AC244060 - Microchip Technology

AC244060 1/2

PEP and Debug Header Help

Optional Debug Headers : AC244060

AC244060

Header IdentificationHeader Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header.

However, this number is not on the header, as the board may be used for multiple headers by inserting

different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Boar d Assembly Number

AC244060 PIC16F753-ICE 02-10153

Header Setup and OperationHeader Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the

correct device to emulate.

Header LimitationsHeader Limitations

See the “Limitations” section in your debug tool online Help file for details.

Header DimensionsHeader Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using

stand-offs, transition sockets or other extenders in the header connection socket to raise the header above

the target.

Figure: Dimensions – AC244060