4-line EMC filters Series/Type: B84144* The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B84144G0250S000 B84144B*S120, B84144B*S121 B84144G0500S000 B84144B*S120, B84144B*S121 B84144G1000S000 Date of Withdrawal 2009-03-13 Deadline Last Orders 2009-06-30 Last Shipments 2009-09-30 2009-03-13 2009-06-30 2009-09-30 2009-03-13 2009-06-30 2009-09-30 Ordering Code B84144G1600S000 Substitute Product Date of Withdrawal 2009-03-13 Deadline Last Orders 2009-06-30 Last Shipments 2009-09-30 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. 4-line filters B84144A*R, B84144G*S for converters and power electronics Power line filters for 3-phase systems Rated voltage 440/250 V AC, 50/60 Hz Rated current 16 to 1600 A Alternative version Series B84144A*R120 and B84144B*S120/S121 offer a low-cost solution. Construction 4-line filter Metal case Threaded bushes at end faces for RF-tight installation Features Optimized leakage current Easy to install Degree of protection up to 180 A: IP 201) Space-saving design Design complies with EN 133200, UL 1283, CSA C22.2 No.8 UL approval Applications General applications for power electronics UPS Wind farms For machine tools, textile and packaging machines Terminals Finger-safe terminal blocks for filters up to 180 A Busbars for filters 250 to 1600 A Marking Marking on component: Manufacturer's logo, ordering code, rated voltage, rated current, climatic category, date code Minimum marking on packaging: Manufacturer's logo, ordering code 1) To IEC 60529 Please read Cautions and warnings and Important notes at the end of this document. 2 01/06 4-line filters B84144A*R, B84144G*S for converters and power electronics Typical circuit diagram LINE LOAD L1 L1' L2 L2' L3 L3' N N' PE PE SSB1076-F Technical data and measuring conditions Rated voltage VR 440/250 V AC, 50/60 Hz Rated current IR Referred to 40 C ambient temperature Test voltage Vtest 1770 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case), for 16 ... 50 A 2550 V DC, 2 s (lines/case), for 80 ...180 A 2121 V DC, 2 s (lines/case), for 250 ... 1600 A Overload capability (thermal) 1.5 * IR for 3 min per hour or 2.5 * IR for 30 s per hour Leakage current Ileak At 400 V AC, 50 Hz Climatic category (IEC 60068-1) 25/100/21 (-25 C/+100 C/21 days damp heat test) Approvals UL 1283 Please read Cautions and warnings and Important notes at the end of this document. 3 01/06 4-line filters B84144A*R, B84144G*S for converters and power electronics Characteristics and ordering codes VR AC V 440/250 IR Ileak Terminal cross section mA mm2 A Rtyp Approx. weight kg m Ordering code Approvals 16 4 < 3.5 10 2.2 B84144A0016R000 x 25 10 < 3.5 6 3.7 B84144A0025R000 x 36 10 < 3.5 3.5 3.7 B84144A0036R000 x 50 10 <6 1.3 4.0 B84144A0050R000 x 80 25 <6 0.7 120 50 <6 0.5 9.5 10 B84144A0080R000 x B84144A0120R000 x 150 50 <6 0.35 10 B84144A0150R000 x 180 95 <6 0.25 13 B84144A0180R000 x 250 Busbars x <6 0.095 32 B84144G0250S000 500 <6 0.060 53 B84144G0500S000 - 1000 <6 0.030 140 B84144G1000S000 - 1600 <6 0.020 185 B84144G1600S000 - x = approval granted Not for new design. Substitute B84144B*S120/S121. Please read Cautions and warnings and Important notes at the end of this document. 4 01/06 4-line filters B84144A*R, B84144G*S for converters and power electronics Dimensional drawings 301 550.4 12.50.4 10.1 81 max. 381 20.50.5 B84144A0016R000 (16 A) PE M6 x 22.5 163 max. 600.4 12.51 86 max. 700.2 Marking LINE LOAD 5.50.1 113 max. N L3' L2' L1' 1000.3 N L3 L2 L1 4 x M5 x 6 Terminal blocks 4 mm 2 Tightening torque 0.6 ... 