SDV Series
• 16 Pin DIP SSR
• Ratings to 1.5A @ 280 VAC
• SCR output
• 3.5-10Vdc control input
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage 1.5A 1.5A
3.5-10 VDC SDV2415 SDV2415R
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 12-280
Transient Overvoltage [Vpk] 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.01
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500
Maximum Load Current [Arms](3) 1.5
Minimum Load Current [Arms] 0.025
Maximum Surge Current (16.6ms) [Apk] 30
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.2
Minimum Power Factor (with Maximum Load) 0.5
INPUT SPECIFICATIONS (1)
Description SDV
Control Voltage Range 3.5-10 VDC
Control Current Range -
Must Turn On Voltage 3.5 VDC
Must Turn On Current -
Must Turn Off Voltage 1.0 VDC
Must Turn Off Current -
Typical Input Current @ 5 VDC 15 mAdc
Nominal Input Impedance 270 Ohm
Maximum Turn-On Time [msec] (4) 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)( 2) 3750 Vrms
Minimum Insulation Resistance (@ 500 VDC)(2) 109 Ohm
Maximum Capacitance, Input/Output 2.0 pF
Ambient Operating Temperature Range -30 to 80°C
Ambient Storage Temperature Range -30 to 125°C
Weight (typical) 0.10 oz. (2.9g)
Encapsulation Thermally Conductive Epoxy
GENERAL NOTES
1) All paramet ers at 25¼°C unl ess oth e r wise speci fie d.
2) Dielectric and insulati on resistance a re measu red
3) Off-State dv/dt test method per EIA/NARM standard RS-443
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in acc ord anc e wit h the re qui rements of IEC 62314
116950 LR81689
Rev. 121211
ANNEX - ENVIROMENTAL INFORMATION
