ABAC
MIL-DTL-38999 Series III
Belief in Technology
+44 (0) 1443 740331 www.ttabconectors.com sales@ttabconnectors.com
www.ttelectronics.com
© AB Connectors Ltd 08.11 AB Connectors
AB Connectors Limited Abercynon, Mountain Ash, Rhondda Cynon Ta , CF45 4SF
35
ABAC
Global Sales Offi ces
Email: sales@ttelectronics-na.com
North America
Email: sales@ttelectronicseurope.com
Europe
Email: sales@ttelectronicsasia.com
Asia
TT electronics Clive House, 12-18 Queens Road, Weybridge, Surrey, KT13 9XB, UK
www.ttelectronics.com Email: info@ttelectronics.com
2ABAC
Contents
03 Company Profi le
04 About TT Electronics
06 Technical Information
08 Part number explanations
09 Orientation
10 Insert Arrangements
11 Insert Arrangement Specifi cation
14 Receptacle Type 20 / Receptacle Type 24
15 Inline Receptacle Type 12 /
Box Mounting Receptacle Type 13
16 Wall Mounting Receptacle with pcb stand-off Type 14
17 Jam Nut Receptacle with pcb stand-off Type 15
18 Bulkhead Connector Type 11 /
Recommended Jam Nut Torque Values
19 Fixed Connector with PC Tails
20 MIL-DTL-38999 Plug Type 26 /
MIL-DTL-38999 Integral Backshell Type 37
21 Mated Connector Dimensions / Panel Cut out Information
22 Straight backshell for band termination & heat shrink
boot
23 Right angle backshell for band termination & heat shrink
boot
24 Straight Screen Trap Adapter
25 90º Angled Screen Trap Adapter
26 Fixed Protective Caps
27 Free Protective Caps
28 Stowage Receptacle / Screened Gaskets
29 Contacts
30 Insertion & Extraction
31 Contact Insertaion
32 Contact Extraction
33 Safety Information
34 TT Electronics and the Environment
35 Global Sales Offi ces
Global Sales Offices
North America
Email: sales@ttelectronics-na.com
TT electronics Clive House 12-18 Queens Road Weybridge, Surrey KT13 9XB, UK
www.ttelectronics.com Email: info@ttelectronics.com
Asia
Email: sales@ttelectronicsasia.com
Europe
Email: sales@ttelectronicseurope.com
3
ABAC
There are TT electronics products in every single military vehicle
deployed in confl ict zones across the globe.
TT electronics plc is an international electronics company that has been supplying innovative high reliability components to the
military and defence markets for more than 30 years. The knowledge and experience gained in that time has been brought together
in a global team of designers and applications engineers dedicated to supporting the unique requirements of modern military
applications.Our industry experience and agile approach to business has given us a pre-eminent position in the supply of connectors
and other components to land-based military vehicles.
As a major plc listed on the London stock exchange, TT electronics plc has the fi nancial resources to continually invest in
up-to-the-minute manufacturing facilities to address our customer’s needs and provide them with the correct solution.
With design and manufacturing plants in Europe and the USA, we are able to fulfi l the Urgent Operational Requirements (UORs) of
defence forces globally with industrial and mil spec compliant connectorsand assemblies at exceptionally short notice.
In the harsh and unforgiving environment of the modern battlefi eld, it is essential that every single component is fi t for purpose.
Working closely on site with our OEM and ODM customers has given our engineering team a deep understanding of the changing
market trends and requirements of land based military vehicles, enabling them to engineer the best possible component solution.
Company Profi le
4ABAC
TT electronics plc is a global electronics company. Within its electronic
components group are multiple facilities for design and manufacture of
interconnection systems with engineering teams providing custom solutions.
Electrical systems in the modern military vehicle
need to provide the user with a ruggedised
reliable solution to the interconnection issues
encountered in a battlefi eld theatre environment.
With high reliability being taken as a given we are
in the position to off er solutions to brave the most
demanding of applications.
About TT electronics plc
Tracked vehicle
Armoured personnel
carriers
Land Rover
Unmanned vehicles
Security services
Military land based vehicles
Vibration and salt spray are just two of the hazards
facing military aircraft. We have developed a range
of screening products that allow the termination of
multiple screens in just such environments without
degradation to interconnection systems. Design and
manufacture of complex cable harnesses form part
of our core strengths. We are actively involved with
all systems within helicopter operations including
UOR activities system upgrades and role fi ts.
Military helicoptors
Search and Rescue
Commercial
helicoptors
Rotary wing aircraft
5
ABAC
The requirement for electrical protection on military
platforms becomes even more critical as both the
natural eff ects of lightning and the eff ect of warfare
can play havoc with electrical systems in the air and
on the ground.
We provide cost eff ective electrical interface
systems designed to withstand the eff ects of EMC,
EMI, EMP and HIRF along with the harshest of
environmental conditions.
Jet fi ghters
Propeller technology
Reconnaissance
Mission control suites
Military fi xed wing aircraft
As the need grows for smaller systems we design
lighter, more compact interconnection systems
featuring miniaturisation of connector products
and lightweight wiring solutions. Screening
remains a high priority and a full range of connector
accessories for all styles of connector form part of
our portfolio to ensure design is not compromised
in any way
Defensive aids suites
Test equipment
solutions
Radar equipment
interconnects
Missile and defensive suites
The civil aircraft market demands reliable
manufacturing processes. We produce critical
systems designed to ensure our solutions are in line
with those requirements. Cost effi cient, light-weight
reliable solutions are an integral part of any design
specifi cation.
We have a market leading technology in composite
systems, enabling your designers to enhance your
product off ering to your customer.
Landing gear
Flight guidance
systems
Engine management
Civil aircraft
The issues facing naval applications bring a
whole new set of problems to the design of
interconnection systems. We off er screened cable
and conduit systems approved for “above deck full
threat EMP protection”. The ability to manufacture
interconnection panels and a component product
range off ering salt spray protection, ensures
environmental issues are catered for during the
design process
Radar systems
Submarine
communications
Panel assemblies
Naval systems
6ABAC
Note: The company reserves the right and may change or vary speci cation without prior written notice.
ABAC
technical information
Materials
Shell: Aluminium
Insulator: Rigid plastic / silicone rubber
Contacts: Copper alloy
Standard Plating Finishes
Aluminium parts: Cadmium Olive drab (W)
Electroless Nickel (F)
Nickel Flurocarbon Polymer (T)
Zinc cobalt green passivate (Q)
Black Zinc cobalt (QB)
Contacts: Gold over nickel plated
* Consult factory for alternative fi nishes.
Environmental Ratings
Temperature range: -65˚C to + 175˚C
Shock: 300g, 3 ms according EN 2591-D2 method A
Vibration: Sine: 10 to 2000 Hz, 3x12 hrs (60g, 140-2000 Hz) with temperature
cycling
Random: 50 to 2000 Hz , 2x8 hrs (1g² / Hz, 100-2000Hz) at Tº max.
25 to 2000 Hz , 2x8 hrs (5g² / Hz, 100-300Hz) (at ambient Tº)
Test with accessories in acc. with EN 2591-D3
Sealing: Mated connectors meet altitude immersion requirements of MIL-DTL-38999
Salt spray: 500 hrs
Resistance to fl uids: Gasoline: JP5 (OTAN F44)
Mineral hydraulic fl uid: MIL-H-5606 (OTAN H515)
Synthetic hydraulic fl uid: Skydrol 500 B4
Mineral lubricating: MIL-L-7870A (OTAN 0142)
Synthetic lubricating: MIL-L-23699 (OTAN 0156), MIL-L7808
Cleaning fl uid: MIL-DTL-25769 diluted
De-icing fl uid: MIL-A-8243
Extinguishing fl uid: Chlorobrométhane
Cooling fl uid: Coolanol
Mechanical Features
Coupling: 3 start stub acme thread
Contact termination: Crimp
Sealing: Dynamic sealing ring & individual wire seal grommet. IP67 rated.
Endurance: 500 mating / unmating operations
7
ABAC
ABAC
technical information
Test Voltage Rating (Vrms)
Test Voltage, ac rms, 60 Hz
Altitude Service rating M Service rating N Service rating I Service rating II
mated unmated mated unmated mated unmated mated unmated
Sea Level 1300 1300 1000 1000 1800 1800 2300 2300
50,000 ft. 800 550 600 400 1000 600 1000 800
70,000 ft. 800 350 600 260 1000 400 1000 500
100,000 ft. 800 200 600 200 1000 200 1000 200
Insulation Resistance
≥ 5 000 MΩ (at 500 Vdc) - at ambient
Cts Size 22 20 16 12 Power
Contact Rating (A) 5 7,5 13 23 45
Shell continuity: 2.5 mΩ
Shielding: 90 db at 100 MHz - 50 db at 10 GHz
Max. Current Rating
≥ 5 000 MΩ (at 500 Vdc)
Product Range: AB AC 20 W 11 35 P N XX
Shell style: 16 : Square flange receptacle with clinch nuts
20 : Square flange receptacle
24 : Jam nut receptacle
26 : Plug with RFI shielding
12 : Inline cable receptacle
13 : Box Mounting receptacle
14 : Square flange receptacle with PCB stand off
15 : Jam nut receptacle with PCB stand off
37 : Cable Plug with RFI and integral backshell
Plating:
W : Olive drab cadmium -65C to 175C
F : Electroless Nickel -65C to 200C
T : Nickel Flurocarbon Polymer -65C to 175C
Q : Zinc cobalt green passivate -65C to 175C
QB : Black Zinc cobalt -65C to 175C
Shell size: 9, 11, 13, 15, 17, 19, 21, 23 or 25
Contact layout: See pages 10, 11 & 12
Contact type: P : Pin A : Pin insert without contacts
S : Socket B: Socket insert without contacts
Orientation: N, A, B, C, D & E (See page 9)
Modification: Please consult factory
Basic Series: D38999 20 W B 35 P N
Shell style: 20 : Square flange receptacle
24 : Jam nut receptacle
26 : Plug with RFI shielding
Plating: W : Olive drab cadmium -65C to 175C
Shell size: A - B - C - D - E - F - G - H - J
Contact layout: See pages 10, 11 & 12
Contact type: P : Pin A : Pin insert without contacts
S : Socket B: Socket insert without contacts
Orientation: N, A, B, C, D & E (See page 9)
AB Part Number Explanation
ABAC
part number explanations
MIL-DTL-38999 Part Number Explanation
9
ABAC
Product Range: AB AC 20 W 11 35 P N XX
Shell style: 16 : Square flange receptacle with clinch nuts
20 : Square flange receptacle
24 : Jam nut receptacle
26 : Plug with RFI shielding
12 : Inline cable receptacle
13 : Box Mounting receptacle
14 : Square flange receptacle with PCB stand off
15 : Jam nut receptacle with PCB stand off
37 : Cable Plug with RFI and integral backshell
Plating:
W : Olive drab cadmium -65C to 175C
F : Electroless Nickel -65C to 200C
