Type 267 E Series (No.P-267E-E001) Type 267 is specially designed to SMD, based on our technology of chip tantalum capacitors acquired over many years. Fully-molded construction provides excellent mechanical protection, superior moisture resistance and high soldering heat resistance. Type 267 E Series has increased capacitance. Its volume efficiency is greatly improved compared to the same case size of M series. FEATURES 1. Type 267 E Series has increased capacitance. Its volume efficiency is greatly improved compared to the same case size of M series. 2. Dimensional accuracy and symmetrical terminal structure suitable for high-density mounting ensures excellent "Self-Alignment". 3. Soldering: 260 for 10 seconds by re-flow soldering. 4. Lead-free and RoHS Compliant RATING Item Rating Category temperature range (Operating temperature ) -55 ~ +125C Rated Temperature (Maximum operating temperature for DC rated Voltage) +85C DC rated voltage rangeUR See CATALOG NUMBERS AND Rated capacitance (Normal capacitance rangeCR) RATING OF EXTENDED PRODUCTS Rated capacitance tolerance Failure rate level 1%/1000 h Note(1): For operation 125,derate voltage linearly to 67% of 85 voltage rating. ORDERING INFORMATION 267 E 1602 106 M R 533 TYPE SERIES RATED VOLTAGE CAPACITANCE CAPACITANCE TOLERANCE STYLE OF REELED PACKAGE SPECIAL CODE Taping specification Marking 2501 4001 6301 1002 1602 2002 2502 3502 5002 Rated voltage 2.5VDC 4DVC 6.3DVC 10VDC 16VDC 20VDC 25VDC 35VDC 50VDC Marking 224 684 105 155 225 335 475 685 106 156 Capacitance Marking 0.22 m 0.68 m 1.0 m 1.5 m 2.2 m 3.3 m 4.7 m 6.8 m 10 m 15 m Capacitance Marking Tolerance K 10% M 20% Capacitance 22 m 33 m 47 m 68 m 100 m 150 m 220 m 330 m 470 m 680 m 226 336 476 686 107 157 227 337 477 687 Code R L N P Reel Size 180 180 330 330 Reel Reel Reel Reel Anode Notation Feed hole: Feed hole: + Feed hole: Feed hole: + DIMENSIONS [A case] L [B case] W W T T P1 P2 P1 [D3, H case] [C3 case] W W C T T (mm) Case code EIA Code L0.2 W0.2 T0.2 P10.2 P2 min. C0.1 A B 3216 3528 3.2 3.5 1.6 2.8 1.6 1.9 0.75 0.8 1.4 1.5 1.2 2.2 C3 6032 6.0 3.2 2.5 1.3 3.0 2.2 D3 7343 7.3 4.4 2.8 1.3 4.0 2.4 H 7343H 7.3 4.4 4.1 1.3 4.0 2.4 1 MARKING MARKING [A case ] Less than 100F C2.2A 100F or more Rated voltage (2) Rated voltage (2) Rated capacitance Rated capacitance (3) jA8A Date code (1) Date code (1) Capacitance tolerance (+/-10% notation) Capacitance tolerance (+/-10% notation) Polarity (Anode notation) Polarity (Anode notation) [B case] [C3, D3, H case] Capacitance tolerance (+/-10% notation) 474 35 A 106K 16 A Capacitance tolerance (K:+/-10%) Rated capacitance (4) Date code (1) Rated voltage Polarity (Anode notation) 1 Note ( ): Date codes are based on the Annex 1 Table 13 of JIS C 5101-1. Note (2): Rated voltage codes Rated voltage 2.5 4 6.3 10 16 20 25 code e g j A C D E Note (3): Rated capacitance codes Capacitance F 100 150 Code A8 E8 220 330 470 680 J8 N8 S8 W8 35 V 50 H Note (4): First two digits are significant figures of capacitance value(pF).Third digit is the number of zeros following. RECOMMENDED SOLDER PAD LAYOUT (mm) a EIA Code A B C3 D3 H 3216 3528 6032 7343 7343H b Case code c a Flow Reflow 3.0 3.2 4.2 5.2 5.2 2.0 2.0 2.4 2.4 2.4 b c 1.5 2.4 2.5 2.7 2.7 1.5 1.8 3.3 4.6 4.6 STANDARD RATING R.V.(VDC) Cap.( mF ) 2.5 4 6.3 10 16 20 25 35 0.22 50 A 0.33 0.47 0.68 A 1.0 A 1.5 A 2.2 3.3 A 4.7 6.8 A 10 A A A A A, B A A A, B B A A A A, B A, B A A A, B A, B B C3 A A A, B A, B B B, C3 C3 A A A, B A, B A, B C3 C3 D3 22 A A, B A, B A, B B, C3 C3 C3, D3 D3 33 A, B A, B A, B A, B, C3 B, C3 D3 D3 47 A, B A, B A, B, C3 B, C3 C3, D3 D3 68 A, B A, B, C3 A, B, C3 B, C3, D3 C3, D3 H 100 A, B A, B, C3 A, B, C3, D3 B, C3, D3 D3, H H 150 A, B A, B, C3, D3 B, C3, D3 C3, D3, H 220 A, B, C3 B, C3, D3 C3, D3, H C3, D3, H C3, D3 C3, D3, H H 470 C3, D3 D3 H 680 D3 D3 2 H C3 D3 15 330 B A 3 267E 2501 156 _ _ 1 2 267E 2501 226 _ _ 1 2 267E 2501 336 _ _ 533 1 2 267E 2501 336 _ _ 1 2 267E 2501 476 _ _ 533 1 2 267E 2501 476 _ _ 1 2 267E 2501 686 _ _ 533 1 2 267E 2501 686 _ _ 1 2 267E 2501 107 _ _ 534 1 2 267E 2501 107 _ _ 533 1 2 267E 2501 157 _ _ 534 1 2 267E 2501 157 _ _ 533 1 2 267E 2501 227 _ _ 535 1 2 267E 2501 227 _ _ 534 1 2 267E 2501 227 _ _ 734 1 2 267E 4001 685 _ _ 1 2 267E 4001 106 _ _ 1 2 267E 4001 156 _ _ 1 2 267E 4001 226 _ _ 533 1 2 267E 4001 226 _ _ 1 2 267E 4001 336 _ _ 533 1 2 267E 4001 336 _ _ 1 2 267E 4001 476 _ _ 533 1 2 267E 4001 476 _ _ 1 2 267E 4001 686 _ _ 534 1 2 267E 4001 686 _ _ 533 1 2 267E 4001 686 _ _ 720 1 2 267E 4001 107 _ _ 534 2 267E 4001 107 K _ 533 2 267E 4001 107 M _ 533 1 2 267E 4001 107 _ _ 720 1 2 267E 4001 157 _ _ 535 1 2 267E 4001 157 _ _ 534 1 2 Catalog Number (1)(2) 2.5 4 UR VDC 3.3 5 85 2.2 3.2 125 US VDC Case code 15 A 22 A 33 A 33 B 47 A 47 B 68 A 68 B 100 A 100 B 150 A 150 B 220 A 220 B 220 C3 6.8 A 10 A 15 A 22 A 22 B 33 A 33 B 47 A 47 B 68 A 68 B 68 C3 100 A 100 B 100 B 100 C3 150 A 150 B CR F 0.5 0.6 0.8 0.8 1.2 1.2 1.7 1.7 2.5 2.5 3.8 3.8 5.5 5.5 5.5 0.5 0.5 0.6 0.9 0.9 1.3 1.3 1.9 1.9 2.7 2.7 2.7 4.0 4.0 4.0 4.0 6.0 6.0 20 5 6 8 8 12 12 17 17 25 25 76 38 110 55 55 5 5 6 9 9 13 13 19 19 27 27 27 40 40 40 40 120 60 85 6.3 6.9 10 10 15 15 21 21 32 31 95 47 137 69 69 6.3 6.3 7.5 11 11 17 17 24 24 34 34 34 50 50 50 50 150 75 125 Leakage current(DCL) A 10 10 10 10 10 10 20 10 20 10 20 20 20 20 10 10 10 10 10 10 10 10 20 10 20 10 10 20 20 10 10 20 20 -55 10 10 10 10 10 10 20 10 20 10 20 20 20 20 10 10 10 10 10 10 10 10 20 10 20 10 10 20 20 10 10 20 20 85 15 15 15 15 15 15 20 15 20 15 20 20 20 20 15 15 15 15 15 15 15 15 20 15 20 15 15 20 20 15 15 20 20 125 Variation rate of cap.