https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Gateway between WirelessHART field devices and 802.11b/g Product Description WirelessHART gateway to 802.11b/g Ethernet Your advantages WirelessHART gateway supports 250 WirelessHART devices Completely meshed routing (self-organizing and self-healing network) with WirelessHART Easy programming and diagnostics using an integrated web server or HART programming device 802.11b/g client can be used as a WirelessHART backhaul connection with 802.11i (WPA2) 128-bit AES encryption WirelessHART uses "channel hopping" for interference tolerance Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356543569 Weight per Piece (excluding packing) 320.000 g Custom tariff number 85176200 Country of origin United States Technical data Dimensions Width 45 mm Height 99 mm 01/04/2021Page1/7 https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Technical data Dimensions Depth 114.5 mm Width 45 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -40 C ... 70 C Ambient temperature (storage/transport) -40 C ... 85 C Degree of protection IP20 Wireless path Interface description WLAN as per IEEE 802.11 b/g Direction Bi-directional Frequency range 2.4 GHz ... 2.472 GHz Transmit capacity, minimum 0 dBm Transmit capacity, maximum 20 dBm Channel distance 5 MHz Number of channel groups 13 Antenna connection method RSMA (female) Interface description WirelessHART Note Test loops connect HART programming tool Antenna External Antenna connection method RSMA (female) Frequency range 2.4 GHz ... 2.4835 GHz Transmit capacity, minimum 0 dBm Transmit capacity, maximum 10 dBm Channel distance 5 MHz Number of channel groups 15 Serial interface Connection method RJ45 Serial transmission speed 10/100 Mbps Supply Supply voltage 24 VDC Supply voltage range 9 VDC ... 30 VDC Typical current consumption 125 mA (at 24 V DC) Max. current consumption 300 mA (at 24 V DC) Nominal power consumption 5.1 W (typical) 01/04/2021Page2/7 https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Technical data General Mounting position any Assembly instructions NS 35 in acc. with EN 60715 Housing material Polyamide PA non-reinforced Connection data Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 4 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Connection method Screw connection Stripping length 8 mm Screw thread M3 Standards and Regulations Electromagnetic compatibility Conformance with RED Directive 2014/53/EU Interface description WLAN as per IEEE 802.11 b/g Channel distance 5 MHz Interface description WirelessHART Channel distance 5 MHz Conformance CE-compliant FCC Directive, Part 15.247 CE-compliant (RED Directive 2014/53/EU) ATEX 2014/34/EU ATEX Ex nA IIC T4 Gc; Sira 10ATEX4252X IECEx Ex nA IIC T4; IECEx CSA 10.0008X Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 01/04/2021Page3/7 https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Application drawing Block diagram +24 V 1 Power RESET RSSI Power A 3 B 4 RF B RF Link C ST 1 = Tx+ 2 = Tx- 3 = Rx+ 6 = Rx- 4, 5, 7, 8 = n.c. ST MESH MESH 10/100 LINK RESET ERR RSSI +24V GND Power A RF RF-Link HART ST MESH LINK ERR 2 A Ethernet ST MESH 10/100 +24V GND GND B RF Link Classifications eCl@ss eCl@ss 10.0.1 19179290 eCl@ss 4.0 27250300 eCl@ss 4.1 27250300 eCl@ss 5.0 27242200 eCl@ss 5.1 27242200 eCl@ss 6.0 19179200 eCl@ss 7.0 19179290 eCl@ss 8.0 19179290 eCl@ss 9.0 19179290 ETIM ETIM 2.0 EC000310 ETIM 3.0 EC000310 ETIM 4.0 EC000310 ETIM 5.0 EC000817 ETIM 6.0 EC000310 ETIM 7.0 EC000310 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 43223108 UNSPSC 11 39121008 UNSPSC 12.01 43223108 UNSPSC 13.2 43222604 UNSPSC 19.0 43222604 01/04/2021Page4/7 https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Accessories Accessories Antenna Antenna-RAD-ISM-2400-ANT-OMNI-6-0-2885919 Omnidirectional antenna, 2.4GHz, gain: 6dBi, polarization: linear, opening angle: h/v 360/30, degree of protection: IP67, seawater-resistant, connection: N (female), incl. mounting bracket and mast clamps, ATEX and IECEx approval Antenna-RAD-ISM-2400-ANT-VAN-3-0-RSMA-2701358 Omnidirectional antenna with protection against vandalism, 2.4GHz, gain: 3dBi, polarization: linear, opening angle: h/v 360/85, degree of protection: IP55, connection: RSMA (male), for control cabinet mounting (optional wall mounting), incl. 1.5m / 5ft. connecting cable Antenna-RAD-ISM-2400-ANT-OMNI-2-1-RSMA-2701362 Omnidirectional antenna, 2.4GHz, gain: 2dBi, polarization: linear, opening angle: h/v 360/75, degree of protection: IP65, connection: RSMA (male), incl. 1.5m / 5ft. connecting cable and mounting bracket for wall mounting Coaxial adapter Antenna barrier-BAR-ANT-N-N-EX-2702198 Antenna barrier for control cabinet feed-through, type of protection: Exi, degree of protection: IP65, barrier installation: Zone2 / 22, antenna installation: in dust and gas Ex area, frequency range: 0.3GHz...6GHz, connection: 2 x N (female), ATEX, EAC Ex and IECEx approval Coaxial cable 01/04/2021Page5/7 https://www.phoenixcontact.com/us/products/2900178 WirelessHART gateway-RAD-WHG/WLAN-XD-2900178 Accessories Antenna cable-RAD-PIG-RSMA/N-0.5-2903263 Antenna cable, outside diameter: 5mm (0.2in.), inner conductor: solid, attenuation: 0.4 / 0.5 / 0.6dB at 0.9 / 2.4 / 5.8GHz, connection: N (male) -> RSMA (male), cable length: 0.5m (1.6ft.) Antenna cable-RAD-PIG-RSMA/N-1-2903264 Antenna cable, outside diameter: 5mm (0.2in.), inner conductor: solid, attenuation: 0.5 / 0.8 / 1.1dB at 0.9 / 2.4 / 5.8GHz, connection: N (male) -> RSMA (male), cable length: 1m (3.3ft.) Antenna cable-RAD-CAB-EF393- 3M-2867649 Antenna cable, outside diameter: 10mm (0.4in.), inner conductor: stranded, attenuation: 1.0 / 1.8 / 3.1dB at 0.9 / 2.4 / 5.8GHz, connection: 2 x N (male), cable length: 3m (10ft.) Antenna cable-RAD-CAB-EF393- 5M-2867652 Antenna cable, outside diameter: 10mm (0.4in.), inner conductor: stranded, attenuation: 1.6 / 2.9 / 5.0dB at 0.9 / 2.4 / 5.8GHz, connection: 2 x N (male), cable length: 5m (16ft.) Surge protection for transceiver systems Surge protection device-CN-LAMBDA/4-5.9-BB-2838490 Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket 01/04/2021Page6/7 https://www.phoenixcontact.com/us/products/2900178 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/04/2021Page7/7