T : Nickel Flurocarbon Polymer -65C to 175C
Q : Zinc cobalt green passivate -65C to 175C
QB : Black Zinc cobalt -65C to 175C
Shell size: 9, 11, 13, 15, 17, 19, 21, 23 or 25
Contact layout: See pages 10, 11 & 12
Contact type: P : Pin A : Pin insert without contacts
S : Socket B: Socket insert without contacts
Orientation: N, A, B, C, D & E (See page 9)
Modification: Please consult factory
ABAC
part number explanations
Shell
Size
MS Shell
Size Angles N A B C D E
9 A
Aº 105 102 80 35 64 91
Bº 140 132 118 140 155 131
Cº 215 248 230 205 234 197
Dº 265 320 312 275 304 240
11 B
Aº 95 113 90 53 119 51
Bº 141 156 145 156 146 141
Cº 208 182 195 220 176 184
Dº 236 292 252 255 298 242
13 C
Aº 95 113 90 53 119 51
Bº 141 156 145 156 146 141
Cº 208 182 195 220 176 184
Dº 236 292 252 255 298 242
15 D
Aº 95 113 90 53 119 51
Bº 141 156 145 156 146 41
Cº 208 182 195 220 176 184
Dº 236 292 252 255 298 242
17 E
Aº 80 135 49 66 62 79
Bº 142 170 169 140 145 153
Cº 196 200 200 200 180 197
Dº 293 310 244 257 280 272
19 F
Aº 80 135 49 66 62 79
Bº 142 170 169 140 145 153
Cº 196 200 200 200 180 197
Dº 293 310 244 257 280 272
21 G
Aº 80 135 49 66 62 79
Bº 142 170 169 140 145 153
Cº 196 200 200 200 180 197
Dº 293 310 244 257 280 272
23 H
Aº 80 135 49 66 62 79
Bº 142 170 169 140 145 153
Cº 196 200 200 200 180 197
Dº 293 310 244 257 280 272
25 J
Aº 80 135 49 66 62 79
Bº 142 170 169 140 145 153
Cº 196 200 200 200 180 197
Dº 293 310 244 257 280 272
A
B
C
D
A
B
C
D
Viewed from face of receptacle Viewed from front of plug
ABAC
orientation
10 ABAC
D
A
C
B
E
12
3
4
5
6
7
8
9
10 11
13 12
A
B
C
D
EF
A
B
C
D
E
F
G
A
D
C
B
A
B
C
D
E
F
G
H
1
14
15
21
22
A
B
H
GK
F
C
J
E
D
A
B
C
E
D
A
B
C
D
E
F
G
H
J
K
L
M
N
R
P
A
B
C
D
E
F
G
H
J
K
L
MN
RS
TUP
A
M
LNPC
KU VRD
TS
JE
HF
1
21
31
A
B
C
D
E
K
J
H
L
M
G
F
1105
Service I
5 Contacts,
Size 20
1135
Service I
13 Contacts,
Size 22D
1198
Service I
6 Contacts,
Size 20
1199
Service I
7 Contacts,
Size 20
1304
Service M
4 Contacts,
Size 16
1308
Service I
8 Contacts,
Size 20
1335
Service M
22 Contacts,
Size 22D
1398
Service I
10 Contacts,
Size 20
1505
Service I
5 Contacts,
Size 16
1515
Service I
14 Contacts,
Size 20
1 Contacts,
Size 16
1518
Service I
18 Contacts,
Size 20
1519
Service I
19 Contact,
Size 20
1535
Service M
37 Contacts,
Size 22D
1597
Service I
8 Contact,
Size 20
4 Contacts,
Size 16
Shell Size 11
Shell Size 13
Shell Size 15
Shell Size 9
51
6
4
3
2
0935
Service M
6 Contacts,
Size 22D
ABAC
insert arrangements
Size 22D Contact
Size 20 Contact
Size 16 Contact
Size 12 Contact
Twinax Contact, Size 8
A
C
B
0998
Service l
3 Contacts,
Size 20
Note: Consult factory for other insert arrangements
11
ABAC
1706
Service I
6 Contacts,
Size 12
1708
Service II
8 Contacts,
Size 16
1726
Service I
26 Contacts,
Size 20
1799
Service I
2 Contacts,
Size 16
21 Contacts,
Size 20
1735
Service M
55 Contacts,
Size 22D
Shell Size 17
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
K
L
M
N
P
R
S
d
e
g
f
i
h
c
b
a
Y
Z
X
W
UV
J
T
1
3
64
66
4
9
58
63
10
16
51
57
17
24
43
50
25
33
34
42
JA
E
HB
K
L
F
GC
D
1
11
21
W
V
A
U
S
T
R
P
N
ML
e
f
g
h
i
j
X
k
m
n
t
r
s
q
B
C
D
E
F
G
H
J
K
d
c
La
Z
Y
p
b
A
B
D
C
A
B
C
D
E
F
HG
J
K
L
N
P
U
V
T
W
M
R
S
X
1
7
94
100
15
24
34
35
45
56
66
55
46
8
93
86
16
85
77
25
76
67
U
n
AA
GG
FF
w
f
K
A
W
q
CC
DD
u
d
J
T
m
z
y
x
g
L
B
X
r
s
t
c
H
R
P
N
D
E
F
S
l
k
j
h
M
C
Y
Z
a
b
G
V
p
BB
HH
EE
v
e
1911
Service I
11 Contacts,
Size 16
1932
Service M
32 Contacts,
Size 20
1935
Service M
66 Contacts,
Size 22D
2111
Service I
11 Contacts,
Size 12
2175
Service M
4 Twinax Contacts
2135
Service M
79 Contacts,
Size 22D
2141
Service I
41 Contacts,
Size 20
2321
Service II
21 Contacts,
Size 16
2335
Service M
100 Contacts,
Size 22D
2355
Service I
55 Contacts,
Size 20
Shell Size 19
Shell Size 23
1928
Service l
2 Contacts, Size 16
26 Contacts,
Size 20
2332
Service I
32 Contacts,
Size 20
A
B
C
D
E
F
G
H
K
L
M
N
P
R
S
c
d
e
b
a
J
Y
X
W
T
V
U
Z
A
B
C
D
E
G
H
J
M
N
a
b
Z
Y
F
U
T
S
K
R
P
L
V
W
X
h c
d
e
f
gj
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
Y
S
Z
W
XV
U
T
1
3
9
16
24 31
39
45
52
55
53
46
40
32
25
17
10
4
AB
C
D
E
F
G
H
J
K
L
M
N
R
ST
U
P
V
W
X
Y
Z
ab
c
A
B
H
C
E
F
G
D
A
B
D
E
F
C
Shell Size 21
A
B
C
D
E
F
G
H
J
K
L
M
RP
SN
2116
Service II
16 Contacts,
Size 16
Note: Consult factory for other insert arrangements
12 ABAC
R
S
Z
P
Y
N4
7
3
M
J
X
LK
A
5
W
B
C
TD
U
1
62E
F
V
G
N
J
A
E
H
B
K
L
M
N
P
U
V
R
Y
Z
aT
S
W
V
F
G
C
D
W
Vtu
s
U
r
T
q
S
n
R
p
Pm
N
Mh
A
B
C
D
E
X
Y
Z
a
b
F
c
dG
H
ek
J
f
g
L K
AA v
y x
AA
2520
Service N
10 Contacts, Size 20
13 Contacts, Size 16
4 Coax Contacts,
Size 12
3 Twinax Contacts,
Size 8
2535
Service M
128 Contacts,
Size 22D
2546
Service I
40 Contacts, Size 20
4 Contacts, Size 16
2 Coax Contacts,
Size 8
Shell Size 25
2524
Service I
12 Contacts,
Size 12
12 Contacts,
Size 16
Shell Size 25
ABAC
insert arrangements
continued...
Note: Consult factory for other insert arrangements
13
ABAC
Shell Size MS Shell Size
Contact
Arrangement
No. of
Contacts
Size
22D
Size
20
Size
16
Size
12
Size 8
Twinax
9 A 09-35 6 6
09-98 3 3
11 B
11-05 5 5
11-35 13 13
11-98 6 6
11-99 7 7
13 C
13-04 4 4
13-08 8 8
13-35 22 22
13-98 10 10
15 D
15-05 5 5
15-15 15 14 1
15-18 18 18
15-19 19 19
15-35 37 37
15-97 12 8 4
17 E
17-06 6 6
17-08 8 8
17-26 26 26
17-35 55 55
17-99 23 21 2
19 F
19-11 11 11
19-28 28 26 2
19-32 32 32
19-35 66 66
21 G
21-11 11 11
21-16 16 16
21-35 79 79
21-41 41 41
21-75 4 4
23 H
23-21 21 21
23-32 32 32
23-35 100 100
23-55 55 55
25 I
25-20 30 10 13 4 (coax) 3
25-24 24 12 12
25-35 128 128
25-46 46 40 4 2
ABAC
insert arrangement specifi cation
14 ABAC
ABAC
MIL-DTL-38999 receptacle type 20
Shell
Size A max. B max. C max. D thread
E
± 0.30 F G
H
± 0.20
J
± 0.20 K max.
09 20.90 10.60 2.50 M12 x 1-6g 23.80 18.26 15.09 3.25 5.49 5.94
11 20.90 10.60 2.50 M15 x 1-6g 26.20 20.62 18.26 3.25 4.93 5.94
13 20.90 10.60 2.50 M18 x 1-6g 28.60 23.01 20.62 3.25 4.93 5.94
15 20.90 10.60 2.50 M22 x 1-6g 31.00 24.61 23.01 3.25 4.93 5.94
17 20.90 10.60 2.50 M25 x 1-6g 33.30 26.97 24.61 3.25 4.93 5.94
19 20.90 10.60 2.50 M28 x 1-6g 36.50 29.36 26.97 3.25 4.93 5.94
21 20.10 11.40 3.20 M31 x 1-6g 39.70 31.75 29.36 3.25 4.93 5.18
23 20.10 11.40 3.20 M34 x 1-6g 42.90 34.93 31.75 3.91 6.15 5.18
25 20.10 11.40 3.20 M37 x 1-6g 46.00 38.10 34.93 3.91 6.15 5.18
A B
C
G
F
E
J
H
D
K
Panel
Thickness
ABAC
MIL-DTL-38999 receptacle type 24
22.60 MAX
C
B
F
Ø D
A A/F
E A/F
G
Shell Size A + 0.10
- 0.15 B max. C max. D Ø max. E max. F
± 0.40 G thread
09 16.53 9.90 3.20 30.50 23.00 27.00 M12 x 1-6g
11 19.07 9.90 3.20 35.20 26.00 31.80 M15 x 1-6g
13 23.82 9.90 3.20 38.40 31.00 34.90 M18 x 1-6g
15 26.97 9.90 3.20 41.60 34.00 38.10 M22 x 1-6g
17 30.15 9.90 3.20 44.80 37.00 41.30 M25 x 1-6g
19 33.32 9.90 3.50 49.50 41.00 46.00 M28 x 1-6g
21 36.50 9.90 3.50 52.70 46.00 49.20 M31 x 1-6g
23 39.67 9.90 3.50 55.90 47.00 52.40 M34 x 1-6g
25 42.85 9.90 3.50 59.00 52.00 55.60 M37 x 1-6g
15
ABAC
ABAC
in line receptacle type 12
EXAMPLE PART NUMBER: ABAC 12 W 17 35 S N
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
*CONSULT FACTORY FOR CUSTOM REQUIREMENTS
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR
2
HOLE DIAMETERS
0.05
ALL DECIMAL PLACES
0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
ISSUED BY DATE
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
ISSUE
38999 IN LINE RECEPTACLE
N/A
ABAC.CDS.0006
RW
31/01/2011
For Reference Only
ABAC.CDS.0006
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
A MAX
ØB MAX
TABLE 1: CONNECTOR DIMENSIONS
SHELL SIZE A MAX ØB MAX THREAD DETAIL
9 33 21 M12x1-6g
11 33 23.7 M15x1-6g
13 33 29.3 M18x1-6g
15 33 31.3 M22x1-6g
17 33 35.67 M25x1-6g
19 33 38.4 M28x1-6g
21 33 41.67 M31x1-6g
23 33 44.9 M34x1-6g
25 33 47.97 M37x1-6g
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: RAW
RN: N/A
DATE: 31/01/2011
PRE PRODUCTION
PROPOSAL
(9.00)
THREAD DETAIL
Shell Size A Max ØD Max Thread Detail
9 33 21 M12x1-6g
11 33 23.7 M15x1-6g
13 33 29.3 M18x1-6g
15 33 31.3 M22x1-6g
17 33 35.67 M25x1-6g
19 33 38.4 M28x1-6g
21 33 41.67 M31x1-6g
23 33 44.9 M34x1-6g
25 33 47.97 M37x1-6g
EXAMPLE PART NUMBER: ABAC 13 W 17 35 S N
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
*CONSULT FACTORY FOR CUSTOM REQUIREMENTS
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
ISSUED BY DATE
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
ISSUE
BOX MOUNTING RECEPTACLE
N/A
ABAC.CDS.0007
AG
02/02/2011
PL
ABAC.CDS.0007
AG 02/02/2011 A
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
TABLE 1: CONNECTOR DIMENSIONS
SHELL SIZE A1 A2 D MAX E F ØG MAX H MAX B MAX C1 ±0.20 C2 ±0.20
9 18.26 15.09 33.00 28.59 - 28.79 26.29 - 26.49 12.71 6.50 24.00 5.49 3.25
11 20.62 18.26 33.00 28.59 - 28.79 26.29 - 26.49 15.48 6.50 26.40 4.93 3.25
13 23.01 20.62 33.00 28.59 - 28.79 26.29 - 26.49 18.65 6.50 28.80 4.93 3.25
15 24.61 23.01 33.00 28.59 - 28.79 26.29 - 26.49 22.61 6.50 31.20 4.93 3.25
17 26.97 24.61 33.00 28.59 - 28.79 26.29 - 26.49 25.41 6.50 33.50 4.93 3.25
19 29.36 26.97 33.00 28.59 - 28.79 26.29 - 26.49 28.58 6.50 36.70 4.93 3.25
21 31.75 29.36 33.00 29.29 - 29.49 26.29 - 26.49 31.76 6.50 39.90 4.93 3.25
23 34.93 31.75 33.00 29.29 - 29.49 26.29 - 26.49 34.53 6.50 43.10 6.15 3.91
25 38.10 34.93 33.00 29.29 - 29.49 26.29 - 26.49 37.29 6.50 46.20 6.15 3.91
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 02/02/2011
B MAX TYP
A1 TYP
A2 TYP F
E
H MAX
C1 TYP C2 TYP
D MAX
ØG MAX
ABAC
box mounting receptacle type 13
Shell
Size A1 A2 D Max E F
ØG
Max H Max B Max C1 ±0.20 C2 ±0.20
9 18.26 15.09 33.00 28.59 - 28.79 26.29 - 26.49 12.71 6.50 24.00 5.49 3.25
11 20.62 18.26 33.00 28.59 - 28.79 26.29 - 26.49 15.48 6.50 26.40 4.93 3.25
13 23.01 20.62 33.00 28.59 - 28.79 26.29 - 26.49 18.65 6.50 28.80 4.93 3.25
15 24.61 23.01 33.00 28.59 - 28.79 26.29 - 26.49 22.61 6.50 31.20 4.93 3.25
17 26.97 24.61 33.00 28.59 - 28.79 26.29 - 26.49 25.41 6.50 33.50 4.93 3.25
19 29.36 26.97 33.00 28.59 - 28.79 26.29 - 26.49 28.58 6.50 36.70 4.93 3.25
21 31.75 29.36 33.00 29.29 - 29.49 26.29 - 26.49 31.76 6.50 39.90 4.93 3.25
23 34.93 31.75 33.00 29.29 - 29.49 26.29 - 26.49 34.53 6.50 43.10 6.15 3.91
25 38.10 34.93 33.00 29.29 - 29.49 26.29 - 26.49 37.29 6.50 46.20 6.15 3.91
image here
16 ABAC
ABAC
wall mounting receptacle with pcb stand-off type 14 (sizes 9 & 11)
Shell
Size A1 A2
B
Max C1 C2 D E
F
Min
F
Max H ØJ ØK ØL
9 18.26 15.09 24.1 5.29 - 5.69 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 20.62 18.26 26.5 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
EXAMPLE PART NUMBER: ABAC 14 W 17 35 S N M09
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE (TABLE 3)
NOTES:
1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS,
CONSULT FACTORY FOR CUSTOM REQUIREMENTS.
