Mill-Max-Mfg.Corp.,P.O .Bo x 300, 190 Pine Hollow Road,Oyster Bay, NY 11771-0300.T el:516-922-6000 F ax: 516-922-9253
102
SPECIFY PLATING CODE XX= 91 93
Sleeve (Pin)
Contact (Clip) 200µ” Sn/Pb 200µ” Sn/Pb
10µ” Au 30µ”Au
SURFACE MOUNT PIN GRID ARRAYS
For Standard .100” Spacing
Male Pin Header & Female Socket
Series 599, 514
• Series 599 SMT PGA headers and Series 514 SMT PGA sockets are
assembled with MM pin# 9976, and receptacle# 1434 respectively.
Each floats vertically within the insulator to compensate for uneven
solder paste on the PCB. Typical example illustrated.
1) “Floating” pin SMT Headers using
machined epoxy insulator.
2) Detail of “Floating” pins which
compensate for unevenly
screened solder paste.
3) PQFP device
4) Translator board
5) Existing motherboard
HEADER TYPE 9976
Ordering Information
SMT RECEPTACLE
TYPE 1434
FOR PGA MALE PIN HEADER
1. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the par t number will be located under the patter n.
Determined from footprint patter n pages 107 to 111
No. of pins Grid size Patter n #
Window
599 1 0 4 7 6
----
Series Plating
Code
SPECIFY PLATING CODE XX= 10
Pin Plating 10µ”Au
FOR PGA FEMALE SOCKET
1. Specify 2-digit plating code from char t at bottom of page.
2. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the par t number will be located under the patter n.
Determined from footprint patter n pages 107 to 111
No. of pins Grid size Patter n #
Window
5 1 4 0 3 4
----
Series Plating
Code