(C/C)% 0.12 0.12 0.12 0.12 0.15 0.12 0.30 0.12 0.30 0.25 0.32 0.30 0.36 0.34 0.22 0.08 0.08 0.08 0.12 0.08 0.12 0.08 0.20 0.08 0.30 0.20 0.08 0.30 0.22 0.25 0.10 0.32 0.34 -55 0.08 0.08 0.08 0.08 0.08 0.08 0.18 0.08 0.18 0.12 0.20 0.16 0.24 0.18 0.12 0.06 0.06 0.06 0.08 0.06 0.08 0.06 0.12 0.06 0.18 0.10 0.06 0.18 0.12 0.12 0.08 0.20 0.18 20 0.08 0.08 0.08 0.08 0.08 0.08 0.18 0.08 0.18 0.12 0.20 0.16 0.24 0.18 0.12 0.06 0.06 0.06 0.08 0.06 0.08 0.06 0.12 0.06 0.18 0.10 0.06 0.18 0.12 0.12 0.08 0.20 0.18 85 Dissipation factor CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS 0.10 0.10 0.10 0.10 0.10 0.10 0.22 0.10 0.22 0.12 0.20 0.18 0.24 0.20 0.14 0.08 0.08 0.08 0.10 0.08 0.10 0.08 0.14 0.08 0.22 0.10 0.08 0.22 0.14 0.12 0.08 0.20 0.20 125 7.5 7.5 7.5 3.0 7.5 3.0 7.5 3.0 7.5 5.0 2.5 5.0 2.5 5.0 1.0 7.5 7.5 7.5 7.5 3.0 7.5 3.0 7.5 3.0 7.5 3.0 0.6 7.5 5.0 5.0 1.0 2.5 5.0 7.2 7.1 7.1 2.8 7.1 2.8 7.1 2.7 7.1 4.7 2.0 4.7 2.0 4.7 0.95 7.2 7.2 7.1 7.1 2.8 7.1 2.8 7.1 2.7 7.1 2.7 0.55 7.1 4.7 4.7 0.95 2.0 4.7 10kHz 100kHz ESR A A A A A A A A A A C A C A A A A A A A A A A A A A A A A A A C A DCL( ) 3 Surge February, 2011 5 5 5 5 5 5 10 5 10 5 20 10 20 10 5 5 5 5 5 5 5 5 10 5 10 5 5 10 10 5 5 20 10 C/C% A A A A A A A A A A C A C A A A A A A A A A A A A A A A A A A C A DCL( ) 3 10 10 10 10 10 10 10 10 10 10 20 10 20 10 10 5 5 5 5 5 5 5 10 5 10 10 5 10 10 10 5 20 10 C/C% Resistance to soldering heat 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 C/C% to solvent Resistance A A A A A A A A A A C A C A A A A A A A A A A A A A A A A A A C A DCL( ) 3 5 5 5 5 5 5 20 5 20 5 20 20 20 20 5 5 5 5 5 5 5 5 20 5 20 5 5 20 20 5 5 20 20 C/C% Temp. cycling A A A A A A C A C A C C C C A A A A A A A A C A C A A C C A A C C DCL( ) 3 5 5 5 5 5 5 10 5 10 5 20 10 20 10 5 5 5 5 5 5 5 5 10 5 10 5 5 10 10 5 5 20 10 C/C% Damp heat Life B B B B B B C B C B C C C C B B B B B B B B C B C B B C C B B C C DCL( ) 3 10 10 10 10 10 10 15 10 20 10 30 20 30 20 10 10 10 10 10 10 10 10 15 10 20 10 10 20 20 10 10 30 20 C/C% 4 267E 4001 157 _ _ 734 1 2 267E 4001 157 _ _ 720 2 267E 4001 227 M _ 534 1 2 267E 4001 227 _ _ 734 1 2 267E 4001 227 _ _ 720 1 2 267E 4001 337 _ _ 735 1 2 267E 4001 337 _ _ 734 1 2 267E 4001 477 _ _ 735 1 2 267E 4001 477 _ _ 734 1 2 267E 4001 687 _ _ 734 1 2 267E 6301 475 _ _ 1 2 267E 6301 685 _ _ 1 2 267E 6301 106 _ _ 1 2 267E 6301 156 _ _ 533 1 2 267E 6301 156 _ _ 1 2 267E 6301 226 _ _ 533 1 2 267E 6301 226 _ _ 1 2 267E 6301 336 _ _ 533 1 2 267E 6301 336 _ _ 1 2 267E 6301 476 _ _ 534 1 2 267E 6301 476 _ _ 533 1 2 267E 6301 476 _ _ 720 1 2 267E 6301 686 _ _ 534 1 2 267E 6301 686 _ _ 533 1 2 267E 6301 686 _ _ 720 1 2 267E 6301 107 _ _ 535 1 2 267E 6301 107 _ _ 534 1 2 267E 6301 107 _ _ 734 1 2 267E 6301 107 _ _ 720 1 2 267E 6301 157 _ _ 534 1 2 267E 6301 157 _ _ 734 1 2 267E 6301 157 _ _ 720 1 2 267E 6301 227 _ _ 735 1 2 267E 6301 227 _ _ 734 1 2 267E 6301 227 _ _ 1 2 267E 6301 337 _ _ 735 1 2 Catalog Number (1)(2) 4 6.3 UR VDC 5 8 85 3.2 5 125 US VDC 150 150 220 220 220 330 330 470 470 680 4.7 6.8 10 15 15 22 22 33 33 47 47 47 68 68 68 100 100 100 100 150 150 150 220 220 220 330 CR F C3 D3 B C3 D3 C3 D3 C3 D3 D3 A A A A B A B A B A B C3 A B C3 A B C3 D3 B C3 D3 C3 D3 H C3 Case code 6.0 6.0 8.8 8.8 8.8 13 13 19 19 27 0.5 0.5 0.6 0.9 0.9 1.4 1.4 2.1 2.1 3.0 3.0 3.0 4.3 4.3 4.3 6.3 6.3 6.3 6.3 9.5 9.5 9.5 14 14 14 21 20 60 60 88 88 88 132 132 188 188 272 5 5 6 9 9 14 14 21 21 30 30 30 43 43 43 126 63 63 63 95 95 95 139 139 139 208 85 75 75 110 110 110 165 165 235 235 340 6.3 6.3 7.9 12 12 17 17 26 26 37 37 37 54 54 54 157 79 79 79 118 118 118 173 173 173 260 125 Leakage current(DCL) A 10 10 20 10 10 10 10 30 15 15 10 10 10 10 10 10 10 20 10 20 10 10 20 20 10 20 20 10 10 20 10 10 10 10 10 30 -55 10 10 20 10 10 10 10 20 10 10 10 10 10 10 10 10 10 20 10 20 10 10 20 10 10 20 20 10 10 20 10 10 10 10 10 20 85 15 15 20 15 15 15 15 20 15 15 15 15 15 15 15 15 15 20 15 20 15 15 20 15 15 20 20 15 15 20 15 15 15 15 15 20 125 Variation rate of cap.