114008 - DEUTSCH UK - Datasheet.Live

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

The Rugged, Modular Solution for

Flexible, Reliable Aerospace Connectivity

DEUTSCH

DMC-M Series

Multicavity EN4165 Connectors

DEUTSCH

DMC-M

Multicavity Connectors

Flexible Modularity

Rugged for Harsh Environments

EN4165 Compliant

Table of Contents

Introduction 4

Typical Conﬁguration 6

Speciﬁcations 7

Receptacles

Dimensional Drawings 8

Part Numbering System 10

Multi-Receptacle Plates 12

Receptacle Keying 13

Plugs

Dimensional Drawings 14

Part Numbering System 16

Plug Keying 18

Modules

Overview and Dimensions 19

Part Numbering System 22

Accessories

Shielded Accessory Bodies 27

Nonshielded Cable Clamps 29

Chimneys for Shielded Accessories 30

Masses 32

Contacts and Tooling

Electrical Contacts and Tooling 36

Fiber Optic Termini 38

Fiber Optic Tool Kits and Training 39

Panel Cutouts 40

Connector Tooling 41

User Manual 42

PAGE 4

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

MODULARITY

• Crimp and PCB contacts size 24

to size 08

• Signal, coaxial, microcoax,

Quadrax, power, optical,

thermocouple contacts

• High-speed Ethernet modules

• Aluminum cable compliant

FLEXIBLE

• Easily replaced modules for fast

reconﬁguration

• Allows mixing of male and female

modules in each connector half

• Wide range of modules allows

great ﬂexibility in input/output

conﬁgurations

WEIGHT OPTIMIZATION

• Nickel or cadmium-plated

composite shells

• Compact solution

EASY TO INSTALL

• 36 keying possibilities

• Quick-install coupling

RELIABLE

• Environmental sealing

• Vibration resistant

• EMI protection as per

EN4165 standard

• Meets FAA ammability, smoke, and

toxicity requirements

• EN4165 and BACC65 compliant

Modular, Compact, and Weight Saving

Originally designed in the 1980s, DEUTSCH DMC-M

connectors from TE Connectivity (TE) have evolved into

one of the most widely used connector styles for cabin

applications in commercial aerospace. Standardized in

European Standard EN4165, DMC-M connectors provide

a modular, exible, and reliable system. The connectors

are available in both multi-cavity and single-module

congurations, using the same modules, to provide compact,

lightweight connectivity.

Gain Flexibility

Today this connector continues to attract new users and

applications because of its modularity, space/weight

savings and robustness. In addition, it has evolved to include

composite housings, aluminum wire capability, ber optics,

higher densities, and shunting congurations.

Save Weight

The DMC-M shells are available in lightweight aluminum alloy

or composite, with nickel or cadmium plating, to withstand

harsh environments. For EMI protection, the connectors use

360° shielding on the shell interfaces.

DEUTSCH DMC-M Series

Multicavity EN4165

PAGE 5

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Space Savings

30-22 insert Purple interior

Circular Connectors

Insert 13-35

Size 22 Contacts, 5A

198 contacts

309 g (without panel)

36 mounting screws

9 panel cutouts

DMC-M Connectors

Insert 20-22

Size 22 Contacts, 5A

320 contacts

149 g (without panel)

10 mounting screws

1 panel cutout

DMC-M Connectors

Insert 30-23

Size 23 Contacts, 5A

480 contacts

175 g (without panel)

10 mounting screws

1 panel cutout

FLEXIBLE MODULARITY

PAGE 6

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TYPICAL CONFIGURATIONS

1 Modules tted with crimp contacts

2 Receptacle keying component

3 Receptacle

4 Plug keying component

5 Plug

6 Accessory in 2 halves

7 Chimneys

Wire-to-Wire Conﬁguration

1 2 3 4 5 1 66 7

1 Modules tted with PCB contacts

2 Receptacle keying component

3 Fixing panel nuts

4 Receptacle

5 Flat gasket

6 Plug keying component

7 Panel

8 Panel-mount screws

9 Plug

10 Modules tted with crimp contacts

11 Accessory in 2 halves

12 Chimneys

Wire-to-Board Conﬁguration

1 2 3 4 5 6 7 8 9 10 11 12

PAGE 7

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

MATERIALS

• Shell: Aluminum alloy or composite, with electroless nickel or

olive drab cadmium nish

• Module: Thermoplastic and uorinated silicone

• Contact: Copper alloy, plated gold over nickel

• Key: Aluminum alloy, with stainless steel lock nut

MECHANICAL/ENVIRONMENTAL

• Durability: 500 mating cycles

• Operating Temperature: -55°C to +175°C

• Module Retention In Housing: ≥ 25.4 daN (57.1 lb.)

• Contact Retention:

Size 24: 2.7 daN (6.1 lb.)

Size 23: 4.5 daN (10.1 lb.)

Size 22: 4.5 daN (10.1 lb.)

Size 20: 9.0 daN (20.2 lb.)

Size 16: 11.0 daN (24.7 lb.)

Size 12: 13.0 daN (29.2 lb.)

Size 08: 15.6 daN (35.1 lb.)

• Salt Spray:

Aluminum cadmium nish: 500 hours

Aluminum nickel nish: 96 hours

Composite nickel nish: 500 hours

ELECTRICAL

• Withstand Voltage:

At Sea Level:

Service I: 1300 Vrms 50 Hz, module size 24, 23 and 22

Service II: 1500 Vrms 50 Hz, module sizes 20, 16, 12 and 08

Altitude Immersion to 11 hPa (30,000 m/100,000 ft): 1000 Vrms 50 Hz

(all module sizes)

• Insulation Resistance

At Sea Level: ≥5000 MΩ

Altitude Immersion to 11 hPa (30,000 m/100,000 ft): ≥1000 MΩ

• Contact Current Rating (Sealed Connectors):

Size 24: 3 A

Size 23: 5 A

Size 22: 5 A

Size 20: 7.5 A

Size 16: 13 A

Size 12: 23 A

Size 08: 46 A (up to 90 A with specics contacts)

• Shielding Eectiveness:

(With conductive shell nish and RFI spring ngers)

Frequency (MHz) Attenuation, Min. (dB)

Aluminum Shell Composite Shell

100 80 65

200 78 60

300 78 55

400 77 55

800 75 45

1000 75 45

1500 59 43

2000 55 40

3000 51 37

4000 48 35

6000 45 33

10,000 40 30

SPECIFICATIONS

PAGE 8

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

STACKABLE RECEPTACLES

DMC-M 82-01: 4 Modules

SHORT STACKABLE

RECEPTACLES

DMC-M 83-01: 4 Modules

DMC-M 42-01: 2 Modules

DMC-M 43-01: 2 Modules

80 ±0.1

[3.15 ±0.004]

3.8 ±0.1

[0.15 ±0.004]

3.3 ±0.1

[0.13 ±0.004]

81 ±0.1

[3.189 ±0.004]

5.05 ±0 .1

[0.199 ±0.004]

49.5 ±0.1

[1.949 ±0.004]

50.5 ±0.1

[1.988 ±0.004]

15.25

[0.6]

MAX.

86 .1

[3.39]

MAX.

[0.157 ]

MAX.

55.6

[2.189]

MAX.

2 oblong holes

Ø 3.2 ±0.05

[0.126 ±0.002]

2 times

19 .15

[0.754]

MAX.

26.8

[1.055]

MAX.

55.6

[2.189]

MAX.

3.8 ±0.1

[0.15 ±0.004]

3.3 ±0.1

[0.13 ±0.004]

[0.157 ]

MAX.

2 oblong holes

49.5 ±0.1

[1.949 ±0.004]

50.5 ±0.1

[1.988 ±0.004]

5.05 ±0 .1

[0.199 ±0.004]

86 .1

[3.39]

MAX.

Ø 3.2 ±0.05

[0.126 ±0.002]

2 times

19 .15

[0.754]

MAX.

23.1

[0.909]

MAX.

80 ±0.1

[3.15 ±0.004]

81 ±0.1

[3.189 ±0.004]

15.25

[0.6]

MAX.

RECEPTACLES

Note: No accessory can be mounted on the rear of short receptacle shell.

