MC74VHCT14A Hex Schmitt Inverter The MC74VHCT14A is an advanced high speed CMOS Schmitt inverter fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. Pin configuration and function are the same as the MC74VHCT04A, but the inputs have hysteresis and, with its Schmitt trigger function, the VHCT14A can be used as a line receiver which will receive slow input signals. The VHCT inputs are compatible with TTL levels. This device can be used as a level converter for interfacing 3.3 V to 5.0 V, because it has full 5.0 V CMOS level output swings. The VHCT14A input structures provide protection when voltages between 0 V and 5.5 V are applied, regardless of the supply voltage. The output structures also provide protection when VCC = 0 V. These input and output structures help prevent device destruction caused by supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc. The internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. The inputs tolerate voltages up to 7.0 V, allowing the interface of 5.0 V systems to 3.0 V systems. http://onsemi.com MARKING DIAGRAMS 14 SOIC-14 D SUFFIX CASE 751A 1 1 14 VHCT 14A ALYWG G TSSOP-14 DT SUFFIX CASE 948G 1 1 14 Features * * * * * * * * * * VHCT14AG AWLYWW High Speed: tPD = 5.5 ns (Typ) at VCC = 5.0 V Low Power Dissipation: ICC = 2.0 mA (Max) at TA = 25C TTL-Compatible Inputs: VIL = 0.8 V; VIH = 2.0 V Power Down Protection Provided on Inputs Balanced Propagation Delays Designed for 2.0 V to 5.5 V Operating Range Low Noise: VOLP = 0.8 V (Max) Pin and Function Compatible with Other Standard Logic Families Chip Complexity: 60 FETs or 15 Equivalent Gates These Devices are Pb-Free and are RoHS Compliant SOEIAJ-14 M SUFFIX CASE 965 1 74VHCT14 ALYWG 1 A = Assembly Location WL, L = Wafer Lot Y, YY = Year WW, W = Work Week G or G = Pb-Free Package (Note: Microdot may be in either location) FUNCTION TABLE Inputs Outputs A Y L H H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. (c) Semiconductor Components Industries, LLC, 2011 May, 2011 - Rev. 5 1 Publication Order Number: MC74VHCT14A/D MC74VHCT14A A1 A2 A3 1 2 3 4 5 6 9 8 11 10 Y1 Y2 Y3 VCC A6 Y6 A5 Y5 A4 Y4 14 13 12 11 10 9 8 1 2 3 4 5 6 7 A1 Y1 A2 Y2 A3 Y3 GND Y=A A4 A5 A6 13 12 Y4 Y5 Y6 Pinout: 14-Lead Packages (Top View) Figure 1. Logic Diagram MAXIMUM RATINGS Parameter Symbol Value Unit DC Supply Voltage VCC -0.5 to +7.0 V DC Input Voltage VIN -0.5 to +7.0 V VOUT -0.5 to VCC +0.5 V V VOUT -0.5 to 7.0 V DC Output Voltage Output in HIGH or LOW State (Note 1) VCC = 0 V DC Input Diode Current IIK -20 mA DC Output Diode Current IOK $20 mA DC Output Source/Sink Current IO $25 mA DC Supply Current per Supply Pin ICC $50 mA DC Ground Current per Ground Pin IGND $50 mA Storage Temperature Range TSTG -65 to +150 C Lead Temperature, 1 mm from Case for 10 Seconds TL 260 C Junction Temperature under Bias TJ +150 C Thermal Resistance SOIC TSSOP qJA 125 170 C/W Power Dissipation in Still Air SOIC TSSOP PD 500 450 mW VESD >2000 >200 2000 V ILatchup $300 mA ESD Withstand Voltage Latchup Performance Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Above VCC and Below GND at 85C (Note 5) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. IO absolute maximum rating must be observed. 2. Tested to EIA/JESD22-A114-A. 3. Tested to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. 5. Tested to EIA/JESD78. http://onsemi.com 2 MC74VHCT14A RECOMMENDED OPERATING CONDITIONS Parameter Symbol Min Max Unit VCC 4.5 5.5 V Input Voltage VI 0 5.5 V Output Voltage (Note 6) VO 0 VCC V VCC = 0 V VO 0 5.5 V Operating Free-Air Temperature TA -55 +125 C Supply Voltage 6. IO absolute maximum rating must be observed. IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIII IIII IIIIIIII IIIII IIIII IIIIIIIIII IIIIIII III III III III II III III II III II IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIII IIIIIIIIIIIIIIIII IIIIIIIIII IIIIII IIIIII IIIIII IIIII IIIII IIIIII IIIII IIIII IIIII II IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIII IIII IIIIIIII IIIII IIIII IIIIIIIIII IIIIIII IIIII III III II III III II III II IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII DC ELECTRICAL CHARACTERISTICS Parameter Test Conditions VCC V Symbol TA = 25C Min