2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS.
3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS.
4. CONNECTOR CAN BE REAR PANEL MOUNTED ONLY. REFER TO
CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS.
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANG E
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
WALL MOUNTING RECEPTACLE
WITH INTEGRAL PCB STAND OFF
N/A
ABAC.CDS.0008..
AG
03/04/2011
PL
ABAC.CDS.0008..
AG 03/04/2011 A
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 26/03/2011
A2 TYP
A1 TYP
B MAX
C1 TYP
C2 TYP
D E
ØJ
ØK
ØL
H
M3 X 0.5 - 6H
3 PLACES
120°120°
PANEL
PCB
F MAX
(NOTE 1)
F MIN
(NOTE 1)
ØG (NOTE 2)
TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11)
SHELL SIZE A1 A2 B MAX C1 C2 D E F MIN F MAX H ØJØKØL
9 18.26 15.09 24.1 5.29 - 5.69 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 20.62 18.26 26.5 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25)
SHELL SIZE A1 A2 B MAX C1 C2 D E F MIN F MAX H ØJØKØL
13 23.01 20.62 28.9 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 24.61 23.01 31.3 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 26.97 24.61 33.6 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 29.39 26.97 36.8 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 31.75 29.39 40 4.73 - 5.13 3.05 - 3.45 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 34.93 31.75 43.2 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 38.1 34.93 46.3 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
A2 TYP
A1 TYP
B MAX
C1 TYP
C2 TYP
D E
F MAX
(NOTE 1)
F MIN
(NOTE 1)
ØG (NOTE 2)
PCB
PANEL
45°
90°
ØJ
ØK
ØL
H
M3 X 0.5 - 6H
4 PLACES TABLE 3: PCB CONTACTS
CONTACT SIZE MOD CODE REF. ØG M
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
M
ØG
ABAC
wall mounting receptacle with pcb stand-off type 14 (sizes 13 - 25)
Shell
Size A1 A2
B
Max C1 C2 D E
F
Min
F
Max H ØJ ØK ØL
13 23.01 20.62 28.9 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 24.61 23.01 31.3 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 26.97 24.61 33.6 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 29.39 26.97 36.8 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 31.75 29.39 40 4.73 - 5.13 3.05 - 3.45 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 34.93 31.75 43.2 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 38.1 34.93 46.3 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
EXAMPLE PART NUMBER: ABAC 14 W 17 35 S N M09
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE (TABLE 3)
NOTES:
1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS,
CONSULT FACTORY FOR CUSTOM REQUIREMENTS.
2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS.
3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS.
4. CONNECTOR CAN BE REAR PANEL MOUNTED ONLY. REFER TO
CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS.
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANG E
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
WALL MOUNTING RECEPTACLE
WITH INTEGRAL PCB STAND OFF
N/A
ABAC.CDS.0008..
AG
03/04/2011
PL
ABAC.CDS.0008..
AG 03/04/2011 A
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 26/03/2011
A2 TYP
A1 TYP
B MAX
C1 TYP
C2 TYP
D E
ØJ
ØK
ØL
H
M3 X 0.5 - 6H
3 PLACES
120°120°
PANEL
PCB
F MAX
(NOTE 1)
F MIN
(NOTE 1)
ØG (NOTE 2)
TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11)
SHELL SIZE A1 A2 B MAX C1 C2 D E F MIN F MAX H ØJØKØL
9 18.26 15.09 24.1 5.29 - 5.69 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 20.62 18.26 26.5 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25)
SHELL SIZE A1 A2 B MAX C1 C2 D E F MIN F MAX H ØJØKØL
13 23.01 20.62 28.9 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 24.61 23.01 31.3 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 26.97 24.61 33.6 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 29.39 26.97 36.8 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 31.75 29.39 40 4.73 - 5.13 3.05 - 3.45 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 34.93 31.75 43.2 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 38.1 34.93 46.3 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
A2 TYP
A1 TYP
B MAX
C1 TYP
C2 TYP
D E
F MAX
(NOTE 1)
F MIN
(NOTE 1)
ØG (NOTE 2)
PCB
PANEL
45°
90°
ØJ
ØK
ØL
H
M3 X 0.5 - 6H
4 PLACES TABLE 3: PCB CONTACTS
CONTACT SIZE MOD CODE REF. ØG M
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
M
ØG
17
ABAC
Shell
Size A1 A2
B
Max C1 C2 D E
F
Min
F
Max H ØJ ØK ØL
9 18.26 15.09 24.1 5.29 - 5.69 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 20.62 18.26 26.5 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
ABAC
jam nut mounting receptacle with pcb stand-off type 15 (sizes 9 & 11)
EXAMPLE PART NUMBER: ABAC 15 W 17 35 S N M09
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE (TABLE 3)
NOTES:
1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS, CONSULT
FACTORY FOR CUSTOM REQUIREMENTS.
2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS.
3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS.
4. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS.
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANG E
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
JAM NUT MOUNTING RECEPTACLE
WITH INTEGRAL PCB STAND OFF
N/A
ABAC.CDS.0009.
AG
03/04/2011
PL
ABAC.CDS.0009.
AG 18/04/2011 B
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 26/03/2011
B MAX CD
ØH
ØJ
ØK
G
M3 X 0.5 - 6H
3 PLACES
TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11)
SHELL SIZE ØA MAX B MAX C D E MIN E MAX G ØHØJØK
9 30.50 27.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 35.20 32.20 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25)
SHELL SIZE ØA MAX B MAX C D E MIN E MAX G ØHØJØK
13 38.40 35.30 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 41.60 38.50 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 44.80 41.70 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 49.50 46.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 52.70 49.60 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 55.90 52.80 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 59.00 56.00 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
B MAX C
45°
90°
ØH
ØJ
ØK
G
M3 X 0.5 - 6H
4 PLACES
TABLE 3: PCB CONTACTS
CONTACT SIZE MOD CODE REF. ØF L
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
L
ØF
E MAX
(NOTE 1)
E MIN
(NOTE 1)
PCB
PANEL
ØF (NOTE 2)
120°120°
ØA MAX
ØA MAX
D
E MAX
(NOTE 1)
E MIN
(NOTE 1)
PANEL
PCB
ØF (NOTE 2)
ISSUE: B
BY: AG
RN: N/A
DATE: 18/04/2011
UPDATED DESCRIPTION TO
JAM NUT MOUNT
Shell
Size ØA Max B Max C D E Min E Max G ØH ØJ ØK
9 30.50 27.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 35.20 32.20 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
Shell
Size A1 A2
B
Max C1 C2 D E
F
Min
F
Max H ØJ ØK ØL
13 23.01 20.62 28.9 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 24.61 23.01 31.3 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 26.97 24.61 33.6 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 29.39 26.97 36.8 4.73 - 5.13 3.05 - 3.45 20.80 - 20.90 13.90 - 14.00 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 31.75 29.39 40 4.73 - 5.13 3.05 - 3.45 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 34.93 31.75 43.2 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 38.1 34.93 46.3 5.95 - 6.35 3.71 - 4.11 20.00 - 20.10 14.70 - 14.80 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
ABAC
jam nut mounting receptacle with pcb stand-off type 15 (sizes 13 - 25)
EXAMPLE PART NUMBER: ABAC 15 W 17 35 S N M09
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE (TABLE 3)
NOTES:
1. DIMENSION COVERS RANGE OF TYPICAL CATALOGUE ITEMS, CONSULT
FACTORY FOR CUSTOM REQUIREMENTS.
2. REFER TO TABLE 3 FOR STOCKED CONTACT TAIL DIMENSIONS.
3. CONSULT FACTORY FOR CUSTOM PCB INTERFACE REQUIREMENTS.
4. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS.
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANG E
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
JAM NUT MOUNTING RECEPTACLE
WITH INTEGRAL PCB STAND OFF
N/A
ABAC.CDS.0009.
AG
03/04/2011
PL
ABAC.CDS.0009.
AG 18/04/2011 B
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 26/03/2011
B MAX CD
ØH
ØJ
ØK
G
M3 X 0.5 - 6H
3 PLACES
TABLE 1A: CONNECTOR DIMENSIONS (SIZE 9 & 11)
SHELL SIZE ØA MAX B MAX C D E MIN E MAX G ØHØJØK
9 30.50 27.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 14.3 19.70 - 19.80 8.8
11 35.20 32.20 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 18.1 23.50 - 23.60 12.6
TABLE 1B: CONNECTOR DIMENSIONS (SIZE 13 TO 25)
SHELL SIZE ØA MAX B MAX C D E MIN E MAX G ØHØJØK
13 38.40 35.30 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 41.60 38.50 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 44.80 41.70 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 49.50 46.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 52.70 49.60 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 55.90 52.80 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 59.00 56.00 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.52
B MAX C
45°
90°
ØH
ØJ
ØK
G
M3 X 0.5 - 6H
4 PLACES
TABLE 3: PCB CONTACTS
CONTACT SIZE MOD CODE REF. ØF L
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
L
ØF
E MAX
(NOTE 1)
E MIN
(NOTE 1)
PCB
PANEL
ØF (NOTE 2)
120°120°
ØA MAX
ØA MAX
D
E MAX
(NOTE 1)
E MIN
(NOTE 1)
PANEL
PCB
ØF (NOTE 2)
ISSUE: B
BY: AG
RN: N/A
DATE: 18/04/2011
UPDATED DESCRIPTION TO
JAM NUT MOUNT
Shell
Size ØA Max B Max C D E Min E Max G ØH ØJ ØK
13 38.40 35.30 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 20.46 25.86 - 25.96 14.96
15 41.60 38.50 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 23.52 28.92 - 29.02 18.02
17 44.80 41.70 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 26.81 32.20 - 32.30 21.3
19 49.50 46.40 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 29.36 34.76 - 34.86 23.86
21 52.70 49.60 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 32.67 38.07 - 38.17 27.17
23 55.90 52.80 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 36.05 41.45 - 41.55 30.55
25 59.00 56.00 22.50 - 22.60 12.20 - 12.30 2.41 7.86 7.36 - 7.46 39.02 44.42 - 44.52 33.5
ABAC
bulkhead connector type 11
Shell Size A max B max C max D Thread E (A/F) F max
9 25.50 42.10 6.40 M17 x 1.0 24.00 27.40
11 25.50 42.10 6.40 M20 x 1.0 27.00 32.20
13 25.50 42.10 6.40 M25 x 1.0 32.00 35.30
15 25.50 42.10 6.40 M28 x 1.0 36.00 38.50
17 25.50 42.10 6.40 M32 x 1.0 37.00 41.70
19 25.50 42.10 6.40 M35 x 1.0 41.00 46.40
21 25.50 42.10 6.40 M38 x 1.0 46.00 49.60
23 25.50 42.10 6.40 M41 x 1.0 50.00 52.80
25 25.50 42.10 6.40 M44 x 1.0 51.00 56.00
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM. DOES THE CUSTOMER NEED TO BE INFORMED OF ANY CHANGE?