(C/C)% 0.12 0.10 0.34 0.22 0.15 0.22 0.18 0.36 0.22 0.22 0.08 0.08 0.08 0.12 0.08 0.12 0.08 0.20 0.08 0.20 0.20 0.08 0.20 0.18 0.08 0.30 0.22 0.12 0.10 0.30 0.18 0.15 0.22 0.15 0.15 0.30 -55 0.08 0.08 0.18 0.12 0.08 0.14 0.10 0.26 0.18 0.18 0.06 0.06 0.06 0.08 0.06 0.08 0.06 0.12 0.06 0.12 0.10 0.06 0.12 0.10 0.06 0.18 0.12 0.08 0.08 0.20 0.10 0.08 0.14 0.08 0.08 0.20 20 0.08 0.08 0.18 0.12 0.08 0.14 0.10 0.26 0.18 0.18 0.06 0.06 0.06 0.08 0.06 0.08 0.06 0.12 0.06 0.12 0.10 0.06 0.12 0.10 0.06 0.18 0.12 0.08 0.08 0.20 0.10 0.08 0.14 0.08 0.08 0.20 85 Dissipation factor 0.10 0.08 0.20 0.14 0.10 0.16 0.12 0.30 0.20 0.20 0.08 0.08 0.08 0.10 0.08 0.10 0.08 0.14 0.08 0.14 0.10 0.08 0.14 0.12 0.08 0.18 0.14 0.08 0.08 0.22 0.12 0.10 0.16 0.10 0.10 0.24 125 1.0 0.5 5.0 1.0 0.5 1.0 0.5 1.0 0.5 0.5 7.5 7.5 7.5 7.5 3.0 7.5 3.0 7.5 3.0 7.5 3.0 0.6 7.5 3.0 1.0 2.5 5.0 1.0 0.5 3.0 1.0 0.5 1.0 0.5 0.31 1.0 0.95 0.45 4.7 0.95 0.45 0.95 0.45 0.95 0.45 0.45 7.2 7.2 7.1 7.1 2.8 7.1 2.8 7.1 2.7 7.1 2.7 0.55 7.1 2.7 0.95 2.0 4.7 0.95 0.45 2.7 0.95 0.45 0.95 0.45 0.27 0.95 10kHz 100kHz ESR A A A A A A A A A A A A A A A A A A A A A A A A A C A A A C A A A A A A DCL(3) Surge 5 5 10 5 5 15 5 20 15 15 5 5 5 5 5 5 5 10 5 10 5 5 10 10 5 20 10 5 5 20 5 5 15 5 5 20 C/C% A A A A A A A A A A A A A A A A A A A A A A A A A C A A A C A A A A A A DCL(3) 10 5 10 10 5 5 5 10 10 10 5 5 5 5 5 5 5 10 5 10 10 5 10 10 5 20 10 10 5 20 10 5 5 5 5 10 C/C% Resistance to soldering heat 3 3 3 3 3 10 3 3 10 10 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 10 3 3 3 C/C% to solvent Resistance A A A A A A A A A A A A A A A A A A A A A A A A A C A A A C A A A A A A DCL(3) 5 5 20 5 5 10 5 20 20 20 5 5 5 5 5 5 5 20 5 20 5 5 20 20 5 20 20 5 5 20 5 5 10 5 5 20 C/C% Temp. cycling A A C A A A A C A A A A A A A A A C A C A A C C A C C A A C A A A A A C DCL(3) 5 5 10 5 5 10 5 20 10 10 5 5 5 5 5 5 5 10 5 10 5 5 10 10 5 20 10 5 5 20 5 5 10 5 5 20 C/C% Damp heat B B C B B B B C B B B B B B B B B C B C B B C C B C C B B C B B B B B C DCL(3) Life 10 10 20 10 10 10 10 20 15 15 10 10 10 10 10 10 10 15 10 20 10 10 20 20 10 30 20 10 10 30 10 10 10 10 10 20 C/C% 5 267E 6301 337 _ _ 734 1 2 267E 6301 337 _ _ 1 2 267E 6301 477 _ _ 734 2 267E 6301 687 M _ 734 1 2 267E 1002 335 _ _ 1 2 267E 1002 475 _ _ 1 2 267E 1002 685 _ _ 1 2 267E 1002 106 _ _ 533 1 2 267E 1002 106 _ _ 1 2 267E 1002 156 _ _ 533 1 2 267E 1002 156 _ _ 1 2 267E 1002 226 _ _ 533 2 267E 1002 226 K _ 2 267E 1002 226 M _ 1 2 267E 1002 336 _ _ 534 1 2 267E 1002 336 _ _ 533 1 2 267E 1002 336 _ _ 720 1 2 267E 1002 476 _ _ 533 1 2 267E 1002 476 _ _ 720 2 267E 1002 686 M _ 534 1 2 267E 1002 686 _ _ 734 1 2 267E 1002 686 _ _ 720 1 2 267E 1002 107 _ _ 534 1 2 267E 1002 107 _ _ 734 1 2 267E 1002 107 _ _ 720 1 2 267E 1002 157 _ _ 735 1 2 267E 1002 157 _ _ 734 1 2 267E 1002 157 _ _ 1 2 267E 1002 227 _ _ 735 1 2 267E 1002 227 _ _ 734 1 2 267E 1002 227 _ _ 1 2 267E 1002 337 _ _ 1 2 267E 1002 477 _ _ 1 2 267E 1602 225 _ _ 1 2 267E 1602 335 _ _ 1 2 267E 1602 475 _ _ 1 2 Catalog Number (1)(2) 6.3 10 16 UR VDC 8 13 20 85 5 8 13 125 US VDC 330 330 470 680 3.3 4.7 6.8 10 10 15 15 22 22 22 33 33 33 47 47 68 68 68 100 100 100 150 150 150 220 220 220 330 470 2.2 3.3 4.7 CR F D3 H D3 D3 A A A A B A B A B B A B C3 B C3 B C3 D3 B C3 D3 C3 D3 H C3 D3 H H H A A A Case code 21 21 30 43 0.5 0.5 0.7 1.0 1.0 1.5 1.5 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 15 15 22 22 22 33 47 0.5 0.5 0.8 20 208 208 296 428 5 5 7 10 10 15 15 22 22 22 33 33 33 47 47 68 68 68 100 100 100 150 150 150 220 220 220 330 470 5 5 8 85 260 260 370 535 6.3 6.3 8.5 13 13 19 19 28 28 28 41 41 41 59 59 85 85 85 125 125 130 188 188 188 275 275 275 412 588 6.3 6.6 9.4 125 Leakage current(DCL) A 15 10 15 15 10 10 10 10 10 20 10 20 10 10 20 10 10 10 10 20 10 10 20 10 10 30 10 10 30 15 10 10 10 10 10 10 -55 10 10 10 10 10 10 10 10 10 20 10 20 10 10 20 10 10 10 10 20 10 10 20 10 10 20 10 10 20 10 10 10 10 10 10 10 85 15 15 15 15 15 15 15 15 15 20 15 20 15 15 20 15 15 15 15 20 15 15 20 15 15 20 15 15 20 15 15 15 15 15 15 15 125 Variation rate of cap.(C/C)% 0.16 0.15 0.18 0.24 0.08 0.08 0.08 0.12 0.08 0.20 0.08 0.20 0.12 0.08 0.20 0.12 0.08 0.15 0.08 0.18 0.12 0.08 0.28 0.12 0.15 0.26 0.15 0.15 0.26 0.15 0.15 0.15 0.15 0.08 0.08 0.12 -55 0.14 0.08 0.16 0.20 0.06 0.06 0.06 0.08 0.06 0.12 0.06 0.12 0.08 0.06 0.14 0.08 0.06 0.08 0.06 0.12 0.10 0.06 0.18 0.10 0.08 0.14 0.08 0.08 0.14 0.10 0.08 0.10 0.10 0.06 0.06 0.08 20 0.14 0.08 0.16 0.20 0.06 0.06 0.06 0.08 0.06 0.12 0.06 0.12 0.08 0.06 0.14 0.08 0.06 0.08 0.06 0.12 0.10 0.06 0.18 0.10 0.08 0.14 0.08 0.08 0.14 0.10 0.08 0.10 0.10 0.06 0.06 0.08 85 Dissipation factor 0.16 0.10 0.18 0.24 0.08 0.08 0.08 0.10 0.08 0.14 0.08 0.14 0.10 0.08 0.16 0.10 0.08 0.10 0.08 0.14 0.12 0.08 0.20 0.12 0.10 0.16 0.10 0.10 0.16 0.12 0.10 0.12 0.12 0.08 0.08 0.10 125 0.5 0.3 0.5 0.5 7.5 7.5 7.5 7.5 3.0 7.5 3.0 7.5 3.0 3.0 7.5 3.0 0.6 3.0 1.0 3.0 1.0 0.5 3.0 1.0 0.5 1.0 0.5 0.31 1.0 0.5 0.3 0.3 0.3 7.5 7.5 7.5 0.45 0.27 0.45 0.45 7.2 7.2 7.1 7.1 2.9 7.1 2.8 7.1 2.8 2.8 7.1 2.7 0.55 2.7 0.95 2.7 0.95 0.45 2.7 0.95 0.45 0.95 0.45 0.27 0.95 0.45 0.27 0.27 0.27 7.2 7.4 7.1 10kHz 100kHz ESR A A A A A A A A A A A A A A A A A A A A A A C A A A A A A A A A A A A A DCL(3) Surge 15 5 15 15 5 5 5 5 5 10 5 10 5 5 10 5 5 5 5 10 15 5 20 15 5 20 5 5 20 15 5 5 5 5 5 5 C/C% A A A A A A A A A A A A A