High-Volume
High-Speed
Precision Printing
BradyPrinter i7100
Industrial Label Printer
BradyID.com/i7100
2
Heavy Duty Meets High Tech
Get the job done with the BradyPrinter i7100 label printer. No matter the
demands of your labeling jobs from higher volumes to precise printing and
more this reliable, heavy-duty and high-accuracy label printer gets it all done.
The i7100 offers unparalleled benets, including:
Material Choice. Print on the widest range of materials with confidence, including difficult-to-print materials, like
heat-shrink sleeves, thick cable tags, push button materials, high-temperature electronics labels and even
basic materials.
Precision Printing. With ultra-sharp, high-accuracy printing and center alignment, the i7100 prints reliably on
labels as small as 0.125 inches.
Workhorse Performance. Designed to print thousands of labels per day, every day, this printer features a
high-speed processor, solid cast frame, durable components and a variety of connectivity ports.
Ease of Operation. Adjust printer settings quickly and easily with an ultra-intuitive color touch screen. To make
material loading and adjustments easier, there are bright-green touchpoints inside the machine.
Speed to Label. With print speeds up to 11.8 inches per second, the i7100 prints labels in no time.
Additionally, the “peel” configured printer saves you time by automatically peeling labels from the liner.
BradyPrinter i7100
Industrial Printer
Page 2-6
Printer
Accessories
Page 6-7
Compatible Labels,
Tags & Ribbons
Page 8-9
Software for Label
Creation & Data
Integration
Page 10
Printer Technical
Specifications
Page 11
Global Technical
Support
Page 12
The complete BradyPrinter i7100 solution:
BradyID.com/i7100 • 1-888-272-3946 3
1 Bi-Fold Cover
Reduces footprint on your line or in your workspace by
23% compared to a 1-piece cover
2 Color Touch-Screen Control Panel
Ultra-intuitive, icon-based printer setting adjustments
3 Side USB Ports
For installing service key or memory stick
4 Anti-Static Brush
Dissipates electrostatics after printing
5 Interchangeable Media Plates
Tear bar ships on standard model, peel plate on peel
model. Optional rewind guide plate available for peel
model for internal rewinding
6 Center Aligned Material Path
Center alignment minimizes ribbon wrinkling and is
preferred for printing very small labels, continuous
materials and basic labels
7 Peripheral Accessory Connection Port
Cutters and peel sensors are easily attached with a
single screw to the connector port, behind the gray
cover plate
8 Interface Options
(Back of printer) USB, RS232, ethernet, SD card and I/O Interface
Connection. See page 5 for more details
9 Ribbon Holders
Axles have 3-part tightening action, ensuring secure ribbon core position
Label Roll Holder
Spring-mounted flanges ensure constant tension during material
feed, for improved print accuracy. For cores over 3" outside diameter,
use roll adapter 100 accessory (part #149132)
On-Board Hex Key Adjustment Tool
Used to install accessories and change rollers and plates, this part
ships with the printer
Internal Rewinder (Peel Model Only - Shown Above)
Printed labels or spent liner can be rewound internally with or
without a cardboard core
Rocker Arm and Media Guide Knob
Spring-loaded arm with ultra low-friction rollers dampens tension at
the start of print and improves print accuracy
Solid Metal Chassis
Made of cast aluminum that allows main internal components to
attach directly to it
11
10
12
13
14
1
2
3
4
5
6
7
9
8
11
10
12
13
14
4
Change Print Settings with Ease
Make changes quickly and easily on the BradyPrinter i7100 with the intuitive touch-screen control panel. Colorful
icons, buttons and sliders mean you can navigate between screens, make printer setting changes and understand
the printer status with ease.
High-Performance Technology
for High-Performance Printing
The high-performance, thin film precision print head in the i7100 is
optimized for printing everything from very small labels with very
small text – as small as 0.125 in. labels – to large labels with large
text. This technology enables the i7100 to print labels for tough
applications, including rating plates, high-temperature polyimide
materials, thick push button labels and other specialty materials.
Additionally, the print heads are automatically detected and
calibrated by the central processing unit with key data stored right
in the print head.
BradyID.com/i7100 • 1-888-272-3946 5
Reduce Print Head Wear with
Variable Roller Widths
To keep your printer running smoothly and to avoid unnecessary
costs, the BradyPrinter i7100 has rollers available in a variety of widths
that can be quickly changed out and replaced to improve print head
life. These rollers are designed to be used with materials that are
similar widths to help reduce wear on the print head.
Connect Any Way You Need To
To meet your unique workflow and data flow needs, the i7100
connects any way you need it to. This printer offers a variety of ports
and an optional I/O connection that allows your printer to be triggered
from a programmable controller, foot pedal, sensor or other basic
device. Connection options include:
1 SD Memory Card slot
2 2x USB host interface ports (for scanner, keyboard, memory stick, WLAN stick or
USB Bluetooth Adaptor)
3 2x USB host (at side of front control panel) for memory stick or service key
4 USB 2.0 High-Speed device port for PC connection
5 Ethernet 10/100 BASE-T port
6 RS232C Interface 1.200-230.400 Baud/8
7 I/O Interface Connection (standard on peel model, optional on non-peel model)
8 1x 9 pin periphery connection port (under front gray cover) for connecting cutters
and peel sensor
1
2
4
3
5
6
78
See specifications on page 11 for
connectivity/port detail.
6
BradyPrinter i7100 Printers and Accessories
Printers
All printers ship with two empty cardboard ribbon cores, power cable, USB cable, user manual (English),
LabelMark standard software and a CD for drivers and manuals.
Catalog # Description Details
149050
BradyPrinter i7100 Industrial Label
Printer, Center Aligned, Standard
Version 300 dpi
For printing on labels, tags and continuous media wound on rolls or fanfolded. Media is torn off with included tear
bar plate. Optional field installable auto cutters are available.
149056
BradyPrinter i7100 Industrial Label
Printer, Center Aligned, Standard
Version 600 dpi
Ideal for for printing smaller fonts and bar codes on labels, tags and continuous media wound on rolls or
fanfolded. Media is torn off with included tear bar plate. Optional field installable auto cutters are available.
149045
BradyPrinter i7100 Industrial Label
Printer, Center Aligned, Peel
Version 300 dpi
In addition to the capabilities of standard model, printed labels can also be partial peeled off liner with internal
rewind of empty liner using the included peel bar plate, or printed labels can be internally rewound with addition
of optional rewind guide plate. Ships with I/O interface accessory (#149077) installed standard.
149053
BradyPrinter i7100 Industrial Label
Printer, Center Aligned, Peel
Version 600 dpi
In addition to the capabilities of standard model, printed labels can also be partial peeled off liner with internal
rewind of empty liner using the included peel bar plate, or printed labels can be internally rewound with addition
of optional rewind guide plate. Ships with I/O interface accessory (#149077) installed standard.
Printer Rollers
Use the on-board hex key to change or replace rollers. Always use a ribbon that is slightly wider than the media
and roller width to prevent the roller from touching the bare print head surface. Clean rollers often using IPA
cleaning swabs (PCK-6). Replace rollers that show signs of abrasion or wear.
Catalog # Description Details
149043 Print Roller 120 mm
For media width up to 114 mm. Green synthetic rubber coating for high print accuracy (this roller ships standard with printer).
149054 Print Roller 80 mm For media width up to 80 mm. Green synthetic rubber coating for high print accuracy.
149055 Print Roller 50 mm For media width up to 50 mm. Green synthetic rubber coating for high print accuracy.
149048 Print Roller 25 mm For media width up to 25 mm. Green synthetic rubber coating for high print accuracy.
149044 Print Roller Silicone 120 mm For media width up to 114 mm. Black silicone rubber coating for less print head wear on basic label materials.
149051 Rewind Assist Roller Replacement lower roller on peel model printers only. Green synthetic rubber coating.
Cleaning and Maintenance Tools
To extend print head life, clean print heads and rollers frequently to minimize wear and maximize print sharpness.
Pre-soaked IPA printer cleaning swabs remove dust and adhesive buildup from sensors and other surfaces.
Catalog # Description Details
PCK-6 IPA Printer Cleaning Swabs Pre-soaked in IPA, lint-free synthetic cleaning swabs. Pkg of 50 individually wrapped swabs.
149208 Hex Key Tool (spare) Used to change rollers and install accessories (1 key ships standard with printer).
BradyID.com/i7100 • 1-888-272-3946 7
Auto Cutters
Two cutters are available to completely cut through material or perf-cut material for later separation by hand.
Cutters install easily to the front of the printer using the hex key tool to remove the front lower gray cover and then
screw the accessory onto the printer. Specialty materials vary in thickness and construction — always test your
material to compare cut performance to your requirements.
Other Accessories
Catalog # Description Details
149132 Roll Adapter
100 Use with label rolls with 4” (100mm) core diameter and/or rolls with outside diameters over 7” (180mm).
149077 I/O Interface Installable into back of printer via Brady Technical Support depot service. Allows printer to be controlled by remote
device such as a sensor, foot pedal or PLC. Standard on peel model printer, optional on non-peel model printer.
149073
I/O Interface
Connector
SUB-D 25 pin
Optional device plugs into I/O interface (#149077) that passes inputs thru to I/O interface but also allows connection
of a signal device (ex: a light) allowing outputs to be sent through the connection and to the light. Printer must have
I/O interface (#149077) installed.
149071
Label
Selection I/O
Box
Optional device plugs into I/O interface (#149077). From a master controller (such as a PLC) up to 32 different labels
can be selected from the memory card. The I/O box allows printer to detect simple PLC control processes with 4 in- and
outputs via abc programming. 2 I/O boxes can be connected. Printer must have I/O interface (#149077) installed.
149131 USB WLAN
Stick
For installation in rear USB ports on printer. 2.4 GHz 802.11b/g/n + 5 GHz 802.11/a/n/c in infrastructure mode with rod
antenna for extended reach.
149070 Antistatic
Brush (spare) Dissipates electrostatics after printing. Ships standard on printer.
Catalog # Description Details
149069 Auto Cutter
CU400 with Tray
Complete cut-through for paper labels, self-adhesive labels, some tag stocks and continuous pressed sleeves. Test for
suitability to your application. Tray holds approximately 50 labels of average thickness and max label height of 100 mm.
149078 Perf Cutter
PCU400
Perf-cut or complete cut-through of continuous materials such as pressed tubes for manual separation later. Test for
suitability to your application.
Peel and Present Sensors and Accessories
The BradyPrinter i7100 peel model printer ships with a peel plate installed instead of a tear bar plate, which allows
for partial-peel off of the label upon print. A manual button press advances to the next label and internally rewinds
the empty liner. Installation of the Present Sensor adds additional capability of auto-advancing without button press
to the next label after the peeled label is removed. To internally rewind printed labels, the optional user-installed
Rewind Guide Plate can be installed onto the standard peel model printer in place of the peel plate. See printer
specifications for roll size limitations for unprinted and rewound rolls. The I/O interface accessory (#149077) also
ships installed on the peel model printer.
Catalog # Description Details
149075 Present Sensor
PS900
When used with the standard peel plate installed, this movable sensor is ideal for small labels and special-shaped
labels. The sensor detects when the peeled label is removed and automatically prints and advances to peel next label
without manual button push. Installs using hex key tool. For use on peel model printer with center-aligned media only.
149135 Extended
Peel-off Plate
For peel of labels with strong adhesive or very thick liner that make removal more difficult. When used, labels can be
advanced only by way of print on-demand button on printer control panel (not for use with present sensor). Installs in
place of standard peel plate which ships installed in peel model printer.
149074 Rewind Guide
Plate
This plate guides printed labels at a safe angle back into printer for internal rewind without peeling. Installs in place of
standard peel plate which ships installed on peel model printer.
149207 Tear Bar Plate
Can be installed onto a peel model printer in place of the standard peel plate, if the peel printer needs to be used for
basic printing (not for peeling or internal rewinding). Also available as a spare tear bar plate for use on standard
non-peel model printer.
8
The Right Label Material from the Right Company
Nothing leaves Brady's doors without meeting the highest quality standards. Backed by more than 100 years of
identification experience, rigorous R&D testing and ISO9001 certified facilities, Brady manufactures materials you
can trust.
