MIC www.vishay.com Vishay Electro-Films Thin Film Microwave Resistor FEATURES * * * * * * * * * * * Product may not be to scale The MIC resistor chips on alumina are designed with low shunt capacitance. Most lower value resistor geometrics are compatible with strip lines, making them ideally suited for microwave circuits. Wire bondable High frequency Small single chip size: 0.020" x 0.040" Case: 0402 Microwave resistance range: 20 to 500 Overall resistance range: 2 to 20 k Alumina substrate Low stray capacitance: < 0.2 pF Resistor material: Tantalum nitride, self passivating Moisture resistant Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Vishay EFI MIC chip resistors provide excellent high-frequency response and are ideally suited for prototyping. Typical application areas are: * Amplifiers * Oscillators * Attenuators * Couplers * Filters These chips are manufactured using Vishay Electro-Films (EFI) sophisticated Thin Film equipment and manufacturing technology. The MICs are 100 % electrically tested and visually inspected to MIL-STD-883. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER Resistance Range Tolerances TCR VALUE 2 to 20K 1 25, 50, 100, 200 UNIT % ppm/C Note * Only 20 to 500 are standard strip line designs for microwave applications Tightest Tolerance Available 1.0 % 25 ppm/C 50 ppm/C 100 ppm/C 200 ppm/C 2 10 20 5 k 10 k 15 k 20 k STANDARD ELECTRICAL SPECIFICATIONS PARAMETER Noise, MIL-STD-202, Method 308 Moisture Resistance, MIL-STD-202, Method 106 Stability, 1000 h, +125 C, 62 mW Operating Temperature Range Thermal Shock, MIL-STD-202, Method 107, Test Condition F High Temperature Exposure +150 C, 1000 h Dielectric Voltage Breakdown Insulation Resistance Operating Voltage DC Power Rating at +70 C (Derated to Zero at 150 C) 5x Rated Power Short-Time Overload, +25 C, 5 s Revision: 01-Mar-17 VALUE -20 typ. 0.1 max. R/R 0.2 max. R/R -55 to +125 0.1 max. R/R 0.2 max. R/R 400 1012 min. 100 max. 0.125 max. 0.1 max. R/R UNIT dB % % C % % V V W % Document Number: 61037 1 For technical questions, contact: efi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIC www.vishay.com Vishay Electro-Films DIMENSIONS in inches 0.020 0.020 0.020 0.040 0.040 0.040 0.010 0.010 0.010 0.012 0.012 0.012 TYPICAL RANGE 2 to 6 TYPICAL RANGE 6.2 to 19 TYPICAL RANGE 20 to 20 k IMPEDANCE VS. FREQUENCY 50 , 20 mil x 40 mil SIZE SCHEMATIC 50.40 50.30 IMPEDANCE () 50.20 50.10 50.00 49.90 49.80 49.70 49.60 0.00 E + 00 5.00 E + 08 1.00 E + 09 1.50 E + 0.9 2.00 E + 09 2.50 E + 09 3.00 E + 09 3.50 E + 09 FREQUENCY (Hz) MECHANICAL SPECIFICATIONS PARAMETER Chip Size 0.020" x 0.040" 0.003" (0.5 mm x 1.0 mm 0.076 mm) Chip Thickness 0.010" 0.002" (0.254 mm 0.05 mm) Chip Substrate Material 99.6 % alumina, 2 " to 4 " finish Resistor Material Tantalum nitride, self-passivating Bonding Pad Size 0.010" x 0.012" (0.254 mm x 0.30 mm) min. Number of Pads 2 Pad Material 25 kA minimum gold standard Backing None Tape and Reel Orientation Pattern side down GLOBAL PART NUMBER INFORMATION Global Part Number: MIC5000BKKMSNHWS Global Part Number Description: MIC 50 10 %, 100 ppm/C, MIC trim, SnPb termination, no back metal, class H, WS M I C 5 0 0 TOL. CODE (%) MODEL RESISTANCE RESISTANCE MULTILPLIER CODE MIC First 4 digits are significant figures of resistance C = 0.001 B = 0.01 A = 0.1 0=1 1 = 10 20 x 40 size microwave resistor TaN on alumina Revision: 01-Mar-17 0 TCR (ppm/C) B K TRIM STYLE F = 1.0 E = 25 M = microwave G = 2.0 C = 50 S = standard H = 2.5 K = 100 J = 5.0 L = 200 K = 10 R = 0/- 250 M = 20 K M TERMINATION G = Au S = SnPb A = Al T = lead (Pb)-free (e1) S N BACK METAL H VISUAL CLASS G = Au H = class H N = none K = class K W S PACKAGING CODE WS = waffle pack 100 min, 1 mult TS = tape and reel 100 min, 1 mult TF = tape and reel 5000 min, 1 mult Document Number: 61037 2 For technical questions, contact: efi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MIC1000AHKSGNHWS MIC5000BKRSGNHWS MIC1000AFLMGNHWS MIC5000AFLMGNHWS