PAGE 9

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

FLANGE-MOUNT

RECEPTACLES

DMC-M 84-01: 4 Modules

SHORT FLANGE-MOUNT

RECEPTACLES

DMC-M 85-01: 4 Modules

DMC-M 44-01: 2 Modules

DMC-M 45-01: 2 Modules

Note: No accessory can be mounted on the rear of short receptacle shell.

DMC-MD shielded versions are delivered with a conductive flat gasket (part no. 108-0019-00 A1142 for 4-module receptacles and 108-0019-01 A1142

for 2-module receptacles). A sealing flat gasket (part no. 108-0019-00 for 4-module receptacles and 108-0019-01 for 2-module receptacles) is also

available but not supplied with receptacles.

[0.157 ]

MAX.

57.5

[2.264]

MAX.

5.05 ±0 .1

[0.199 ±0.004]

[3.465]

MAX.

19 .15

[0.754]

MAX.

26.8

[1.055]

MAX.

80 ±0.1

[3.15 ±0.004]

81 ±0.1

[3.189 ±0.004]

26.8

[1.055]

MAX.

3.8 ±0.1

[0.15 ±0.004]

3.3 ±0.1

[0.13 ±0.004]

2 oblong holes

49.5 ±0.1

[1.949 ±0.004]

50.5 ±0.1

[1.988 ±0.004]

5.05 ±0 .1

[0.199 ±0.004]

[3.465]

MAX.

19 .15

[0.754]

MAX.

23.6

[0.929]

MAX.

[0.157 ]

MAX.

57.5

[2.264]

MAX.

80 ±0.1

[3.15 ±0.004]

81 ±0.1

[3.189 ±0.004]

20.4

[0.803]

MAX.

3.8 ±0.1

[0.15 ±0.004]

3.3 ±0.1

[0.13 ±0.004]

2 oblong holes

49.5 ±0.1

[1.949 ±0.004]

50.5 ±0.1

[1.988 ±0.004]

RECEPTACLES

PAGE 10

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM DMC-MD 84 B 3 5 W 01 ****

CONNECTOR TYPE

DMC-M Standard

DMC-MD Shielded

HOUSING TYPE

Two-Module Receptacle

42 Standard

43 Short

44 Flange Mount Standard

45 Flange Mount Short

Four-Module Receptacle

82 Standard

83 Short

84 Flange Mount Standard

85 Flange Mount Short

SHELL DELIVERY CONFIGURATION (Optional)

Omit for Standard Keying Component Not Mounted

A Without Keying Component

B With Keying Component Coded, Mounted or Not Mounted

KEYING COMPONENT TYPE (Optional: B Conﬁguration Only)

0 Type 0 (Black)

1 Type 1 (Purple)

2 Type 2 (Yellow)

3 Type 3 (Green)

4 Type 4 (Blue)

5 Type 5 (Orange)

6 Type 6 (White)

KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)

Omit - Not mounted

1, 2, 3, 4, 5, 6

PLATING/FINISH (Optional)

Aluminum Alloy Shell

Omit - Black Nickel

W Olive Drab Cadmium

Composite Shell

M Nickel (Shell Types 82 and 83 Only)

J Olive Drab Cadmium (Shell Types 82 and 83 Only)

ISSUE

MODIFICATIONS (Optional)

A1064 Bright Nickel Finish

Consult TE for additional modications

RECEPTACLES

Keying Component Orientation

Viewed from front face of receptacle housing

Largest keyway indicates orientation

Keying Component Orientation

Viewed from front face of plug housing

Largest keyway indicates orientation

PAGES 9 and 10

PAGES 15 and 16

5 6

PAGE 11

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

EN4165 PART NUMBERING SYSTEM EN4165 W 7 A 4 3 5

CONNECTOR TYPE

EN4165

PLATING/FINISH (Optional)

Aluminum Alloy Shell

F Black Nickel

W Olive Drab Cadmium

Composite Shell

M Nickel (EN4165*0A4** Only)

J Olive Drab Cadmium (EN4165*0A4** Only)

HOUSING TYPE

0 Receptacle Housing

7 Flange-Mount Receptacle Housing

SERIES

A Series 2

B Series 3 (Consult TE)

COMPOSITION

2 2 Modules

4 4 Modules

KEYING COMPONENT TYPE

A Standard Keying Component (Black)

0 Without Keying Component

1 Type 1 (Purple)

2 Type 2 (Yellow)

3 Type 3 (Green)

4 Type 4 (Blue)

5 Type 5 (Orange)

6 Type 6 (White)

KEYING COMPONENT ORIENTATION IN THE RECEPTACLE

0 Not mounted

1, 2, 3, 4, 5, 6

RECEPTACLES

Keying Component Orientation

Viewed from front face of receptacle housing

Largest keyway indicates orientation

Keying Component Orientation

Viewed from front face of plug housing

Largest keyway indicates orientation

PAGES 9 and 10

PAGES 15 and 16

5 6

PAGE 12

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM DMC-MD 0484 A W 01 A

CONNECTOR TYPE

DMC-M Standard

DMC-MD Shielded (Includes Conductive Gasket)

SIZE/CAPACITY

1044 52 modules (13 rows)

0964 48 modules (12 rows)

0804 40 modules (10 rows)

0644 32 modules (8 rows)

0484 24 modules (6 rows)

0324 16 modules (4 rows)

0244 12 modules (3 rows)

0164 8 modules (2 rows)

Consult TE for other sizes

KEYING COMPONENT (Optional)

Omit - With Keying Component

A Without Keying Component

PLATING/FINISH (Optional)

Aluminum Alloy Shell

Omit - Black Nickel

W Olive Drab Cadmium

ISSUE

TYPE (Optional)

Omit - Standard Plate

A Short Plate (No Backshell Mount)

STANDARD PLATE SHORT PLATE

These multi-receptacle plates receive 4-module rack and panel plugs or free plugs.

No accessory can be mounted on the rear of the lightweight multi-receptacle versions.

No. of Rows 13 12 10 8 6 4 3 2

Version 1044 0964 0804 0644 0484 0324 0244 0164

Dim A 232.2

(9.142)

216.2

(8.512)

184.2

(7.252)

152.2

(5.992)

120.2

(4.732)

68.6

(2.701)

52.6

(2.071)

36.6

(1.437)

MULTI-RECEPTACLE PLATES

Dimensions are mm (inches)

3.7 ±1

[0.146

±0.039]

3.5 ±1

[0.138

±0.039]

8.85

[.348]

5.15

[0.283] 98.2

[3.866]

[0.630]

98.2

[3.866]

8.85

[.348]

5.15

[0.283]

[0.630]

3.5 ±1

[0.138

±0.039]

9.2 ±1

[0.362

±0.039]

PAGE 13

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

DMC-M receptacles use keying components to allow 6 mating

possibilities. An additional 6 keying orientations are possible

providing a total of 36 keying options thereby preventing connector

misalignment and mismating. Keying is especially useful for rack and

multiconnector applications. The keys are provided in sealed and

unsealed versions.

Type 01 02 03 04 05 06 10

TE (Standard) 732-8021-01 B 732-8021-02 B 732-8021-03 B 732-8021-04 B 732-8021-05 B 732-8021-06 B 732-8021-10 B

EN4165 EN4165R01 EN4165R02 EN4165R03 EN4165R04 EN4165R05 EN4165R06 EN4165R10

Type 01 02 03 04 05 06 10

TE (Sealed) 732-8174-01 732-8174-02 732-8174-03 732-8174-04 732-8174-05 732-8174-06 732-8174-10

The assembly coupling mechanism requires the use of the tool part no. 057-0590-80. It is delivered with a removable lock nut

(coupling torque 0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.]).

01 02 03 04 05 06 10

Violet Yellow Green Blue Orange White Standard Lock nut

732-8021-01 B

CD9

732-8021-02 B

CD9

732-8021-03 B

CD9

732-8021-04 B

CD9

732-8021-05 B

CD9

732-8021-06 B

CD9

732-8021-10 B

CD9

RECEPTACLE KEYING

732-8174-10

CD9

732-8021-10 B

CD9

TE (Standard)

EN4165

TE (Sealed)

(Not EN4165)

O-Ring

732-8174-10

CD9

732-8021-10 B

CD9

TE (Standard)

EN4165

TE (Sealed)

(Not EN4165)

O-Ring

Sealed Keying

Unsealed EN4165-Compliant Keying

PAGE 14

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

FREE PLUGS

DMC-M 80-01: 4 Modules

RACK AND PANEL PLUGS

DMC-M 88-01: 4 Modules

DMC-M 40-01: 2 Modules

DMC-M 48-01: 2 Modules

See page 40 for panel cutouts.

The receptacle/plug coupling is done with the tool 057-0592-80 or a standard Allen wrench (coupling torque 0.1 ±0.03 daN.m [8.8 ±2.6 in. lbf.]).

1.3

[0.051]

MAX.

Ø 5.2

[0.205]

MAX.

28 .1

[1.106]

MAX.

15 .1

[0.594]

MAX.

3.05 [0.594] Width across flats

Hexagon socket

6.7

[0.264]

MAX.

75.1

[2.957]

MAX.

44.60

[1.756]

MAX.

15 .1

[0.594]

MAX.

[3.583]

MAX.

60.5

[2.382]

MAX.

2 .1

[0.083]

MAX.

28 .1

[1.106]

MAX. 30

[1.181]

MAX.

[0.236]

MAX.

PLUGS

PAGE 15

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

REVERSE RACK AND

PANEL PLUGS

DMC-M 89-01: 4 Modules

DMC-M 49-01: 2 Modules

See page 40 for panel cutouts.

PAGE 15

See page 40 for panel cutouts.

28.1

[1.106]

MAX.

DMC-M 49-01

CD9

DMC-M 89-01

CD9

123

BCADAB

28.1

[1.106]

MAX.

6.5

[0.256]

MAX.

6.5

[0.256]

MAX.

34.7

[1.366]

MAX.

34.7

[1.366]

MAX.

[3.465]

MAX.

57.5

[2.264]

MAX.

PLUGS

PAGE 16

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM DMC-MD 89 B 3 5 W 01 ****

CONNECTOR TYPE

DMC-M Standard

DMC-MD Shielded

HOUSING TYPE

Two-Module Receptacle

40 Free Plug

48 Rack and Panel Plug

49 Reversed Rack and Panel Plug

Four-Module Receptacle

80 Free Plug

88 Rack and Panel Plug

89 Reversed Rack and Panel Plug

SHELL DELIVERY CONFIGURATION (Optional)

Omit for Standard Keying Component Not Mounted

A Without Keying Component

B With Keying Component Coded, Mounted or Not Mounted

KEYING COMPONENT TYPE (Optional: B Conﬁguration Only)

0 Type 0 (Black)

1 Type 1 (Purple)

2 Type 2 (Yellow)

3 Type 3 (Green)

4 Type 4 (Blue)

5 Type 5 (Orange)

6 Type 6 (White)

KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)

Omit - Not Mounted

1, 2, 3, 4, 5, 6

PLATING/FINISH (Optional)

Aluminum Alloy Shell

Omit - Black Nickel

W Olive Drab Cadmium

Composite Shell

M Nickel (Shell Type 80 Only)

J Olive Drab Cadmium (Shell Type 80 Only)

ISSUE

MODIFICATIONS (Optional)

A1064 Bright Nickel Finish

Consult TE for additional modications

PLUGS

Keying Component Orientation

Viewed from front face of receptacle housing

Largest keyway indicates orientation

Keying Component Orientation

Viewed from front face of plug housing

Largest keyway indicates orientation

PAGES 9 and 10

PAGES 15 and 16

5 6

PAGE 17

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

EN4165 PART NUMBERING SYSTEM EN4165 W 9 A 4 R 3 5

CONNECTOR TYPE

EN4165

PLATING/FINISH)

Aluminum Alloy Shell

F Black Nickel

W Olive Drab Cadmium

Composite Shell

M Nickel (EN4165*6A4** Only)

J Olive Drab Cadmium (EN4165*6A4** Only)

HOUSING TYPE

6 Free Plug

9 Rack and Panel Plug

SERIES

A Series 2

B Series 3 (Consult TE)

SIZE

2 2 Modules

4 4 Modules

RACK AND PANEL ORIENTATION (Optional)

Omit - Standard

R Reversed

KEYING COMPONENT TYPE (B Conﬁguration Only)

A Standard Keying Component (Black)

0 Without Keying Component

1 Type 1 (Purple)

2 Type 2 (Yellow)

3 Type 3 (Green)

4 Type 4 (Blue)

5 Type 5 (Orange)

6 Type 6 (White)

KEYING COMPONENT ORIENTATION IN THE RECEPTACLE

0 Not Mounted

1, 2, 3, 4, 5, 6

PLUGS

Keying Component Orientation

Viewed from front face of receptacle housing

Largest keyway indicates orientation

Keying Component Orientation

Viewed from front face of plug housing

Largest keyway indicates orientation

PAGES 9 and 10

PAGES 15 and 16

5 6

PAGE 18

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

DMC-M plugs use an optional keying component to allow 6 mating

possibilities. An additional 6 keying orientations are possible

providing a total of 36 keying options thereby preventing connector

misalignment and mismating. Keying is especially useful for rack and

multiconnector applications.

The assembly of these keys is toolless. Once clipped into their cavities,

keys must be broken to be removed.

VioletYellow Green Blue Orange White Standard

01 02 03 04 05 06 10

732-8020-01

732-8020-03

CD9

732-8020-02

CD9

732-8020-04

732-8020-05

732-8020-06

732-8020-10

CD9

Type 01 02 03 04 05 06 10

TE 732-8020-01 732-8020-02 732-8020-03 732-8020-04 732-8020-05 732-8020-06 732-8020-10

EN4165 EN4165P01 EN4165P02 EN4165P03 EN4165P04 EN4165P05 EN4165P06 EN4165P10

PLUG KEYING

PAGE 19

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Arrangement Configuration

Pin Contacts Socket Contacts

View Part No. View Part No.

30-23 30 Contacts, Size 23 DMC-MR 30-23 AN DMC-MR 30-23 BN

20-22 20 Contacts, Size 22

DMC-M 20-22 AN

BACI10BC2022PNB

EN4165A20-221NA

DMC-M 20-22 BN

BACI10BC2022SNB

EN4165A20-221NB

20-22* 20 Contacts, Size 22 DMC-MA 20-22 AN

EN4165A20A221NA

DMC-MA 20-22 BN

EN4165A20A221NB

12-20 12 Contacts, Size 20

DMC-M 12-20 AN

BACI10BC1220PNB

EN4165A12-201NA

DMC-M 12-20 BN

BACI10BC1220SNB

EN4165A12-201NB

08-16 8 Contacts, Size 16

DMC-M 08-16 AN

BACI10BC0816PNB

EN4165A08-161NA

DMC-M 08-16 BN

BACI10BC0816SNB

EN4165A08-161NB

04-12 4 Contacts, Size 12 DMC-M 04-12 AN

EN4165A04-121NA

DMC-M 04-12 BN

EN4165A04-121NB

01-08 1 Contact, Size 08 DMC-M 01-08 AN

EN4165A01-081NA

DMC-M 01-08 BN

EN4165A01-081NB

99-01 6 Contacts, Size 16

5 Contacts, Size 22

DMC-M 99-01 AN

BACI10BC1622PNB

EN4165A99-011NA

DMC-M 99-01 BN

BACI10BC1622SNB

EN4165A99-011NB

99-01* 6 Contacts, Size 16

5 Contacts, Size 22

DMC-MA 99-01 AN

EN4165A99A011NA

DMC-MA 99-01 BN

EN4165A99A011NB

99-06 8 Contacts, Size 22

2 Contacts, Size 12

DMC-M 99-06 AN

BACI10BC1001PNB

DMC-M 99-06 BN

BACI10BC1001SNB

99-10 8 Contacts, Size 20

2 Contacts, Size 16

DMC-M 99-10 AN

EN4165A99-101NA

DMC-M 99-10 BN

EN4165A99-101NB

ELECTRICAL MODULES / AS39029/57 AND /58 AND EN3155 CONTACT COMPLIANT

* DMC-MA connector modules are compatible

with aluminium cable contacts and with

EN3155-070 / 071 size 22 contacts (for copper cable)

DEUTSCH Part Numbers (DMC-M)

BACI10BC Part Numbers

EN4165 Part Numbers

Aluminium cable technology possible

with size 22 contacts

MODULES

Arrangement Configuration

Pin Contacts Socket Contacts

View Part No. View Part No.

99-10 8 Size 20 Contacts

2 Size 16 Contacts

DMC-MB 99-10 AN

BACI10BC0910PNB

DMC-MB 99-10 BN

BACI10BC0910SNB

12-20 12 Size 20 Contacts DMC-MB 12-20 AN

BACI10BC1220APNB

DMC-MB 12-20 BN

BACI10BC1220ASNB

ELECTRICAL MODULES / BACC47 CONTACT COMPLIANT

PAGE 20

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Configuration View Part No.

Blanking Module DMC-M 00-00 PN

EN4165-1N

Arrangement Configuration View Part No.

22-05 20 Contacts, Size 22

5 Shunts 4 Ways

DMC-M 22-05 BN

EN4165A20Y221NB

22-07

20 Contacts, Size 22

3 Shunts 4 Ways

4 Shunts 2 Ways

DMC-M 22-07 BN

EN4165A2AY221NB

22-10 20 Contacts, Size 22

10 Shunts 2 Ways

DMC-M 22-10 BN

EN4165A2BY221NB

BLANKING MODULES SHUNT MODULES

Distribution shunt modules use dedicated contacts based on

standard AS39029. The shunt modules can only be mated with

DMC-M 20-22 AN or DMC-MA 20-22 AN modules.

DEUTSCH Part Numbers (DMC-M)

BACI10BC Part Numbers

EN4165 Part Numbers

Arrangement Configuration

Pin Contacts Socket Contacts

View Part No. View Part No.

16-02

6 Contacts, Size 16

2 Contacts, Size 22

8 Contacts, Size 24

2226454-1

DMC-M 16-02 AN

266455-1

DMC-M 16-02 BN

99-02 8 Contacts, Size 22

3 Contacts, Size 20 DMC-M 99-02 AN DMC-M 99-02 BN

99-03 8 Contacts, Size 20

8 Contacts, Size 24 DMC-M 99-03 AN DMC-M 99-03 BN

99-04

6 Contacts, Size 20

2 Contacts, Size 22

8 Contacts, Size 24

DMC-M 99-04 AN DMC-M 99-04 BN

HIGH-SPEED ETHERNET MODULES

Arrangement Configuration

Pin Contacts Socket Contacts

View Part No. View Part No.

01-09 1 Quadrax Contact DMC-M 01-08 AN-GQ

EN4165A01Q281NA

DMC-M 01-08 BN-GQ

EN4165A01Q281NB

QUADRAX MODULES

MODULES

Arrangement Configuration

Pin Contacts

View Part No.

08-16 8 Size 16 Contacts DMC-M 08-16 AN-G

EN4165A08G161NA

04-12 4 Size 12 Contacts DMC-M 04-12 AN-G

EN4165A04G121NA

01-08 1 Size 08 Contact DMC-M 01-08 AN-G

EN4165A02G081NA

DMC-M 01-08 BN-G

EN4165A02G081NB

GROUNDING MODULES

PAGE 21

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Module Dimensions (Except Fiber Optic Modules)

SERIES 2 MODULES

Polarization Keys

(Module viewed from front face)

L2 MAX.

14.1

[0.555]

[0.591]

L1 MAX.

14.1

[0.555]

[0.591]

Modules for Contact Size L1 (Short) L2 (Long)

24, 23, 22, 20, 16, 12 16.46 (0.648) 22.40 (0.882)

08 18.70 (0.736) 33.20 (1.307)

Module extraction is done with the tool part no. 057-0289-00 A or B.

The module insertion into the plug or receptacle is done manually.

NA BCD

NNNNN

Each module can have a specific polarization key A, B, C or D. The polarized modules must

be installed in a similarly polarized shell cavity. N-keyed modules will fit into all shells.

MODULES

Configuration

Module Part No.

Alignment Sleeve

Pin Part No. Socket Part No.

6 MC5

Termini 458235 458238 458237-C (Ceramic)

458237-M (Metal)

1 MT Ferrule

(12 or 24 Fibers) DMC-M01-MC6N DMC-M01-MC6N Not required

2 ARINC 801 Termini

5 Contacts, Size 16

2 Contacts, Size 22

459736

459736-P (With Contacts)

459823 (Right Angle)

459737 (Ceramic Sleeve)

459737-S (Ceramic Sleeve with Contacts)

459737-M (Metal Sleeve)

459737-M-S (Metal Sleeve with Contacts)

Included with

socket module

FIBER OPTIC AND HYBRID MODULES

PAGE 22

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM DMC-M 20-22 A N E

Standard Modules

CONNECTOR TYPE

DMC-M

ARRANGEMENT

See Pages 19 - 21

CONTACTS*

P Standard Male Contact

S Standard Female Contact

A Without Male Contact

B Without Female Contact

C Male Contact, Enlarged Crimp Barrel

D Female Contacts, Enlarged Crimp Barrel

POLARIZATION

N, A, B, C, D

SEALING (Optional)

Omit - Standard (No Sealing)

E Sealed

MODULES

EN4165 PART NUMBERING SYSTEM EN4165 A 20-22 2 N A

Standard Modules

CONNECTOR TYPE

EN4165

MODULE SERIES

A Series 2

B Series 3 (Consult TE)

ARRANGEMENT

See Pages 19 - 21

SEALING

1 Unsealed

2 Sealed

POLARIZATION

N, A, B, C, D

CONTACTS*

F Standard Female Contact

M Standard Male Contact

A Without Male Contact

B Without Female Contact

C Male Contact, Enlarged Crimp Barrel

D Female Contacts, Enlarged Crimp Barrel

*Standard contacts compliant with AS39029 and EN3155

PAGE 23

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

MODULES

TE PART NUMBERING SYSTEM DMC-MA 20-22 A N

Aluminum Cable Compliant Modules

CONNECTOR TYPE

DMC-MA

ARRANGEMENT

20-22

99-01

CONTACTS

A Without Male Contact

B Without Female Contact

POLARIZATION

N, A, B, C, D

EN4165 PART NUMBERING SYSTEM EN4165 A 20A22 1 N A

Aluminum Cable Compliant Modules

CONNECTOR TYPE

EN4165

MODULE SERIES

A Series 2

B Series 3 (Consult TE)

ARRANGEMENT

20A22

99A01

SEALING

1 Unsealed

POLARIZATION

N, A, B, C, D

CONTACTS

A Without Male Contact

B Without Female Contact

Note: DMC-MA connector modules are compatible with aluminum cable contacts and with EN4165-070/071 size 22 contacts for copper cable.

PAGE 24

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM DMC-M 01-08 B N - G W

Grounding Modules

CONNECTOR TYPE

DMC-M

MODULE TYPE

01-08

04-12

08-16

CONTACTS

P Standard Male Contact

S Standard Female Contact

A Without Male Contact

B Without Female Contact

POLARIZATION

N, A, B, C, D

GROUNDING

PLATING/FINISH (Optional)

Aluminum Alloy

Omit - Black Nickel

W Olive Drab Cadmium

MODULES

EN4165 PART NUMBERING SYSTEM EN4165 A 01G 08 2 N B

Grounding Modules

CONNECTOR TYPE

EN4165

MODULE SERIES

A Series 2

B Series 3 (Consult TE)

ARRANGEMENT

01G08

04G12

08G16

SEALING

1 Unsealed

2 Sealed

POLARIZATION

N, A, B, C, D

CONTACTS

F Standard Female Contact

M Standard Male Contact

A Without Male Contact

B Without Female Contact

C Male Contact, Enlarged Crimp Barrel

D Female Contacts, Enlarged Crimp Barrel

PAGE 25

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

EN4165 PART NUMBERING SYSTEM EN4165 A 01Q28 2 N B

Quadrax Modules

FAMILY

EN4165

MODULE SERIES

A Series 2

B Series 3 (Consult TE)

ARRANGEMENTS

1Q28

SEALING

1 Unsealed

2 Sealed

POLARIZATION

N, A, B, C, D

CONTACTS

A Without Male Contact

B Without Female Contact

MODULES

TE PART NUMBERING SYSTEM DMC-M 01-08 B N G Q W

Quadrax Modules

CONNECTOR TYPE

DMC-M

ARRANGEMENT

01-08 Only

CONTACT TYPE

A Without Male Contact

B Without Female Contact

POLARIZATION

N, A, B, C, D

GROUNDING

QUADRAX

PLATING/FINISH (Optional)

Aluminum Alloy

Omit - Black Nickel

W Olive Drab Cadmium

–

PAGE 26

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

MODULES

TE PART NUMBERING SYSTEM DMC-M 22-05 B N

Shunt Modules

CONNECTOR TYPE

DMC-M

ARRANGEMENTS

22-05 5 Shunts 4 Ways

22-07 3 Shunts 4 Ways and 4 Shunts 2 Ways

22-10 10 Shunts 2 Ways

CONTACT TYPE

S Female Contact

B Without Female Contact

POLARIZATION

N, A, B, C, D

EN4165 PART NUMBERING SYSTEM EN4165 A 20Y22 1 N B

Shunt Modules

FAMILY

EN4165

MODULE SERIES

A Series 2

B Series 3 (Consult TE)

ARRANGEMENTS

20Y22 5 Shunts 4 Ways

2AY22 3 Shunts 4 Ways and 4 Shunts 2 Ways

2BY22 10 Shunts 2 Ways

SEALING

1 Unsealed

POLARIZATION

N, A, B, C, D

CONTACT TYPE

B Without Female Contact

F With Female Contact

PAGE 27

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

SHIELDED ACCESSORY BODIES

732-8054-10 A: 4 Modules 732-8054-14 A: 2 Modules

TE PART NUMBERING SYSTEM 732 8052 00 W A

FAMILY

732

TYPE (Used With)

8052 Free Plug

8053 Rack and Panel Plug

8054 Receptacle

SHELL

Two-Module Accessory

01 2 Round Chimneys

14 No Chimney

Four-Module Accessory

00 4 Round Chimneys

10 No Chimney

PLATING/FINISH (Optional)

Aluminum Alloy Body

Omit - Black Nickel

W Olive Drab Cadmium

Composite Body

M Nickel (For Shell Types 00 and 10 Only)

J Olive Drab Cadmium (For Shell Types 00 and 10 Only)

ISSUE

15.2

[0.598]

MAX.

[2.953]

MAX.

2 7. 2

[1.071]

MAX.

32.2

[1.268]

MAX.

Ø 11. 05

[0.435]

MAX.

14.2

[0.559]

MAX.

4.1

[0.161]

MAX.

Ø 11. 05

[0.435]

MAX.

30 .1

[1.185]

MAX.

14.2

[0.559]

MAX.

4.1

[0.161]

MAX.

15.2

[0.598]

MAX.

44.50

[1.752]

MAX.

32.2

[1.268]

MAX.

ACCESSORIES

– –

PAGE 28

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

EN PART NUMBERING SYSTEM EN4165 F 14 P 4

FAMILY

EN4165

PLATING/FINISH

Aluminum Alloy Body

F Black Nickel

W Olive Drab Cadmium

Composite Body

M Nickel (For Shell Types P4 and R4 Only)

J Olive Drab Cadmium (For Shell Types P4 and R4 Only)

BODY

14 Shielded Accessory Body

TYPE (Used With)

P Free Plug

R Receptacle and Rack and Panel Plug

SHELL

2 2 Modules

4 4 Modules

ACCESSORIES

PAGE 29

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

NONSHIELDED CABLE CLAMPS

732-8002-00: 4 Modules 732-8002-01: 2 Modules

TE PART NUMBERING SYSTEM 732 8002 00 W

FAMILY

732

MATERIAL

8002 Metal

8040 PEI Plastic

SIZE

00 4 Module (Metal)

00A 4 Module (PEI)

01 2 Module (Metal and PEI)

PLATING/FINISH (Optional: Metal Clamps Only)

Omit - Black Nickel

W Olive Drab Cadmium

EN PART NUMBERING SYSTEM EN4165 F 13 A 4

FAMILY

EN4165

PLATING/FINISH

F Black Nickel

W Olive Drab Cadmium

TYPE

13 Cable Clamp

SERIES

A Series 2

B Series 3 (Consult TE)

SIZE

2 2 Modules

4 4 Modules

[1.299]

MAX.

2 7. 2

[1.071]

MAX.

4.1

[0.161]

MAX.

[0.236]

MAX.

15.2

[0.598]

MAX.

44.5

[1.752]

MAX.

Ø 12

[0.472]

MAX.

[2.953]

MAX.

[0.945]

MAX.

ACCESSORIES

– –

PAGE 30

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

14.55

[0.573]

MAX.

29.3

[1.154]

MAX.

23.7

[0.933]

MAX.

8.87

[0.349]

MIN.

11.8 3

[0.466]

MAX.

R = 5.0 ±0.3

[0.197 ±0.012]

9.0 ±0.2

[0.354 ±0.008]

15.5 ±0.3

[0.61 ±0.012]

18.5

[0.711]

MAX.

1.1

[0.043]

MAX.

13.1

[0.516]

MAX.

26.6

[1.047]

MAX.

Ø 9.45

[0.372]

MIN.

Ø 14.3

[0.563]

MAX.

5.0

[0.197]

MAX.

1.1

[0.043]

MAX.

18.05

[0.711]

MAX.

13.1

[0.516]

MAX.

1.1

[0.043]

MAX.

9.1

[0.358]

MAX.

Ø 9.45

[0.372]

MIN.

Ø 14.3

[0.563]

MAX.

Ø 10.55

[0.412]

MAX.

Ø 11.05

[0.435]

MAX.

CHIMNEYS FOR SHIELDED ACCESSORIES

732-8052-12 A: Double Oval Chimney (1 for 2 cavities, for 4-module accessories only)

732-8052-11 A:

Round Chimney (1 per cavity)

732-8052-13 A:

Blank Chimney (1 per cavity)

ACCESSORIES

PAGE 31

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TE PART NUMBERING SYSTEM 732-8052 11 W A

FAMILY

732-8052

TYPE

11 Round Chimney

12 Double Oval Chimney

13 Blank Chimney

18 Anti-Rotational Round Chimney

19 Anti-Rotational Round Chimney with Tie Wrap Option

PLATING/FINISH

Omit for Black Nickel

W Olive Drab Cadmium

ISSUE

EN PART NUMBERING SYSTEM EN4165 16 F

STANDARD

EN4165

TYPE

15 Round Chimney

15A Anti-Rotational Round Chimney with Tie Wrap Option

16 Double Oval Chimney

17 Blank Chimney

PLATING/FINISH

F Black Nickel

W Olive Drab Cadmium

ACCESSORIES

–

732-8052-18 A : Anti-Rotation Round Chimney 732-8052-19 A: Ani-Rotation Round Chimney with

Tie Wrap Option

CD-9-732-8052-19A

CD9-732-8052-18A

Ø10.55

[0.415]

MAX.

Ø14.3

[0.563]

MAX.

13.1

[0.516]

MAX.

Ø11.05

[0.435]

9.1

[0.358]

MAX.

1.1

[0.043]

MAX. Ø9.45

[0.372]

MIN.

18.4

[0.724]

MAX.

13.1

[0.516]

MAX.

1.1

[0.043]

MAX. Ø9.45

[0.372]

MIN.

Ø11.05

[0.435]

Ø14.3

[0.563]

MAX.

9.1

[0.358]

MAX.

Ø10.55

[0.415]

MAX.

0.75

[0.030]

[0.787]

MAX. 24.3

[0.957]

MAX.

[0.433]

MAX.

[0.433]

MAX.

CHIMNEYS FOR SHIELDED ACCESSORIES

732-8052-18 A:

Anti-Rotational Round Chimney

732-8052-19 A

Anti-Rotational Round Chimney with Tie Wrap Option

PAGE 32

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Receptacles

Multi-Receptacle Housings

Plugs

Receptacle Keying Component

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

2-Module Plugs

Free Hanging (Aluminum) DMC-M 40 A 01 EN4165F6A200 DMC-M 40 AW 01 EN4165W6A200 22 14

Rack and Panel DMC-M 48 A 01 EN4165F9A200 DMC-M 48 AW 01 EN4165W9A200 33 14

Reversed Rack and Panel DMC-M 49 A 01 EN4165F9A2R00 DMC-M 49 AW 01 EN4165W9A2R00 33 15

4-Module Plugs

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

Free Hanging (Aluminum) DMC-M 80 A 01 EN4165F6A400 DMC-M 80 AW 01 EN4165W6A400 22 14

Free Hanging (Composite) DMC-MD 80 AM EN4165M6A400 DMC-MD 80 AJ EN4165J6A400 19 14

Rack and Panel DMC-M 88 A 01 EN4165F9A400 DMC-M 88 AW 01 EN4165W9A400 38 14

Reversed Rack and Panel DMC-M 89 A 01 EN4165F9A4R00 DMC-M 89 AW 01 EN4165W9A4R00 38 15

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

2-Module Receptacles

Standard DMC-M 42 A 01 EN4165F0A200 DMC-M 42 AW 01 EN4165W0A200 17 8

Short DMC-M 43 A 01 — DMC-M 43 AW 01 — 15 8

Flange Mount DMC-M 44 A 01 EN4165F7A200 DMC-M 44 AW 01 EN4165W7A200 22 9

Short, Flange Mount DMC-M 45 A 01 — DMC-M 45 AW 01 — 21 9

4-Module Receptacles

Standard (Aluminum) DMC-M 82 A 01 EN4165F0A400 DMC-M 82 AW 01 EN4165W0A400 22 8

Standard (Composite) DMC-MD 82 AM 01 EN4165M0A400 DMC-MD 82 AJ 01 EN4165J0A400 15 8

Short (Aluminum) DMC-M 83 A 01 — DMC-M 83 AW 01 — 20 8

Short (Composite) DMC-MD 83 AM 01 — DMC-MD 83 AJ 01 — 14 8

Flange Mount DMC-M 84 A 01 EN4165F7A400 DMC-M 84 AW 01 EN4165W7A400 28 9

Short, Flange Mount DMC-M 85 A 01 — DMC-M 85 AW 01 — 27 9

Size (No. of Modules) Type TE Part No. Mass (g) Page

8Standard DMC-M 0164-01 98 12

Lightweight DMC-M 0164-01 A 55 12

12 Standard DMC-M 0244-01 127 12

Lightweight DMC-M 0244-01 A 75 12

16 Standard DMC-M 0324-01 156 12

Lightweight DMC-M 0324-01 A 95 12

24 Standard DMC-M 0484-01 214 12

Lightweight DMC-M 0484-01 A 131 12

32 Standard DMC-M 0644-01 273 12

Lightweight DMC-M 0644-01 A 171 12

40 Standard DMC-M 0804-01 331 12

Lightweight DMC-M 0804-01 A 211 12

48 Standard DMC-M 0964-01 390 12

Lightweight DMC-M 0964-01 A 251 12

52 Standard DMC-M 1044-01 419 12

Lightweight DMC-M 1044-01 A 271 12

Type TE Part No. EN Part No. Mass, Max. (g) Page

Keying 732-8021-** B EN4165R** 2.5 13

MASSES

PAGE 33

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Modules

Plug Keying Component

Insert Contact Type TE Part No. EN Part No. Mass, Max. (g) Page

Standard Modules

00-00 (Blank) —DMC-M 00-00 PN EN4165-1N 3.0 20

01-08 Male DMC-M 01-08 A* EN4165A01-081*A 2.9 19

Female DMC-M 01-08 B* EN4165A01-081*B 4.4 19

04-12 Male DMC-M 04-12 A* EN4165A04-121*A 2.8 19

Female DMC-M 04-12 B* EN4165A04-121*B 3.7 19

08-16 Male DMC-M 08-16 A* EN4165A08-161*A 2.9 19

Female DMC-M 08-16 B* EN4165A08-161*B 3.9 19

12-20 Male DMC-M 12-20 A* EN4165A12-201*A 3.2 19

Female DMC-M 12-20 B* EN4165A12-201*B 4.1 19

20-22 Male DMC-M 20-22 A* EN4165A20-221*A 3.1 19

Female DMC-M 20-22 B* EN4165A20-221*B 4.1 19

99-01 Male DMC-M 99-01 A* EN4165A99-011*A 2.4 19

Female DMC-M 99-01 B* EN4165A99-011*B 3.2 19

99-06 Male DMC-M 99-06 A* ?? 19

Female DMC-M 99-06 B* ?? 19

99-10 Male DMC-M 99-10 A* EN4165A99-101*A 3.2 19

Female DMC-M 99-10 B* EN4165A99-101*B 4.2 19

High-Density Modules

30-23 Male DMC-MR 30-23 A* —3.4 19

Female DMC-MR 30-23 B* —2.5 19

Aluminum Cable Compatible Modules

20-22 Male DMC-MA 20-22 A* EN4165A20A221*A 2.9 19

Female DMC-MA 20-22 B* EN4165A20A221*B 3.2 19

99-01 Male DMC-MA 99-01 A* EN4165A99A011*A 2.9 19

Female DMC-MA 99-01 B* EN4165A99A011*B 3.7 19

Grounding Modules

01-08 Male DMC-M 01-08 A*-G* EN4165A01G081*A 3.6 20

Female DMC-M 01-08 B*-G* EN4165A01G081*B 7.5 20

04-12 Male DMC-M 04-12 A*-G* EN4165A04G121*A 3.8 20

Female DMC-M 04-12 B*-G* EN4165A04G121*B 6.7 20

08-16 Male DMC-M 08-16 A*-G* EN4165A08G161*A 3.9 20

Female DMC-M 08-16 B*-G* EN4165A08G161*B 6.9 20

BACC47 Contact Compliant

99-10 Male DMC-MB 99-10 A* —2.9 19

Female DMC-MB 99-10 B* —4.1 19

12-20 Male DMC-MB 12-20 A* —2.9 19

Female DMC-MB 12-20 B* —4.1 19

Type TE Part No. EN Part No. Mass, Max. (g) Page

Keying 732-8020-** EN4165P** 0.7 18

MASSES

PAGE 34

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Modules (continued)

Insert Contact Type TE Part No. EN Part No. Mass, Max. (g) Page

Quadrax Modules

01-08 (Ni) Male DMC-M 01-08 A*-GQ EN4165A01Q281*A 3.5 20

Female DMC-M 01-08 B*-GQ EN4165A01Q281*B 7.4 20

01-08 (Cd) Male DMC-M 01-08 A*-GQW —3.5 20

Female DMC-M 01-08 B*-GQW —7.4 20

Shunt Modules

20-22 (5 Shunts 4 Ways) Female DMC-M 22-05 B* EN4165A20Y221*B 3.8 20

20-22 (3 Shunts 4 Ways and

4 Shunts 2 Ways) Female DMC-M 22-07 B* EN4165A2AY221*B 3.7 20

20-22 (10 Shunts 2 Ways) Female DMC-M 22-10 B* EN4165A2BY221*B 3.7 20

High-Speed Modules

99-02 Male DMC-M 99-02 A* —3.6 20

Female DMC-M 99-02 B* —4.4 20

99-03 Male DMC-M 99-03 A* —2.5 20

Female DMC-M 99-03 B* —3.35 20

99-04 Male DMC-M 99-04 A* —2.9 20

Female DMC-M 99-04 B* —3.4 20

16-02

Male 2226454-1 /

DMC-M 16-02 A* —2.5 20

Female 2226455-1 /

DMC-M 16-02 B* —3.4 20

Optical and Hybrid Modules

MC5 Male 458235 —5.5 21

Female 458238 —8.9 21

T47 Hybrid Male 459736-x —4.3 21

Female 459739-x —5.3 21

MC6 Hermaphroditic DMC-M01-MC6N —12.5 21

MASSES

PAGE 35

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Shielded Accessory Bodies

Non-Shielded Cable Clamps

Chimneys for Shielded Accessories

MASSES

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

2-Module Plugs

Free Hanging 732-8052-14 A EN4165F14P2 732-8052-14 WA EN4165W14P2 25 27

Rack and Panel 732-8053-14 A —732-8053-14 23 27

4-Module Plugs

Free Hanging (Aluminum) 732-8052-10 A EN4165F14P4 732-8052-10 WA EN4165W14P4 34 27

Free Hanging (Composite) 732-8052-10 M EN4165M14P4 732-8052-10 J EN4165J14P4 26 27

Rack and Panel 732-8053-10 A —732-8053-10 WA —32 27

2-Module Receptacles

Standard and Short 732-8054-14 A EN4165F14R2 732-8054-14 WA EN4165W14R2 23 27

4-Module Receptacles

Standard and Short 732-8054-10 A EN4165F14R4 732-8054-10 WA EN4165W14R4 32 27

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

Round 732-8052-11 A EN4165F15 732-8052-11 WA EN4165W15 1.5 30

Double Oval 732-8052-12 A EN4165F16 732-8052-12 WA EN4165W16 3.5 30

Blank 732-8052-13 A EN4165F17 732-8052-13 WA EN4165W17 2 30

Anti-Rotation Round 732-8052-18 A —732-8052-18 WA —1.55 31

Anti-Rotation Round/Tie Wrap 732-8052-19 A EN4165F15A 732-8052-19 WA EN4165W15A 1.7 30

Type Nickel Finish Olive Drab Cadmium Finish Mass,

Max. (g) Page

TE Part No. EN Part No. TE Part No. EN Part No.

4-Module Shells 732-8002-00 EN4165F13A4 732-8002-00 W EN4165W13A4 34 29

2-Module Shells 732-8002-01 EN4165F13A2 732-8002-01 W EN4165W13A2 22 29

PAGE 36

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

ELECTRICAL CONTACTS

Color Coding

Pin: AS39029/58

Socket: AS39029/57

Color Coding

Pin and Socket: EN3155

Size Part No. Type Color Bands Wire Range

AS39029 EN3155 AWG mm2

24/24 724-0001-24 Pin — — 26-24 0.15 - 0.25

724-0003-24 Socket

23/22 182-4043-23 Pin —Green-Purple 26-22 0.15 - 0.4

182-4042-23 Socket

22/22 724-0001-22 Pin Orange-Blue-Black Green-Green 26-22 0.15 - 0.40

724-0003-22 Socket Orange-Green-Yellow

22/20 182-0860-22 Pin —Red-Green 24-20 0.25 - 0.60

182-0862-22 Socket

20/20 724-0001-20 Pin Orange-Blue-Orange Red-Red 24-20 0.25 - 0.60

724-0003-20 Socket Orange-Green-Purple

20/18 724-1063-20 Pin —Brown-Red 24-18 0.25 - 1.00

724-1064-20 Socket

16/16 724-0001-16 Pin Orange-Blue-Yellow Blue-Blue 20-16 0.60 - 1.20

724-0003-16 Socket Orange-Green-Gray

16/14 724-1063-16 Pin —White-Blue 20-14 0.60 - 2.00

724-1064-16 Socket

12/12 724-0001-12 Pin Orange-Blue-Green Yellow-Yellow 14-12 2.00 - 3.00

724-0003-12 Socket Orange-Green-White

12/10 724-1063-12 Pin —White-Yellow 12-10 3.00 - 5.00

724-1064-12 Socket

08 (Power) 724-0001-08 Pin — — 08 5.30 - 8.98

724-0003-08 Socket

08 (Power) 182-0001-08 Pin — — 08

182-0003-08 Socket

Microcoax 724-0004-16 Pin Yellow-Red-Yellow —KX 22 0.057 - 0.158

724-0005-16 Socket Yellow-Orange-Red

08 (Coax) 182-0125-08 Pin — — ALPEN A 26 DT

182-0126-08 Socket

08 182-0048-08 Pin — — SMA Interface

182-0044-08 Socket

22 (Shunt) 724-1272-22 Socket — — 26-22 0.15 - 0.40

Databus Contacts (Twisted Pair) As Per AS39029

Cable Type Part No. Type Color Bands Conductor Size, Max. Braid OD, Max.

Single Braid 182-0034-03 Pin Brown-Red 2 x 0.34 mm23.48

182-0035-03 Skt

Double Braid 182-0034-04 Pin Red-Red 2 x 0.34 mm23.91

Olive Drab Cadmium Skt

213 2

Inspection hole Inspection hole

21 12

CONTACTS

Bold part numbers are standard contacts delivered with modules.

PAGE 37

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

TOOLING

Part No. Crimp Tool Positioner Insertion/Extraction

Tool

Part No. Mil Part No. Part No. Mil Part No.

724-0001-24

724-0003-24 057-0463-12 M22520/2-01 057-1030-02

057-1030-01 —605837-22

182-4043-23

182-4042-23 057-0463-12 M22520/2-01 057-0467-32

057-0515-32

M22520/2-09

M22520/2-06 M81969/14-01

724-0001-22

724-0003-22 057-0463-12 M22520/2-01 057-0467-32

057-0515-32

M22520/2-09

M22520/2-06 M81969/14-01

182-0860-22

182-0862-22 057-0463-12 M22520/2-01 057-0467-32

057-0515-32

M22520/2-09

M22520/2-06 M81969/14-01

724-0001-20

724-0003-20 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-10

724-1063-20

724-1064-20 057-0461-11 M22520/1-01 056-0466-21 M22520/1-04 M81969/14-10

724-0001-16

724-0003-16 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-03

724-1063-16

724-1064-16 057-0461-11 M22520/1-01 056-0466-21 M22520/1-04 M81969/14-03

724-0001-12

724-0003-12 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-04

724-1063-12

724-1064-12 057-0461-11 M22520/1-01 056-0466-21 M25520/1-04 —

724-0001-08

724-0003-08 057-0064-05 A N/A 057-0065-05 A N/A 114-008 or

M81969/14-06

182-0001-08

182-0003-08 057-0064-05 A N/A 057-0065-05 A N/A 114-008 or

M81969/14-06

724-0004-16

724-0005-16

057-0463-12

(Center Contact)

057-0509-14

(Outer Contact)

N/A

057-0539-32

(Center Contact)

057-0511-34

(Outer Contact)

N/A M15570-16

182-0125-08

182-0126-08 N/A N/A N/A N/A 114-008 or

M81969/14-06

182-0048-08

182-0044-08 N/A N/A N/A N/A 114-008 or

M81969/14-06

724-1272-22 057-0463-12 M22520/2-01 057-0515-32 M22520/2-06 M81969/14-01

Tooling for Databus Contacts

Cable Type Sleeve Type Center Conductor Ferrule Insertion/Extraction Tool

Single Braid Thermoplastic and

Silicone TDB-CY-08 TDB-CT-HEX Mark C

114-008 or

M81969/14-06

Double Braid Thermoplastic and

Silicone TDB-CT-08 TDB-CT-08HEX Mark D

CONTACTS

Bold part numbers are standard contacts delivered with modules.

PAGE 38

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

MC6 Termini

MC5 Termini

ARINC 801 Termini for T47 Modules

MC6 12 SM 01 P

FAMILY

MC6

NUMBER OF FIBERS

FIBER TYPE

SM Single Mode

MM Multimode

CABLE TYPE

01 Ruggedized Oval Aerospace Multiber Cable, 3.95 mm x 1.60 mm max. Jacket

02 Round Multiber Cable, Ø 3.96 mm max. Jacket

FERRULE TYPE

P Male, with Alignment Pins

S Female, without Alignment Pins

455335 126 01

FAMILY

455335 MC5

OPTICAL HOLE DIAMETER

126 126 μm

127 127 μm

CABLE TYPE

00 900 μm buered ber

01 2.1 mm cable OD

02 1.8 mm cable OD

03 2.5 mm cable OD

04 2.4 mm cable OD

05 1.2 mm cable OD

459265 126 02

FAMILY

459265 ARINC 801

OPTICAL HOLE DIAMETER

126 126 μm

CABLE TYPE

00 900 μm buered ber

02 1.8 mm cable OD

FIBER OPTIC TERMINI

PAGE 39

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

FIBER OPTIC TOOL KITS

We offer tool kits to meet a range of needs, including emergency

field terminations, workshop termination, fusion splicing, and testing

and inspection. Kit can cover a generic range of connectors or

can be tailored to specific products.