A A A A A A A A A C A A A A A A A A A A A A A DCL(3) 10 5 10 10 5 5 5 5 5 10 5 10 10 5 10 10 5 10 5 10 5 5 20 5 5 10 5 5 10 10 5 5 5 5 5 5 C/C% Resistance to soldering heat 10 3 10 10 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 10 3 3 10 3 3 3 3 3 10 3 3 3 3 3 3 C/C% to solvent Resistance A A A A A A A A A A A A A A A A A A A A A A C A A A A A A A A A A A A A DCL(3) 20 5 20 20 5 5 5 5 5 20 5 20 5 5 20 5 5 5 5 20 10 5 20 10 5 20 5 5 20 20 5 5 5 5 5 5 C/C% Temp. cycling A A A A A A A A A C A C A A C A A A A C A A C A A C A A C A A A A A A A DCL(3) 10 5 10 20 5 5 5 5 5 10 5 10 5 5 10 5 5 5 5 10 10 5 20 10 5 20 5 5 20 10 5 5 5 5 5 5 C/C% Damp heat B B B B B B B B B C B C B B C B B B B C B B C B B C B B C B B B B B B B DCL(3) Life 15 10 15 20 10 10 10 10 10 20 10 20 10 10 20 10 10 10 10 20 10 10 30 10 10 20 10 10 20 15 10 10 10 10 10 10 C/C% 6 267E 1602 685 _ _ 533 1 2 267E 1602 685 _ _ 1 2 267E 1602 106 _ _ 533 1 2 267E 1602 106 _ _ 1 2 267E 1602 156 _ _ 533 1 2 267E 1602 156 _ _ 1 2 267E 1602 226 _ _ 533 1 2 267E 1602 226 _ _ 720 1 2 267E 1602 336 _ _ 533 1 2 267E 1602 336 _ _ 720 1 2 267E 1602 476 _ _ 734 1 2 267E 1602 476 _ _ 720 1 2 267E 1602 686 _ _ 734 1 2 267E 1602 686 _ _ 720 1 2 267E 1602 107 _ _ 734 1 2 267E 1602 107 _ _ 1 2 267E 2002 155 _ _ 1 2 267E 2002 225 _ _ 1 2 267E 2002 335 _ _ 1 2 267E 2002 475 _ _ 533 1 2 267E 2002 475 _ _ 1 2 267E 2002 685 _ _ 533 1 2 267E 2002 685 _ _ 1 2 267E 2002 106 _ _ 1 2 267E 2002 156 _ _ 720 1 2 267E 2002 226 _ _ 720 1 2 267E 2002 336 _ _ 720 1 2 267E 2002 476 _ _ 720 1 2 267E 2002 686 _ _ 1 2 267E 2002 107 _ _ 1 2 267E 2502 105 _ _ 1 2 267E 2502 155 _ _ 1 2 267E 2502 225 _ _ 1 2 267E 2502 335 _ _ 533 1 2 267E 2502 335 _ _ 1 2 267E 2502 475 _ _ 533 1 2 Catalog Number (1)(2) 16 20 25 UR VDC 20 26 32 85 13 16 20 125 US VDC 6.8 6.8 10 10 15 15 22 22 33 33 47 47 68 68 100 100 1.5 2.2 3.3 4.7 4.7 6.8 6.8 10 15 22 33 47 68 100 1.0 1.5 2.2 3.3 3.3 4.7 CR F 20 11 11 16 16 24 24 35 35 53 53 75 75 109 109 160 160 5 5 7 9 9 14 14 20 30 44 66 94 136 200 5 5 6 8 8 12 85 14 14 20 20 30 30 44 44 66 66 94 94 136 136 200 200 6.3 6.3 8.3 12 12 17 17 25 38 55 83 117 170 250 6.3 6.3 6.9 10 10 15 125 Leakage current(DCL) A A 1.1 B 1.1 A 1.6 B 1.6 A 2.4 B 2.4 B 3.5 C3 3.5 B 5.3 C3 5.3 C3 7.5 D3 7.5 C3 11 D3 11 D3 16 H 16 A 0.5 A 0.5 A 0.7 A 0.9 B 0.9 A 1.4 B 1.4 B 2.0 C3 3.0 C3 4.4 D3 6.6 D3 9.4 H 13.6 H 20 A 0.5 A 0.5 A 0.6 A 0.8 B 0.8 A 1.2 Case code 10 10 20 10 20 10 12 10 10 10 10 10 20 10 15 10 10 10 10 10 10 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 -55 10 10 20 10 20 10 10 10 10 10 10 10 15 10 10 10 10 10 10 10 10 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 85 15 15 20 15 20 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 125 Variation rate of cap.(C/C)% 0.10 0.08 0.14 0.08 0.18 0.12 0.14 0.08 0.14 0.08 0.12 0.08 0.12 0.10 0.12 0.15 0.08 0.08 0.12 0.10 0.08 0.14 0.08 0.12 0.08 0.08 0.08 0.08 0.08 0.10 0.06 0.08 0.08 0.08 0.08 0.08 -55 0.06 0.06 0.10 0.06 0.12 0.08 0.10 0.06 0.10 0.06 0.10 0.06 0.10 0.08 0.10 0.08 0.06 0.06 0.08 0.06 0.06 0.10 0.06 0.08 0.06 0.06 0.06 0.06 0.06 0.08 0.04 0.06 0.06 0.06 0.06 0.06 20 0.08 0.06 0.10 0.06 0.12 0.08 0.10 0.06 0.10 0.06 0.10 0.06 0.10 0.08 0.10 0.08 0.06 0.06 0.08 0.08 0.06 0.10 0.06 0.08 0.06 0.06 0.06 0.06 0.06 0.08 0.04 0.06 0.06 0.06 0.06 0.06 85 Dissipation factor 0.10 0.08 0.12 0.08 0.14 0.10 0.12 0.08 0.12 0.08 0.12 0.08 0.12 0.08 0.12 0.10 0.08 0.08 0.10 0.10 0.08 0.10 0.08 0.10 0.08 0.08 0.06 0.06 0.08 0.08 0.06 0.08 0.08 0.08 0.08 0.08 125 7.5 3.0 7.5 3.0 7.5 3.0 3.0 0.6 2.0 1.0 1.0 0.5 1.0 0.5 0.5 0.4 7.5 7.5 7.5 7.5 3.0 5.0 3.0 3.0 1.2 1.0 1.0 1.0 0.4 0.4 7.5 7.5 7.5 7.5 3.0 7.5 7.1 2.9 7.1 2.9 7.1 2.7 2.9 0.55 1.9 0.95 0.95 0.45 0.95 0.45 0.45 0.37 7.2 7.4 7.1 7.1 2.9 4.7 2.9 2.8 1.15 0.95 0.97 0.98 0.37 0.37 7.4 7.4 7.4 7.4 2.9 7.4 10kHz 100kHz ESR A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A DCL(3) Surge 5 5 10 5 10 5 15 5 5 5 15 5 15 5 15 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 5 5 5 C/C% A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A DCL(3) 5 5 10 5 10 10 10 5 10 5 5 5 10 5 10 5 5 5 5 5 5 5 5 10 5 5 5 5 5 20 5 5 5 5 5 5 C/C% Resistance to soldering heat 3 3 3 3 3 3 3 3 3 3 10 3 3 3 10 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 C/C% to solvent Resistance A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A DCL(3) 5 5 20 5 20 5 5 5 5 5 10 5 10 5 20 5 5 5 5 5 5 15 5 5 5 5 5 5 5 5 5 5 10 5 5 5 C/C% Temp. cycling A A C A C A A A A A A A A A A A A A A A A A A A A A A A A A A A C A A A DCL(3) 5 5 10 5 10 5 5 5 5 5 10 5 15 5 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 5 5 5 C/C% Damp heat B B C B C B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B DCL(3) Life 10 10 20 10 20 10 15 10 10 10 10 10 15 10 15 10 10 10 10 10 10 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 C/C% 7 4.7 6.8 10 10 15 22 22 33 100 0.68 1.0 2.2 2.2 3.3 6.8 10 15 22 0.22 0.68 2.2 4.7 1.2 1.7 2.5 2.5 3.7 5.5 5.5 8.3 25 0.5 0.5 0.8 0.8 1.2 2.4 3.5 5.3 7.7 0.5 0.5 1.1 2.4 20 12 17 25 25 38 55 55 83 250 5 5 8 8 12 24 35 53 77 5 5 11 24 85 15 21 31 31 48 69 69 104 312 6.3 6.3 9.6 9.6 14 30 44 66 96 6.3 6.3 14 29 125 Leakage current(DCL) A CR = Capacitance B B B C3 C3 C3 D3 D3 H A A A B B C3 C3 D3 D3 A B C3 D3 Case code 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 -55 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 85 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 125 Variation rate of cap.