7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
|||||||| | | | | | | |
AWSCR-MGD
STANDARD SPECIFICATIONS:
OPTIONS AND PART IDENTIFICATION:
APPLICATIONS:
FEATURES:
• Built-in load capacitors
• Suitable for RoHS compliant reflow
• Low cost solution for cost sensitive applications
• Low resonant impedance • Remote controls, Microprocessor clocks,
DVD & CD-ROMs, Electric appliances
• Consumer electronics
7.4 x 3.4 x 1.8mm
AWSCR-MGD
TEST CIRCUIT:
(Left blank if standard)
AWSCR – X.XX
Frequency
Frequency in MHz
Load Capacitance
Contact ABRACON
for Built-in
Capacitance options
Packaging
T: 1000pcs/Reel
T4: 4000pcs/Reel
X: Ceramic Resonator
1. Input
2. Ground
3. Output
Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless
the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
Parameters Minimum Typical Maximum Units Notes
Frequency Range 1.84 8 MHz
100 1.84 MHz - 2.39 MHz
100 2.40 MHz - 2.99 MHz
50 3.00 MHz - 3.49 MHz
Resonant Impedance (Ro)
30
Ω
3.50 MHz - 8.00 MHz
33 – 20% 33 33 + 20% 1.84 MHz - 2.39 MHz
2.40 MHz - 2.99 MHz
3.00 MHz - 3.49 MHz
Standard Built-in Capacitance (C1=C2) 22 – 20% 22 22 + 20% pF
3.50 MHz - 8.00 MHz
Frequency Tolerance -0.5 0.5 %
Frequency Stability -0.3 0.3 % -25ºC to +85ºC
Withstanding Voltage 50 V DC , 1 min
(1) D.C.Voltage 6 V
Rating Voltage (2) A.C. Voltage 15 Vp-p.
Insulation Resistance 100 MΩ 10V, 1min
Operation Temperature -25 85 ºC
Storage Temperature -55 85 ºC
Aging Rate (Fosc) (10 years) -0.3 0.3 %
Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL = 1
ABRACON IS
ABRACON IS
ISO9001-2008
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
CERTIFIED
LLC
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR - CP as an alternative
7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
|||||||||| | | | | |
AWSCR-MGD
7.4 x 3.4 x 1.8mm
AWSCR-MGD
Recommended Land Pattern
Dimension: mm
OUTLINE DRAWING:
TAPE & REEL:
Reel
Quantity
Pieces per
reel
Carrier tape
size
ФA ФB W T
1000 (T) 179±2 60 typ. 16.4 min 22.4 max 1000 typ. 16
4000 (T4) 330±3 80 min 16.4 min 22.4 max 4000 typ. 16
T: 1000pcs/reel
T4: 4000pcs/reel
Dimension: mm
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the
product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging
according to MSL 1 requirements to maintain solderability.
ABRACON IS
ABRACON IS
ISO9001-2008
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
CERTIFIED
LLC
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative
7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
||||||||||| | | | |
AWSCR-MGD
7.4 x 3.4 x 1.8mm
AWSCR-MGD
CER
Dimension: mm
REFLOW PROFILE:
CAUTION:
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
• Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
• This component is not hermetically sealed. Do not clean or wash the component.
• Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering.
• Do not expose the component to open flame.
• This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly
evaluated in the particular application.
• Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm
the solderability and characteristics for the product prior to use.
• This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant
application. Contact Abracon Corporation prior to using this product when in doubt.
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
ABRACON IS
ABRACON IS
ISO9001-2008
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
CERTIFIED
LLC
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative
