Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 13 SAW/FBAR DEVICES (FILTER / DUPLEXERS) REFLOW ORDERING CODE APrevious Rule (applied to products registered on March 31, 2010 or before.) F A R - D 6 N F - 1 G 9 6 0 0 - P 1 B Z - Z Family Common sign - Fixation Package type Frequency Product type HIGH FREQUENCY PRODUCTS Series Product Frequency Range Duplexer 700-1000MHz Duplexer 1000-5000MHz Dual Duplexer 700-1000MHz Filter 700-1000MHz Filter 1000-5000MHz Dual Filter 700-1000MHz Dual Filter 1000-5000MHz D5 D6 J5 F5 F6 G5 G6 Common sign - Fixation Common sign - Fixation Serial Number Design Custom, Status Packing BNew Rule (applied to products registered on April 1, 2010 or later.) D 6 N F 1 G 9 6 0 P 1 B Z - Z D5 D6 J5 F5 F6 G5 G6 Series Product Frequency Range Duplexer 700-1000MHz Duplexer 1000-5000MHz Dual Duplexer 700-1000MHz Filter 700-1000MHz Filter 1000-5000MHz Dual Filter 700-1000MHz Dual Filter 1000-5000MHz Package type Frequency Design Serial Number Product type Packing Custom For further details, please contact to TAIYO YUDEN Co.,Ltd. EXTERNAL DIMENSIONS/STANDARD QUANTITY 2.5x2.0x0.6 8pin 2.5x2.0x0.6 9pin 0.6max 2.50.1 2.5x2.0x0.65 0.6max 2.50.1 2.00.1 2.00.1 index index 4-0.9625 2-0.3 0.9x0.375 4-0.7375 Unitmm 1.4x1.0x0.5 1.400.1 Unitmm 1.000.1 0.50 1.400.1 index 1.41 0.40 0.5 Unitmm 0.25 0.25 0.575 0.25 1.00 0.25 Unitmm 0.39 0.60 0.25 0.25 0.25 0.2 1.17 0.47 0.60 0.325 1.100.1 index 0.40 0.5max 1.500.1 0.5max 0.20 0.325 1.5x1.1x0.5 0.5max 0.900.1 0.25 Unitmm 8-0.30 1.8x1.4x0.5 index 0.50 Unitmm 8-0.425 1.800.1 1.100.1 index C0.15 8-0.30 1.1x0.9x0.5 0.5max 0.60x0.30 4-0.575 8-0.375 8-0.425 2-0.325 C0.15 8-0.375 8-0.425 4-0.775 0.9x0.375 4-0.7375 C0.15 8-0.375 1.60.1 index 4-0.9625 2-0.3 C0.15 4-0.7375 0.5max 2.00.1 2.00.1 index 4-0.9625 2.0x1.6x0.5 0.65max 2.50.1 0.24 0.23 0.39 0.78 0.25 0.49 0.18 0.18 Unitmm 0.18 0.21 0.21 Unitmm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 126 13 PART NUMBERS Duplexers Part number W-CDMA I2G FAR-D6JG-2G1400-D3FZ FAR-D6JH-2G1400-B1BT FAR-D5NG-881M50-M11Z FAR-D5PF-881M50-M3E7 FAR-D5NE-881M50-P1A9 FAR-D5NE-881M50-P1A6Q FAR-D5PE-881M50-P3EZ FAR-D5PE-881M50-P3EY D5NL881M5P1HY FAR-D5NH-942M50-M1Y9 FAR-D5NF-942M50-P1GZ FAR-D5NF-942M50-P1GWQ D5PF942M5M3G9 D5PE942M5P3GT FAR-D6NH-1G9600-M1Z9 FAR-D6NH-1G9600-M1Z6 D6HK1G960DK12 FAR-D6NF-1G9600-P1BT D6NF1G960P1BR D6HH1G960BH95 FAR-D6JH-2G1325-B1YZ D6JG2G132D3GZ D5NL782M0P1JZ FAR-D5NE-740M00-P1C9 D5NF878M0P1ET CDMA/W-CDMA V850 W-CDMA VIII900 PCS/W-CDMA II1.9G W-CDMA IVDCS/2G LTE XIII LTE XVII CDMA BC0+BC10 Package Size mm 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.6 2.0x1.6x0.5 2.5x2.0x0.6 2.5x2.0x0.6 2.0x1.6x0.5 2.0x1.6x0.5 3.0x2.5x0.7 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.0x1.6x0.5 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 3.0x2.5x0.7 2.5x2.0x0.6 2.5x2.0x0.65 Insertion Loss dB 1.4/1.7 1.4/1.7 1.45/1.8 1.5/1.8 1.6/1.8 1.6/1.7 1.4/1.7 1.4/1.7 1.6/2.6 1.8/2.3 1.9/2.3 1.9/2.3 1.9/2.2 1.7/2.2 2.2/3.1 2.3/2.7 2.0/2.3 2.5/2.8 2.5/3.4 2.3/2.5 1.5/1.7 1.6/1.9 1.9/2.2 1.7/2.0 1.9/2.5 IsolationdB Remarks 54/47 58/48 66/52 58/51 57/51 60/53 59/52 59/52 60/51 58/50 58/50 59/54 60/52 58/54 55/50 55/53 58/52 54/55 56/53 56/53 57/51 53/52 66/52 61/58 58/50 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, A Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, A Type Rx : Bal.100ohm SV-LTE Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm, GPS High Att. 