The BradyPrinter i7100 offers more than 100 label materials, more than 3,000 stock label parts and made-to-spec custom
materials and parts, allowing the i7100 to print nearly any label you can imagine. Take a look at the variety of materials
available for your printing needs:
Electrical & Automation Applications
Adhesive Wire
Label Wraps
General Purpose
Labels
Arc Flash Panel
Labels
Heat-Shrink Wire
Sleeves
Self-Laminating
Wire Markers
Inside Panel
Labels
Push Button / Engraved
Plate Alternative Labels
Cable Tags
Panel Rating Plate
Materials
Laboratory & Sample Tracking Applications
Tube & Vial Labels
Tissue Cassette
Labels &
Applicators
Slide Labels /
Solvent Resistant
Labels
Labels for Humidity,
Moisture, Water
Bath & Autoclave
Cryo Labels
General Lab
Equipment Labels
Removable Labels
for Glassware
Dish, Tray & Well
Plate Labels
BradyID.com/i7100 • 1-888-272-3946 9
Electronics & PC Board Applications
Polyimide Labels Polyester LabelsElectrostatic
Dissipative Labels
PC Board
Component Labels
Removable
Polyimide Labels
Product ID & Production Line Applications
Metallized Labels
& Rating Plates
Polyester Labels
for Product, QA
Testing
Product Labels Repositionable
Labels
Tag Stock
Tamper Evident &
Tamper Resistant
Labels
Vinyl Labels Destructible
Labels
Logistics, General Industrial & Asset ID Applications
Paper Labels Tamper Evident &
Tamper Resistant
Labels
Asset Tracking
Labels
Polyester Labels
Bin & Shelf Labels
Tote & Pallet
Labels
Repositionable
Labels
Tag Stock
10
Label Creation Done with Ease
Brady Workstation Label Creation Software
Brady Workstation revolutionizes label and sign creation and printing by offering
a variety of suites and apps that are simple and efficient to use. This software
enables you to choose and customize which tools you use to complete tasks.
Recommended Suites for i7100 users:
Product ID Suite – Includes 10 apps for all your product, rating plate and circuit board labeling needs
including custom label design, sequencing, templates, bar coding, read/write access control
and data importation.
Wire ID Suite – Includes 12 apps for all your wire and cable labeling formats, flip-flop text, sequencing,
multi-copy printing, templates, read/write access control and data importation.
Download Brady Workstation program for free:
For more information on Brady Workstation apps and suites go to Workstation.BradyID.com
CodeSoft
®
Labeling Software
Codesoft barcode software enables you to design and print custom labels for
product identification and tracking. This powerful enterprise-level solution is
designed for easy label design plus more extensive capabilities for integration
with third-party software applications.
CodeSoft
®
is a registered trademark of Teklynx.
LabelMark
6 Label Creation Software
Brady’s LabelMark Software is a robust CD-based software solution for label
design, data importation and printing labels for a variety of applications. Print
Partner companion software from Brady allows you to create and manage
print-only files across multiple print stations and sites, and our Data Automation
companion software allows you to integrate automated printing within your
workplace and third-party systems.
1. Download Brady Workstation at
Workstation.BradyID.com
2. Fill the workstation with the apps you
want and leave out the ones you don’t.
BradyID.com/i7100 • 1-888-272-3946 11
Printer Specications
* On Peel models only.
** User should test to the application. Small label print performance is affected by multiple
factors including print speed, quantity of print run, burn setting and the size/layout of
the printed elements.
*** To avoid damage to printhead, always be sure ribbon width at least covers the total
media with, and, use a roller width such that the roller is wider than the total media with
but narrower than the ribbons width. The end result is that no exposed print head rubs
against exposed roller.
**** Windows
®
is a registered trademark of Microsoft Corporation, Nomex
®
and Tedlar
®
are
registered trademarks of Dupont.
