MIC
www.vishay.com Vishay Electro-Films
Revision: 01-Mar-17 1Document Number: 61037
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thin Film Microwave Resistor
Product may not be to scale
The MIC resistor chips on alumina are designed with low
shunt capacitance. Most lower value resistor geometrics are
compatible with strip lines, making them ideally suited for
microwave circuits.
These chips are manufactured using Vishay Electro-Films
(EFI) sophisticated Thin Film equipment and manufacturing
technology. The MICs are 100 % electrically tested and
visually inspected to MIL-STD-883.
FEATURES
• Wire bondable
• High frequency
• Small single chip size: 0.020" x 0.040"
• Case: 0402
• Microwave resistance range: 20 to 500
• Overall resistance range: 2 to 20 k
• Alumina substrate
• Low stray capacitance: < 0.2 pF
• Resistor material: Tantalum nitride, self passivating
• Moisture resistant
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI MIC chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
Typical application areas are:
•Amplifiers
• Oscillators
• Attenuators
•Couplers
•Filters
Note
• Only 20 to 500 are standard strip line designs for microwave applications
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER VALUE UNIT
Resistance Range 2 to 20K
Tolerances ± 1 %
TCR ± 25, ± 50, ± 100, ± 200 ppm/°C
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER VALUE UNIT
Noise, MIL-STD-202, Method 308 -20 typ. dB
Moisture Resistance, MIL-STD-202, Method 106 ± 0.1 max. R/R%
Stability, 1000 h, +125 °C, 62 mW ± 0.2 max. R/R%
Operating Temperature Range -55 to +125 °C
Thermal Shock, MIL-STD-202, Method 107, Test Condition F ± 0.1 max. R/R%
High Temperature Exposure +150 °C, 1000 h ± 0.2 max. R/R%
Dielectric Voltage Breakdown 400 V
Insulation Resistance 1012 min.
Operating Voltage 100 max. V
DC Power Rating at +70 °C (Derated to Zero at 150 °C) 0.125 max. W
5x Rated Power Short-Time Overload, +25 °C, 5 s ± 0.1 max. R/R%
1.0 %
Tightest Tolerance Available
± 100 ppm/°C
± 50 ppm/°C
10 kΩ
± 25 ppm/°C
± 200 ppm/°C
15 kΩ20 kΩ5 kΩ20 Ω10 Ω2 Ω
MIC
www.vishay.com Vishay Electro-Films
Revision: 01-Mar-17 2Document Number: 61037
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches
SCHEMATIC IMPEDANCE VS. FREQUENCY
50 , 20 mil x 40 mil SIZE
0.020
0.040
0.012
0.010
TYPICAL RANGE
2 Ω to 6 Ω
0.020
0.040
0.012
0.010
TYPICAL RANGE
6.2 Ω to 19 Ω
0.020
0.040
0.012
0.010
TYPICAL RANGE
20 Ω to 20 kΩ
50.40
50.30
50.20
50.10
50.00
49.90
49.80
49.70
49.60
0.00 E + 00 5.00 E + 08 1.00 E + 09 1.50 E + 0.9 2.00 E + 09 2.50 E + 09 3.00 E + 09 3.50 E + 09
FREQUENCY (Hz)
IMPEDANCE (Ω)
MECHANICAL SPECIFICATIONS
PARAMETER
Chip Size 0.020" x 0.040" ± 0.003" (0.5 mm x 1.0 mm ± 0.076 mm)
Chip Thickness 0.010" ± 0.002" (0.254 mm ± 0.05 mm)
Chip Substrate Material 99.6 % alumina, 2 μ" to 4 μ" finish
Resistor Material Tantalum nitride, self-passivating
Bonding Pad Size 0.010" x 0.012" (0.254 mm x 0.30 mm) min.
Number of Pads 2
Pad Material 25 kÅ minimum gold standard
Backing None
Tape and Reel Orientation Pattern side down
GLOBAL PART NUMBER INFORMATION
Global Part Number: MIC5000BKKMSNHWS
Global Part Number Description: MIC 50 10 %, 100 ppm/°C, MIC trim, SnPb termination, no back metal, class H, WS
MODEL RESISTANCE RESISTANCE
MULTILPLIER
CODE
TOL.
CODE
(%)
TCR
(ppm/°C) TRIM
STYLE TERMINATION BACK
METAL VISUAL
CLASS PACKAGING
CODE
MIC
20 x 40
size
microwave
resistor
TaN on
alumina
First 4
digits are
significant
figures of
resistance
C = 0.001
B = 0.01
A = 0.1
0 = 1
1 = 10
F = 1.0
G = 2.0
H = 2.5
J = 5.0
K = 10
M = 20
E
= ± 25
C
= ± 50
K
= ± 100
L
= ± 200
R
= 0/- 250
M
= microwave
S
= standard
G = Au
S = SnPb
A = Al
T = lead
(Pb)-free
(e1)
G
= Au
N
= none
H
= class H
K
= class K
WS =
waffle pack
100 min, 1 mult
TS =
tape and reel
100 min, 1 mult
TF =
tape and reel
5000 min, 1 mult
00BK MSNK5 HWCMI 0 S
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
