++ STEGO UK Ltd. + Unit 12, First Quarter Business Park + Blenheim Road + Epson, Surrey KT19 9QN + England + info@stego.co.uk +www.stego.co.uk ++
Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/
buyer in its final application. 04.08.2010
50
0
200
150
100
Heizleistung (W)
-40 -20 0
Umgebungstemperatur(°C)
Leistungs-Umgebungstemperatur-Diagramm
CS 160
20 40
Art.Nr.16000.0-00
Art.Nr.16010.0-00
Art.Nr.16020.0-00
178
160
147
132
119
122
110
102
93
85
66 61 55
50 44
Low surface temperature
Quick mounting due to clip fixing
Double insulated (plastic)
Wide voltage range
Small size
Heating
Technical Data
Operating voltage 120-240V AC/DC* (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Surface temperature < 80°C (176°F), except upper protective grille
Connection 4-pole terminal 2,5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating / Storage temperature -45 to +70°C (-49 to +158°F)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP20 / II (double insulated)
Approvals VDE + UL File No. E150057 (according to UL 499, intended for
the use within an enclosure in accordance with UL 508A)
Note other voltages on request
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
1) ambient temperature - see Heating capacity / Ambient temperature diagram; 2) measured 50mm above protective grille;
Heating capacity / Ambient temperature diagram CS 060
Heating capacity (W)
Temperature (°C)
150W
100W
50W
Art. No. Heating capacity1) Inrush current max. Pre-fuse T (time-delay) Air outlet temperature2) Dimensions Weight (approx.)
06000.0-00 50W 2.5A 4A +86°C (186.8°F) 110 x 60 x 90mm 0.3kg
06010.0-00 100W 4.5A 8A +120°C (248°F) 110 x 60 x 90mm 0.3kg
06020.0-00 150W 8A 8A +145°C (293°F) 150 x 60 x 90mm 0.5kg
Examples of connection
Heater CS 060
Thermostat
FTO 011
Heater CS 060
AC
AC
Heater CS 060
Thermostat
FTO 011
10
Touch-safe heater for the use in enclosures with electrical/electronical components. The design
of the heater supports the natural convection which results in a high air-current of warm air. The
surface temperatures on the accessible side surfaces of the housing are kept down as a result
of the heater design. Our complete range of thermostats and hygrostats can directly
be connected to the heater CS 060. This heater is also available in a version with plug-in
thermostat requiring no additional wiring (CSF 060). The heaters are designed for permanent
operation.
Touch-Safe Heater CS 060 Series 50W to 150W
(semiconductor)