7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MGD Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR - CP as an alternative AWSCR-MGD RoHS/RoHS II Compliant Moisture Sensitivity Level (MSL) - This product is not Moisture Sensitive - MSL = 1 FEATURES: * Low resonant impedance * Built-in load capacitors * Suitable for RoHS compliant reflow * Low cost solution for cost sensitive applications Pb in ceramic, exemption (7c-I) 7.4 x 3.4 x 1.8mm | | | | | | | | | | | | | | | APPLICATIONS: * Remote controls, Microprocessor clocks, DVD & CD-ROMs, Electric appliances * Consumer electronics STANDARD SPECIFICATIONS: Parameters Frequency Range Minimum 1.84 Typical 33 - 20% 33 Maximum 8 100 100 50 30 33 + 20% 22 - 20% 22 22 + 20% Resonant Impedance (Ro) Standard Built-in Capacitance (C1=C2) Frequency Tolerance Frequency Stability -0.5 -0.3 Withstanding Voltage (1) D.C.Voltage Rating Voltage (2) A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) (10 years) 50 100 -25 -55 Units MHz pF 0.5 0.3 % % V 6 15 V Vp-p. M C C % 85 85 0.3 -0.3 Notes 1.84 MHz - 2.39 MHz 2.40 MHz - 2.99 MHz 3.00 MHz - 3.49 MHz 3.50 MHz - 8.00 MHz 1.84 MHz - 2.39 MHz 2.40 MHz - 2.99 MHz 3.00 MHz - 3.49 MHz 3.50 MHz - 8.00 MHz -25C to +85C DC , 1 min 10V, 1min TEST CIRCUIT: X: Ceramic Resonator 1. Input 2. Ground 3. Output Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition (Temp: 253C, Humidity: 6510% R.H.) is regulated to measure OPTIONS AND PART IDENTIFICATION: (Left blank if standard) AWSCR - X.XX Frequency Load Capacitance Contact ABRACON for Built-in Capacitance options Frequency in MHz ABRACON IS LLC Packaging T: 1000pcs/Reel T4: 4000pcs/Reel 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale, please visit: www.abracon.com REVISED: 12.16.2016 ABRACON IS ISO9001-2008 CERTIFIED 7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MGD Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative AWSCR-MGD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) 7.4 x 3.4 x 1.8mm | | | | | | | | | | | | | | OUTLINE DRAWING: Recommended Land Pattern Dimension: mm TAPE & REEL: T: 1000pcs/reel T4: 4000pcs/reel Reel Quantity 1000 (T) 4000 (T4) A B W T 1792 3303 60 typ. 80 min 16.4 min 16.4 min 22.4 max 22.4 max Pieces per reel 1000 typ. 4000 typ. Carrier tape size 16 16 Dimension: mm Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. ABRACON IS LLC 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale, please visit: www.abracon.com REVISED: 12.16.2016 ABRACON IS ISO9001-2008 CERTIFIED | 7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MGD Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative AWSCR-MGD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) 7.4 x 3.4 x 1.8mm | | | | | | | | | | | | | | REFLOW PROFILE: Dimension: mm CAUTION: * Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. * This component is not hermetically sealed. Do not clean or wash the component. * Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering. * Do not expose the component to open flame. * This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly evaluated in the particular application. * Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. * This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant application. Contact Abracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS CE R LLC 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale, please visit: www.abracon.com REVISED: 12.16.2016 ABRACON IS ISO9001-2008 CERTIFIED |