Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 2113501015 Item: KSK-1A35-1015 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Contact - No. Contact-form Contact-material Contact rating Switching voltage (> 9 AT) Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (10-30 AT) Operate time incl. bounce Release time Capacity Contact dimensions Overall length Glass body length Min Shock Vibration Operating temperature Storage temperature Soldering temperature Typ Max Unit 35 A - NO Ruthenium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ ! !$ Start Value % $ & ! % Start Value RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ' + Conditions Min Tolerance 0,5 / or according to drawi Tolerance 0,3 / or according to drawi Environmental data Unit KMS-02 Conditions Contact data 35 Max Conditions Typ )* Max Unit Max Unit +" Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz ." . wave soldering max. 5 sec. + + / , , - Modifications in the sense of technical progress are reserved Designed at: 22.05.03 Designed by: SCHELLHORN Approval at: 04.11.08 Approval by: RKAMP Last Change at: 30.04.09 Last Change by: AKELLER Approval at: 12.05.09 Approval by: RKAMP Version: 3