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE.
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
PED 021
SEE PED 021
FINISH
SEE
CODE
FINISH:
VARN
PROJECTION
Issue
PED 021
SEE
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
BULKHEAD CONNECTOR
DATASHEET
N/A
ABAC.CDS.0004
AG
14/12/2009
PL
ABAC.CDS.0004
AG 11/01/2010 A
SHEET 1 OF 1
DRAWING
RELEASED IN DM
A MAX
B MAX
C MAX
D THREAD
E (A/F)
F MAX
TABLE 1: CONNECTOR DIMENSIONS
SHELL SIZE A MAX B MAX C MAX D THREAD E (A/F) F MAX
9 25.50 42.10 6.40 M17 X 1.0 24.00 27.40
11 25.50 42.10 6.40 M20 X 1.0 27.00 32.20
13 25.50 42.10 6.40 M25 X 1.0 32.00 35.30
15 25.50 42.10 6.40 M28 X 1.0 36.00 38.50
17 25.50 42.10 6.40 M32 X 1.0 37.00 41.70
19 25.50 42.10 6.40 M35 X 1.0 41.00 46.40
21 25.50 42.10 6.40 M38 X 1.0 46.00 49.60
23 25.50 42.10 6.40 M41 X 1.0 50.00 52.80
25 25.50 42.10 6.40 M44 X 1.0 51.00 56.00
EXAMPLE PART NUMBER: ABAC 11 W 15 35 P N
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
P = PIN ON JAM NUT SIDE
S = SOCKET ON JAM NUT SIDE
PP = PIN TO PIN
SS = SOCKET TO SOCKET
ORIENTATION
1. CONSULT FACTORY FOR AVAILABILITY
2. SYMETRICAL LAYOUTS ONLY, CONSULT FACTORY
1
2
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
1
21
3.70
ISSUE: A
BY: AG
RN: N/A
DATE: 11/01/2010
MIL-DTL-38999
recommended jam nut torque values
Shell Size Inch-pounds
9 30/36
11 40/46
13 55/60
15 70/75
17 80/85
19 90/95
21 100/110
23 110/120
25 120/130
19
ABAC
ABAC
fi xed connector with pc tails
EXAMPLE PART NUMBER: ABAC 24 W 15 35 P N M12
PRODUCT SERIES
SHELL STYLE
FINISH
SHELL SIZE
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE
M12 = REAR OF CONNECTOR RESIN FILLED FOR PANEL
SEALING APPLICATIONS. CONTACTS SUPPLIED PER M09
(SHORT TAIL VERSION), REFER TO CONTACTS TABLE FOR
TAIL DIMENSIONS.
NOTES:
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
3. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL
CUT-OUT DETAILS.
4. MINIMUM SEALING CAPABILITY 10E atm.cm /s (He).
5. MAXIMUM SERVICE TEMPERATURE 150°C.
-7 3
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
ISSUED BY DATE
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
ISSUE
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
FIXED CONNECTOR WITH PC TAILS
AND PANEL SEALING
N/A
ABAC.CDS.0011
AG
18/04/2011
PL
ABAC.CDS.0011
AG B
21/04/2011
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M09 0.70 4.00
20 M09 0.70 5.10
16 M09 1.15 5.10
RESIN FILLED
RESIN FILLED
ISSUE: A
BY: AG
RN: N/A
DATE: 19/04/2011
ISSUE: B
BY: AG
RN: N/A
DATE: 19/04/2011
Type 24 Jam Nut Style
Shell Size C Min C Max
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
Type 20 Square Flange Style
Shell Size C Min C Max
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
EXAMPLE PART NUMBER: ABAC 24 W 15 35 P N M12
PRODUCT SERIES
SHELL STYLE
FINISH
SHELL SIZE
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
MOD CODE
M12 = REAR OF CONNECTOR RESIN FILLED FOR PANEL
SEALING APPLICATIONS. CONTACTS SUPPLIED PER M09
(SHORT TAIL VERSION), REFER TO CONTACTS TABLE FOR
TAIL DIMENSIONS.
NOTES:
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
3. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL
CUT-OUT DETAILS.
4. MINIMUM SEALING CAPABILITY 10E atm.cm /s (He).
5. MAXIMUM SERVICE TEMPERATURE 150°C.
-7 3
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
ISSUED BY DATE
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
FINISH
CODE
FINISH:
VARN
PROJECTION
ISSUE
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
FIXED CONNECTOR WITH PC TAILS
AND PANEL SEALING
N/A
ABAC.CDS.0011
AG
18/04/2011
PL
ABAC.CDS.0011
AG B
21/04/2011
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M09 0.70 4.00
20 M09 0.70 5.10
16 M09 1.15 5.10
RESIN FILLED
RESIN FILLED
ISSUE: A
BY: AG
RN: N/A
DATE: 19/04/2011
ISSUE: B
BY: AG
RN: N/A
DATE: 19/04/2011
Contacts
Contact Size Mod Code Ref. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
20 ABAC
ABAC
plug with integral backshell type 37
EXAMPLE PART NUMBER: ABAC 37 W 17 35 S N
PRODUCT SERIES
SHELL STYLE
FINISH (TABLE 2)
SHELL SIZE (TABLE 1)
INSERT ARRANGEMENT
CONTACT TYPE
P = PIN CONTACTS
S = SOCKET CONTACTS
ORIENTATION
*CONSULT FACTORY FOR CUSTOM REQUIREMENTS
������������������
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
ISSUED BY DATE
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
ISSUE
OVERMOULD VERSION OF 38999 PLUG
WITH RFI SHIELDING
N/A
ABAC.CDS.0005
AG
25/02/2010
PL
ABAC.CDS.0005
AG 08/02/2011 C
= CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
ØC MAX
TABLE 1: CONNECTOR DIMENSIONS
SHELL SIZE A MAX B MAX ØC MAX ØD MAX
9 18.50 43.35 21.00 12.00
11 18.50 43.35 23.70 15.05
13 18.50 43.35 29.30 18.05
15 18.50 43.35 31.30 22.05
17 18.50 43.35 35.67 25.05
19 18.50 43.35 38.40 28.05
21 18.50 43.35 41.67 31.05
23 18.50 43.35 44.90 34.05
25 18.50 43.35 47.97 37.05
TABLE 2: FINISH
REF FINISH DESCRIPTION
QB ZINC COBALT BLACK PASSIVATE
W OLIVE DRAB CADMIUM
QZINC COBALT GREEN PASSIVATE
F ELECTROLESS NICKEL
ISSUE: A
BY: AG
RN: N/A
DATE: 02/06/2010
ØD MAX
ISSUE: B
BY: AG
CN: N/A
DATE: 26/01/2011
B MAX LENGTH CHANGED
WAS 47.05
B MAX
A MAX
ISSUE: C
BY: AG
CN: N/A
DATE: 08/02/2011
Shell Size A Max B Max ØC Max ØD Max
918.50 43.35 21.00 12.00
11 18.50 43.35 23.70 15.05
13 18.50 43.35 29.30 18.05
15 18.50 43.35 31.30 22.05
17 18.50 43.35 35.67 25.05
19 18.50 43.35 38.40 28.05
21 18.50 43.35 41.67 31.05
23 18.50 43.35 44.90 34.05
25 18.50 43.35 47.97 37.05
ABAC
MIL-DTL-38999 plug type 26
Shell Size A Max B Thread C Max
09 31.00 M12 x 1-6g 21.80
11 31.00 M15 x 1-6g 25.00
13 31.00 M18 x 1-6g 29.40
15 31.00 M22 x 1-6g 32.50
17 31.00 M25 x 1-6g 35.70
19 31.00 M28 x 1-6g 38.50
21 31.00 M31 x 1-6g 41.70
23 31.00 M34 x 1-6g 44.90
25 31.00 M37 x 1-6g 48.00
21
ABAC
MIL-DTL-38999
panel cut-out information
Shell Size N
-0.25
R1
Rear
Mount
R2
Front
Mount
T Ø
+/- 0.13
V
min.
W min.
Rear
Mount
W1 min.
Front
Mount
X
min .
+ 0.25
Ø Y
09 16.74 -0.06 18.26 15.09 3.25 30.76 16.66 13.11 24.61 17.10
11 19.59 20.62 18.26 3.25 34.21 20.22 15.88 27.22 20.96
13 24.26 23.01 20.62 3.25 40.00 23.42 19.05 30.15 25.65
15 27.56 24.61 23.01 3.25 44.63 26.59 23.01 33.24 28.83
17 30.73 26.97 24.61 3.25 45.77 30.96 25.81 36.44 32.01
19 33.91 29.36 26.97 3.25 50.40 32.94 28.98 39.24 35.18
21 37.08 31.75 29.36 3.25 56.16 36.12 32.16 42.44 38.35
23 40.26 34.93 31.75 3.91 60.81 39.29 34.93 45.64 41.53
25 43.43 38.10 34.93 3.91 62.18 42.47 37.69 48.48 44.70
R1
R2
R1
R2
Ø T
W
W1 (1)
X
N
V
Ø Y
MIL-DTL-38999
mated connector dimensions
Shell Size A max B max C max D Max
09 37.00 52.30 38.30 53.60
11 37.00 52.30 38.30 53.60
13 37.00 52.30 38.50 53.80
15 37.00 52.30 38.50 53.80
17 37.00 52.30 38.50 53.80
19 37.00 52.30 38.50 53.80
21 36.00 51.30 38.50 53.80
23 36.00 51.30 38.50 53.80
25 36.00 51.30 38.50 53.80
Cable
Entry Size
A Ø
min.
B Ø
max.
C Ø
max.
03 4.77 9.75 13.70
04 6.35 9.75 13.70
05 7.92 10.72 15.30
06 9.52 12.32 17.00
07 11.10 13.90 18.50
08 12.70 15.50 20.10
09 14.27 17.07 21.70
10 15.88 18.68 23.30
11 17.47 20.27 24.90
12 19.05 21.85 26.50
13 20.62 23.42 28.10
14 22.23 25.03 29.70
15 23.82 26.62 31.30
16 25.40 28.20 32.90
17 27.00 29.80 34.50
18 28.60 31.40 36.10
19 30.20 33.00 37.70
20 31.80 34.60 39.30
21 33.38 36.18 40.90
22 35.00 37.80 42.50
23 36.58 39.38 44.10
ABAC
straight backshell for band termination & heat shrink boot
Style: ABAC 01
A-A ( 3 : 1 )
Assembly number Item 1 (Accessory nut) Item 2 (O'Ring) Item 3 (Circlip) Item 4 (Straight adaptor)
ABAC.01.##.#.09 514.2.18740.#.00 M0400093 05.08.272.000.CH 514.2.18731.#.##
ABAC.01.##.#.11 514.2.18741.#.00 M0400094 05.10.272.000.CH 514.2.18732.#.##
ABAC.01.##.#.13 514.2.18742.#.00 M0400095 SB.MSE.92.0.CH 514.2.18733.#.##
ABAC.01.##.#.15 514.2.18743.#.00 121B.18.CRASR.AC 05.14.272.000.CH 514.2.18734.#.##
ABAC.01.##.#.17 514.2.18744.#.00 M0400096 SB.MSE.92.2.CH 514.2.18735.#.##
ABAC.01.##.#.19 514.2.18745.#.00 M0400097 SB.MSE.92.3.CH 514.2.18736.#.##
ABAC.01.##.#.21 514.2.18746.#.00 M0400098 121B.18.IC.CH 514.2.18737.#.##
ABAC.01.##.#.23 514.2.18747.#.01 M0400099 121B.20.IC.CH 514.2.18738.#.##
ABAC.01.##.#.25 514.2.18748.#.00 M0400100 SB.MSE.92.6.CH 514.2.18739.#.##
Parts list
C a b le
E n try S iz e Ø A Ø B Ø C
0 3 4 .7 7 9 . 7 5 1 3 . 7 0
0 4 6 .3 5 9 . 7 5 1 3 . 7 0
0 5 7 .9 2 1 0 . 7 2 1 5 . 3 0
0 6 9 .5 2 1 2 . 3 2 1 7 . 0 0
0 7 1 1 .1 0 1 3 . 9 0 1 8 . 5 0
0 8 1 2 .7 0 1 5 . 5 0 2 0 . 1 0
0 9 1 4 .2 7 1 7 . 0 7 2 1 . 7 0
1 0 1 5 .8 8 1 8 . 6 8 2 3 . 3 0
1 1 1 7 .4 7 2 0 . 2 7 2 4 . 9 0
1 2 1 9 .0 5 2 1 . 8 5 2 6 . 5 0
1 3 2 0 .6 2 2 3 . 4 2 2 8 . 1 0
1 4 2 2 .2 3 2 5 . 0 3 2 9 . 7 0
1 5 2 3 .8 2 2 6 . 6 2 3 1 . 3 0
1 6 2 5 .4 0 2 8 . 2 0 3 2 . 9 0
1 7 2 7 .0 0 2 9 . 8 0 3 4 . 5 0
1 8 2 8 .6 0 3 1 . 4 0 3 6 . 1 0
1 9 3 0 .2 0 3 3 . 0 0 3 7 . 7 0
2 0 3 1 .8 0 3 4 . 6 0 3 9 . 3 0
2 1 3 3 .3 8 3 6 . 1 8 4 0 . 9 0
2 2 3 5 .0 0 3 7 . 8 0 4 2 . 5 0
2 3 3 6 .5 8 3 9 . 3 8 4 4 . 1 0
Ta b le 1
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM. DOES THE CUSTOMER NEED TO BE INFORMED OF ANY CHANGE?