(C/C)% 0.08 0.12 0.08 0.08 0.10 0.08 0.08 0.08 0.15 0.06 0.06 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.06 0.06 0.08 0.08 -55 0.06 0.08 0.06 0.06 0.08 0.06 0.06 0.06 0.10 0.04 0.04 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.04 0.04 0.06 0.06 20 0.06 0.08 0.06 0.06 0.08 0.06 0.06 0.06 0.10 0.04 0.04 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.04 0.04 0.06 0.06 85 Dissipation factor 0.08 0.10 0.08 0.08 0.10 0.08 0.06 0.06 0.12 0.06 0.06 0.08 0.08 0.08 0.08 0.06 0.06 0.06 0.06 0.06 0.08 0.08 125 3.0 3.0 3.0 1.2 1.4 1.0 1.0 1.0 0.4 7.5 7.5 7.5 3.0 3.0 1.2 1.4 1.0 1.0 7.5 3.0 1.2 1.0 2.9 2.7 2.9 1.17 1.3 0.98 0.98 0.98 0.37 7.4 7.4 7.4 2.9 2.9 1.17 1.3 0.98 0.98 7.5 3.0 1.2 1.0 10kHz 100kHz ESR Surge A A A A A A A A A A A A A A A A A A A A A A DCL(3) Note3 : *DCL code : A=Shall not exceed the value of initial specification., B=Shall not exceed 1.25 times the value of initial specification., C=Shall not exceed 2 times the value of initial specification. Note2 : For Reeled Package, insert "R", "L", "N" or "P" into _2. Note1 : For Capacitance Tolerance, insert "K" or "M" into _1. US = Surge Voltage 20 28 40 125 CR F * UR = Rated Voltage 32 44 63 85 US VDC 25 35 50 UR VDC 267E 2502 475 _ _ 1 2 267E 2502 685 _ _ 1 2 267E 2502 106 _ _ 533 1 2 267E 2502 106 _ _ 720 1 2 267E 2502 156 _ _ 720 1 2 267E 2502 226 _ _ 734 1 2 267E 2502 226 _ _ 720 1 2 267E 2502 336 _ _ 720 1 2 267E 2502 107 _ _ 1 2 267E 3502 684 _ _ 1 2 267E 3502 105 _ _ 1 2 267E 3502 225 _ _ 533 1 2 267E 3502 225 _ _ 1 2 267E 3502 335 _ _ 1 2 267E 3502 685 _ _ 720 1 2 267E 3502 106 _ _ 720 1 2 267E 3502 156 _ _ 720 1 2 267E 3502 226 _ _ 720 1 2 267E 5002 224 _ _ 1 2 267E 5002 684 _ _ 1 2 267E 5002 225 _ _ 720 1 2 267E 5002 475 _ _ 720 1 2 Catalog Number (1)(2) 5 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 C/C% A A A A A A A A A A A A A A A A A A A A A A DCL(3) 5 20 10 5 5 5 5 5 20 5 5 5 5 5 5 10 5 5 5 5 5 5 C/C% Resistance to soldering heat 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 C/C% to solvent Resistance A A A A A A A A A A A A A A A A A A A A A A DCL(3) 5 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 C/C% Temp. cycling A C C A A A A A A A A A A A A C A A A A A A DCL(3) 5 20 10 5 5 5 5 5 5 5 5 5 5 5 5 10 5 5 5 5 5 5 C/C% Damp heat B C B B B B B B B B B B B B B B B B B B B B DCL(3) Life 10 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 C/C% PERFORMANCE No. Item Leakage Current (A) Performance Shall not exceed 0.01 CV or 0.5 whichever is greater. Capacitance (F) Shall be within tolerance of the nominal value specified. Dissipation Factor Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. ESR (Equivalent series resistance) Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. 1 2 3 4 Characteristics at High and LowTemperature Leakage Current Step1 Capacitance Dissipation Factor Capacitance Change Step2 Step3 5 Step4 Step5 Step6 Surge 6 Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Appearance Shear Test JIS C 5101-1, 4.29 Shall not exceed the value in No.1. Shall be within the specified tolerance. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.1. Measuring temperature : 20 2C Measuring temperature : -553 C Measuring temperature : 20 2C Shall be within 2% of the value at Step 1. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.1. Measuring temperature : 852C Measuring temperature : 1252C Measuring voltage : Derated voltage at 125C Measuring temperature : 20 2C Shall be within 2% of the value at Step 1. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. There shall be no evidence of mechanical damage. No exfoliation between lead terminal and board. 7 8 Test method JIS C 5101-1, 4.9 Applied Voltage : Rated Voltage for 5 min. Temperature : 20C JIS C 5101-1, 4.7 Frequency : 120 Hz 20% Voltage : 0.5Vrms+1.5 ~2VDC Temperature : 20C JIS C 5101-1, 4.8 Frequency : 120 Hz 20% Voltage : 0.5Vrms+1.5 ~2VDC Temperature : 20C Frequency : 10 kHz or 100kHz Temperature : 20C Substrate Bending Test Capacitance Appearance Initial value to remain steady during measurement. There shall be no evidence of mechanical damage. Vibration Capacitance Appearance Initial value to remain steady during measurement. There shall be no evidence of mechanical damage. 