Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A DESCRIPTION -NEPOC Series- ED 6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 mA CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET The PS7113-1A, -2A and PS7113L-1A, -2A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. FEATURES IN U The PS7113L-1A, -2A have a surface mount type lead. * 1 channel type (1 a output) or 2 channel type (1 a + 1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6, 8-pin DIP) * Low offset voltage * Ordering number of taping product : PS7113L-1A-E3, E4: 1 000 pcs/reel * Pb-Free product * Safety standards O NT : PS7113L-2A-E3, E4: 1 000 pcs/reel * UL approved: File No. E72422 * BSI approved: No. 8245/8246 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment DI SC <R> Document No. PN10269EJ02V0DS (2nd edition) Date Published July 2006 NS CP(K) The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. PS7113-1A,-2A,PS7113L-1A,-2A PACKAGE DIMENSIONS (in millimeters) PS7113-1A PS7113L-1A 4 1 2 3 9.250.5 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 7.62 1. 2. 3. 4. 5. 6. O NT 0 to 15 1 2 3 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 6.50.5 9.600.4 PS7113L-2A TOP VIEW TOP VIEW 1 2 3 5. 6. 7. 8. LED Anode LED Cathode LED Anode LED Cathode 9.250.5 5 4 MOS FET MOS FET MOS FET MOS FET 1. 2. 3. 4. 7 1 2 LED Anode LED Cathode LED Anode LED Cathode 6 3 5. 6. 7. 8. 5 4 MOS FET MOS FET MOS FET MOS FET 6.50.5 3.50.3 1.340.1 0.25 M 0 to 15 0.50.1 8 7.62 6.50.5 3.30.3 4.150.3 3.50.3 1. 2. 3. 4. 6 7 DI SC 8 0.10+0.10 -0.05 9.250.5 2 4 2.54 PS7113-2A 1.340.1 0.25 M 5 0.90.25 2.54 1.340.1 0.25 M 0.50.1 1.340.1 0.25 M 6 3.50.3 3.50.3 6.50.5 3.30.3 4.150.3 TOP VIEW 0.10+0.10 -0.05 5 IN U 1. 2. 3. 4. 5. 6. 6 ED TOP VIEW 9.250.5 2.54 Data Sheet PN10269EJ02V0DS 2.54 0.90.25 9.600.4 PS7113-1A,-2A,PS7113L-1A,-2A MARKING EXAMPLE No. 1 pin Mark PS7113-1A NL601 PS7113-2A Country Assembled Type Number Assembly Lot No. 1 pin Mark N L 6 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code O NT Rank Code PS7113-2A NL601 IN U N L 6 01 Country Assembled Type Number Assembly Lot ED PS7113-1A DI SC <R> Data Sheet PN10269EJ02V0DS 3 PS7113-1A,-2A,PS7113L-1A,-2A ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS7113L-1A PS7113L-1A-A PS7113L-1A-E3 PS7113L-1A-E3-A PS7113L-1A-E4 PS7113L-1A-E4-A PS7113-2A PS7113-2A-A PS7113L-2A PS7113L-2A-A PS7113L-2A-E3 PS7113L-2A-E3-A PS7113L-2A-E4 PS7113L-2A-E4-A Pb-Free Magazine case 50 pcs Standard products PS7113-1A (UL, BSI, CSA Embossed Tape 1 000 pcs/reel approved) Magazine case 50 pcs Embossed Tape 1 000 pcs/reel O NT *1 For the application of the Safety Standard, following part number should be used. 4 *1 ED PS7113-1A-A IN U PS7113-1A DI SC <R> Data Sheet PN10269EJ02V0DS PS7113-2A PS7113-1A,-2A,PS7113L-1A,-2A ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Ratings PS7113-2A, PS7113L-1A PS7113L-2A Forward Current (DC) IF 50 Reverse Voltage VR 5.0 PD 50 IFP 1 VL 100 IL 350 Power Dissipation Peak Forward Current MOS FET PS7113-1A, *1 Break Down Voltage Continuous Load Current Connection A *2 Connection B Pulse Load Current ILP Isolation Voltage PD *4 V mW/ch A/ch V mA/ch - - 700 (AC/DC Connection) Power Dissipation mA/ch 450 Connection C *3 BV PT Operating Ambient Temperature TA Storage Temperature Tstg 600 560 mA/ch 375 mW/ch 1 500 610 Vr.m.s. 850 mW -40 to +85 C -40 to +100 C O NT Total Power Dissipation Unit IN U Diode Symbol ED Parameter *1 PW = 100 s, Duty Cycle = 1% *2 Conditions: IF 2 mA. The following types of load connections are available. Connection A DI SC Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) - 4 6 5 4 6 5 IL 4 IL IL L L IL + I L - + VL (DC) + VL (DC) - *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-3 shorted together, 4-6 shorted together. (PS7113-1A) Pins 1-4 shorted together, 5-8 shorted together. (PS7113-2A) Data Sheet PN10269EJ02V0DS 5 PS7113-1A,-2A,PS7113L-1A,-2A RECOMMENDED OPERATING CONDITIONS (TA = 25C) Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ED Parameter ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode MOS FET Symbol Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff VD = 100 V Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 350 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A 0.03 IN U Current 250 Ron2 IF = 10 mA, IL = 350 mA, t 10 ms Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 , Turn-off Time *1, 2 toff PW 10 ms Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 O NT Coupled Conditions pF/ch 2.0 mA 0.9 2.5 