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Low Rx IL 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm, Low Rx IL 9 Pin, B Type Rx : Bal.100ohm High GPS Att. & Rx Isol. 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm SV-LTE 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm CDMA/GSM850/Band System CDMA Tx CDMA/GSM850 Tx CDMA Rx GSM850/CDMA Rx GSM850 Rx Part number FAR-F5KB-836M50-B4ER FAR-F5KB-836M50-B4EG F5QA836M5M2AR FAR-F5KA-836M50-D4DF FAR-F5KB-881M50-B4ED FAR-F5KY-881M50-B4UZ FAR-F5KB-881M50-B4EJ F5QG881M5P2KG FAR-F5KA-881M50-D4DB FAR-F5QA-881M50-M2AF FAR-F5KB-881M50-B4EA FAR-F5QB-881M50-P2BA Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 1.7 1.6 1.9 1.9 1.5 1.5 1.4 1.5 1.7 1.6 1.7 1.3 Attenuation dB 44 42 45 44 61 61 64 56 56 46 53 63 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 1.4 2.1 Attenuation dB 20 53 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 2.2 2.6 2.3 2.4 2.0 2.0 1.6 1.6 1.9 2.2 Attenuation dB 16 38 18 29 57 34 26 28 53 56 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 2.5 2.1 1.5 1.8 Attenuation dB 30 20 14 15 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 2.4 2.3 3.4 3.4 2.1 2.8 2.0 1.6 Attenuation dB 35 28 44 43 23 50 18 18 Remarks 100ohm input 200ohm input High Att. High Att. 100ohm output 100ohm output, High Att. 200ohm output 100ohm output, High Att.,Low Loss High Att. - 150ohm output 150ohm output HIGH FREQUENCY PRODUCTS System CDMA2000 BC0+BC10 System Part number CDMA2000 BC0+10 Tx CDMA2000 BC0+10 Rx F5KA833M0D4MG F5KY878M0B4ND Remarks Low IL 100ohm output GSM/EGSM/Band System EGSM Tx EGSM Rx Part number FAR-F5KA-897M50-D4DC FAR-F5KA-897M50-D4VW F5QA879M5M2AC FAR-F5KB-942M50-B4ES FAR-F5KY-942M50-B4UW FAR-F5KA-942M50-D4DD FAR-F5KB-942M50-B4EB FAR-F5QB-942M50-P2BB F5KA942M5D4MYB F5QG942M5P2KB Remarks High Att. High Att. - 100ohm output 100ohm output, High Att. High Att. 150ohm output 150ohm output High Att. 100ohm output, High Att. DCS/Band System Part number DCS Tx FAR-F6KA-1G7475-D4CY FAR-F6KA-1G8425-D4CK FAR-F6KB-1G8425-B4GA F6QB1G842P2BM DCS Rx Remarks 150ohm output 100ohm output PCS/GSM1900/Band System US-PCS Tx US-PCS Rx GSM1900/US-PCS Rx GSM1900 Rx Part number FAR-F6KA-1G8800-L4AF FAR-F6KB-1G8800-B4GS FAR-F6KA-1G9600-D4DQ FAR-F6KA-1G9600-D4MT FAR-F6KB-1G9600-B4GP F6KY1G960B4NF FAR-F6KA-1G9600-D4CR FAR-F6KB-1G9600-B4GB Remarks High Att. 100ohm input High Att. High Att. 100ohm output 100ohm output 150ohm output This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 127 PART NUMBERS GSM Dual FAR-G6KZ-1G8425-Y4WZ FAR-G6KZ-1G8425-Y4WY FAR-G5QC-942M50-N2FB Package Size mm 1.8x1.4x0.5 1.8x1.4x0.5 1.5x1.1x0.5 FAR-G5KT-942M50-Y4RW 1.8x1.4x0.5 1.9/2.2 50/25 GSM850 150ohm output EGSM 150ohm output FAR-G5KW-942M50-Y4YD 1.8x1.4x0.5 2.5/1.8 32/38 EGSM 150ohm output GSM850 150ohm output FAR-G5KC-942M50-Y4YW FAR-G5QC-942M50-N2CD