The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE
350 mA CONTINUOUS LOAD CURRENT
1-ch, 2-ch Optical Coupled MOS FET
Solid State Relay
OCMOS FET
PS7113-1A,-2A,PS7113L-1A,-2A
Document No. PN10269EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
−NEPOC Series−
DESCRIPTION
The PS7113-1A, -2A and PS7113L-1A, -2A are solid state relays containing GaAs LEDs on the light emitting side
(input side) and MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7113L-1A, -2A have a surface mount type lead.
FEATURES
• 1 channel type (1 a output) or 2 channel type (1 a + 1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6, 8-pin DIP)
• Low offset voltage
• Ordering number of taping product : PS7113L-1A-E3, E4: 1 000 pcs/reel
: PS7113L-2A-E3, E4: 1 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
<R>
DISCONTINUED
Data Sheet PN10269EJ02V0DS
2
PS7113-1A,-2A,PS7113L-1A,-2A
PACKAGE DIMENSIONS (in millimeters)
9.25±0.5
3.5±0.3
4.15±0.3
3.3±0.3
0.5±0.1 2.54
1.34±0.1
0.25 M
0 to 15˚
7.62
6.5±0.5
9.25±0.5
3.5±0.3
1.34±0.1
0.25 M 2.54
6.5±0.5
0.10+0.10
–0.05
0.9±0.25
9.60±0.4
9.25±0.5
3.5±0.3
4.15±0.3
3.3±0.3
0.5±0.1
2.54
1.34±0.1
0.25 M
0 to 15˚
7.62
6.5±0.5
9.25±0.5
3.5±0.3
1.34±0.1
0.25 M 2.54
6.5±0.5
0.10+0.10
–0.05
0.9±0.25
9.60±0.4
PS7113-1A PS7113L-1A
PS7113-2A PS7113L-2A
1. LED Anode
2. LED Cathode
3. NC
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
123
654
TOP VIEW
1. LED Anode
2. LED Cathode
3. NC
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
123
654
TOP VIEW
12 43
65
87
TOP VIEW
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
12 43
65
87
TOP VIEW
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
DISCONTINUED
Data Sheet PN10269EJ02V0DS 3
PS7113-1A,-2A,PS7113L-1A,-2A
MARKING EXAMPLE
No. 1 pin
Mark
PS7113-1A
NL601
Country Assembled
Type Number
Assembly Lot
601
Year Assembled
(Last 1 Digit)
LN
Rank Code
In-house Code
(L: Pb-Free)
Week Assembled
No. 1 pin
Mark
PS7113-2A
NL601
Country Assembled
Type Number
Assembly Lot
601
Year Assembled
(Last 1 Digit)
LN
Rank Code
In-house Code
(L: Pb-Free)
Week Assembled
PS7113-1A PS7113-2A
<R>
DISCONTINUED
Data Sheet PN10269EJ02V0DS
4
PS7113-1A,-2A,PS7113L-1A,-2A
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS7113-1A PS7113-1A-A Pb-Free Magazine case 50 pcs Standard products PS7113-1A
PS7113L-1A PS7113L-1A-A (UL, BSI, CSA
PS7113L-1A-E3 PS7113L-1A-E3-A Embossed Tape 1 000 pcs/reel approved)
PS7113L-1A-E4 PS7113L-1A-E4-A
PS7113-2A PS7113-2A-A Magazine case 50 pcs PS7113-2A
PS7113L-2A PS7113L-2A-A
PS7113L-2A-E3 PS7113L-2A-E3-A Embossed Tape 1 000 pcs/reel
PS7113L-2A-E4 PS7113L-2A-E4-A
*1 For the application of the Safety Standard, following part number should be used.
<R>
DISCONTINUED
Data Sheet PN10269EJ02V0DS 5
PS7113-1A,-2A,PS7113L-1A,-2A
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Ratings
Parameter Symbol
PS7113-1A,
PS7113L-1A PS7113-2A,
PS7113L-2A Unit
Diode Forward Current (DC) IF50 mA/ch
Reverse Voltage VR5.0 V
Power Dissipation PD50 mW/ch
Peak Forward Current *1 IFP 1 A/ch
MOS FET Break Down Voltage VL100 V
Continuous Connection A IL350 mA/ch
Load Current *2 Connection B 450 −
Connection C 700 −
Pulse Load Current *3
(AC/DC Connection) ILP 600 mA/ch
Power Dissipation PD560 375 mW/ch
Isolation Voltage *4 BV 1 500 Vr.m.s.
Total Power Dissipation PT610 850 mW
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −40 to +100 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 Conditions: IF ≥ 2 mA. T he following types of load connections are available.
