08-2020, Rev. 0820
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
General Purpose Relays
Force Guided Relays
Force Guided Relay SR2M
Coil Data
Coil voltage range 5 to 110VDC
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
005 5 3.8 0.5 35.7 700
006 6 4.5 0.6 51 706
009 9 6.8 0.9 116 698
012 12 9 1.2 206 699
015 15 11.3 1.5 321 701
018 18 13.5 1.8 483 671
021 21 16 2.1 630 700
024 24 18 2.4 823 700
036 36 27 3.6 1851 700
040 40 30 4.0 2286 700
048 48 36 4.8 32911) 700
060 60 45 6 51421) 700
080 80 60 8 91431) 700
110 110 83 11 172851) 700
1) Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
n 2 pole relay with force guided contacts according to EN61810-3
(formerly EN50205)
n Reinforced insulation between poles
n Version P1 for use in sockets
Typical applications
Emergency shut-off, press control, machine control, elevator and escalator
control, safety relays
Approvals
VDE 116064, UL E214025, TUV 968/EZ 111, CCC 2020970303000150
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A + 1 form B contacts
(1 NO + 1 NC) or
2 form C contacts (2 CO)
According EN61810-3 only 1NO / 1NC (11-14 and 22-21 or 12-11 and
21-24) shall be used as force guided contacts.
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 6A
Contact material AgNi
Contact style single contact, force guided
1 form A + B, 1 NO + 1NC type A according to EN61810-3
2 form C, 2CO type B according to EN61810-3
Min. recommended contact load 5V/10mA
Initial contact resistance ≤100mΩ at 1A, 24VDC
≤20Ω at 10mA, 5VDC
Frequency of operation, with/without load 6/300min-1
Contact ratings
IEC61810-1
on 1 form A (NO) contact 6A, 250VAC, cosφ =1,70C 100x103
IEC60947-5-1
on 1 form A (NO) contact AC15 - 250V/3A
DC13 - 24V/3A
on the basis of DC13 - 24V/6A
under conditions specified in
product spec. 2158001
UL508
on 1 form A (NO) contact 6A, 250VAC, cosφ =1,70°C 100x103
R300 and B300
form A (NO) + form B (NC) 1A/24VDC gen. purpose, 70°C
100x103
Mechanical endurance 10x106 operations
F0188-D
Z
08-2020, Rev. 0820
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
Force Guided Relays
Force Guided Relay SR2M (Continued)
Insulation
Initial dielectric strength
between open contacts 1500Vrms
between contact and coil 4000Vrms
between adjacent contacts 3000Vrms
Clearance/creepage
between open contacts microdisconnection
between contact and coil ≥8/8mm
between adjacent contacts ≥5.5/5.5mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts reinforced
Other Data SR2M SR2M Plug-in
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 70°C
Category of environmental Protection
IEC 61 810 RTIII RTII
Weight 20g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s -
Packaging/unit tube/20 pcs.
For more detailed information see product specification 2158001
Accessories
For details see datasheet
Accessories Force Guided Relay SR2M plugin
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
2 form C, 2 CO contacts
1 form A + 1 form B contacts, 1 NO + 1 NC
S0163-CO
S0163-BJ
S0163_CU
S0163-CV
S0273-BB
SR2M
SR2M Plug-In
3.9mm
08-2020, Rev. 0820
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
SCHRACK
General Purpose Relays
Force Guided Relays
Force Guided Relay SR2M (Continued)
Product code structure Typical product code V23047 -A1 012 -A 5 11
Type
V23047 Relay with force guided contacts SR2M
Version
A1 standard P1 Plug-In
Coil
Coil code: please refer to coil versions table (e.g. 024=24VDC)
Contact set
A single contact
Contact material
5 AgNi
Contact configuration
01 2 form C contacts (2 CO)
11 1 form A + 1 form B contacts ( 1 NO + 1 NC)
Other types on request
Product code Version Cont. material Contact arrangement Coil Part number
V23047-A1005-A501 Standard AgNi 2 form C (CO) 5VDC 1393258-2
V23047-A1005-A511 wash tight 1 A + 1 B, (1 NO + 1 NC) 7-1415006-1
V23047-A1006-A501 2 form C (CO) 6VDC 3-1415011-1
V23047-A1006-A511 1 A + 1 B, (1 NO + 1 NC) 6-1415011-1
V23047-A1009-A501 2 form C (CO) 9VDC 1393258-3
V23047-A1009-A511 1 A + 1 B, (1 NO + 1 NC) 7-1415011-1
V23047-A1012-A501 2 form C (CO) 12VDC 1393258-4
V23047-A1012-A511 1 A + 1 B, (1 NO + 1 NC) 1393258-5
V23047-A1018-A501 2 form C (CO) 18VDC 1393258-8
V23047-A1018-A511 1 A + 1 B, (1 NO + 1 NC) 1393258-9
V23047-A1021-A501 2 form C (CO) 21VDC 1-1393258-1
V23047-A1021-A511 1 A + 1 B, (1 NO + 1 NC) 1-1393258-2
V23047-A1024-A501 2 form C (CO) 24VDC 1-1393258-5
V23047-A1024-A511 1 A + 1 B, (1 NO + 1 NC) 1-1393258-7
V23047-A1036-A501 2 form C (CO) 36VDC 2-1393258-0
V23047-A1036-A511 1 A + 1 B, (1 NO + 1 NC) 8-1415011-1
V23047-A1040-A501 2 form C (CO) 40VDC 2-1393258-1
V23047-A1040-A511 1 A + 1 B, (1 NO + 1 NC) 2-1393258-2
V23047-A1048-A501 2 form C (CO) 48VDC 3-1415006-1
V23047-A1048-A511 1 A + 1 B, (1 NO + 1 NC) 9-1415011-1
V23047-A1060-A511 60VDC 2-1393258-3
V23047-A1110-A501 2 form C (CO) 110VDC 1-1415012-1
V23047-A1110-A511 1 A + 1 B, (1 NO + 1 NC) 2-1415012-1
V23047-P1005-A501 Plug-in 2 form C (CO) 5VDC 7-1415543-4
V23047-P1009-A501 for socket use 9VDC 7-1415543-5
V23047-P1012-A501 12VDC 7-1415543-6
V23047-P1021-A501 21VDC 7-1415543-7
V23047-P1024-A501 24VDC 7-1415543-8
V23047-P1036-A501 36VDC 7-1415543-9
V23047-P1110-A501 110VDC 8-1415543-0