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This d ocument and the information c ontained herein may not be co pied, used or disclosed, in whole
or in part, except with the prior written permission of AB CON NECTORS LTD., or if this docu ment has been produced
under a contract with another party as expressly authorised unde r that contract. It is suppli ed without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
PED 021
SEE PED 021
FINISH
SEE
CODE
FINISH:
VARN
PROJECTION
Issue
PED 021
SEE
∇ = CRITICAL CHARACTERISTIC = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
SCREEN & HSA STRAIGHT
ASSEMBLY VARIOUS SIZES
ABAC.01.##.#.##
MD
02/10/2008
PL
ABAC.01.##.#.##
MD 08/12/2008 5
SHEET 1 OF 1
Breakdown of part numbers, see note 5
Assembly: ABAC.01. ## . # . 15
Item 1: 514.2.1874#. # .00
Item 4: 514.2.1873#. # . ##
Cable entry size Plating code
Plating code
e.g. W, Q, QB or F.
Plating code
e.g. W, Q, QB or F.
Cable entry size
Notes:
1. Part number to be marked here
2. For cable entry size please refer to Table 1.
3. Plating code:
W = olive drab cadmium plate
Q = zinc cobalt olive drab passivate
QB = zinc cobalt black passivate
F = electroless nickel
4. With adhesive lined heat shrink boot fitted backshell
sealed to ip67.
5. Cable entry size and plating code to be the same on
every component in the relevant BOM
ØA
ØB
ØC
31.53 (REF)
25.40 (REF)
SEE NOTE 1
ISSUE: 3
BY: MD
RN: 6304
DATE: 02-10-2008
PLATING CODES CORRECTED
ITEM 4 CHANGED ALL SIZES
Accessory Size
Accessory Size
ISSUE: 4
BY: RW
CN: 46489
DATE: 27-11-2008
ISSUE: 5
BY: MD
CN: 46521
DATE: 08-12-2008
Table 1
Assembly: ABAC.01 . ## . # 15
Cable entry size
(see table 1)
Shell Size
Class / Finish
23
ABAC
Cable
Entry Size
A Ø
min.
B Ø
max.
C Ø
max.
03 4.77 9.75 13.70
04 6.35 9.75 13.70
05 7.92 10.72 15.30
06 9.52 12.32 17.00
07 11.10 13.90 18.50
08 12.70 15.50 20.10
09 14.27 17.07 21.70
10 15.88 18.68 23.30
11 17.47 20.27 24.90
12 19.05 21.85 26.50
13 20.62 23.42 28.10
14 22.23 25.03 29.70
15 23.82 26.62 31.30
16 25.40 28.20 32.90
17 27.00 29.80 34.50
18 28.60 31.40 36.10
19 30.20 33.00 37.70
20 31.80 34.60 39.30
21 33.38 36.18 40.90
22 35.00 37.80 42.50
23 36.58 39.38 44.10
24 38.10 40.90 45.70
ABAC
right angle backshell for band termination & heat shrink boot
Style: ABAC 03
Assembly: ABAC.03 . ## . # ##
Cable entry size
(see table 1)
Shell Size
Class / Finish
Table 1
SECTION A-A
Cable entry size ØA ØB ØC
03 4.77 9.75 13.70
04 6.35 9.75 13.70
05 7.92 10.72 15.30
06 9.52 12.32 17.00
07 11.10 13.90 18.50
08 12.70 15.50 20.10
09 14.27 17.07 21.70
10 15.88 18.68 23.30
11 17.47 20.27 24.90
12 19.05 21.85 26.50
13 20.62 23.42 28.10
14 22.23 25.03 29.70
15 23.82 26.62 31.30
16 25.40 28.20 32.90
17 27.00 29.80 34.50
18 28.60 31.40 36.10
19 30.20 33.00 37.70
20 31.80 34.60 39.30
21 33.38 36.18 40.90
22 35.00 37.80 42.50
23 36.58 39.38 44.10
24 38.10 40.90 45.70
Assembly number Item 1 (Accessory nut) Item 2 (90° ad aptor) Item 3 (O'Ring) Item 4 (Circlip)
ABAC.03.##.#.09 514.2.18740.#.00 514.2.18750.#.## M0400093 05.08.272.000.CH
ABAC.03.##.#.11 514.2.18741.#.00 514.2.18751.#.## M0400094 05.10.272.000.CH
ABAC.03.##.#.13 514.2.18742.#.00 514.2.18752.#.## M0400095 SB.MSE.92.0.CH
ABAC.03.##.#.15 514.2.18743.#.00 514.2.18753.#.## 121B.18.CRASR.AC 05.14.272.000.CH
ABAC.03.##.#.17 514.2.18744.#.00 514.2.18754.#.## M0400096 SB.MSE.92.2.CH
ABAC.03.##.#.19 514.2.18745.#.00 514.2.18755.#.## M0400097 SB.MSE.92.3.CH
ABAC.03.##.#.21 514.2.18746.#.00 514.2.18756.#.## M0400098 121B.18.IC.CH
ABAC.03.##.#.23 514.2.18747.#.01 514.2.18757.#.## M0400099 121B.20.IC.CH
ABAC.03.##.#.25 514.2.18748.#.00 514.2.18758.#.## M0400100 SB.MSE.92.6.CH
Parts list
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM. DOES THE CUSTOMER NEED TO BE INFORMED OF ANY CHANGE?
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SU RFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A2
TOLERANCES. NO TES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE
c ABConnectors Ltd. This doc ument and the infor mation contained herein may not be copied, used or disclo sed, in whole
or in part, except with the prior wr itten permission of AB CONNECTORS LTD., or if this doc ument has been produced
under a contract with another part y as expressly au thorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
PED 021
SEE PED 021
FINISH
SEE
CODE
FINISH:
VARN
PROJECTION
Issue
PED 021
SEE
∇ = CRITICAL CHARACTERISTIC = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
SCREEN & HSA 90°
ASSEMBLY VARIOUS SIZES
SEE COMPONENT DRAWINGS
ABAC.03.##.#.##
MD
02/10/2008
PL
ABAC.03.##.#.##
RW 25/11/2008 5
SHEET 1 OF 1
Breakdown of part numbers, see note 5
Assembly: ABAC.03. ## . # . ##
Item 1: 514.2.1874#. # .00
Item 2: 514.2.1875#. # . ##
Cable entry size Plating code
Plating code
e.g. - NJ, KP, KL...
Plating code
e.g. - NJ, KP, KL...
Cable entry size
Notes:
1. Part number to be marked here
2. For cable entry size please refer to table.
3. Plating code:
W = olive drab cadmium plate
Q = zinc cobalt olive drab passivate
QB = zinc cobalt black passivate
F = electroless nickel
4. With adhesive lined heat shrink boot fitted backshell
sealed to ip67.
5. Cable entry size and plating code to be the same on
every component in the relevant BOM
ISSUE: 3
BY: MD
RN: 6304
DATE: 02-10-2008
ITEM 2 ADDED
SERRATIONS DISK AND 90°
OUTLET SUB REMOVED.
PRESS FITTING NOTE REMOVED.
ØA
ØB
ØC
ISSUE: 4
BY: MD
CN: 46466
DATE: 05-11-2008
Accessory size
Accessory Size
Accessory Size
ISSUE: 5
BY: RAW
CN: 46489
DATE: 25-11-2008
A
A
ABAC
straight screen trap adapter
Style: ABAC 10
A-A ( 2 : 1 )
CABLE SIZE ASSY. NUMBER ITEM 1 QTY 1 ITEM 1A QTY 1 ITEM 2 QTY 1 ITEM 2A QTY 1 ITEM 3 QTY 1 ITEM 3A QTY 1 ITEM 4 QTY 1 ITEM 5 QTY 1 DIA. A MAX DIA. B
03
ABAC.10.03.#.21 514.2.18926.#.03 514.2.00706.4.03 514.2.18929.#.03 514.2.00719.4.03
04
ABAC.10.04.#.21 514.2.18926.#.04 514.2.00706.4.04 514.2.18929.#.04 514.2.00719.4.04
05
ABAC.10.05.#.21 514.2.18926.#.05 514.2.00706.4.05 514.2.18929.#.05 514.2.00719.4.05
06
ABAC.10.06.#.21 514.2.18926.#.06 514.2.00706.4.06 514.2.18929.#.06 514.2.00719.4.06
07
ABAC.10.07.#.21 514.2.18926.#.07 514.2.00706.4.07 514.2.18929.#.07 514.2.00719.4.07
08
ABAC.10.08.#.21 514.2.18926.#.08 514.2.00706.4.08 514.2.18929.#.08 514.2.00719.4.08
09
ABAC.10.09.#.21 514.2.18926.#.09 514.2.00706.4.09 514.2.18929.#.09 514.2.00719.4.09
10
ABAC.10.10.#.21 514.2.18926.#.10 514.2.00706.4.10 514.2.18929.#.10 514.2.00719.4.10
11
ABAC.10.11.#.21 514.2.18926.#.11 514.2.00706.4.11 514.2.18929.#.11 514.2.00719.4.11
12
ABAC.10.12.#.21 514.2.18926.#.12 514.2.00706.4.12 514.2.18929.#.12 514.2.00719.4.12
13
ABAC.10.13.#.21 514.2.18926.#.13 514.2.00706.4.13 514.2.18929.#.13 514.2.00719.4.13
14
ABAC.10.14.#.21 514.2.18746.#.00 514.2.00696.4.00 514.2.18926.#.14 514.2.00706.4.14 514.2.18929.#.14 514.2.00719.4.14 121B.18.IC.CH M0400098 38.90 M31 x 1 - 6H
15
ABAC.10.15.#.21 514.2.18926.#.15 514.2.00706.4.15 514.2.18929.#.15 514.2.00719.4.15
16
ABAC.10.16.#.21 514.2.18926.#.16 514.2.00706.4.16 514.2.18929.#.16 514.2.00719.4.16
17
ABAC.10.17.#.21 514.2.18926.#.17 514.2.00706.4.17 514.2.18929.#.17 514.2.00719.4.17
18
ABAC.10.18.#.21 514.2.18926.#.18 514.2.00706.4.18 514.2.18929.#.18 514.2.00719.4.18
19
ABAC.10.19.#.21 514.2.18926.#.19 514.2.00706.4.19 514.2.18929.#.19 514.2.00719.4.19
20
ABAC.10.20.#.21 514.2.18926.#.20 514.2.00706.4.20 514.2.18929.#.20 514.2.00719.4.20
21
ABAC.10.21.#.21 514.2.18926.#.21 514.2.00706.4.21 514.2.18929.#.21 514.2.00719.4.21
22
ABAC.10.22.#.21 514.2.18926.#.22 514.2.00706.4.22 514.2.18929.#.22 514.2.00719.4.22
23
ABAC.10.23.#.21 514.2.18926.#.23 514.2.00706.4.23 514.2.18929.#.23 514.2.00719.4.23
24
ABAC.10.24.#.21 514.2.18926.#.24 514.2.00706.4.24 514.2.18929.#.24 514.2.00719.4.24
DIA B DIA. C MIN LENGTH D MAX Oa MAX
4.70
6.30
7.90
9.50
11.10
12.70
14.20
15.80
17.40
19.00
20.60
M37 X 1 - 6H 22.20
23.80
25.40
27.00
28.60
30.20
31.80
33.30
35.00
36.50
38.10
28.58
33.88
22.00
27.30
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR
2
HOLE DIAMETERS
0.05
ALL DECIMAL PLACES
0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM. DOES THE CUSTOMER NEED TO BE INFORMED OF ANY CHANGE?
