The Fujitsu SPF200-USB is an all-in-one USB device.
Simply connect it to your USB cable and you have a
working fingerprint sensor! The SPF200-USB is ideal for
integrating into devices where USB is the communication
interface such as computer peripherals and embedded
applications. Mount the SPF200-USB into your device
and you have a completed product without going through
the expense of board layout and debug.
Features
▲
Description
▲
•All-in-one Fingerprint module with USB connector.
•Easy to integrate with other devices
•Uses Fujitsu MBF200 Fingerprint Sensor
•Low Power
– 18 milliamps: Operating
– 500 microamps: Standby
•USB 1.1 compatible (to 13 FPS)
SPF200-USB Fingerprint Sensor
•256 x 300 Pixel Array (50 µm pixel pitch)
•500 DPI resolution
•8-bit grayscale (256 gray levels)
•On board A/D Converter
•Programmable gain control for image optimization
•12.8mm x 15mm image area
•UL Certified ESD & EMI (FCC-B & CE)
Users will no longer be required to remember and enter
cumbersome passwords or PIN codes. Fingerprint
authentication provides a reliable, quick and user friendly
alternative to passwords. The SPF200-USB fingerprint
sensor has the USB 1.1 controller logic built right into the
sensor, no external hardware is required. Merely plug the
sensor into the USB cable, the power and data communi-
cations is managed by the USB protocol.
(Front view) (Back view)
©2003 Fujitsu Microelectronics America, Inc.
All company and product names are trademarks or
registered trademarks of their respective owners.
Printed in the U.S.A. BMS-FS-20980-6/2003
FUJITSU MICROELECTRONICS AMERICA, INC.
Corporate Headquarters
1250 E. Arques Ave. Sunnyvale, CA 94088-3470
Tel: (800) 866-8608 Fax: (408) 737-5999
E-mail: inquiry@fma.fujitsu.com Web Site: http://www.fma.fujitsu.com
•Computer peripherals – improves security and
convenience
•Physical access systems – approval for entry
•Transportation systems – validation of operators,
drivers and inspectors
SPF200-USB Fingerprint Sensor
Applications
▲
Description (cont.)
▲
The Fujitsu SPF200-USB fingerprint sensor with Fujitsu
Matching Engine Software quickly captures the image of
the fingerprint, analyzes it and compares it to a previously
registered fingerprint template. The Fujitsu SPF200-USB
fingerprint sensor consists of a 256 column x 300 row
array of tiny metal electrodes. Each electrode acts as one
plate in a capacitor and the finger acts as the second plate
in a capacitor.
•Medical equipment – authorization of operator or
technician
•Kiosks and vending machines – confirmation of
person receiving the selection
•Point of Sale terminals – authentication of tellers
and cashiers
A passivation layer on the surface of the device forms a
tough outer shell, protecting the device from abrasion,
chemicals, moisture and other forms of damage.The
SPF200-USB is manufactured in standard CMOS
technology, a mature and cost effective manufacturing
method.
•Power: 5 volts DC (from USB)
•Operating Current: 18 milliamps
•Standby Current: 500 microamps
•Fingerprint Sensor: MBF200
Specifications
▲
•Operating Temperature: 0 to 60°C
•Storage Temperature: -65 to 150°C
•Resolution: 500 DPI, 8-bit grayscale
•ESD: FCC-B and CE (±10kv)
•EMI: FCC-B and CE certified
Isometic View Top View
28.00
12.80
15.00
7.60
Note: All dimensions in millimeter.
0.80
1.60
33.10
Side View