1.3 3.0 ms 0.06 0.2 9 1.1 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V DI SC Input monitor Rin 90 % VO monitor Output RL 10 % ton toff *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms. <R> Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10269EJ02V0DS PS7113-1A,-2A,PS7113L-1A,-2A TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 80 60 40 0 -25 0 25 7585 50 200 100 0 -25 100 Ambient Temperature TA (C) 0 25 7585 50 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 250 1.6 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1.2 1.0 1 mA 0.8 -25 0 200 O NT 1.4 25 50 75 100 150 100 50 0 20 40 60 80 120 Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE DI SC IF = 10 mA 400 -4 10-5 Load Current IL (mA) Off-state Leakage Current ILoff (A) 100 Ambient Temperature TA (C) 10-3 10 100 Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE Forward Voltage VF (V) 300 IN U 20 400 ED Maximum Load Current IL (mA) 500 Output Capacitance Cout (pF) Maximum Forward Current IF (mA) 100 TA = 85 C 10-6 10-7 25 C 200 -0.4 -0.2 0 0.2 0.4 -200 10-8 10-9 0 20 40 60 80 -400 100 120 Load Voltage VL (V) Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10269EJ02V0DS 7 PS7113-1A,-2A,PS7113L-1A,-2A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA 2.5 25 Number (pcs) 2.0 1.5 1.0 0.5 15 10 25 50 0 100 75 VO = 5 V TURN-OFF TIME vs. FORWARD CURRENT VO = 5 V 0.25 Turn-off Time toff (ms) 25 15 10 0.20 O NT 20 0.15 0.10 0.05 5 5 10 15 20 25 30 35 0 40 Forward Current IF (mA) TURN-ON TIME DISTRIBUTION DI SC 30 10 5 1.3 1.4 1.5 15 20 25 30 35 40 Forward Current IF (mA) n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 15 1.2 10 TURN-OFF TIME DISTRIBUTION 20 1.1 5 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 1.0 0.30 30 20 15 10 5 1.6 0 0.02 0.04 0.08 Turn-off Time toff (ms) Turn-on Time ton (ms) Remark The graphs indicate nominal characteristics. 8 0.9 On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT 0 1.0 0.8 IN U 0 Ambient Temperature TA (C) Turn-on Time ton (ms) 20 5 0.0 -25 0 n = 50 pcs, IF = 10 mA, IL = 10 mA ED Normalized On-state Resistance Ron 3.0 Data Sheet PN10269EJ02V0DS 0.10 PS7113-1A,-2A,PS7113L-1A,-2A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 2.5 2.0 1.5 1.0 0.5 0 25 50 75 Ambient Temperature TA (C) 100 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 IN U 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V ED Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Ambient Temperature TA (C) DI SC O NT Remark The graphs indicate nominal characteristics. Data Sheet PN10269EJ02V0DS 9 PS7113-1A,-2A,PS7113L-1A,-2A TAPING SPECIFICATIONS (in millimeters) Tape Direction 0.3 PS7113L-1A-E4 PS7113L-2A-E4 O NT PS7113L-1A-E3 PS7113L-2A-E3 4.00.1 IN U 12.00.1 ED 10.40.1 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 21.00.8 1001.0 2.00.5 13.00.2 R 1.0 17.51.0 21.51.0 Packing: 1 000 pcs/reel 10 2.00.5 3302.0 DI SC Outline and Dimensions (Reel) Data Sheet PN10269EJ02V0DS 15.9 to 19.4 Outer edge of flange PS7113-1A,-2A,PS7113L-1A,-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less 60 seconds or less 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a ED * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C maximum chlorine content of 0.2 Wt% is recommended.) IN U (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) O NT Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow Time (s) (2) Wave soldering * Temperature * Time 10 seconds or less 120C or below (package surface temperature) DI SC * Preheating conditions 260C or below (molten solder temperature) * Number of times * Flux One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) <R> (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10269EJ02V0DS 11 PS7113-1A,-2A,PS7113L-1A,-2A USAGE CAUTIONS 1. Protect against static electricity when handling. O NT IN U ED 2. Avoid storage at a high temperature and high humidity. DI SC <R> 12 Data Sheet PN10269EJ02V0DS PS7113-1A,-2A,PS7113L-1A,-2A GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. ED 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. O NT IN U * Do not lick the product or in any way allow it to enter the mouth. DI SC Caution 0604 NOTICE 5. 6. 7. 8. 9. 10. 11. 12. D UE 4. IN 3. NT 2. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. SC O 1. NOTE 1: "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. DI CEL Headquarters * 4590 Patrick Henry Drive, Santa Clara, CA 95054 * Phone (408) 919-2500 * www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus