Electric Double Layer Capacitors (Gold Capacitor)/ SE Stacked Coin Type Series: SE Features Endurance : 70 C 1000 h Automatic insertion available RoHS directive compliant Recommended Applications Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls. Specifications Category Temp. Range Maximum Operating Voltage Nominal Cap.Range -25 C to +70 C 5.5 V.DC 0.022 F to 0.22 F Capacitance change 30 % of initial measured value at +20 C (at -25 C) Internal resistance <5 times of initial measured value at +20 C (at -25 C) After 1000 hours application of 5.5 V. DC at +70 C, the capacitor shall meet the following limits. Capacitance change 30 % of initial measured value Internal resistance <4 times of initial specified value After 1000 hours storage at +70C without load, the capacitor shall meet the specified limits for Endurance. Characteristics at Low Temperature Endurance Shelf Life Dimensions in mm(not to scale) (Unit : mm) 5.40.8 Nominal Tolerance d P0 F W W0 W1 W2 H0 D0 P P1 P2 h, h1 H1 0.55 12.7 5.0 18.0 5.5< 9.0 0 to 3.0 16.4 4.0 12.7 3.85 6.35 0 30.3> 0.05 0.2 10.5 max. oh1 - + d + - W W1 W0 H0 P1 F W2 13.4 max. H1 oh P P2 Dimensions D0 P0 +0.8 -0.2 0.5 - 0.5 - 0.5 0.2 1.0 0.50 1.00 1.0 - Standard Products Maximum Operating Voltage (V.DC) 5.5 Capacitance (F) 0.022 0.047 0.10 0.22 Capacitance tolerance (F) 0.0176 to 0.0396 0.0376 to 0.0846 0.080 to 0.180 0.176 to 0.396 Internal resistance (Initial specified value) () at 1kHz < 150 < 120 < 75 < 75 Part number EECSE0H223 EECSE0H473 EECSE0H104 EECSE0H224 Min. Packaging Q'ty (pcs) 1000 1000 1000 1000 Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to affix the adhesive glue, the capacitor's surface temperature should not exceed 100 C for more than 60 seconds (maximum temperature should not exceed 105 C) 3. Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to the page of "Application Guidelines". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EEC-6 - 01 Feb. 2013