Revision: November 15, 2011, 15:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
1
Axial Leaded – 15000W > 15KPA series
15KPA Series
Please refer to http://www.Littelfuse.com/series/15KPA.html for current information.
AGENCY AGENCY FILE NUMBER
E128662/E230531
15KPA Series
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Applications
Features
The 15KPA Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Description
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
PPPM 15000 W
Steady State Power Dissipation on
inifinite heat sink at TL=75ºC (Fig. 5) PD8.0 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
IFSM 400 A
Operating Junction and Storage
Temperature Range TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction
to Lead RuJL 8.0 °C/W
Typical Thermal Resistance Junction
to Ambient RuJA 40 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Approvals
• Halogen-Free
RoHS compliant
Typical maximum
temperature coefficient
ΔVBR = 0.1% x VBR@25°C x ΔT
Glass passivated chip
junction in P600 package
15000W peak pulse
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
Excellent clamping
capability
Low incremental surge
resistance
Typical IR less than 2μA
above 36V
High temperature
soldering guaranteed:
260°C/40 seconds / 0.375”,
(9.5mm) lead length, 5
lbs., (2.3kg) tension
Plastic package has
Underwriters Laboratory
Flammability classification
94V-O
Matte Tin Lead–free plated
15KPA Series
RoHS
Pb
Revision: November 15, 2011, 15:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
2
Axial Leaded – 15000W > 15KPA series
15KPA Series
Please refer to http://www.Littelfuse.com/series/15KPA.html for current information.
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
(mA)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR
(µ A)
Maximum
Clamping
Voltage
VC @ IPP
(V)
Agency
Approval
MIN MAX
15KPA17A 15KPA17CA 17 18.99 20.79 50 515.4 5000 29.3 X
15KPA18A 15KPA18CA 18 20.11 22.01 50 488.7 5000 30.9 X
15KPA20A 15KPA20CA 20 22.34 24.46 20 440.2 1500 34.3 X
15KPA22A 15KPA22CA 22 24.57 26.91 10 407.0 500 37.1 X
15KPA24A 15KPA24CA 24 26.81 29.35 5 371.0 150 40.7 X
15KPA26A 15KPA26CA 26 29.04 31.80 5 343.2 50 44.0 X
15KPA28A 15KPA28CA 28 31.28 34.24 5 317.9 25 47.5 X
15KPA30A 15KPA30CA 30 33.51 36.7 5 297.8 15 50.7 X
15KPA33A 15KPA33CA 33 36.9 40.4 5 276.1 2 54.7 X
15KPA36A 15KPA36CA 36 40.2 44.0 5 252.5 2 59.8 X
15KPA40A 15KPA40CA 40 44.7 48.9 5 229.5 2 65.8 X
15KPA43A 15KPA43CA 43 48.0 52.6 5 216.3 2 69.8 X
15KPA45A 15KPA45CA 45 50.3 55.0 5 207.4 2 72.8 X
15KPA48A 15KPA48CA 48 53.6 58.7 5 194.3 2 77.7 X
15KPA51A 15KPA51CA 51 57.0 62.4 5 182.1 2 82.9 X
15KPA54A 15KPA54CA 54 60.3 66.0 5 172.2 2 87.7 X
15KPA58A 15KPA58CA 58 64.8 70.9 5 161.0 2 93.8 X
15KPA60A 15KPA60CA 60 67.0 73.4 5 155.0 2 97.4 X
15KPA64A 15KPA64CA 64 71.5 78.3 5 144.9 2 104.2 X
15KPA70A 15KPA70CA 70 78.2 85.6 5 132.9 2 113.6 X
15KPA75A 15KPA75CA 75 83.8 91.7 5 123.8 2 122.0 X
15KPA78A 15KPA78CA 78 87.1 95.4 5 119.7 2 126.1 X
15KPA85A 15KPA85CA 85 94.9 104.0 5 109.7 2 137.6 X
15KPA90A 15KPA90CA 90 100.5 110.1 5 103.7 2 145.6 X
15KPA100A 15KPA100CA 100 111. 7 122.3 5 93.6 2 161.3 X
15KPA110A 15KPA110CA 110 122.9 134.5 5 84.5 2 178.6 X
15KPA120A 15KPA120CA 120 134.0 146.8 5 78.5 2 192.3 X
15KPA130A 15KPA130CA 130 145.2 159.0 5 72.5 2 208.3 X
15KPA150A 15KPA150CA 150 167.6 183.5 5 62.4 2 241.9 X
15KPA160A 15KPA160CA 160 178.7 195.7 5 58.4 2 258.6 X
15KPA170A 15KPA170CA 170 189.9 207.9 5 55.4 2 272.7 X
15KPA180A 15KPA180CA 180 201.1 220.1 5 52.3 2 288.5 X
15KPA200A 15KPA200CA 200 223.4 244.6 5 47.3 2 319.1 X
15KPA220A 15KPA220CA 220 245.7 269.1 5 42.4 2 356.0 X
15KPA240A 15KPA240CA 240 268.1 293.5 5 39.3 2 384.6 X
15KPA260A 15KPA260CA 260 290.4 318.0 5 36.2 2 416.7 X
15KPA280A 15KPA280CA 280 312.8 342.4 5 33.2 2 454.5 X
For bidirectional type having VR of 30 volts and less, the IR limit is double.
For parts without A, the VBR is +10% and Vc is 5% higher than with A parts
Revision: November 15, 2011, 15:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
3
Axial Leaded – 15000W > 15KPA series
15KPA Series
Please refer to http://www.Littelfuse.com/series/15KPA.html for current information.
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
1
10
100
1000
0.0000010.00001 0.0001 0.001
td-Pulse Width (sec.)
PPPM-Peak Pulse Power (kW)
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
0
20
40
60
80
100
0255075100 125150 175200
TA-Ambient temperature (ºC)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
1
100
10000
0.0 50.0 100.0 150.0 200.0 250.0 300.0 350.0
VBR - Reverse Breakdown Voltage (V)
Cj (pf)
Tj=25C
f=1.0MHz
Vsig=50mVp-p
Bi-directional @ VR
Uni-directional @ VR
Bi-directional V=0V
Uni-directional V=0V
0
1
2
3
4
5
6
7
8
9
0255075100 125150 175200
Steady State Power Dissipation (W)
TL- Lead Temperature(ºC)
L = 0.375” (9.5mm)
Lead Lengths
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
Figure 3 - Test Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Derating Curve
0
50
100
150
200
250
300
350
400
450
11
0100
Number of Cycles at 60 Hz
I
FSM
, Peak Forward Surge Current (A)
Figure 6 - Maximum Non-Repetitive Forward Surge
Current
Revision: November 15, 2011, 15:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
4
Axial Leaded – 15000W > 15KPA series
15KPA Series
Please refer to http://www.Littelfuse.com/series/15KPA.html for current information.
Physical Specifications
Weight 0.07oz., 2.5g
Case P600 molded plastic body over
passivated junction.
Polarity Color band denotes the cathode except
Bipolar.
Terminal Matte Tin axial leads, solderable per
JESD22-B102D.
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
C 0.048 0.052 1.22 1.32
D 0.340 0.360 8.60 9.10
C
BA
A
D
P600
Environmental Specifications
Temperature Cycle JESD22-A104
Pressure Cooker JESD 22-A102
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Thermal Shock JESD22-A106
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Flow/Wave Soldering (Solder Dipping)
Peak Temperature : 265OC
Dipping Time : 10 seconds
Soldering : 1 time
Revision: November 15, 2011, 15:54
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Transient Voltage Suppression Diodes
5
Axial Leaded – 15000W > 15KPA series
15KPA Series
Please refer to http://www.Littelfuse.com/series/15KPA.html for current information.
Part Numbering System
Packing Options
Part Number Component
Package Quantity Packaging
Option Packaging Specification
15KPAxxxXX P600 800 Tape & Reel EIA STD RS-296E
15KPAxxxXX-B P600 100 Bulk Littelfuse Concord Packing Spec. DM-0016
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
SERIES CODE
15KPA xxx XX X
Part Marking System
F
15KPAXXX
Product Type
Littelfuse Logo
Cathode Band
Trace Code Marking
YYWW
Tape and Reel Specification
Direction of Feed
2.062
2.56
0.40
2.75
0.048
(76.2)
0.68
13.0
Recess Depth Max. 0.75 (19.05)
Off Center
either side
0.039(1.0)
Dimensions are in
inches/mm
Top View
Front View
Label
0.25
(65.00)
(10.16)
(52.37)
(6.35)
(1.22)
(69.85)
330.2
3.0
(17.27)
Negative Cathod
Lead Red Type
Anode Lead White Type