Additional Resources: Product Page | 3D Model | PCB Footprint date 06/02/2020 page 1 of 3 MODEL: PJ-012A DESCRIPTION: DC POWER JACK FEATURES * * * * 2.0 mm center pin 5.0 A rating right-angle orientation through hole SPECIFICATIONS parameter conditions/description min rated input voltage typ max 24 units Vdc rated input current 5.0 A contact resistance1 30 m 500 Vac insulation resistance at 500 Vdc voltage withstand for 1 minute 100 M insertion/withdrawal force 0.3 3 kg operating temperature -25 70 C life 5,000 flammability rating UL94V-0 RoHS yes Note: cycles 1. When measured at a current of less than 100 mA/1 kHz SOLDERABILITY parameter conditions/description hand soldering for 3~5 seconds min cuidevices.com typ max units 360 C Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices MODEL: PJ-012A DESCRIPTION: DC POWER JACK date 06/02/2020 page 2 of 3 MECHANICAL DRAWING units: mm[inches] tolerance: 0.3 mm unless otherwise noted MATERIAL PLATING center pin copper nickel terminal 1 brass silver terminal 2 titanium copper alloy silver terminal 3 brass silver plastic PBT 11.0 0.433 11.5 0.453 6.5 0.256 6.6 0.260 2.0 0.079 7.0 0.276 4.0 0.157 3.3 0.130 3.7 0.146 1.0 0.039 3.5 0.138 4.5 0.177 9.0 0.354 8.6 0.339 (2 PLCS) 1.0 0.039 (2 PLCS) 1.5 0.059 1.0 0.039 1.5 0.059 2 0.5 0.020 1 8.3 0.327 3 8.7 0.343 3.8 0.150 5.0 0.197 3 1 3.5 0.138 1.8 0.071 2 1.5 0.059 1.3 0.051 9.0 0.354 8.6 0.339 (2 PLCS) 1.00X5.90 (2 PLCS) PCB LAYOUT TOP VIEW 1 3 2 SCHEMATIC MATING PLUG Jack Insertion Depth: 6.7 mm Note: Model PJ-012A Center Pin O2.0 mm 1. All specifications measured at 10~35C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted. cuidevices.com Additional Resources: Product Page | 3D Model CUI Devices MODEL: PJ-012A DESCRIPTION: DC POWER JACK | PCB Footprint date 06/02/2020 page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 05/17/2006 1.01 brand update 06/02/2020 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com