Connection A V
L
(AC/DC)
16
25
4
3I
L
L
Connection B
Connection C
16
25
43
I
L
LV
L
(DC)
+
–
16
25
4
3
I
L
I
L
LV
L
(DC)
+
–
16
25
4
3I
L
LV
L
(DC)
+
–
I
L
+ I
L
*3 PW = 100 ms, 1 shot
*4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-3 shorted together, 4-6 shorted together. (PS7113-1A)
Pins 1-4 shorted together, 5-8 shorted together. (PS7113-2A)
DISCONTINUED
Data Sheet PN10269EJ02V0DS
6
PS7113-1A,-2A,PS7113L-1A,-2A
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter Symbol MIN. TYP. MAX. Unit
LED Operating Current IF2 10 20 mA
LED Off Voltage VF0 0.5 V
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V
Reverse Current IR VR = 5 V 5.0
µ
A
MOS FET Off-state Leakage
Current ILoff VD = 100 V 0.03 1.0
µ
A
Output Capacitance Cout VD = 0 V, f = 1 MHz 250 pF/ch
Coupled LED On-state Current IFon IL = 350 mA 2.0 mA
On-state Resistance Ron1 IF = 10 mA, IL = 10 mA 0.9 2.5 Ω
Ron2 IF = 10 mA, IL = 350 mA, t ≤ 10 ms
Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 1.3 3.0 ms
Turn-off Time *1, 2 toff PW ≥ 10 ms 0.06 0.2
Isolation Resistance RI-O VI-O = 1.0 kVDC 109Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 1.1 pF/ch
*1 Test Circuit for Switching Time
V
L
R
L
I
F
R
in
Pulse Input
Input monitor monitorV
O
t
on
t
off
10 %
90 %
0
V
O
= 5 V
50 %
Output
Input
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
<R>
DISCONTINUED
Data Sheet PN10269EJ02V0DS 7
PS7113-1A,-2A,PS7113L-1A,-2A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Maximum Forward Current IF (mA)
–25 0 25 50 75
85
100
100
80
60
40
0
20
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Maximum Load Current IL (mA)
–25 0 25 50 75
85
100
500
400
300
200
0
100
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Forward Voltage VF (V)
–25 0 25 50 75 100
1.6
1.4
1.2
1.0
0.8
IF = 50 mA
1 mA
5 mA
10 mA
20 mA
30 mA
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
Applied Voltage VD (V)
Output Capacitance Cout (pF)
20 40 60 80 120
100
250
200
150
100
0
50
–0.4 –0.2 0.2 0.40
400
200
–200
–400
IF = 10 mA
LOAD CURRENT vs. LOAD VOLTAGE
Load Voltage VL (V)
Load Current IL (mA)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
Applied Voltage VD (V)
Off-state Leakage Current ILoff (A)
120
100
80
4020
060
10–8
10–6
10–4
10–3
10–7
10–9
10–5
25 ˚C
TA = 85 ˚C
Remark The graphs indicate nominal characteristics.
DISCONTINUED
Data Sheet PN10269EJ02V0DS
8
PS7113-1A,-2A,PS7113L-1A,-2A
TURN-ON TIME vs. FORWARD CURRENT
Forward Current IF (mA)
Turn-on Time ton (ms)
515 20 25 40
35
10 30
30
25
20
15
10
5
0
VO = 5 V
TURN-OFF TIME vs. FORWARD CURRENT
Forward Current IF (mA)
Turn-off Time toff (ms)
515 20 25 40
35
10 30
0.30
0.25
0.20
0.15
0.10
0.05
0
Turn-off Time toff (ms)
Number (pcs)
TURN-OFF TIME DISTRIBUTION
0.02 0.10
0.04 0.08
30
20
15
10
0
5
25
Turn-on Time ton (ms)
Number (pcs)
TURN-ON TIME DISTRIBUTION
1.1 1.3 1.51.0 1.2 1.4 1.6
30
20
15
10
0
5
25
VO = 5 V
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Normalized On-state Resistance Ron
–25 0 25 50 75 100
3.0
2.5
2.0
1.0
0.0
0.5
1.5
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
IL = 10 mA
ON-STATE RESISTANCE DISTRIBUTION
On-state Resistance Ron (Ω)
Number (pcs)
0.8 0.9 1.0
30
20
15
10
0
5
25
n = 50 pcs,
IF = 10 mA,
IL = 10 mA
n = 50 pcs,
IF = 10 mA,
VO = 5 V
n = 50 pcs,
IF = 10 mA,
VO = 5 V
Remark The graphs indicate nominal characteristics.
DISCONTINUED
Data Sheet PN10269EJ02V0DS 9
PS7113-1A,-2A,PS7113L-1A,-2A
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
Ambient Temperature T
A
(˚C)
Normalized Turn-on Time t
on
–25 025 50 75 100
3.0
2.5
2.0
1.0
0.0
0.5
1.5
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
V
O
= 5 V
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
Ambient Temperature T
A
(˚C)
Normalized Turn-off Time t
off
–25 025 50 75 100
3.0
2.5
2.0
1.0
0.0
0.5
1.5
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
V
O
= 5 V
Remark The graphs indicate nominal characteristics.
DISCONTINUED
Data Sheet PN10269EJ02V0DS
10
PS7113-1A,-2A,PS7113L-1A,-2A
TAPING SPECIFICATIONS (in millimeters)
Tape Direction
PS7113L-1A-E3
PS7113L-2A-E3 PS7113L-1A-E4
PS7113L-2A-E4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.1
4.0±0.1
1.75±0.1
4.5 MAX.
10.4±0.1
12.0±0.1
1.5
+0.1
–0
7.5±0.1
10.3±0.1
16.0±0.3
4.0±0.1
0.3
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
330±2.0
100±1.0
2.0±0.5
13.0±0.2
R 1.0 21.0±0.8
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
DISCONTINUED
Data Sheet PN10269EJ02V0DS 11
PS7113-1A,-2A,PS7113L-1A,-2A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
220˚C
Package Surface Temperature T (˚C)
Time (s)
(heating)
to 10 s
to 60 s
260˚C MAX.
Recommended Temperature Profile of Infrared Reflow
120±30 s
(preheating)
180˚C
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
<R>
DISCONTINUED
Data Sheet PN10269EJ02V0DS
12
PS7113-1A,-2A,PS7113L-1A,-2A
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
<R>
DISCONTINUED
0604
PS7113-1A,-2A,PS7113L-1A,-2A
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
DISCONTINUED
NOTICE
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modication, copy
or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classied according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; ofce equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); trafc control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (articial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specied by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specied ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specic characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
re in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
re control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difcult, please evaluate the safety of the nal products or systems manufactured by you.
8. Please contact a California Eastern Laboratories sales ofce for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales ofce if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales ofces, representatives and distributors,
Please visit our website: www.cel.com/contactus
DISCONTINUED