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE.
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
PED 021
SEE PED 021
FINISH
SEE
CODE
FINISH:
VARN
PROJECTION
Issue
PED 021
SEE
∇
= CRITICAL CHARACTERISTIC = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
SIZE 21 - PATTERN 38999
ASSY. OF STRAIGHT LOW PROFILE
ADAPTOR AND SCREEN TRAP NUT
ABAC.10.##.#.21
AJ
18/03/2011
PL
ABAC.10.##.#.21
RW
21/03/2011
1
FOR VARIOUS CABLE ENTRY SIZES SHEET 1 OF 1
BREAKDOWN OF PART NUMBERS
ABAC.10.##.#.21
ACCESSORY STYLE
PLATING CODE
(SEE NOTE 2)
CONNECTOR SIZE
DIA.B
DIA.CMIN
LENGTH D MAX
DIA. A MAX
Oa MAX
CABLE ENTRY
SIZE
NOTES:-
1. PART NUMBER TO BE MARKED HERE.
2. ITEM 1,ITEM 2 AND ITEM 3 ARE TO BE USED FOR
PLATING CODE:-
W= OLIVE DRAB CADMIUM PLATE
Q= ZINC COBALT OLIVE DRAB PASSIVATE
QB= ZINC COBALT BLACK PASSIVATE
ITEM 1A, ITEM 2A AND ITEM 3A ARE TO BE USED FOR
PLATING CODE:-
F= ELECTROLESS NICKEL
ISSUE: 2
BY: AJ
RN:6634
DATE:18-03-2011
RELEASED TO
PRODUCTION
A
A
Cable Size ØC
Length D
Max Oa max
03 4.70
28.58 22.00
04 6.30
05 7.90
06 9.50
07 11.10
08 12.70
33.88 27.30
09 14.20
10 15.80
11 17.40
12 19.00
13 20.60
14 22.20
15 23.80
16 25.40
17 27.00
18 28.60
19 30.20
20 31.80
21 33.30
22 35.00
23 36.50
24 38.10
ABAC . 10 . ## . # 21
Accessory Style
Cable Entry Size
Connector Size
Class / Finish
ABAC . 07 . ## . # 21
Accessory Style
Cable Entry Size
Connector Size
Class / Finish
25
ABAC
ABAC
straight screen trap adapter
Style: ABAC 10
ABAC
900 angled screen trap adapter
Style: ABAC 07
A-A ( 2 : 1 )
DIA . C MIN LENGTH D MA X LENGTH E MA X Oa MA X
14.6297.2307.4
14.6297.2303.6
91.7275.3309.7
48.8222.5305.9
83.0367.6301.11
89.1363.8307.21
65.3349.9302.41
71.5355.1408.51
67.6341.3404.71
53.8337.4400.91
49.9323.6406.02
45.1429.7402.22
41.3425.9408.32
83.4467.0504.52
81.5465.1500.72
47.5421.2506.82
19.5492.2502.03
65.6449.2508.13
63.7447.3503.33
61.8445.4500.53
69.8443.5505.63
03.0586.6501.83
38.25
43.55
CABLE SIZE ASSY . NUMBER ITEM 1 QTY 1 ITEM 1A QTY 1 ITEM 2 QTY 1 ITEM 2A QTY 1 ITEM 3 QTY 1 ITEM 3A QTY 1 ITEM 4 QTY 1 ITEM 5 QTY 1 DIA . A MAX DIA. B
03
ABA C.07.03.#.21 514.2.00736.#.03 514.2.00726.4.03 514.2.18929.#.03 514.2.00719.4.03
04
ABA C.07.04.#.21 514.2.00736.#.04 514.2.00726.4.04 514.2.18929.#.04 514.2.00719.4.04
05
ABA C.07.05.#.21 514.2.00736.#.05 514.2.00726.4.05 514.2.18929.#.05 514.2.00719.4.05
06
ABA C.07.06.#.21 514.2.00736.#.06 514.2.00726.4.06 514.2.18929.#.06 514.2.00719.4.06
07
ABA C.07.07.#.21 514.2.00736.#.07 514.2.00726.4.07 514.2.18929.#.07 514.2.00719.4.07
08
ABA C.07.08.#.21 514.2.00736.#.08 514.2.00726.4.08 514.2.18929.#.08 514.2.00719.4.08
09
ABA C.07.09.#.21 514.2.00736.#.09 514.2.00726.4.09 514.2.18929.#.09 514.2.00719.4.09
10
ABA C.07.10.#.21 514.2.00736.#.10 514.2.00726.4.10 514.2.18929.#.10 514.2.00719.4.10
11
ABA C.07.11.#.21 514.2.00736.#.11 514.2.00726.4.11 514.2.18929.#.11 514.2.00719.4.11
12
ABA C.07.12.#.21 514.2.00736.#.12 514.2.00726.4.12 514.2.18929.#.12 514.2.00719.4.12
13
ABA C.07.13.#.21 514.2.18746.#.00 514.2.00696.4.00 514.2.00736.#.13 514.2.00726.4.13 514.2.18929.#.13 514.2.00719.4.13 121B.18.IC.CH M0400098 38.90 M31 x 1 - 6H
14
ABA C.07.14.#.21 514.2.00736.#.14 514.2.00726.4.14 514.2.18929.#.14 514.2.00719.4.14
15
ABA C.07.15.#.21 514.2.00736.#.15 514.2.00726.4.15 514.2.18929.#.15 514.2.00719.4.15
16
ABA C.07.16.#.21 514.2.00736.#.16 514.2.00726.4.16 514.2.18929.#.16 514.2.00719.4.16
17
ABA C.07.17.#.21 514.2.00736.#.17 514.2.00726.4.17 514.2.18929.#.17 514.2.00719.4.17
18
ABA C.07.18.#.21 514.2.00736.#.18 514.2.00726.4.18 514.2.18929.#.18 514.2.00719.4.18
19
ABA C.07.19.#.21 514.2.00736.#.19 514.2.00726.4.19 514.2.18929.#.19 514.2.00719.4.19
20
ABA C.07.20.#.21 514.2.00736.#.20 514.2.00726.4.20 514.2.18929.#.20 514.2.00719.4.20
21
ABA C.07.21.#.21 514.2.00736.#.21 514.2.00726.4.21 514.2.18929.#.21 514.2.00719.4.21
22
ABA C.07.22.#.21 514.2.00736.#.22 514.2.00726.4.22 514.2.18929.#.22 514.2.00719.4.22
23
ABA C.07.23.#.21 514.2.00736.#.23 514.2.00726.4.23 514.2.18929.#.23 514.2.00719.4.23
24
ABA C.07.24.#.21 514.2.00736.#.24 514.2.00726.4.24 514.2.18929.#.24 514.2.00719.4.24
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR
2
HOLE DIAMETERS
0.05
ALL DECIMAL PLACES
0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM. DOES THE CUSTOMER NEED TO BE INFORMED OF ANY CHANGE?
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF LAST CHANGE.
c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole
or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing
PED 021
SEE PED 021
FINISH
SEE
CODE
FINISH:
VARN
PROJECTION
Issue
PED 021
SEE
∇
= CRITICAL CHARACTERISTIC = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
SIZE 21 - PATTERN 38999
ASSY OF 90° ANGLE OUTLET
SCREEN ADAPTOR AND SCREEN TRAP
ABAC.07.##.#.21
AJ
17/03/2011
PL
ABAC.07.##.#.21
RW
17/03/2011
2
NUT FOR VARIOUS ENTRY SIZES SHEET 1 OF 1
DIA. A. MAX
DIA.B
DIA. C MIN
Oa MAX
LENGTH D MAX
LENGTHEMAX
BREAKDOWN OF PART NUMBERS
ABAC.07.##.#.21
ACCESSORY STYLE CONNECTOR SIZE
CABLE ENTRY PLATING CODE
SIZE (SEE NOTE 2)
NOTES.
1. PART NUMBER TO BE MARKED HERE .
2. ITEM 1,ITEM 2 AND ITEM 3 ARE TO BE USED FOR
PLATING CODE:-
W= OLIVE DRAB CADMIUM PLATE
Q= ZINC COBALT OLIVE DRAB PASSIVATE
QB= ZINC COBALT BLACK PASSIVATE
ITEM 1A, ITEM 2A AND ITEM 3A ARE TO BE USED FOR
PLATED CODE:-
F= ELECTROLESS NICKEL
RELEASED TO
PRODUCTION
ISSUE: 2
BY: AJ
RN: 6633
DATE: 17-03-2011
A
A
Cable Size ØC
Length D
Max
Length E
Max Oa max
03 4.70 32.79
38.35
26.41
04 6.30 32.79 26.41
05 7.90 33.57 27.19
06 9.50 35.22 28.84
07 11.10 36.76 30.38
08 12.70 38.36
43.55
31.98
09 14.20 39.94 33.56
10 15.80 41.55 35.17
11 17.40 43.14 36.76
12 19.00 44.73 38.35
13 20.60 46.32 39.94
14 22.20 47.92 41.54
15 23.80 49.52 43.14
16 25.40 50.76 44.38
17 27.00 51.56 45.18
18 28.60 52.12 45.74
19 30.20 52.29 45.91
20 31.80 52.94 46.56
21 33.30 53.74 47.36
22 35.00 54.54 48.16
23 36.50 55.34 48.96
24 38.10 56.68 50.30
ABAC . 07 . ## . # 21
Accessory Style
Cable Entry Size
Connector Size
Class / Finish
Shell
Size
AB
Part No. A Ø min. B Ø max.
L + 12.7
- 6.35
38999
Part No.
09 ABAC / 33 # 09 R 3.90 22.86 127 D38999 / 33 # 09 R
11 ABAC / 33 # 11 R 3.90 27.96 127 D38999 / 33 # 11 R
13 ABAC / 33 # 13 R 3.90 30.48 127 D38999 / 33 # 13 R
15 ABAC / 3 3 # 15 R 3.90 31.75 127 D38999 / 33 # 15 R
17 ABAC / 33 # 17 R 3.90 36.83 127 D38999 / 33 # 17 R
19 ABAC / 33 # 19 R 3.90 38.10 127 D38999 / 33 # 19 R
21 ABAC / 33 # 21 R 3.90 41.91 127 D38999 / 33 # 21 R
23 ABAC / 33 # 23 R 3.90 44.45 127 D38999 / 33 # 23 R
25 ABAC / 33 # 25 R 3.90 48.26 127 D38999 / 33 # 25 R
Shell
Size
AB
Part No. C Ø min. B Ø max.
L + 12.7
- 6.35
38999
Part No.
09 ABAC / 33 # 09 N 17.64 22.86 127 D38999 / 33 # 09 N
11 ABAC / 33 # 11 N 21.97 27.96 127 D38999 / 33 # 11 N
13 ABAC / 33 # 13 N 25.12 30.48 127 D38999 / 33 # 13 N
15 ABAC / 33 # 15 N 29.92 31.75 127 D38999 / 33 # 15 N
17 ABAC / 33 # 17 N 32.00 36.83 127 D38999 / 33 # 17 N
19 ABAC / 33 # 19 N 36.27 38.10 127 D38999 / 33 # 19 N
21 ABAC / 33 # 21 N 38.25 41.91 127 D38999 / 33 # 21 N
23 ABAC / 33 # 23 N 42.62 44.45 127 D38999 / 33 # 23 N
25 ABAC / 33 # 25 N 44.45 48.26 127 D38999 / 33 # 25 N
ABAC
fixed protective caps
Style: ABAC 33-*-**-R Part Number: D38999 33-*-**-R
Note: replace # with desired plating finish.
Note: replace # with desired plating finish.
ABAC
fixed protective caps
Style: ABAC 33-*-**-N Part Number: D38999 33-*-**-N
27
ABAC
Shell
Size
AB
Part No. A Ø min. B Ø max.
L + 12.7
- 6.35
38999
Part No.
09 ABAC / 32 # 09 R 3.90 22.86 127 D38999 / 32 # 09 R
11 ABAC / 32 # 11 R 3.90 27.96 127 D38999 / 32 # 11 R
13 ABAC / 32 # 13 R 3.90 30.48 127 D38999 / 32 # 13 R
15 ABAC / 32 # 15 R 3.90 31.75 127 D38999 / 32 # 15 R
17 ABAC / 32 # 17 R 3.90 36.83 127 D38999 / 32 # 17 R
19 ABAC / 32 # 19 R 3.90 38.10 127 D38999 / 32 # 19 R
21 ABAC / 32 # 21 R 3.90 41.91 127 D38999 / 32 # 21 R
23 ABAC / 32 # 23 R 3.90 44.45 127 D38999 / 32 # 23 R
25 ABAC / 32 # 25 R 3.90 48.26 127 D38999 / 32 # 25 R
Shell
Size
AB
Part No. C Ø min. B Ø max.
L + 12,7
- 6,35
38999
Part No.
09 ABAC / 32 # 09 N 17,64 22,86 127 D38999 / 32 # 09 N
11 ABAC / 32 # 11 N 21,97 27,96 127 D38999 / 32 # 11 N
13 ABAC / 32 # 13 N 25,12 30,48 127 D38999 / 32 # 13 N
15 ABAC / 32 # 15 N 29,92 31,75 127 D38999 / 32 # 15 N
17 ABAC / 32 # 17 N 32,00 36,83 127 D38999 / 32 # 17 N
19 ABAC / 32 # 19 N 36,27 38,10 127 D38999 / 32 # 19 N
21 ABAC / 32 # 21 N 38,25 41,91 127 D38999 / 32 # 21 N
23 ABAC / 32 # 23 N 42,62 44,45 127 D38999 / 32 # 23 N
25 ABAC / 32 # 25 N 44,45 48,26 127 D38999 / 32 # 25 N
ABAC
free protective caps
Style: ABAC 32-*-**-R/N Part Number: D38999 32-*-**-R/N
Note: replace # with desired plating finish.
Note: replace # with desired plating finish.
ABAC
free protective caps
Style: ABAC 32-*-**-N Part Number: D38999 32-*-**-N
Shell Size A max. C
+/- 0.3
E
+/- max. 0.3 FAB
Part No.
09 24.2 23.8 2.5 5.94 ABAC 22 09 #
11 24.2 26.2 2.5 5.94 ABAC 22 11 #
13 24.2 28.6 2.5 5.94 ABAC 22 13 #
15 24.2 31.0 2.5 5.94 ABAC 22 15 #
17 24.2 33.3 2.5 5.94 ABAC 22 17 #
19 24.2 36.5 2.5 5.94 ABAC 22 19 #
21 24.1 39.7 3.2 5.18 ABAC 22 21 #
23 24.1 42.90 3.2 5.18 ABAC 22 23 #
25 24.1 46.0 3.2 5.18 ABAC 22 25 #
ABAC
stowage receptacle
Style: ABAC 22-**-* Part Number: D38999 22-*-*
Note: replace # with desired plating finish.
ABAC
screened gaskets
Shell
Size
AB
Part No. A max. B CRS C Ø D Ø min.
09 508/2/38401/109 24.33 18.26 3.12 14.22
11 508/2/38401/111 26.70 20.62 3.12 17.02
13 508/2/38401/113 29.08 23.01 3.12 21.08
15 508/2/38401/115 31.47 24.61 3.12 24.38
17 508/2/38401/117 33.83 26.97 3.12 27.43
19 508/2/38401/119 37.03 29.36 3.12 30.73
21 508/2/38401/121 40.18 31.75 3.12 33.78
23 508/2/38401/123 43.38 34.93 3.61 37.08
25 508/2/38401/125 46.53 38.10 3.61 40.13
29
ABAC
A
øB
1
23
A
øB
1
23
ABAC
contacts
socket
SIZE SOCKET PIN Finished Wire Outside
Dimensions
Contact Barrel Wiring Size
AWG
MIL-DTL
part no. AB Part no. MIL-DTL
part no. AB Part no. Min.
inches
Min.
mm
Max.
inches
Max.
mm
22D 22D 28, 26, 24, 22 M 39029/58-348 523/4/18241/000 M 39029/58-360 523/4/18219/000 0.030 0.076 0.054 1.370
20 20 24, 22, 20 M 39029/56-351 523/4/18242/000 M 39029/58-363 523/4/18225/000 0.040 1.020 0.083 2.110
16 16 20, 18, 16 M 39029/58-352 523/4/18243/000 M 39029/58-364 523/4/18227/000 0.650 1.650 0.109 2.770
12 12 14, 12 M 39029/56-353 523/4/18244/000 M 39029/58-365 523/4/18229/000 0.097 2.460 1.420 3.610
12 coax M 39029/75-416 M 39029/28-24
12 coax M 39029/103-559 M 39029/102-558
8 twinax M 39029/91-530 M 39029/90-529 0.124 3.150 0.155 3.940
8 coax M 39029/59-366 M 39029/60-367
8 power consult factory 523/4/18327/000 523/4/18326/000 0.124 3.150 0.155 3.940
AB Connectors
General Note
AB Connectors reserves the right to make changes in product specification without notice or liability.
All information is subject to AB Connectors’ own data and is considered accurate at time of going to print.
© AB Connectors Limited, Abercynon, Mountain Ash, Rhondda Cynon Taff CF45 4SF, UK.
Telephone: +44 (0) 1443 740331 • Facsimile: +44 (0) 01443 741676 • Email: sales@ttabconnectors.com • Website: www.ttabconnectors.com Issue 01 01.11
Cylindrical 38999 Series III
Connectors with PC tail
Note: To choose correct tail length and diameter, see Table 1
For additional information or to discuss your specific requirements please contact our Sales Team using the contact details below.
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is sup pliedwi thout liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
Receptacle connectors with preloaded straight PCB contacts
A subsidiary of
TT electronics plc
Note: For dimensions A & B, see Table 1. All dimensions are in millimetres
Product Range: AB AC 20 W 11 35 P N M09
Shell style: 20 : Square flange receptacle
24 : Jam nut receptacle
26 : Plug with RFI shielding
Plating:
W : Olive drab cadmium
F : Electroless Nickel
Q : Zinc cobalt green passivate
QB : Zinc cobalt black passivate
Shell size: 9, 11, 13, 15, 17, 19, 21, 23 or 25
Contact layout: Please consult factory
Contact type: P : Pin
S : Socket
Orientation: N, A, B, C, D & E
Modification: See Table 1 Below
Size 22D pin contact with PCB tail 514.2.18970.###
Size 22D socket contact with PCB tail 514.2.18977.###
Size 20 pin contact with PCB tail 514.2.18971.###
Size 20 socket contact with PCB tail 514.2.18978.###
Size 16 pin contact with PCB tail 514.2.18972.###
Size 16 socket contact with PCB tail 514.2.18979.###
AB Part Number Explanation
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is sup pliedwi thout liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
Table 1
Straight PCB contacts for 38999 Series III connector
Pin Contact Socket Contact
Contact part numbers
ØA
B
B
ØA
ØA
B
B
ØA
AB Connectors
General Note
AB Connectors reserves the right to make changes in product specification without notice or liability.
All information is subject to AB Connectors’ own data and is considered accurate at time of going to print.
© AB Connectors Limited, Abercynon, Mountain Ash, Rhondda Cynon Taff CF45 4SF, UK.
Telephone: +44 (0) 1443 740331 • Facsimile: +44 (0) 01443 741676 • Email: sales@ttabconnectors.com • Website: www.ttabconnectors.com Issue 01 01.11
Cylindrical 38999 Series III
Connectors with PC tail
Note: To choose correct tail length and diameter, see Table 1
For additional information or to discuss your specific requirements please contact our Sales Team using the contact details below.
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is sup pliedwi thout liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
Receptacle connectors with preloaded straight PCB contacts
A subsidiary of
TT electronics plc
Note: For dimensions A & B, see Table 1. All dimensions are in millimetres
Product Range: AB AC 20 W 11 35 P N M09
Shell style: 20 : Square flange receptacle
24 : Jam nut receptacle
26 : Plug with RFI shielding
Plating:
W : Olive drab cadmium
F : Electroless Nickel
Q : Zinc cobalt green passivate
QB : Zinc cobalt black passivate
Shell size: 9, 11, 13, 15, 17, 19, 21, 23 or 25
Contact layout: Please consult factory
Contact type: P : Pin
S : Socket
Orientation: N, A, B, C, D & E
Modification: See Table 1 Below
Size 22D pin contact with PCB tail 514.2.18970.###
Size 22D socket contact with PCB tail 514.2.18977.###
Size 20 pin contact with PCB tail 514.2.18971.###
Size 20 socket contact with PCB tail 514.2.18978.###
Size 16 pin contact with PCB tail 514.2.18972.###
Size 16 socket contact with PCB tail 514.2.18979.###
AB Part Number Explanation
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is sup pliedwi thout liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
A TT GROUP COMPANY
AB CONNECTORS LTD.
IF NOT , A NEW DRAWING NUMBER MUST
THE PART REMAINS INTERCHANGEABLE.
THIS DRAWING MAY ONLY BE ALTERED IF
ANGULAR 2
HOLE DIAMETERS 0.05
ALL DECIMAL PLACES 0.1
MODIFICATIONS MUST BE CARRIED OUT USING CAD SYSTEM
TOLERANCES UNLESS OTHERWISE STATED
MATERIAL:
PROFILE OF A SURFACE
PROFILE OF A LINE
PARALLELISM
CYLINDRICITY
ROUNDNESS
FLATNESS
STRAIGHTNESS
CHARACTERISTIC
GEOMETRIC TOLERANCE SYMBOLS
A3
TOLERANCES. NOTES. ETC. SEE BS308
FOR EXPLANATION OF DIMENSIONS.
SQUARENESS
SYMMETRY
CONCENTRICITY
POSITION
RUN OUT
ANGULARITY
CHARACTERISTIC
M.M.C.
SYM
M
SYM
CHKD
DATE
DRAWN
BE TAKEN.
WORKED TO.
NOT TO BE
PURPOSES ONLY.
FOR QUOTATION
DRAWING
All Dimensions are in mm
DESCRIPTION OF L AST CHANGE
c ABConnectors Ltd. This document and the information contained he reinm ay not be copied, used or disclosed, in whole
or in part, except with the prior written permission o f AB CONNECTORS LTD., or if this document has been produced
under a contract with another party as expressly authorised under that contract. It is sup pliedwi thout liability for errors or
omisions.
Issued By Date
PRODUCT DRAWING NUMBER
TITLE:
Do not scale this drawing Variations start at 001
FINISH
CODE
FINISH:
VARN
PROJECTION
Issue
= CRITICAL CHARACTERISTIC ◊= SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION)
38999 PC TAIL DATA SHEET
N/A
ABAC.CDS.0003
AG
25/11/2010
ABAC.CDS.0003
NOTES
1. DIMENSIONS IN MILLIMETRES.
2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED.
ØA
B
C
ØA
B
C
JAM NUT STYLE
SHELL SIZE C MIN C MAX
9 12.21 13.36
11 12.21 13.36
13 12.32 13.34
15 12.32 13.34
17 12.21 13.36
19 12.01 13.16
21 13.01 14.16
23 13.01 14.16
25 13.03 14.16
SQUARE FLANGE STYLE
SHELL SIZE C MIN C MAX
9 10.49 11.63
11 10.49 11.63
13 10.49 11.63
15 10.49 11.63
17 10.49 11.63
19 10.49 11.63
21 10.49 11.63
23 10.49 11.63
25 10.51 11.63
CONTACTS
CONTACT SIZE MOD CODE REF. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
Table 1
Straight PCB contacts for 38999 Series III connector
Pin Contact Socket Contact
Contact part numbers
ØA
B
B
ØA
ØA
B
B
ØA
pin
Contacts
Contact Size Mod Code Ref. ØA B
22D M03 0.70 8.50
22D M09 0.70 4.00
22D M10 0.50 5.10
20 M09 0.70 5.10
16 M09 1.15 5.10
ABAC
contacts for use with pcb tail
Contact Part No.
Size 22D pin contact with PCB tail 514.2.18970.###
Size 22D socket contact with PCB tail 514.2.18977.###
Size 20 pin contact with PCB tail 514.2.18971.###
Size 20 socket contact with PCB tail 514.2.18978.###
Size 16 pin contact with PCB tail 514.2.18972.###
Size 16 socket contact with PCB tail 514.2.18979.###
socket pin
Size Colour
Code MS No./Size Catalogue No.
22D Black MS27488-22 523/2/18230/004
20 Red MS27488-20 523/2/18230/003
16 Blue MS27488-16 523/2/18230/002
12 Yellow MS27488-12 523/2/18230/001
ABAC
grommet filler plugs
Contact Size Contact
Part No.
Insertion Tool
Part No.
Extraction Tool
Part No.
22D 523/4/18219/000
523/4/18241/000 558/I/05267/000 558/I/05254/002
20 523/4/18225/000
523/I/18242/000 558/I/05253/000 558/I/05254/000
16 523/4/18227/000
523/4/18243/000 558/I/05251/000 558/I/5252/000
12 523/4/18229/000
523/4/18244/000 558/I/05251/001 558/I/05252/001
8523/4/18248/000
523/4/18249/000 558/1/05307/001 558/1/05308/001
Crimping Tools
Tools conforming to MIL-C-22520 can be used to crimp 38999 connector contacts.