0.8 Nm 141 max. SSB2221-Q-E 301 650.4 12.50.4 10.1 91 max. 461 310.5 B84144A0025R000, B84144A0036R000, B84144A0050R000 (25 A, 36 A, 50 A) PE M6 x 25 216 max. 1000.4 22.51 126 max. 800.2 LINE LOAD 6.60.2 166 max. 1400.3 156 max. Marking N L3' L2' L1' N L3 L2 L1 4 x M6 x 6 Terminal blocks 10 mm 2 Tightening torque 1.5 ... 1.8 Nm Please read Cautions and warnings and Important notes at the end of this document. 5 01/06 SSB1078-W-E 4-line filters B84144A*R, B84144G*S for converters and power electronics 551 1100.4 150.4 PE M10 x 32 1.00.1 181 141 max. 831 48.50.5 B84144A0080R000 (80 A) 300 max. 1100.4 141 max. 1150.2 4 x M6 x 6 93.1 L2' LOAD 171 max. LINE N N L3 L3' L2 Marking 1550.3 L1 L1' 6.60.2 Terminal blocks 25 mm 2 Tightening torque 4 ... 4.5 Nm 221 max. SSB2222-Y-E 540.5 B84144A0120R000, B84144A0150R000 (120 A, 150 A) 551 1.00.1 150.4 PE M10 x 32 1100.4 141 max. 871 181 348 max. 1100.4 141 max. 1150.2 4 x M6 x 6 LOAD 261 max. Please read Cautions and warnings and Important notes at the end of this document. 96.8 171 max. LINE 1550.3 Marking N L3' L2' L1' N L3 L2 L1 6.60.2 Terminal blocks 50 mm 2 Tightening torque 6 ... 8 Nm 6 01/06 SSB2223-7-E 4-line filters B84144A*R, B84144G*S for converters and power electronics PE M10 x 35 404 max. 301 max. 620.8 1200.4 1.20.1 1100.4 141 max. LOAD 100 6.60.2 Terminal blocks 95 mm 2 Tightening torque 15 ... 20 Nm 1650.4 Please read Cautions and warnings and Important notes at the end of this document. 171 max. LINE N L3' L2 Marking 1550.3 L2' L1 L1' 4 x M6 x 6 L3 N 160.5 100.4 141 max. 1051 740.5 B84144A0180R000 (180 A) 7 01/06 SSB1087-V-E 4-line filters B84144A*R, B84144G*S for converters and power electronics B84144G0250S000 (250 A) 4 x M8 x 7 1900.5 N 4 120 24 PE M10 x 30 PE M10 x 30 2001 30 o12 o10.5 L3 LINE LOAD 285 L2'/ N' 2601 L2/ N 230+2 Marking 241 L1' L1 L3' 15 _ 3 = 3703 = 4606 Please read Cautions and warnings and Important notes at the end of this document. SSB0996-A 8 01/06 110 171_ 4 N 89.5 4.50.5 N L2 L3 1050.5 L1 48 350+3 34 4 x M8 x 7 4-line filters B84144A*R, B84144G*S for converters and power electronics B84144G0500S000 (500 A) 4 x M8 x 7 2100.5 1500.5 N N L2 L1 N 6 PE M10 x 30 60 26 PE M10 x 30 L3 150 2801 30 o12 L3 L2'/ N' LOAD LINE 305 L2/ N 250 L1' Marking 2801 L1 30+3 o11 L3' 15 +1 = 5103 = 5903 Please read Cautions and warnings and Important notes at the end of this document. SSB0997-I 9 01/06 134.5 198 _ 4 60.5 500 56.5 101.5 4 x M8 x 7 4-line filters B84144A*R, B84144G*S for converters and power electronics B84144G1000S000 (1000 A) 4 x M8 x 7 3600.8 110.5 650+4 2400.8 L3 N N PE M12 x 30 65 38 PE M12 x 30 28 8 N L2 L1 78 163 211 290 _ 3 4 x M8 x 7 262 3201 40 o12 L1 L1' Marking L2/ N LINE 50+10 400+3 4401 465 o14 L2'/ N' LOAD L3 L3' 40 = 6603 8403 Please read Cautions and warnings and Important notes at the end of this document. 20+1 = SSB0998-R 10 01/06 4-line filters B84144A*R, B84144G*S for converters and power electronics B84144G1600S000 (1600 A) 4 x M8 x 7 3600.8 110.5 680+4 L3 2400.8 N N PE M12 x 30 65 38 PE M12 x 30 28 8 N L2 L1 78 163 211 290 _ 3 4 x M8 x 7 262 3401 40 o12 L1 L1' Marking L2/ N LINE 50+10 400+3 4401 465 o14 L2'/ N' LOAD L3 L3' 40 = 6903 8703 Please read Cautions and warnings and Important notes at the end of this document. 20 +1 = SSB0999-Z 11 01/06 4-line filters B84144A*R, B84144G*S for converters and power electronics Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 16 ... 36 A 100 dB Filters for 50 A SSB1677-Q 80 dB 60 40 40 20 20 10 5 10 6 10 7 100 dB 0 10 4 Hz 10 8 f Filters for 80 A SSB1090-F 10 6 10 7 Hz 10 8 f 80 80 70 60 60 50 50 40 40 30 30 20 20 10 10 10 7 0 10 4 Hz 10 8 f Please read Cautions and warnings and Important notes at the end of this document. 