DC/DC Converters THN 30 Series, 30 Watt Features Highest power density 30W converter! CB Scheme UL 60950-1 Ultra compact size: 1.0" x 1.0" x 0.4" UL 60950-1 Shielded metal case with isolated baseplate Wide 2:1 input voltage range Very high efficiency across full load range up to 92% Over temperature protection Operating temp. range -40C to +80C and up to 85 C with heat-sink Ultra low no load input current Remote On/Off control Output voltage adjustable I/O isolation voltage 1500 VDC RoHS 2011/65/EU compliant 3-year product warranty The THN-30 series is the latest generation of high performance DC/DC converter modules with highest power density. The product achieves 30W output power while it comes in a metal case with dimensions of only 1.0"x 1.0"x 0.4". All models have an wide 2:1 input voltage range and precisely regulated output voltages, even under no load conditions. Highest efficiency across load range makes this product very reliable and applicable in temperature ranges of up to 85C. With a low input current at no load and remote On/Off control these converters are the ideal solution for battery-operated systems. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THN 30-1210 Order code 3.3 VDC 7000 mA 86 % THN 30-1211 5.0 VDC 6000 mA 89 % 12 VDC 2500 mA 89 % 15 VDC 2000 mA 89 % 24 VDC 1250 mA 89 % THN 30-1222 12 VDC 1250 mA 89 % THN 30-1223 15 VDC 1000 mA 90 % THN 30-2410 3.3 VDC 7000 mA 87 % THN 30-2411 5.0 VDC 6000 mA 90 % THN 30-2412 12 VDC 2500 mA 91 % 15 VDC 2000 mA 91 % 24 VDC 1250 mA 91 % THN 30-2422 12 VDC 1250 mA 91 % THN 30-2423 15 VDC 1000 mA 91 % THN 30-4810 3.3 VDC 7000 mA 87 % THN 30-4811 5.0 VDC 6000 mA 89 % 12 VDC 2500 mA 90 % 15 VDC 2000 mA 91 % 24 VDC 1250 mA 91 % THN 30-4822 12 VDC 1250 mA 91 % THN 30-4823 15 VDC 1000 mA 92 % THN 30-1212 THN 30-1213 THN 30-1215 THN 30-2413 THN 30-2415 THN 30-4812 THN 30-4813 THN 30-4815 http://www.tracopower.com Input voltage range 9 - 18 VDC (12 VDC nominal) 18 - 36 VDC (24 VDC nominal) 36 - 75 VDC (48 VDC nominal) Page 1 of 4 DC/DC Converters THN 30 Series 30 Watt Input Specifications Input current at no load (at nominal input voltage) 12 V models: 12 mA typ 24 V models: 10 mA typ. 48 V models: 8 mA typ. Start-up voltage 12 V models: < 9.0 VDC 24 V models: < 18 VDC 48 V models: < 36 VDC Under voltage shut down (lock-out circuit) 12 V models: 8.0 VDC typ. 24 V models: 16 VDC typ. 48 V models: 33 VDC typ. Surge voltage (1 sec. max.) 12 V models: 25 V max 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 30 mAp-p typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor see: application note ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 2 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Recommended input fuse (slow blow) 12 V models: 6300 mA 24 V models: 3150 mA 48 V models: 1600 mA Output Specifications Voltage set accuracy 1 % Output voltage adjustment range (see application note) 15 & 24 VDC models: +20 / -10 % other single output models: 10 % Regulation - Input variation (Vmin - Vmax) single output models: dual output models: - Load variation (0 - 100 %) single output models: dual output models balanced load: dual output models unbalanced load (25% /100%): 0.2 % max. 0.5 % max. 0.2 % max. 1.0 % max. 5.0 % max. Minimum load not required Ripple and noise (measured with output capacitor) 3.3 & 5.0 VDC (20 MHz bandwidth) 12 & 15 VDC 24 VDC dual output models: models: models: models: 75 mVp-p with (22F/25V X7R 1812 MLCC) 75 mVp-p with (2x 22F/25V X7R 1812 MLCC) 75 mVp-p with (2x 6.8F/50V X7R 1812 MLCC) 60 mVp-p with (10F/50V X7R 1812 MLCC) Temperature coefficient 0.02 %/K Output current limitation at 140 % of Iout max. Short circuit protection hiccup, automatic recovery Over voltage protection 3.3 5 12 15 24 VDC VDC VDC VDC VDC models: models: models: models: models: 3.7 - 5.4 Vout 5.6 - 7.0 Vout 13.5 - 19.6 Vout 18.3 - 22.0 Vout 29.1 - 32.5 Vout Start up time (nominal Vin and constant resistive load) 30 ms max. (for power on and remote on) Transient response setting time 250 s typ. (25% load step change) http://www.tracopower.com Page 2 of 4 DC/DC Converters THN 30 Series 30 Watt Output Specifications Max. capacitive load 3.3 5 12 15 24 12 15 VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: 10'000 F 7'200 F 1'200 F 1'000 F 375 F 750 F (each output) 500 F (each output) General Specifications Temperature ranges - - - - Power derating - Operating without heat sink 2.2 %/K above +55C - Operating with heat sink 2.5 %/K above +60C Thermal impedance - Natural convection15.0C/W - Natural convection with heat sink 13.8C/W Operating without heat sink Operating with heat sink Case temperature Storage -40C to +80C (with derating) -40C to +85C (with derating) +105C max. -55C to +125C Thermal protection shutdown at 115C Humidity (non condensing) 5 % to 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70C, ground benign) 1.3 Mio. h Isolation voltage (60sec.) - Input/Output 1'500 VDC - Input, Output/Case 1'000 VDC Isolation capacitance - Input/Output 1'500 pF max. Isolation resistance - Input/Output (500 VDC) >1 GOhm Remote On/Off - On: 3.0 to 15 VDC or open circuit - Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2 - Off idle current: 2.0 mA Switching frequency (fixed, pulse width modulation) 3.3 & 5.0 Vout models: 275 kHz 10% other models: 330 kHz 10% Vibration and thermal shock MIL-STD-810F Safety approvals UL/cUL 60950-1 2nd +Am1, IEC/EN 60950-1 - Certification documents www.tracopower.com/overview/thn30 Physical Specifications Casing material copper Baseplate non conductive FR4 Potting material silicone (UL 94V-0 rated) Weight 16.5 g (0.58oz) Soldering temperature max. 265C / 10sec. Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Supporting documents: www.tracopower.com/overview/thn30 All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters THN 30 Series 30 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 3 5.6 9.9 2.5 10.16 10.16 (0.22) (0.39) (0.1) (0.4) (0.4) (1.0) 2.5 4 5 (0.1) Bottom view 25.4 (0.8) 20.32 1 2 6 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 +Vout +Vout 4 Trim Common 5 -Vout -Vout 6 Remote On/Off 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter o 1.0 (0.04) Pin pitch tolerances: 0.25 (0.01) Tolerances: 0.5 (0.02) Heat-Sink (Option) Order code: THN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 8 g (0.28oz) without converter Thermal impedance after assembling: 14.8 K/W 31.0 (1.22) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sink already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 16.5 (0.65) max. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 12, 2018 Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: THN 30-2411 THN 30-2412 THN 30-2423 THN 30-1211 THN 30-2415 THN 30-1213 THN 30-1223 THN 30-4815 THN 30-4812 THN 30-4813 THN 30-1212 THN 30-4822 THN 30-1215 THN 30-1222 THN 30-4823 THN 30-2413 THN 30-2422 THN 30-2410 THN 30-1210 THN 30-4810 THN 30-4811