SENSITRON
SEMICONDUCTOR
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 58 6 7600 • Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • e-mail address - sales@sensitron.com •
SEN-5282-2
TECHNICAL DATA
PART NUMBER SEN-5282-2, REV E
High Pulse Power Mil-STD-1275 Transzorb
Application:
• +28V DC systems
Protection Level:
• MIL-STD-1275 Compliant; 100V Surge withstanding with 0.5-ohm source impedance
Key Features:
• Allows the use of 55V high efficiency FET
• Increase system reliability through eliminating av alanche FET operation
• Clamping below 55V DC for both 100V and 250V pulse
• High Pulse Power Capability
• Non-Hermetic version
Part Ordering Information:
• SEN-5282-2: with threaded terminals
Rating Condition Symbol Min Max Units
Peak Pulse Power Dissipation @ 250C, 1ms Ppk - 60 KW
Steady State Power Dissipation @ 250C P - 40 Watts
Reverse Stand-Off Voltage - VWM - 33 Volts
Reverse Leakage @ VWM ID - 25 μA
Breakdown Voltage @ 10 mA V(BR) 36.7 - Volts
Clamping Voltage @ IPP Vc - 49 Volts
Peak Pulse Current - I PP 120 Amps
T clamping 0 Volts to V(BR) - < 1x 10 –8 Seconds
Operating & Storage Temp. - Top& Tstg -55 + 150 0C
SENSITRON
SEMICONDUCTOR
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 58 6 7600 • Fax (631) 242 9798 •
• World Wide Web - http://www.sensitron.com • e-mail address - sales@sensitron.com •
SEN-5282-2
PART NUMBER SEN-5282-2, REV E
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by u sing semiconductor devices that f eature assure d s afety or by me an s of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be li able for any failure in a semiconductor device or any secondary da mage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in thei r application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
SEN-5282-2
(threaded terminals)
