000 IT05682 5 1.0 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 1000 IT05683 No.8513-2/4 08C02SS VBE(sat) -- IC 2 1.0 Ta= --25C 7 75C 25C 5 3 1.0 2 3 5 7 10 2 3 5 7 100 2 3 f=1MHz 5 7 7 2 3 5 5 3 2 100 7 2 10 3 IT05685 Ron -- IB f=1MHz 1k OUT IN 5 ON Resistance, Ron -- Gain-Bandwidth Product, f T -- MHz 7 10 VCE=2V 1k 3 IB 2 1.0 7 5 3 2 7 5 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05686 Collector Current, IC -- mA PC -- Ta 250 Collector Dissipation, PC -- mW 10 Collector-to-Base Voltage, VCB -- V f T -- IC 1000 2 3 1.0 5 7 1000 IT05684 Collector Current, IC -- mA Cob -- VCB 3 IC / IB=20 Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 0.1 0.1 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT10243 M 200 ou nt 150 ed on ag las se po xy bo ard 100 (2 0 30 1 .6m 50 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT05687 No.8513-3/4 08C02SS Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2005. Specifications and information herein are subject to change without notice. PS No.8513-4/4