9 8 JIS C 5101-1, 4.26 Test temperature and applied voltage : To each half of specimens * 85 2C, * 125 2C Applied Voltage :DC surge voltage Series protective resistance : 1000 Discharge resistance : 1000 JIS C 5101-1, 4.34 Capacitors mounted under conditions JIS C 5101-1, 4.33 are used as specimens. Soldering : Indirect heating Temperature : 240 10C Duration : 10s or less Applied pressure : 5N Duration : 10 1 s JIS C 5101-1, 4.35 Bending : 3 mm Duration:5s JIS C 5101-1, 4.17 Frequency range : 10 ~ 55 Hz Swing width : 1.5 mm Vibration direction : 3 directions with mutually right-angled Duration : 2 hours in each of these mutually perpendicular directions (total 6 hours) Mounting : Solder terminal to the printed board Item No. Vibration Capacitance Appearance Performance Initial value to remain steady during measurement. There shall be no evidence of mechanical damage. 9 Shock There shall be no intermittent contact of 0.5 ms or greater, short, or open. Nor shall there be any spark discharge, insulation breakdown, or evidence of mechanical damage. Solderability Shall be covered to over 3/4 of terminal surface by new soldering. 10 11 12 13 Leakage Current Capacitance Change Dissipation Factor Appearance Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. Component solvent resistance Leakage Current Capacitance Change Dissipation Factor Shall not exceed the value in No.1. Solvent resistance of marking Visual examination After the test the marking shall be legible. Rapid Change of Temperature Leakage Current Capacitance Change Dissipation Factor Appearance Leakage Current Capacitance Change Dissipation Factor Appearance Leakage Current Capacitance Change Dissipation Factor Appearance Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. Resistance to Soldering Heat There shall be no evidence of mechanical damage. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. 14 15 Damp heat, Steady state 16 Endurance 17 There shall be no evidence of mechanical damage. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. There shall be no evidence of mechanical damage. Shall not exceed the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall be within the values shown in CATALOG NUMBERS AND RATING OF EXTENDED PRODUCTS. Shall not exceed the value in No.3. There shall be no evidence of mechanical damage. 9 Test method JIS C 5101-1, 4.17 Frequency range : 10 ~ 55 Hz Swing width : 1.5 mm Vibration direction : 3 directions with mutually right-angled Duration : 2 hours in each of these mutually perpendicular directions (total 6 hours) Mounting : Solder terminal to the printed board JIS C 5101-1, 4.19 Peak acceleration : 490 m/s2 Duration : 11 ms Wave form : Half-sine JIS C 5101-1, 4.15 Solder temperature : 230 5C Dipping time : 3 to 5 s Dipping depth : Terminal shall be dipped into melted solder. JIS C 5101-1, 4.14 One of the following methods (a) Complete dipping method Solder temperature: 260 5C Dipping time: 10 1 s (b) Terminal dipping method Solder temperature: 260 5C Dipping time: 10 1 s JIS C 5101-1, 4.31 Temperature : 23 5C Dipping time : 5 0.5 min. Conditioning : JIS C 0052 method 2 Solvent : 2-propanol (Isopropyl alcohol) JIS C 5101-1, 4.32 Temperature : 23 5C Dipping time : 5 0.5 min. Conditioning : JIS C 0052 method 1 Solvent : 2-propanol (Isopropyl alcohol) Rubbing material : cotton wool JIS C 5101-1, 4.16 Step 1 : -55 3C, 30 3 min. Step 2 : 25 +10 -5 C, 3 min. max. Step 3 : 125 2C, 30 3 min. Step 4 : 25 +10 -5 C, 3 min. max. Number of cycles : 5 JIS C 5101-1, 4.22 Temperature : 40 2C Moisture : 90 ~ 95%RH Duration : 500 +24 0 h JIS C 5101-1, 4.23 Test temperature and applied voltage : 85 2C and rated voltage or 125 3C and 2/3 x rated voltage Duration : 2000 +72 h 0 Power supply impedance : 3 or less FREQUENCY CHARACTERISTICS 267E 35VDC-1mF A-case , Sample:5pcs Measuring temperature : room temperature 10K Imp.() 1K Impedance & ESR() 100 10 E.S.R.() 1 0.1 0.01 0.001 100 1K 10K 1M 100K 10M Frequency Hz TEMPERATURE CHARACTERISTICS 267E 35VDC-1mF A-case , Sample:12pcs. 12 mean 10 Capacitance Change 8 1000 6 4 100 2 0 -2 10 -4 -6 -8 -60 -40 -20 0 20 40 60 80 100 120 1 Dissipation factor Temperature() 0.08 0.1 0.06 0.04 0.02 0.01 0.00 -60 -40 -20 0 20 40 60 Temperature() 80 100 120 0 20 40 60 80 100 120 Temperature() 10 DAMP HEAT, STEADY STATE 40, 95%RH 267E 35VDC-1mF A-case Sample: 50pcs. Capacitance hange (%) 10 5 0 -5 -10 -15 -20 -25 Max. mean Min. Max. mean Min. Dissipation factor 0.05 0.04 0.03 0.02 0.01 0 100 Leakage current (A) 10 1 0.1 0.01 0.001 1 Dissipation factor Capacitance hange (%) ENDURANCE INITIAL VALUE DIP260 10 10sec 100 1000 10000 Time (Hours) 85, RATED VOLTAGE 267E 35VDC-1mF A-case Sample: 50pcs. 10 5 0 -5 -10 -15 -20 -25 0.05 0.04 0.03 0.02 0.01 0 Leakage current (A) 100 10 1 0.1 0.01 0.001 1 INITIAL VALUE DIP260 10 10sec 100 Time(Hours) 11 1000 10000 Application Notes for Tantalum Solid Electrolytic Capacitor 1. Operating Voltage Tantalum Solid Electrolytic Capacitor shall be operated at the rated voltage or lower. Rated voltage: The "rated voltage" refers to the maximum DC voltage that is allowed to be continuously applied between the capacitor terminals at the rated temperature. Surge voltage: The "surge voltage" refers to the voltage that is allowed to be instantaneously applied to the capacitor at the rated temperature or the maximum working temperature. The capacitor shall withstand the voltage when a 30-second cycle of application of the voltage through a 1000 series resistance is repeated 1000 times in 6-minute periods. When designing the circuit, the equipment's required reliability must be considered and appropriate voltage derating must be performed. 