FAR-G5KT-942M50-Y4RZ FAR-G5QD-942M50-N2DB FAR-G6QC-1G9600-N2FA G6QJ1G960M2MB 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8/1.4 1.7/1.4 2.2/1.9 2.5/2.0 1.9/1.7 1.9/1.9 31/54 29/51 25/52 25/55 17/13 19/19 EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output DCS 150ohm output GSM1900 150ohm output Rx Dual Unbal DCS+GSM1900 Rx (Common Input) FAR-G6KT-1G9600-Y4RU 1.8x1.4x0.5 1.9/1.8 13/18 GSM1900 150ohm output DCS 150ohm output GSM1900DCS Rx FAR-G6KC-1G9600-Y4YY G6QC1G960N2CH 1.8x1.4x0.5 1.5x1.1x0.5 1.9/1.6 1.6/1.2 14/16 13/15 GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900DCS Rx Common Input FAR-G6KT-1G9600-Y4RY 1.8x1.4x0.5 1.9/1.8 13/18 GSM1900 150ohm output DCS 150ohm output FAR-G6KW-1G9600-Y4YC G6QE1G960N2EC G6QE1G960N2EE G6QF1G960N2GA 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.5x1.1x0.5 2.2/3.1 2.5/2.5 2.2/2.2 1.6/1.4 13/15 18/13 31/14 14/54 GSM1900 170ohm output DCS 170ohm output GSM1900 150ohm output DCS 150ohm output GSM1900/DCS 150ohm output Low Loss GSM1900 150ohm output GSM850 150ohm output System EGSMDCS Rx DCSEGSM Rx GSM850EGSM Rx GSM850EGSM Rx Common Input GSM850+EGSM Rx (Common Output) EGSMGSM850 Rx EGSMGSM850 Rx Common Input DCSGSM1900 Rx GSM1900DCS Rx Common Output HIGH FREQUENCY PRODUCTS GSM1900850 Rx Part number Insertion Loss dB 1.8/1.6 1.6/1.8 1.5/1.8 Attenuation dB 31/16 16/31 50/29 Remarks EGSM 150ohm output DCS 150ohm output DCS 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GPS System GPS GPS/GNSS Part number FAR-F6KA-1G5754-L4AA FAR-F6KA-1G5754-L4AJ FAR-F6KA-1G5754-L4AB FAR-F6QA-1G5754-H2JD FAR-F6QA-1G5754-H2JE F6QA1G575H2JF FAR-F6KB-1G5754-B4GE FAR-F6KB-1G5754-B4GU FAR-F6KA-1G5859-D4MS FAR-F6KB-1G5859-B4HR Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 0.9 0.9 0.44 0.87 1.27 0.96 1.1 1.2 1.0/1.2 1.1/1.4 Attenuation dB - - - - - - - - - - Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 Insertion Loss dB 1.6 2.1 1.8 1.9 1.9 1.7 1.8 1.7 1.9/3.0 1.6/1.5 1.6/20 Attenuation dB 38 34 38 39 48 39 64 55 48/41 42/64 56/50 Remarks Low loss Low loss, High Att. Ultra Low loss Low loss High Att. Low loss, High Att. 100ohm output, Low loss 100ohm output, High Att. - 100ohm output W-CDMA System W-CDMA I2GTx W-CDMA I2GRx W-CDMA2G I +II 1900Rx W-CDMA I (2G)+V (850) Rx W-CDMA V (850)+VIII (900) Rx W-CDMA VIII + V Rx (Common Output) J-CDMA2G/B.W.20MHzRx W-CDMA IV1.7G/2GTx W-CDMA VII Tx W-CDMA/LTE VII Rx W-CDMA IX1.7GTx W-CDMA IX1.7GRx LTE XIII Tx LTE XIII Rx LTE XVII Tx LTE XVII Rx LTE XX TD LTE 38 Rx TD LTE 40 Rx Part number FAR-F6KA-1G9500-D4DG FAR-F6KB-1G9500-B4GJ F6QA1G950M2AA FAR-F6KA-2G1400-D4CG FAR-F6KA-2G1400-D4DW FAR-F6KB-2G1400-B4GC FAR-F6KY-2G1400-B4UY F6QG2G140P2KA G6QL2G140M2PA FAR-G6KG-2G1400-Y4SH G5QH942M5N2LN Remarks Low loss, High Att. 100ohm input Low loss, High Att. High Att. 100ohm output 100ohm output, High Att. 100ohm output, High Att. I (2G) 200ohm output V (850) 200ohm output 100ohm output G5QT942M5N2VA 1.5x1.1x0.5 2.3/2.0 48/48 100ohm output FAR-F6KB-2G1200-B4GQ FAR-F6KA-1G7400-D4DE F6KA2G535L4AM FAR-F6KY-2G6550-B4UN FAR-F6KA-1G7675-D4CT FAR-F6KB-1G8625-B4GT FAR-F5KA-782M00-D4VP FAR-F5KY-751M00-B4UQ FAR-F5KA-710M00-D4VQ FAR-F5KY-740M00-B4UR F5KA847M0D4ML F6KB2G595B4HS F6KB2G350B4HT 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4 1.5 1.6 2.8 1.8 2.1 1.5 1.6 1.2 1.4 1.7 2.6 2.7 48 44 30 54 31 40 55 50 32 60 52 - - 100ohm output 100ohm output. High Att. 100ohm output 100ohm output 100ohm output 150ohm output 150ohm output Other System Part number ISM900B.W.26MHz FAR-F5QA-915M00-M2AK FAR-F6KA-2G0175-D4DR FAR-F6KA-1G9000-D4DS G6QJ2G017M2MD G6QJ2G017M2RD FAR-F6KA-2G4418-D4CU FAR-F6KA-2G4418-A4VA FAR-F6KA-2G4500-A4VD F6KA2G436A4VE F6KA2G466A4VJ TD-SCDMA/TD-LTE34 TD-SCDMA+34(2G)+39(1.9G) Wireless LAN Package Size mm 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 1.8 1.8 1.6 1.3/1.4 1.6/2.0 2.6 3.0 1.9 2.5 2.8 Attenuation dB - - - - - - - - - - Remarks High Att 2 IN/2 OUT 1 IN/2 OUT 10dBm 23dBm Low IL,+19dBm BW=72MHz,+24dBm BW=68MHz,+24dBm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 128 13 SAW/FBAR DEVICES (FILTER / DUPLEXERS) PACKAGING Minimum Quantity Type Duplexer Single Filter Dual Filter Sizemm 3.0x2.5 2.5x2.0 2.0x1.6 2.0x1.6 1.4x1.0 1.1x0.9 2.0x1.6 1.8x1.4 1.5x1.1 Z Z Z Z Z 3000 3000 3000 3000 3000 Z Z 3000 3000 Code & QuantityPieces U U J 5000 J 5000 10000 10000 Y Y Y Y Y Y Y 15000 15000 15000 15000 15000 15000 15000 Tape material Taping dimensions Type Duplexer Single Filter Dual Filter Sizemm 3.0x2.5 2.5x2.0 2.0x1.6 2.0x1.6 1.4x1.0 1.1x0.9 2.0x1.6 1.8x1.4 1.5x1.1 a 3.40.1 2.80.1 2.40.1 2.40.1 1.70.1 1.30.1 2.40.1 2.20.1 1.80.1 b 2.850.1 2.30.1 2.00.1 2.00.1 1.30.1 1.10.1 2.0 1.8 1.4 c 1.050.5 1.5+0.1/0 1.050.05 1.050.05 0.50.05 0.50.05 1.050.05 0.50.05 0.50.05 d 1.550.05 1.5+0.1/0 1.5+0.1/0 1.5+0.1/0 1.5+0.1/0 1.550.05 1.5+0.1/0 1.550.05 1.5+0.1/0 e 1.00.1 1.0+0.1/0.0 0.900.05 0.900.05 0.630.05 0.630.05 0.900.05 0.80.1 0.70.1 f 0.250.05 0.250.05 0.250.05 0.250.05 0.200.05 0.200.05 0.250.05 0.300.05 0.250.05 Unitmm Material of TapeConductive Tape : Polystyrene Top cover tape : Polyethylene terephthalatePETand Polyethylene Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-01 Reel size Material of Reel Material : PolystyreneCarbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistancereference value :109/sq Max. Code Quantity A Z 3,000 pcs 180.0 +0.0/1.5 J 5,000 pcs 180.0 +0.0/1.5 U 10,000 pcs 330.0 2.0 Y 15,000 pcs 330.0 2.0 B 66.0 0.5 66.0 0.5 100.0 1.0 100.0 1.0 C 13.0 0.2 13.0 0.2 13.0 0.2 13.0 0.2 W1 9.0 +1.0/0.0 9.0 +1.0/0.0 9.4 1.0 9.4 1.0 W2 11.4 1.0 11.4 1.0 13.4 1.0 13.4 1.0 Unitmm Reel label and Reel C-Label sticking and Winding method Surface This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-01 Filter RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bending Test. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-01 10. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 11. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 12. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-01 Duplexer RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 51 sec. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-01 10. High Temperature Bias Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 50, 29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-01