Model(s):
Model Name i7100 Industrial Printer
Media Alignment Center justified
User Interface:
Display Type Touchscreen color LCD
Display Size (diagonal) 4.3"
Display Resolution (H x W) 480 x 272 pixels
Display Languages
Arabic (Egypt), Bulgarian, Chinese (simplified), Croatian,
Czech, Danish, Dutch, English, Finnish, French,
German, Greek, Hungarian, Italian, Korean, Lithuanian,
Macedonian, Norwegian, Persian(Farsi), Polish,
Portuguese, Romanian, Russian, Serbian, Slovenian,
Spanish (Castilian), Spanish (Mexico Latin Amer),
Swedish, Thai, Turkish
Display Status Bar
Receiving data, record data stream, ribbon warning,
SD card presence, USB stick presence, bluetooth,
WLAN, ethernet, USB slave, time
Print Head / Printing Characteristics:
Print Resolution 300 dpi
600 dpi
Print Method Thermal transfer (300 or 600 dpi)
Direct thermal (300 dpi - material & printhead dependent)
Print Speed 11.8 in/sec max (300 dpi)
5.9 in/sec max (600 dpi)
Print Width (max, cross-web) 4.16"
Print Length (max, down-web) 6.6' (non-peel mode)
9.8" (peel mode)
Media Characteristics:
Media Width (cross-web
incl liner)
0.157" to 3.35" (continuous sleeves)
0.36" to 4.49" (other materials)
Label Width (cross-web) 0.158" to 4.33"
Label Length (down-web)**
0.125" minimum (w/no backfeed)
0.158" minimum (w/backfeed)
0.240" minimum (in peel mode)
Media Thickness
0.0024" to 0.029" (label materials)
0.070" max (B-593 push button material)
0.043" max (heat shrink sleeves)
Media Roll o.d. (max) 8.07"
Media Roll Core i.d. 1.5" to 3.94"
Media Roll Winding Outside or inside
Internal Rewind* Takeup Roll
o.d. (max)
5.6"
Internal Rewind* Takeup
Roll Core i.d. 1.5" to 1.58"
Internal Rewind* Takeup
Roll Winding Outside
Media Styles
Die cut media, continuous media, open core roll-fed
media, fanfolded media (external feed), tagstock
liner-mounted, tagstock linerless, perforated materials,
adhesive labels, heat-shrink sleeves (single sided and
double sided with re-insert), continuous tubing (partially
flattened), self-laminating cable labels, zip-tie cable tags
Media Material Types****
PE (polyethylene), PET (polyester), PET Metallized, PU
(polyurethane), PVC (vinyl), PVF (polyvinyl fluoride),
PVDF (polyvinylidene fluoride), PP (polypropylene), PI
(polyimide), Polyamide, Tedlar®, Nomex®, Polyether
Polyurethane (Heatex), Raised Panel Push Button
material, Paper, Destructible materials, Tamper-evident
and Tamper-resistant materials, other materials not listed
Media Parts Offering 3400+ stock parts and custom (made-to-spec) parts
Ribbon Characteristics:
Ribbon Length (max) 1000'
Ribbon Roll o.d. (max) 2.68"
Ribbon Roll Core i.d. 1.0"
Ribbon Width (cross-web)*** 1.0" to 4.5"
Ink Side Inside or outside wound
Electronics:
Processor 32 bit 800 MHz clock rate
Memory (RAM) 256 MB
Data Storage (IFFS) 50 MB
SD Card Slot (SDHC, SDXC) 512 GB max
Internal Battery
For internal date & time (RTC)
Data Storage When Power Off Ye s
Physical / Operational Characteristics:
Dimensions (closed) (HxWxD) 11.4" x 9.9" x 18.1"
Weight (empty) 22.05 lbs
Power Supply 100 - 240 VAC, 50/60 Hz, PFC
Power Consumption <10W standby / 150W typical / 300W max
Operating Environment 0 - 40°C / 10 - 85% RH non condensing
Storage Environment 0 - 60°C / 20 - 85% RH non condensing
Transport Environment -25 - 60°C / 20 - 85% RH non condensing
Agency Approvals
CE, FCC class A, cUL. Contact Brady for up-to-date list
of environmental compliance information and agency
approvals and/or marks covering over 75 countries
(awarded or applied for)
Fonts & Graphics:
Font Types (resident) 5 bitmap fonts - including OCR-A, OCR-B
3 vector fonts - Swiss 721, Swiss bold 721, Monospace 821
Font Types (storable to printer) TrueType fonts storable to printer via jump drive
Font Attributes
Bold, italic, underlined, outline, negative depending on font
Font Scaling (bitmap)
Width & height range: 0.039" to 0.12"
Zoom factor: settings 2 to 10
Rotation: 0°, 90°, 180°, 270°
Font Scaling (vector & truetype)
Width & height range: 0.35" to 5.04"
Zoom factor: Variable (dot-by-dot)
Rotation: 360° in steps of 1°
Character Sets
Windows 1250 up to 1257, DOS 437,737,755,85
0,852,857,862,864,866,869, EBC DIC 500, ISO
8859-1 to-10 and -13 to -16, Win OEM 720, UTF8,