2. Application that contain AC Voltage Special attention to the following 3 items. (1) The sum of the DC bias voltage and the positive peak value of the AC voltage should not exceed the rated voltage. (2) Reverse voltage should not exceed the allowable values of the negative peak AC voltage. (3) Ripple current should not exceed the allowable values. 3. Reverse Voltage Tantalum solid electrolytic capacitor is polarity. Please do not impress reverse voltage. As well, please confirm the potential of the tester beforehand when both ends of the capacitor are checked with the tester etc. 4. Permissible Ripple Current The permissible ripple current and voltage at about 100 kHz or higher can be determined by the following formula from the permissible power loss (Pmax value)shown in Table 1 and the specified ESR value. However, when the expected operating temperature is higher than room temperature, determine the permissible values multiplying the Pmax value by the specified multiplier (Table 2). For the permissible values at different frequencies, consult our Sales Department. 2 P=I xESR or E 2 ESR P= Z2 Permissible ripple current Permissible ripple voltage P max ESR Imax= Emax= (Arms) P max ESR xZ = Imaxx Z (Vrms) Imax : Permissible ripple current at regulated frequency (Arms : RMS value) Emax : Permissible ripple voltage at regulated frequency (Vrms : RMS value) Pmax : Permissible power loss (W) ESR : Specified ESR value at regulated frequency () Z : Impedance at regulated frequency () Table 1 Permissible power loss Case size A B C3 D3 H Table 2 Pmax multiplier at each operating temperature PmaxW 0.045 0.050 0.065 0.085 0.100 Operating temperature () 25 55 85 125 Multiplier 1.0 0.9 0.8 0.4 Note: Above values are measured at 0.8t glass epoxy board mounting in free air and may be changed depending on the kind of board, packing density, and air convection condition. Please consult us if calculated power loss value is different from above list of P max value. 5. Application on low-impedance circuit The failure rate of low impedance circuit at 0.1/V is about five times greater than that of a 1/V circuit. To curtail this higher failure rate, tantalum capacitors used in low impedance circuits, such as filters for power supplies, particularly switching power supplies, or for noise by-passing, require that operating voltage be derated to less than half of the rated voltage. Actually, less than 1/3 of the rated voltage is recommended. 6. Non Polar Application(BACK TO BACK) Tantalum capacitors can be used as a non-polar unit if two capacitors are connected "BACK-TO-BACK" when reserve voltage is applied at a more than permissible value, or in a purely AC circuit. The two capacitors should both be of the same rated voltage and capacitance tolerance, and they should both be twice the required capacitance value. + + Ripple Voltage: Permissible Ripple Voltage shall not exceed the value allowed for either C1 or C2 (This will be the same, as the capacitors should be identical.) A B C1 C2 Capacitance: (C1 x C2) / (C1 + C2) Leakage Current: If terminal A is (+), the Leakage Current will be equal to C1's Leakage Current. If terminal B is (+), the Leakage Current will be equal to C2's Leakage Current. 7. Soldering 7.1. Preheating To obtain optimal reliability and solderability conditions, capacitors should be pre-heated at 130 to 200 C for approximately 60 to 120 seconds. 7.2. Soldering The body of the capacitor shall not exceed 260 C during soldering. (1) Reflow Soldering Reflow soldering is a process in which the capacitors are mounted on a printed board with solder paste. There are two methods of Reflow Soldering: Direct and Atmospheric Heat. * Direct Heat (Hot plate) During the Direct Heat method, the capacitor has been positioned on a printed board, which is then placed upon a hot plate. The capacitor maintains a lower temperature than the substrate, which in turn stays at a lower temperature than the hot plate. * Atmospheric Heat 12 Temperature of Boards Surface a) VPS (Vapor Phase Soldering) During VPS,the substrate is heated by an inert liquid with a high boiling point. The temperature of the capacitor's body and the temperature of the substrate are about the same as the atmosphere. This temperature should be below 240C. b) Near and Far IR Ray Due to the heat absorption of the capacitor's body, the internal temperature of the capacitors may be 20 ~ 30C higher than the setting temperature and may exceed 260C. Temperature control is crucial in maintaining a temperature of 260 C or