Typ Positive Threshold Voltage VT+ 4.5 5.5 Negative Threshold Voltage VT- 4.5 5.5 0.5 0.6 Hysteresis Voltage VH 4.5 5.5 0.40 0.40 VOH 4.5 4.4 5.5 3.94 Minimum High-Level Output Voltage IOH = -50 mA VIN = VIH or VIL IOH = -50 mA IOH = -8.0 mA Maximum Low-Level Output Voltage VIN = VIH or VIL IOL = 50 mA VOL 4.5 IOL = 8.0 mA Max TA 85C TA 125C Min Min Max 1.9 2.1 1.9 2.1 0.5 0.6 1.40 1.50 4.5 0.40 0.40 Unit 1.9 2.1 V 0.5 0.6 1.40 1.50 4.4 0.40 0.40 V 1.40 1.50 4.4 3.80 0.0 Max V V 3.66 0.1 0.1 0.1 V 5.5 0.36 0.44 0.52 Maximum Input Leakage Current VIN = 5.5 V or GND IIN 0 to 5.5 0.1 1.0 1.0 mA Maximum Quiescent Supply Current VIN = VCC or GND ICC 5.5 2.0 20 40 mA Quiescent Supply Current Input: VIN = 3.4 V ICCT 5.5 1.35 1.50 1.65 mA Output Leakage Current VOUT = 5.5 V IOFF 0.0 0.5 5.0 10 mA AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns) TA = 25C Parameter Maximum Propagation Delay, A to Y Test Conditions VCC = 5.0 0.5 V CL = 15 pF CL = 50 pF Max Min Max Min Max tPLH, tPHL 5.5 7.0 7.6 9.6 1.0 1.0 9.0 11.0 1.0 1.0 11.5 13.5 CIN 2.0 10 Maximum Input Capacitance Power Dissipation Capacitance (Note 7) TA 125C Typ Symbol Min TA 85C 10 10 Unit ns pF Typical @ 25C, VCC = 5.0 V 11 CPD pF 7. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC / 6 (per buffer). CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. NOISE CHARACTERISTICS (Input tr = tf = 3.0 ns, CL = 50 pF, VCC = 5.0 V) TA = 25C Symbol Typ Max Unit Quiet Output Maximum Dynamic VOL VOLP 0.8 1.0 V Quiet Output Minimum Dynamic VOL VOLV -0.8 -1.0 V Minimum High Level Dynamic Input Voltage VIHD 2.0 V Maximum Low Level Dynamic Input Voltage VILD 0.8 V Characteristic http://onsemi.com 3 MC74VHCT14A TEST POINT 3.0V A OUTPUT 1.5V DEVICE UNDER TEST GND tPLH tPHL CL* VOH Y 1.5V VOL *Includes all probe and jig capacitance Figure 2. Switching Waveforms Figure 3. Test Circuit (a) A Schmitt-Trigger Squares Up Inputs With Slow Rise and Fall Times (b) A Schmitt-Trigger Offers Maximum Noise Immunity VCC VH VT+ VT- Vin VCC VH VT+ VT- Vin GND GND VOH VOH Vout Vout VOL VOL Figure 4. Typical Schmitt-Trigger Applications ORDERING INFORMATION Device MC74VHCT14ADR2G Package SOIC-14 (Pb-Free) Shipping 2500 / Tape & Reel MC74VHCT14ADTR2G TSSOP-14* MC74VHCT14AMG SOEIAJ-14 (Pb-Free) 50 Units / Rail MC74VHCT14AMELG SOEIAJ-14 (Pb-Free) 2000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *These packages are inherently Pb-Free. http://onsemi.com 4 MC74VHCT14A PACKAGE DIMENSIONS SOIC-14 D SUFFIX CASE 751A-03 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 14 8 -B- P 7 PL 0.25 (0.010) B M 7 1 G -T- D 14 PL 0.25 (0.010) T B S A DIM A B C D F G J K M P R J M K M F R X 45 _ C SEATING PLANE M S SOLDERING FOOTPRINT 7X 7.04 14X 1.52 1 14X 0.58 1.27 PITCH DIMENSIONS: MILLIMETERS http://onsemi.com 5 MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.228 0.244 0.010 0.019 MC74VHCT14A TSSOP-14 CASE 948G-01 ISSUE B 14X K REF 0.10 (0.004) 0.15 (0.006) T U M T U V S S S N 2X 14 L/2 M B -U- L PIN 1 IDENT. N F 7 1 0.15 (0.006) T U 0.25 (0.010) 8 S DETAIL E K A -V- K1 J J1 EEE CCC CCC EEE SECTION N-N C 0.10 (0.004) -T- SEATING PLANE D H G DETAIL E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. MILLIMETERS INCHES DIM MIN MAX MIN MAX A 4.90 5.10 0.193 0.200 B 4.30 4.50 0.169 0.177 C --- 1.20 --- 0.047 D 0.05 0.15 0.002 0.006 F 0.50 0.75 0.020 0.030 G 0.65 BSC 0.026 BSC H 0.50 0.60 0.020 0.024 J 0.09 0.20 0.004 0.008 J1 0.09 0.16 0.004 0.006 -W- K 0.19 0.30 0.007 0.012 K1 0.19 0.25 0.007 0.010 L 6.40 BSC 0.252 BSC M 0_ 8_ 0_ 8_ SOLDERING FOOTPRINT 7.06 1 0.65 PITCH 14X 0.36 14X 1.26 DIMENSIONS: MILLIMETERS http://onsemi.com 6 MC74VHCT14A PACKAGE DIMENSIONS SOEIAJ-14 CASE 965-01 ISSUE B 14 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). LE 8 Q1 E HE L 7 1 M_ DETAIL P Z D VIEW P A e A1 b 0.13 (0.005) c M 0.10 (0.004) DIM A A1 b c D E e HE L LE M Q1 Z MILLIMETERS MIN MAX --2.05 0.05 0.20 0.35 0.50 0.10 0.20 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 _ 0_ 0.70 0.90 --1.42 INCHES MIN MAX --0.081 0.002 0.008 0.014 0.020 0.004 0.008 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 _ 0_ 0.028 0.035 --0.056 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC74VHCT14A/D