: JEDEC DO-15, moulded plastic.
: Plated axial leads, solderable
per MIL-STD-202, Method 208.
: Colour band denotes cathode end.
: Any
: 0.41 grams (0.014 ounce)
1N5391 THRU 1N5399
1.5 AMP SILICON RECTIFIERS
VOLTAGE
50 to 1000 Volts
CURRENT
1.5 Amp
Low cost construction utilizing void - free
moulded plastic technique
Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
Diffused junction
High surge current capability
Low leakage
High temperature soldering capability :
250°C/10 seconds/9.5mm (.375in.) lead length at
2.3kg (5lb) tension
Easily cleaned with Freon, Alcohol, Chlorothene
and other similar solvents
FEATURES
MECHANICAL DATA
Case
Terminals
Polarity
Mounting Position
Weight
DIMENSIONS
- millimeters (inches)
25.4 (1.0)
min. 3.6 (.140)
2.6 (.104)
.86 (.034)
.71 (.028)
Cathode Band
25.4 (1.0)
min.
TECHNICAL SPECIFICATION
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
9.5mm (.375in.) Lead Length at TA = 75°C
V
V
A
A
Peak Forward Surge Current, 8.3 ms single half
sine - wave superimposed on rated load
µA
Storage Temperature Range
°C
°C
1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397
50
50
100
100
200
200
300
300
400
400
500
500
600
600
35 70 140 210 280 350 420
Maximum Instantaneous Forward Voltage at 1.0A
Operating Temperature Range
1.5
50
1.4
5.0
- 50 to + 175
- 50 to + 175
V
T = 100°C
Maximum Reverse Current at Rated
DC Blocking Voltage A
Typical Junction Capacitance (see Note 1)
T = 25°C
A
Typical Thermal Resistance (see Note 2)
50
°C/W
pF
V
Notes :
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal Resistance from Junction to Ambient
µA
50
VRMS
VDC
IF(AV)
IFSM
IR
TJ
TSTG
VRRM
RTHja
CJ
VF
Maximum Full load Reverse Current Full Cycle
Average, 9.5mm (.375in.) Lead Length at TL = 75°C
Symbols
30
30
IR(AV) µA
Units
nvac
DO-15
1N5398 1N5399
800
800
560
1000
1000
700
7.6 (.300)
5.8 (.230)
l
l
l
l
l
l
l
Reformatted by Anglia 9843
RATING AND CHARACTERISTIC CURVES
FIG. 1 - FORWARD CURRENT DERATING CURVE
1N5391 THRU 1N5399
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
1.6
.01
.03
0.1
10
0.4 0.6 0.8 1.0 1.2 1.4
INSTANTANEOUS FORWARD
VOLTAGE, VOLTS
0.3
1.0
3.0
30
100
TJ = 25°C
Pulse width = 300µs
2% duty cycle
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE, VOLTS
1
10
100
1 10 100
CAPACITANCE, pF
2
5
20
50
2 5 20 50
.1 .2 .5
T = 25°C
f = 1MHz
VSIG = 50mVp-p
J
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
.01
0.1
10
0 20 40 60 80 100 120
1.0
TJ = 25°C
TJ = 100°C
.03
0.3
3.0
140
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
25 50 75 100 125 150 175 200
0
0.4
0.6
0.8
1.0
0.2
AMBIENT TEMPERATURE, °C
5mm x 5mm Cu Leafs
9.5mm Lead Length
L
0
1.5
2.0
10
25
30
110 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT, AMPERES
2 5 20 50
15
20
TA = 75°C
8.3ms single half sine-wave
(JEDEC) method
5
40
50
Reformatted by Anglia 9843