lower. c) Convention Oven An infrared ray is the main source of heat in this process. The temperature of the substrate and the capacitors can be maintained at a similar level by the circulation of heated air, or an inert gas. Pre-heat T3 T2 Reflow Cooling Temperature T1 A1 A2 Time T1=130200 A1= 60120sec. T2=220230 A260sec. T3=260 10 sec. or less than 10 Number of times2 times max.. Time (2) Soldering with a Soldering Iron Soldering with a soldering iron cannot be recommended due to the lack of consistency in maintaining temperatures and process times. If this method should be necessary, the iron should never touch the capacitor's terminals, and the temperature of the soldering iron should never exceed 350C. The application of the iron should not exceed 5 seconds. (3) Please consult us for other methods. 8. Cleaning Cleaning by organic solvent may damage capacitor's appearance and performance.However, our capacitors are not effected even when soaked at 20 ~ 30C 2-propanol for 5 minutes. When introducing new cleaning methods or changing the cleaning term, please consult us. 9. Protective Resin Coating After components are assembled to substrate, a protective resin coating is sometimes applied. As this resin coating cures, it gives mechanical and thermal stress to Tantalum capacitors. This stress can cause damage to the capacitors, which affects their reliability. Before using a resin coating, proper research must be done in regards to the material and process to insure that excessive stress will not be applied to capacitors and other components. 10. Vibration Approximately 300 G shall be applied to a capacitor, when dropped from 1 meter to a concrete floor. Although capacitors are made to withstand this drop test, stress from shock due to falling or striking does cause damage to the capacitors and increases failure rates. Do not subject capacitors to this type of mechanical stress. 11. Ultrasonic cleaning Matsuo does not recommend Ultrasonic cleaning. This may cause damage to the capacitors, and may even cause broken terminals. If the Ultrasonic cleaning process will be used, please note the following: (1)The solvent should not be boiled. (Lower the ultrasonic wave output or use solvent with The high boiling point.) (2)The recommended wattage is less than 0.5 watts per cm 2. (3)The cleaning time should be kept to a minimum. Also, samples must be swang in the solvlent. Please consult us. 12. Additional Notes * When more than one capacitor is connected in series, a resistor that can distribute the voltage equally to the capacitors shall be connected in parallel. * The capacitor cases shall not be cut even if the mounting space is insufficient. * During a customers aging process, voltage should remain under the rated voltage at all times. * Capacitors should never be touched or manipulated while operating. * Capacitors are not meant to be dismantled. * When testing capacitors, please examine the power source before conducting test to insure the tester's polarity and applied voltage. * In the event of a capacitor burning, smoking, or emitting an offensive smell during operation, please turn the circuit "off" and keep hands and face away from the burning capacitor. * If a capacitor be electrical shorted, it becomes hot, and the capacitor element may ignite. In this case, the printed board may be burnt out. * Capacitors should be stored at room temperature under low humidity. Capacitors should never be stored under direct sunlight, and should be stored in an environment containing dust. * If the capacitors will be operated in a humid environment, they should be sealed with a compound under proper conditions. * Capacitors should not be stored or operated in environments containing acids, alkalis or active gasses. * When capacitors are disposed of as "scrap" or waste, they should be treated as Industria Waste since they contain various metals and polymers. * Capacitors submitted as samples should not be used for production purposes. These application notes are prepared based on "Guideline of notabilia for fixed tantalum electrolytic capacitors with solid electrolyte for use in electronic equipment" (EIAJ RCR-2386) issued by Japan Electronics and Information Technology Industries Association (JEITA). For the details of the instructions (explanation, reasons and concrete examples), please refer to this guideline, or consult our Sales Department. R MATSUO MATSUO ELECTRIC CO., LTD. Pleas e f eel f ree t o as k o ur Sales D ep art ment f o r mo re inf ormation o n Tant alum So lid Elec t roly tic Cap ac it o r . Overseas Sales Dep. Head office URL 5-3,3-Chome,Sennari-cho,Toyonaka-shi,Osaka 561-8558,Japan Tel : 06-6332-0883 5-3,3-Chome,Sennari-cho,Toyonaka-shi,Osaka 561-8558,Japan Tel : 06-6332-0871 http://www.ncc-matsuo.co.jp/ Fax : 06-6332-0920 Fax : 06-6331-1386 Specifications on this catalog are subject to change without prior notice. Please inquire of our Sales Department to confirm specifications prior to use. 13