FTR-K1 SERIES Discontinued in March 2019 POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, CQC recognized TV-5 is available Working class: C UL class B (130C) coil wire insulation Type of service: continuous duty Heavy duty miniature slim type power relay High isolation in small package - Insulation distance: 8 mm - Dielectric strength: 5,000 VAC (between coil and contacts) - Surge strength: 10,000 V Standard and high sensitivity types available Flux proof type and plastic sealed type available Cadmium free is available RoHS compliant. Please see page 8 for more information PARTNUMBER INFORMATION [Example] VS - 12 S M B U - N - UC (a) (*) (b) (c) (d) (e) (f ) (g) (h) (a) Relay type VS : VS-Series (b) Coil rated voltage 12 : 3.....100 VDC Coil rating table at page 3 (c) Coil type Nil S : Standard type (700-750mW) : High sensitive type (530mW) (d) Contact T M : 1 form C (SPDT) : 1 form A (SPST-NO) (e) Enclosure B C K : Flux proof type, RTII : Plastic sealed type (with type), RTIII : Plastic sealed type, RTIII (f) TV type Nil U : TV rating type : Non TV rating type (standard type) (g) Contact material N Nil 5 Nil E : Silver alloy (10A) (AgSnO2) : Silver-cadmium oxide (TV-5 rating) (AgCdO) : Silver-cadmium oxide (non TV rating) (AgCdO) : Gold overlay silver-nickel (non TV rating) (AgNi+Au) : Silver-nickel (non TV rating) (AgNi) (h) Safety standard UC SM2 IM2 : UL, CSA : UL, CSA, VDE : UL, CSA, VDE, SEV Note: Actual marking omits the hyphen (-) of (*) 1 FTR-K1VS SERIES SERIES Discontinued in March 2019 n Contact Data Life SPECIFICATION Timing Data Insulation VS - ( ) M VS - ( )U-5 VS - ( ) MN 1 form A (SPST-NO), 1 form C (SPDT) Construction Single Material Silver cadmiumoxide Resistance (initial) Max. 100m at 6VDC, 1A Contact rating 10A, 240VAC / 24VDC Max. carrying current * 14A Max. switching voltage 250VAC, 150 VDC Max. switching power 2,400VA, 240W Max. inrush current (at lamp load) 78A, 120VAC Min. switching load * 100 mA, 5 VDC (M, 5, E), 10mA 5 VDC (VS-) Mechanical Min. 20 x 106 operations Silver alloy Contact rating Min. 100 x 103 operations Motor Min. 30 x 103 operations Lamp Min. 50 x 103 operations (at 78A, 120VAC, lamp) Min. 15 x 103 operations (high senstive type) Silver cadmiumoxide VS - ( ) U-N VS - ( ) U VS - ( ) U-E Silver alloy Gold overlay silver nickel - - Rated power (at 20 C) 700-750 mW standard type, 530 mW high sensitive type Operate power (at 20 C) 350-370 mW standard type, 350 mW high sensitive type Operating temperature range -40 C to +85 C standard type, 40 C to +75 C high sensitive type (no frost) Operate (at nominal voltage) Max. 15 ms (without bounce) Release (at nominal voltage) Max. 10 ms (no diode) Resistance (initial) Min. 1,000M at 500VDC Dielectric strength Surge strength Open contacts 1,000VAC (50/60Hz) 1min., 10mA detection current Contacts to coil 5,000VAC (50/60Hz) 1min., 10mA detection current Coil to contacts 10,000V, 1.2 x 50s standard wave Clearance 8 mm Creepage 8 mm EN61810-1, VDE0435 Other Standard Type Configuration Electrical Coil Data TV-5 Rating Type Vibration resistance Shock Weight Voltage 250 V Pollution degree 2 Material group III Misoperation 10 to 55Hz double amplitude 1.5 mm Endurance 10 to 55Hz double amplitude 1.5 mm Misoperation Min. 100m/s (11 1ms) Endurance Min. 1,000m/s (6 1ms) Approximately 17 g *1 When max. carrying current is more than 10A, PCB layout needs to be considered. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1VS SERIES SERIES Discontinued in March 2019 n COIL RATING Standard type Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * Max. Coil Voltage (VDC) Rated Power (mW) 3 3 12.5 2.1 0.3 4.95 720 5 5 36 3.5 0.5 8.25 700 6 6 50 4.2 0.6 9.90 720 9 9 115 6.3 0.9 14.85 700 12 12 200 8.4 1.2 19.8 720 14 14 280 9.8 1.4 23.1 18 18 460 12.6 1.8 29.7 24 24 820 16.8 2.4 39.6 36 36 1,850 25.2 3.6 59.4 48 48 3,300 33.6 4.8 79.2 60 60 5,100 42 6 99 100 100 13,400 70 10 165 750 Rated Power (mW) 700 High sensitive type (250 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * Max. Coil Voltage (VDC) 3 3 17 2.1 0.3 4.95 5 5 47 3.5 0.5 8.25 6 6 68 4.2 0.6 9.90 9 9 115 6.3 0.9 14.85 12 12 270 8.4 1.2 19.8 14 14 370 9.8 1.4 23.1 18 18 610 12.6 1.8 29.7 24 24 1,000 16.8 2.4 39.6 36 36 2,450 25.2 3.6 59.4 48 48 4,400 33.6 4.8 79.2 60 60 6,800 42 6 99 100 100 18,860 70 10 165 530 Note: All values in the tables are valid for 20C and zero contact current. * Specified operate values are valid for pulse wave voltage. 3 Discontinued in March 2019 n FTR-K1VS SERIES SERIES SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E 56140 CSA C22.2 No. 14 LR 35579 VDE 0435, 0631, 0700, 0860 40014665 [TV-rating VS-( )M, SM, M-N] 10A, 240VAC/24VDC (resistive) 1/3 hp, 240VAC/120VAC Pilot duty: C150 TV-5 120 VAC [UN, SU-N] 15A, 120VAC/24VDC (resistive) 10A, 240VAC (resistive) 1/3 hp, 240VAC/120VAC Pilot duty: B150 [VS-( ) ( ) U-( ), ( )S( ) U-( )] 10A, 240VAC/24VDC (resistive) 1/3 hp, 240VAC/120VAC Pilot duty: C150 10A, 250VAC, cos 1 2.9A, 250VAC, cos 0.4 10A, 24VDC, 0msec Also complies with SEV, CQC n CHARACTERISTIC DATA 4 Discontinued in March 2019 FTR-K1VS SERIES SERIES 5 FTR-K1VS SERIES SERIES Discontinued in March 2019 n DIMENSIONS l Dimensions VS-MB type flux proof type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VS-MC type (plastic sealed type with tape) VS-MK type (Plastic sealed type) Unit: mm 6 FTR-K1VS SERIES SERIES Discontinued in March 2019 Dimensions Schematics (BOTTOM VIEW) VS-TB type (Flux proof type) PC board mounting hole layout (BOTTOM VIEW) VS-TC type (Plastic sealed type with tape) VS-TK type (Plastic sealed type) Unit: mm Note: This datasheet provide only + tolerance for outer dimensions. 7 Discontinued in March 2019 FTR-K1VS SERIES SERIES RoHS Compliance and Lead Free Information 1. General Information All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives. As per Annex III of directive 2011/65/EU. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Condition Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder Condition: Pre-heating: maximum 120C within 90 sec. Soldering: dip within 5 sec. at 255C 5C solder bath Relay must be cooled by air immediately after soldering Solder by Soldering Iron: Soldering Iron Temperature: Duration: 30-60W maximum 350-360C maximum 3 sec. 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 8 FTR-K1VS SERIES SERIES Discontinued in March 2019 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Shinagawa Seaside Park Tower 19F, 12-4, Higashi-shinagawa 4-chome, Shinagawa-ku, Tokyo,140-0002, Japan Tel: (81-3) 3450-1681 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 2290 North 1st Street, Suite 212 San Jose, CA 95131, USA Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2014 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users' own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. August 04, 2014 9