FIBER OPTIC TRAINING

Our training equips technicians with best practices for handling

fiber and termination it in a range of TE connectors. Contact TE for

further details.

FIBER OPTIC TOOL KITS AND TRAINING

PAGE 40

DEUTSCH DMC-M Series Multicavity EN4165 ConnectorsDEUTSCH DMC-M Series Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

Ø 3.2 ±0.05

[0.126 ±0.002]

54 ±0.1

[2.126 ±0.02]

46.2 ±0.1

[1.819 ±0.004]

7.8

[0.307]

MAX.

38.4

[1.512]

MAX.

33.4

[1.315]

MAX.

54.9

[2.161]

MAX.

16.7 ±0.1

[0.657 ±0.004]

11. 0 ±0.05

[0.433 ±0.002]

76.7 ±0.1

[3.02 ±0.004]

84.5 ±0.1

[3.327 ±0.004]

2 times

Ø 2 .15 ±0.05

[0.085 ±0.002]

4 times

15.4 ±0.1

[0.606 ±0.004]

80.5 ±0.5

[3.169 ±0.02]

75.3 ±0.1

[2.965 ±0.004]

50 ±0.5

[1.969 ±0.02]

44.8 ±0.1

[1.764 ±0.004]

M3 or 2 times

Unmated

Position

Mated

Position

Coupling torque 0.1 daN.m max.

38.4

[1.512]

MAX.

7.8

[0.307]

MAX.

33.4

[1.315]

MAX.

54.9

[2.161]

MAX.

Panel Cutouts for Rack and Panel Plugs

Panel Cutouts for Receptacles

TYPES 88, 89

TYPES 82, 83, 84, 85

TYPES 48, 49

TYPES 42, 43, 44, 45

Coupling torque for panel screw: 0.2 daN.m (17.7 in. lbf) max.

Maximum Misalignment between Plug and Receptacle

OZ: ±2 mm (±0.79 in.) OY: ±0.75 mm (±0.030 in.) OX: ±0.75 mm (±0.030 in.) ø: ±1°

PANEL CUTOUTS

PAGE 41

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

CONNECTOR TOOLING

Mounting and dismounting of

receptacle keying component.

057-0590-80 / EN4165TC

Mounting of plug keying component

Manual insertion and extraction

Insertion tool (only for sealed module)

Long version

057-0699-00 A / EN4165TS

Short version

057-0699-00 B / EN4165TS

Extraction tool

Long version

057-0289-00 A / EN4165TN

Short version

057-0289-00 B / EN4165TN

Standard allen keys

Contact tools

Size 22: M81969/14-01

Size 20: M81969/14-10

Size 16: M81969/14-03

Size 12: M81969/14-04

Size 08: M81969/14-06

* Delivered with contacts

PAGE 42

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Contact Crimping

Use a crimping tool with the appropriate

pilot stop.

Insert the contact into the crimping tool.

Tighten the crimping tool fully. The handles will

not release until the tool is fully bottomed.

Strip the insulation from the copper wire, with

5 mm maximum strip length. (For aluminum wire,

consult TE.)

Insert the wire into the contact.

Remove and inspect the completed termination.

The contact must have 8 markings, and the wire

must be seen in the contact side hole.

For the use of a shielded version, do not forget to slide the cables in the chimney before crimping the contacts.

USER MANUAL

PAGE 43

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Contact Insertion and Withdrawal

Use the appropriate plastic tool. There is one tool

for each contact size.

Insert the wire into the slot of the colored end of

tool. Pull the wire until the contact butts against

the tool.

For extraction, insert the wire in the slot of

the white end of the tool. Slide the tool into

the cavity and push it in until butts against the

contact shoulder.

Insert the contact in the module cavity. Push the

contact fully home. Then remove the tool and

lightly pull back on the wire to make sure that the

contact is fully seated.

Press the wire between the fingers and the tool.

Then pull the overall wire and tool back.

CONTACT INSERTION

CONTACT WITHDRAWAL

Part Number Contact Size

M81969/14-01 22

M81969/14-10 20

M81969/14-03 16

M81969/14-04 12

114-008 or M81969/14-06 08

USER MANUAL

PAGE 44

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Module Insertion and Extraction

The module must be inserted from the rear side of

the housing. The module polarization key must be

visible from the marked side of the housing.

For extraction use the tool part number

057-0289-00 A or B.

Note the tool’s different orientation depending on

the A, B, C or D cavities.

Manually push the module into the cavity until the

module’s rear should butt against the shell.

For sealed modules, use the insertion tool part

number 057-0699-00 A or B.

Check that the module is properly seated either by

pulling back the wires or by pushing the module

from the front of the housing.

Slide the tool around the cable. Then push the

tool inside the cavity until the tool butts against

the shell.

Press the cable between the tool and the fingers

and pull back. If the module is not wired, use the

same tool, but push the module from the front of

the housing.

MODULE INSERTION

MODULE EXTRACTION

USER MANUAL

PAGE 45

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Mounting the Receptacle Keying Component

Mounting the Plug Keying Component

For mounting and dismounting, use the tool

057-0590-80.

The receptacle keying component must be inserted

from the rear side of the receptacle housing. The

component can be rotated in 60° increments.

Orientation is indicated by the largest keyway.

Use the plug keying component corresponding

to the receptacle keying component (same

color code).

Tighten the nut with the tool, by applying a

0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.) coupling torque.

Insert the nut from the front of the

receptacle housing.

Insert the plug keying component in the front side

of the plug housing. Make sure that it has the same

orientation as the receptacle key. Then seat the

plug keying component manually by pushing it

fully into the cavity.

USER MANUAL

PAGE 46

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

DEUTSCH DMC-M Series Connectors

Free Plug/Receptacle Coupling

Mounting Shielded Braid on Chimney

Use the tool 05 7-0450-00 to tighten the ring

around the shielded braid over the chimney.

Use the tool part number 057-0592-80 or a

standard allen key and apply a 0.1 ±0.03 daN.m

(8.8 ±2.6 in. lbf.) coupling torque.

Slide the chimney and the shielded braid around

the cable.

Insert the module in the housing.

Slide the shielded braid and the 3 mm band strap

ring over the chimney.

USER MANUAL

PAGE 47

DEUTSCH DMC-M Series Multicavity EN4165 Connectors

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

Shielded Accessories Assembly

Fit the accessory cover, and tighten the overall screws by applying a 0.05 +0.02 daN.m (4.4 +1.7 in. lbf.)

coupling torque with a standard allen key.

Choose the appropriate plug or receptacle

accessory. Insert the accessory in the housing.

Make sure that the marking of the accessory is in

front of the respective housing’s cavities.

Insert the chimneys in their cavities.

USER MANUAL

te.com/dmc-m

AMP, AGASTAT, CII, DEUTSCH, HARTMAN, KILOVAC, LL ROWE, MICRODOT, NANONICS, POLAMCO,

Raychem, SEACON, TE, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity

Ltd. family of companies. Other products, logos, and company names mentioned herein may be trademarks of

their respective owners.

While TE Connectivity (TE) has made every reasonable eort to ensure the accuracy of the information herein,

nothing herein constitutes any guarantee that such information is error-free, or any other representation,

warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this

publication reserves the right to make any adjustments to the information contained herein at any time without

notice. All implied warranties regarding the information contained herein, including, but not limited to, any

implied warranties of merchantability or tness for a particular purpose are expressly disclaimed. The dimensions

herein are for reference purposes only and are subject to change without notice. Specications are subject to

change without notice.

Consult TE for the latest dimensions and design specications.

1-1773886-6 02/17

AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS

LET’S CONNECT

We make it easy to connect with our experts and are ready to

provide all the support you need. Just call your local support number or visit

www.te.com/industrial to chat with a Product Information Specialist.

Technical Support

te.com/support-center

North America +1 800 522 6752

North America (Toll) +1 717 986 7777

EMEA/South Africa +800 0440 5100

EMEA (Toll) +31 73 624 6999

India (Toll-Free) +800 440 5100

Asia Pacic +86 400 820 6015

Japan +81 044 844 8180

Australia +61 2 9554 2695

New Zealand +64 (0) 9 634 4580

The Rugged, Modular Solution for Flexible, Reliable

Aerospace Connectivity