12 B84144A0120R000 B84144A0150R000 dB 70 10 6 SSB1091-N 100 10 5 10 5 Filters for 120 and 150 A B84144A0080R000 0 10 4 SSB1678-Y B84144A0050R000 80 60 0 10 4 100 B84144A0016 ... A0036R000 01/06 10 5 10 6 10 7 Hz 10 8 f 4-line filters B84144A*R, B84144G*S for converters and power electronics Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 180 A 100 dB Filters for 250 to 1600 A SSB1092-W SSB1000-K 100 B84144A0180R000 B84144G*S000 dB 80 80 70 60 60 50 40 40 30 20 20 10 0 10 4 10 5 10 6 10 7 0 4 10 Hz 10 8 f Please read Cautions and warnings and Important notes at the end of this document. 13 01/06 10 5 10 6 10 7 Hz 10 8 f EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences. Death, serious bodily injury and substantial material damage to equipment may occur if the appropriate safety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC filters may be used only for their intended application within the specified values in lowvoltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place of application must comply with all specifications for the filter used. Warnings It shall be ensured that only qualified persons (electricity specialists) are engaged on work such as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger of electric shock. EMC filters contain components that store an electric charge. Dangerous voltages can continue to exist at the filter terminals for longer than five minutes even after the power has been switched off. The protective earth connections shall be the first to be made when the EMC filter is installed and the last to be disconnected. Depending on the magnitude of the leakage currents, the particular specifications for making the protective-earth connection must be observed. Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequencies that may cause resonances etc. can lead to destruction of the filter housing. EMC filters must be prot ected in the application against impermissible excee ding of the rated currents by suitable overcurrent protective. 14 01/06 EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas o f a pplication. T hese statements are bas ed on o ur know ledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expres sly point out that su ch st atements can not b e reg arded as b inding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than t he customers t hemselves. For t hese reasons , it is always ult imately incum bent on t he customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current sta te o f the art, even if th ey are o perated as specified. I n customer appli cations requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of t he c ustomer a pplication or ot her ac tion t aken by t he cu stomer (e. g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order t o sat isfy c ertain technical requirem ents, some of t he products describ ed in t his publication may co ntain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the I nternet (www. epcos.com/material). S hould you hav e any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may ch ange from time to time. The same is t rue of the corresponding product specifications. Pleas e chec k t herefore to what ext ent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We a lso reserve the ri ght t o discontinue p roduction a nd d elivery of p roducts. Consequently, we cannot guarantee that all pr oducts named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The t rade nam es EPCOS, EPCOS-Jones, Baoke, C eraDiode, CSSP, ML SC, Phas eCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 15 01/06 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EPCOS: B84144A16R B84144A36R B84144G1600S B84144A25R B84144A150R B84144A50R B84144G1000S B84144G250S B84144A120R B84144A180R B84144A80R B84144G500S B84144A0150R000