SPACE APPLICATIONS ONLY PHR Vishay Sfernice ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), High Stability (0.02 %) Thin Film Chip Resistors FEATURES * Load life stability at 70 C for 2000 h: 0.15 % under Pn * Low temperature coefficient down to 10 ppm/C * Very low noise (< 35 dB) and voltage coefficient (< 0.01 ppm/V) * Resistance range: 50 to 1 M (depending on size) * Laser trimmed tolerances to 0.01 % * TCR in lot tracking 5 ppm/C * Termination: Thin film technology * SnPb terminations over nickel barrier * ESCC 4001 issue 1 (generic spec) * ESCC 4001/023 issue 3 (detailed spec) These HiRel components are ideal for low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, VISHAY SFERNICE's precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y ( 10 ppm/C). DIMENSIONS A D D B C E E DIMENSIONS in millimeters CASE SIZE A MAX. TOL. + 0.64 MIN. TOL. - 0.13 B MAX. TOL. + 0.26 MIN. TOL. - 0.13 C MAX. TOL. + 0.64 MIN. TOL. - 0.13 D/E MAX. TOL. + 0.13 MIN. TOL. - 0.13 1.52 1.91 3.0 0.75 1.27 1.60 0.38 0.38 0.38 0.38 0.38 0.38 0603 0805 1206 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PHR0603Y1003BBTC0 (preferred part number format) P H R 0 TYPE TCR PHR0603 PHR0805 PHR1206 Y = 10 ppm/C (Digit 1) Z = 5 ppm/C (Digit 0) E = 25 ppm/C (Digit 2) 6 0 3 Y OHMIC VALUE The first three digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zero to follow. R designates decimal point. Example: 10R0 = 10 3901 = 3900 1004 = 1 M 1 0 0 3 B B T C TOLERANCE TERMINATION PACKAGING LEVEL (1) L = 0.01 % P = 0.02 % W = 0.05 % B = 0.10 % B: SnPb over nickel barrier G: Gold (not qualified) T: For tape and reel (3) (leave blank for waffle pack) C B Historical Part Number example: PHR 06 03 Y 1003 BB T (will continue to be accepted) Notes: (1) Level C is our standard level. Serialization, which is compulsory on Level B, is very difficult to implement. For Level B, 13 extra pieces shall be ordered for destructive TCR measurements. (2) Tape and reel not available for level B * Please see document "Vishay Green and Halogen-Free Definitions (5-2008)" http://www.vishay.com/doc?99902 Document Number: 53037 Revision: 06-Oct-08 For technical questions, contact: sfer@vishay.com www.vishay.com 63 SPACE APPLICATIONS ONLY PHR Vishay Sfernice ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), High Stability (0.02 %) Thin Film Chip Resistors GLOBAL PART NUMBER INFORMATION ESCC Code (1) 4 0 0 1 0 2 3 0 ESCC SPEC VARIANT LEVEL 4001023 0603 = 01 or 05 0805 = 02 or 06 1206 = 03 or 07 2010 = 04 or 08 Level C Level B 1 C 1 OHMIC VALUE The first three digits are significant figures and the last digit specifies the number of zero to follow. R designates decimal point. Example: 10R0 = 10 3901 = 3900 1004 = 1 M 0 0 3 B 1 TOLERANCE TCR L = 0.01 % P = 0.02 % W = 0.05 % B = 0.10 % Y = 10 ppm/C (Digit 1) Z = 5 ppm/C (Digit 0) E = 25 ppm/C (Digit 2) Note: (1) Variants 04, 05, 06, 07 and 08 are not qualified but can be produced "In accordance to ESCC 4001/023" OPTIONS LAT (Lot Acceptence Test): To be ordered separately: LAT charges + LAT samples (refer to ESCC 4001 generic specification for details of testing) LAT 1: 31 samples needed LAT 2: 25 samples needed LAT 3: 10 samples needed Final inspection: To be ordered separately STANDARD ELECTRICAL SPECIFICATIONS VISHAY SFERNICE DESIGNATION PHR 0603 PHR 0805 ESA specification applied PHR 1206 ESCC 4001/023 Variant number 01 - 05 02 - 06 03 - 07 Power rating at + 70 C (Pn) 0.1 W 0.125 W 0.25 W Limiting element voltage (UL) Ohmic value range 35 V 75 V 100 V Min. 50 Max. 200 k Min. 50 Max. 250 k Min. 50 Max. 1 M 150 V 200 V Insulation voltage (Ui) 70 V 10 ppm/C; 25 ppm/C 5 ppm/C (20 to 70 C) Temperature coefficient 0.01 % (R > 250 ), 0.02 % (R > 100 ), 0.05 %, 0.1 % Tolerance Temperature range - 55 C/+ 155 C Soldering temperature (Tsol) 260 C, immersion 10 s MECHANICAL SPECIFICATIONS PACKAGING Substrate material Two types of packaging are available: waffle-pack and tape and reel. Technology Film Protection Terminations Alumina Thin Film Nickel Chromium with mineral passivation NUMBER OF PIECES PER PACKAGE SIZE Epoxy and Silicon B type: SnPb over nickel barrier for solder reflow G type: Gold: not qualified 0603 0805 1206 WAFFLE PACK 2" x 2" 100 TAPE AND REEL MIN. MAX. 100 4000 TAPE WIDTH 8 mm 140 Notes: * Tape and reel not available for Level B www.vishay.com 64 For technical questions, contact: sfer@vishay.com Document Number: 53037 Revision: 06-Oct-08 SPACE APPLICATIONS ONLY PHR ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Vishay Sfernice High Stability (0.02 %) Thin Film Chip Resistors % RATED POWER POWER DERATING CURVE EXTENDED FEATURES You may consult VISHAY SFERNICE for chip sizes, ohmic values and tolerances outside of the qualified range. 500 250 1206 0805 125 100 0603 0 0 70 AMBIENT TEMPERATURE IN C 155 PERFORMANCE REQUIREMENTS TEST CONDITIONS TYPICAL ESA/SCC 4001/023 MIL-PRF-55342G Short time overload U = 6.25 x Pn x Rn/2s Umax. < 2 UL 0.05 % Rn + 0.05 0.10 % 0.01 % Rapid temperature change - 55 C/+ 155 C 5 cycles CEI 66-2-14 Test Na 0.05 % Rn + 0.05 0.1 % (for 100 cycles) 0.01 % 0.015 % (for 500 cycles) 260 C/10 s CEI 68-2-20 A Test T6 (met. 1A) 0.05 % Rn + 0.05 - 0.005 % CEI 115-1 Clause 4.32 CEI 115-1 Clause 4.33 0.05 % Rn + 0.05 - 0.01 % CEI 67-2-1/CEI 68-2-2 CEI 67-2-13/CEI 68-2-30 0.10 % Rn + 0.05 - 0.02 % Insulation resistance > 1 G Load life 2000 h Pn at + 70 C 90'/30' cycle 0.15 % Rn + 0.05 0.5 % 0.02 % Insulation resistance > 1 G High temperature exposure 2000 h Pn at + 155 C CEI 68-2-20A Test B 0.15 % Rn + 0.05 0.10 % (duration 100 h) 0.05 % Insulation resistance > 1 G Soldering (thermal shock) Terminal strength: adhesion bend strength of end plated facing Climatic sequence Document Number: 53037 Revision: 06-Oct-08 For technical questions, contact: sfer@vishay.com www.vishay.com 65 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1