Macintosh, Roman, DEC MCS, KO18-R, All West
and East European characters and Latin, Cyrillic,
Greek, Hebrew, Arabic, simplified Chinese, and Thai
characters are supported
Graphic Elements Arrows, lines, rectangles, circles, ellipses; filled and
filled with fading
Graphic Formats PCX, IMG, BMP, TIF, MAC, PNG
Barcodes:
Barcode Symbologies - Linear
Code 39, Code 39 Full ASCII, Code 93, Code 128 A, B,
C, Codabar, Deutsche Post (indent- and routing), EAN
8, 13, EAN/UCC 128/GS1-128, EAN/UPC Appdx 2 and
Appdx 5, FIM, HIBC, Interleaved 2/5, JAN 8, 13, MSI,
Plessey, Postnet, RSS 14, UPC A, E, E0
Barcode Symbologies - 2D
Aztec, DataMatrix, QR Code, PDF 417,
UPS MaxiCode, GS1 Databar, Codablock F, Micro
PDF 17, RSS 14 (truncated, limited, stacked, stacked
omni-dir), EAN/GS1 DataMatrix
Barcode Attributes Sizing: variable in height, modular width and ratio
Rotation: 0°, 90°, 180°, 270°
Interfaces & Connection:
USB 2.0 Hi-Speed Device Port For PC connect
1 x USB Host (front screen L) For service key or memory stick
1 x USB Host (front screen R) For USB WLAN stick w/no antenna
2 x USB Host (back panel) For scanner, keyboard, USB memory stick, USB
bluetooth adapter, USB WLAN stick w/antenna
1 x RS232-C
For serial cable connection.
1,200 - 230,400 baud/8 bit
1 x Ethernet 10/100 BASE-T
For networking, remote access, and firmware updates
1 x SD Slot
For memory card (SDHC, SDXC)
1 x USB Host 24 DC 9pin (front lower
panel)
For peripheral accessory connection only, auto cutter,
present sensor, etc
1 x Digital I/O - (back panel - optional)
Standard on peel model. For connecting basic trigger
device such as foot pedal. 8 inputs & 8 outputs.
- Compliant with IEC/EN 61131-2, type 1+3
- Inputs & outputs: galvanically isolated, rev polarity
protected, short circuit protected
- Outputs: short circuit protected
Software & Firmware:
Label Creation Software Brady Workstation (free download) & Workstation apps,
Brady LabelMark Software (v6.5.0.9 or higher)
WHQL Certified Windows® Drivers****
Windows 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012,
2012 R2, 2016
Printer Command Language Jscript - scripting commands for sending scripts to
the printer
Printer Compiler Language abc basic - for placing embedded logic programming
& prompts onto the printer
Printer Administration / Monitoring
Web-based remote access - allows printer control,
configuration, firmware updates, memory card admin
and time/date synchronization, and will send printer
status, and error messages to users
Open Source Software Go to www.BradyID.com/i7100compliance for a list of
open source software files used in this product
Options / Accessories:
Replacment Print Heads Factory installed via Brady tech repair
Replacement Print Rollers*** Variable widths to protect print head with narrow
supplies - field installable
Auto Cutter Full auto cutter and perf auto cutter available
Field-installable to front panel
Present Sensor For auto advance and print on peel model printer
Field installable to front of printer
I/O Interface Standard on peel model, optional for non-peel model.
Installed by Brady Tech Support.
USA
Customer Service: 1-888-272-3946
Inside Sales: 1-888-311-0775
BradyID.com
Canada
Customer Service: 1-800-263-6179
BradyCanada.ca
Mexico
Customer Service: 1-800-262-7777
Inside Sales: 1-800-262-7777 ext 177
BradyLatinAmerica.com
© 2017 Brady Worldwide Inc. ALL RIGHTS RESERVED
Application Engineering Services
If you need assistance with advanced integration of your i7100 into a complex
data flow scenario, the Application Engineering Team at Brady may be able to
help. This team specializes in customized, fee-based services that include:
Complex scenarios of integrating of printer, software and labels
Custom Programming
File Conversions
Template Creation
Scan-To-Print Mapping
Data Flow Integration from Database to Printer
Technical Support
Feel confident that your BradyPrinter i7100 is covered by Brady's 5-year benchtop printer
warranty. You'll benefit from our staff of support and repair technicians for troubleshooting
support, set-up assistance and how-to guidance and repair services, so you can get back to work.
Visit BradyID.com/Brady360 for full warranty coverage details.
Y4571584 MS4571584