Recommendation for the various contact types and sizes are as follows:
The following crimp tools are all available from the approved MIL. Spec. tool manufacturers.
Crimping Tool Positioner or Turret Die Contact Type / Size
M22520/2-01
M22520/7-01
M22520/2-09
M22520/7-07 22D, Pins
M22520/2-01
M22520/7-01
M22520/2-07
M22520/7-05 22D, Socket
M22520/1-01
M22520/2-01
M22520/7-01
M22520/1-04
M22520/2-10
M22520/7-08
20 Pin, 20 Socket
M22520/1-01
M22520/7-01
M22520/1-04
M22520/7-04 16 Pin, 16 Socket
M22520/1-01 M22520/1-04 12 Pin, 12 Socket
The 38999 insertion and extraction tools have been designed for ease of use for operation and
dependability. When harnesses are regularly produced using 38999 connectors these tools are highly
recommended to replace the temporary tools provided with the connector. The wire gripping feature
provides for extraction, without damage to either contact, wire or the sealing features. The metal tips
provide the proper balance between the hardness necessary for long usage and the resiliency needed to
prevent tip breakage under constant use.
ABAC
insertion & extraction
Crimping Tool Positioner or Turret Die Contact Type / Size
M22520/2-01 K709 Inner Contact
M22520/5-01 Y631 Intermediate Contact
& Outer Contact
Size 8 Twinax Crimping Tool:
31
ABAC
ABAC
insertion & extraction
Tool Description
AB Connectors Insertion tools (Fig. 1) are designed to
install pin and socket contacts into the MIL-DTL-38999
contact retention system. Positive retention of contacts
is accomplished by allowing the locking tabs of the
contact retaining spring to engage behind the contact
shoulder.
Preparation for Insertion
1. Remove grommet nut or outlet from the connector
and place over the wires to be installed.
2. Insert the crimped contact / wire assembly between
the tool tips, making sure that contact shoulder is
butted against tips.
Insertion Procedure
3. Align contact and tool with the selected hole in the
connector as nearly perpendicular to the grommet
face as possible (Fig. 2).
4. Carefully push the contact into the rubber
grommet hole and hard dielectric insert body
until the contact shoulder stops against the insert.
The contact retaining spring will then be felt or
heard locking into place (Fig. 3).
CAUTION: Do not squeeze the plastic tool handles
while the tool tips are inside the connector,
Spreading, angling, or rotating the tips can
damage them and the connector.
5. Withdraw the tool completely from the connector
by sliding it back along the wire insulation. Remove
tool and apply a gentle pull on the wire to confirm
that the contact is properly locked into place.
6. Install all other wired contacts in the same manner.
Unused holes must be filled with an unwired
contact followed by a sealing plug.
7. Reassemble grommet nut or outlet.
Fig. 2
Fig. 3
ABAC
contact insertion
Fig. 1
Tool Description
AB Connectors Extraction tools (Fig. 1a) are designed
to extract pin and socket contacts from the MIL-DTL-
38999 contact retention system. Extraction of contacts
is accomplished by releasing the locking tabs of the
contact retaining spring.
Preparation for Extraction
1. Disassemble grommet nut or outlet from the
connector, allowing it to hang on the wire bundle.
2. Insert the wire of the contact to be extracted
between the tool tips (Fig 2a)
Extraction Procedure
3. Slide the tool tips down the wire insulation into
the rubber sealing grommet and hard dielectric
insert body until they stop against the contact
shoulder (Fig. 3a). If tips catch on the wire barrel
and will not enter to full depth, remove tool
completely and open and close handles to realign
tips.
CAUTION: Do not squeeze the plastic tool handles
while the tool tips are inside the connector.
Spreading, angling, or rotating the tips can
damage them and the connector.
4. With the tool tips firmly butted against the contact
shoulder, grip the wire insulation against the
serrated tool surface without permitting any slack,
and exert a light pull on the tool and wire to extract
the contact (Fig. 4a). Do not increase pull if contact
does not slide out easily - tool tips were not butted
properly and excessive tension will damage the
contact retaining spring. Remove tool completely
and repeat extraction procedure.
5. If wired contact is not replaced, fill unused holes
with an unwired contact followed by a sealing plug.
6. Reassemble grommet nut or outlet.
Fig. 1a
Fig. 3a
Fig. 2a
Fig. 4a
ABAC
contact extraction
33
ABAC
ABAC
contact extraction
This information is to be used in conjunction with the Product Catalogue and Product Specification. Products may be safely used in the
applications for which they have been designed and within the specified ratings and environments. If products are exposed to conditions outside
the performance ratings or specified environments they may constitute a hazard. In particular it should be noted that:-
1. Material Content of Products.
Circular Connectors generally use metalwork parts made of copper, copper alloy, aluminium alloy, aluminium-bronze, phosphor-bronze or steel,
which, dependant on the particular application, may be passivated and protected with cadmium or zinc plate – in conjunction with chromated or
anodised surface finishes. The insulating materials can be either natural or synthetic rubber, together with plastic or glass filled plastic moulded
parts. Contact materials vary with product type but are usually made of copper, copper alloy, nickel, phosphor-bronze, alumel, chromel or steel.
2. Electric Shock, Burns and Fire.
Hazard can occur if the product is used outside the specified parameters or if the product is damaged, wrongly wired or poorly assembled, or
poorly integrated into larger equipment, or contaminated with conductive fluids. Live circuit terminations must be protected and live circuits
never broken by demating products.
Hotspots may be created when resistance is increased due to damage or incorrect integration particularly soldering, crimping or loose
terminations. Overheating can cause breakdown of insulation, electric shot, burns or, ultimately, fire. In the event of fire noxious and/or toxic
fumes may be released and, in these circumstances, any fire involving the product should be dealt with by personnel properly equipped.
Connector products with exposed terminators or contacts should not be used on the current supply side of a circuit with exposed contacts on an
unmated product. Before making a circuit live, the product and wiring should be checked to ensure that there is no damage and no electrically
conducting debris present. Circuit resistance checks should also be conducted before making the circuit live. Always ensure that the correct tools,
(specified by AB Connectors Ltd.) are employed for crimping and assembly and that connectors are assembled and wired by properly trained
personnel.
3. Disposal of Products.
Products should not be burnt.
4. Use Transport and Storage of Products.
Care must be exercised to avoid damage to any part of the products during transporting, storage or use. The products, as manufactured, are free
of sharp edges. Abnormal transit or storage conditions and abuse during installation can give rise to damage. Products should not be used in a
damaged condition. Improper storage (particularly of damaged products) can give rise to additional hazards particularly corrosion. Your attention
is specifically drawn to the need of proper storage of products containing cadmium and you are advised to see the Guidance Note from the
Health and Safety Executive on Cadmium - Health and Safety Precautions.
Safety Rules
1. Ensure all conductor wires are capable of withstanding the electrical and environmental conditions of the application.
2. Always use the correct assembly tools for cables, contacts and connectors.
3. Make circuit resistance checks before making a circuit live.
4. Always protect live circuits and never demate a live connector.
5. Never use a damaged connector.
6. Never burn discarded connectors or cable.
7. IF IN DOUBT, ASK.
N. B. Additional information on the products and the materials used in them may be obtained from the Sales Department of AB Connectors Ltd.
Shelf life for rubber components
AB Connectors incorporate a number of rubber components within their connectors. Most rubbers change in physical properties during
storage e.g. excessive hardening, softening, cracking or other surface degradation. These changes may be the result of particular factors or a
combination of factors such as light, heat, humidity, oils or solvents.
With a few simple precautions the shelf life may be considerably lengthened.
The storage temperature should be between +5 and +25 degrees C. Direct contact with sources of heat such as boilers, radiators and direct
sunlight should be avoided. It is advisable to cover any windows of storage rooms with a red or orange coating or screen. The relative humidity in
the storeroom should be below 70%. Very moist or very dry conditions should be avoided. Condensation should not occur.
If the above recommendations are adhered to, then AB Connectors would warrant a shelf life of four years for its products.
N. B. The company reserves the right and may change or vary specification without prior written notice.
ABAC
safety information
34 ABAC
TT electronics companies adopt a responsible attitude
towards the protection of the environment
TT electronics and the environment
We strive to meet the requirements of all applicable environmental
laws and regulations, to continuously improve environmental
performance and to contribute to long-term economic,
environmental and social sustainability.
As part of TT electronics’ Group Corporate Social Responsibility
(CSR) Programme, we engage with industry bodies, like the
Electronics Industry Citizenship Coalition (EICC) and Carbon
Trust, to support these goals and to maintain ethical supply chains.
The CSR programme has opened up a network
for TT electronics, across industry leading bodies,
helping us to benchmark our environmental
approach.
Environmental Deployment:
Each site is encouraged to attain the latest quality and •
environmental accreditation and companies have attained
ISO 9001, ISO 14001, QS 900 and TS16949, where appropriate.
Our companies utilise energy effi cient means of manufacture •
and seek to reduce, reuse and recycle waste and arrange
for disposal of other waste responsibly.
In collaboration with customers and suppliers, TT electronics’
product and process development engineers work continuously to
meet the demands of a more environmentally demanding
market place.With every new vehicle platform, the increasing
use of electronics enables improved techniques to be utilised
for reducing emissions and improving fuel economy. The
continued drive for a cleaner environment is behind research
and development into future generations of vehicles and
personal transport systems. Many of these will incorporate
new and novel forms of power plants including hybrid engines,
fuel cells and plug in electrics. These exciting and technically
advanced power sources will be controlled using new generations
of electronic functional systems incorporating technology from
TT electronics in the form of components and systems.
TT electronics companies have invested, heavily, in design
engineering, process control and modern manufacturing
equipment. An essential part of product development is the
validation of products to customer specifi c requirements. In
most of our companies, this process is carried out in-house on
independently certifi ed test and validation facilities.We are
committed to partnerships with suppliers and encourage a
talented, fully involved and committed workforce to achieve
our objectives.
Each of our businesses adopts a high level of customer focus,
and is committed to continuous improvement by utilising
tools and methods including lean manufacture, Kaizen
and Six- Sigma.
We believe that the ultimate measure of quality is customer
satisfaction and that continued growth must be based on
optimising and improving our quality performance.
35
ABAC
Global Sales Offi ces
Email: sales@ttelectronics-na.com
North America
Email: sales@ttelectronicseurope.com
Europe
Email: sales@ttelectronicsasia.com
Asia
TT electronics Clive House, 12-18 Queens Road, Weybridge, Surrey, KT13 9XB, UK
www.ttelectronics.com Email: info@ttelectronics.com
2ABAC
Contents
03 Company Profi le
04 About TT Electronics
06 Technical Information
08 Part number explanations
09 Orientation
10 Insert Arrangements
11 Insert Arrangement Specifi cation
14 Receptacle Type 20 / Receptacle Type 24
15 Inline Receptacle Type 12 /
Box Mounting Receptacle Type 13
16 Wall Mounting Receptacle with pcb stand-off Type 14
17 Jam Nut Receptacle with pcb stand-off Type 15
18 Bulkhead Connector Type 11 /
Recommended Jam Nut Torque Values
19 Fixed Connector with PC Tails
20 MIL-DTL-38999 Plug Type 26 /
MIL-DTL-38999 Integral Backshell Type 37
21 Mated Connector Dimensions / Panel Cut out Information
22 Straight backshell for band termination & heat shrink
boot
23 Right angle backshell for band termination & heat shrink
boot
24 Straight Screen Trap Adapter
25 90º Angled Screen Trap Adapter
26 Fixed Protective Caps
27 Free Protective Caps
28 Stowage Receptacle / Screened Gaskets
29 Contacts
30 Insertion & Extraction
31 Contact Insertaion
32 Contact Extraction
33 Safety Information
34 TT Electronics and the Environment
35 Global Sales Offi ces
Global Sales Offices
North America
Email: sales@ttelectronics-na.com
TT electronics Clive House 12-18 Queens Road Weybridge, Surrey KT13 9XB, UK
www.ttelectronics.com Email: info@ttelectronics.com
Asia
Email: sales@ttelectronicsasia.com
Europe
Email: sales@ttelectronicseurope.com
ABAC
MIL-DTL-38999 Series III
Belief in Technology
+44 (0) 1443 740331 www.ttabconectors.com sales@ttabconnectors.com
www.ttelectronics.com
© AB Connectors Ltd 08.11 AB Connectors
AB Connectors Limited Abercynon, Mountain Ash, Rhondda Cynon Ta , CF45 4SF