NOTES: REVISIONS THIRD ANGLE PROJ. REV 1. INITIAL TOOL SETTING RQUIREMENTS: WITH DIES FIRMLY AFFIXED IN TOOL ON THE DIE MOUNTING SURFACES, CLOSE THE TOOL FULLY (UNTIL THE RATCHET RELEASES) WITH 25-35 LBS,HAND FORCE THE DIES MUST BE 'BUTTED' (TOUCHING BOTH FRONT & REAR SURFACES). THE RATCHET ADJUSTER WHEEL SHOULD BE POSITIONED IN THE CENTER INDENT (+/- ONE INDENT POSITION) A B DESCRIPTION DATE RELEASE TO MFG. 47-20027, 47-20247 DIE-SETS SIZE UPDATED & LENGTH COLUMN ADDED IN TABLE 18-Dec-14 12/8/15 ECO APPR 2809 CL/BCG 50544 CL 2. DO NOT SCALE THIS DRAWING. LENGTH "L" # 0.20 3. REMOVE ALL BURRS, BREAK SHARP EDGES AND CORNERS 0.005 MAXIMUM, UNLESS OTHERWISE SPECIFIED. 4. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE AFTER PLATING. 5. PACKAGING: A. QUANTITY: B. PACKAGE MARKING: DIE SET PART NUMBER SINGLE PACK AMPHENOL RF 47-2XXXX (SEE TABLE) DATE CODE DIE SET OPENINGS IN INCHES (MM) (UNLESS OTHERWISE NOTED, ALL OPENINGS ARE HEXAGONAL) LENGTH "L" 47-20000 0.068(1.73) 0.213(5.41) 0.255(6.48) - - 34.00(1.340) 47-20008 0.151(3.83) 0.178(4.52) 0.213(5.41) - - 34.00(1.340) 47-20004 47-20003 47-20029 47-20001 47-20002 47-20245 47-20026 47-20025 47-20024 47-20027 47-20028 47-20030 47-20247 47-20249 47-20250 47-20251 47-20252 0.068(1.73) 0.080(2.03) 0.255(6.48) 0.052(1.32) 0.178(4.52) 0.190(4.82) 0.213(5.40) 0.068(1.73) 0.320(8.13) 0.068(1.73) 0.324(8.23) 0.429(10.90) 0.042(1.07) 0.068(1.73) 0.178(4.52) 0.105(2.67) 0.068(1.73) 0.042(1.07) 0.052(1.32) 0.052(1.32) 0.324(8.23) 47-20257 0.324(8.23) 0.118(3.00) - 47-20256 0.255(6.48) 0.068(1.73) 0.042 (1.07) SQ. 47-20255 0.068(1.73) 0.042(1.07) 0.042(1.07) 0.178(4.52) 0.052(1.32) 0.429(10.90) 0.105(2.67) - 0.429(10.90) 0.429(10.90) 0.042(1.07) 0.178(4.52) 0.100(2.54) 0.100(2.54) 47-20253 47-20254 0.128(3.25) 0.213(5.41) 0.178(4.52) 0.350(8.88) - - 0.213(5.40) - - 34.00(1.340) - 34.00(1.340) - - - 34.04(1.341) - 34.00(1.340) - - 0.255(6.48) 0.100(2.54) 0.429(10.90) 0.263(6.68) - - 0.278(7.08) - - 0.128(3.25) 0.178(4.52) - - - - - 0.068(1.73) 0.178(4.52) 0.278(7.06) 0.255(6.48) 0.319(8.10) 0.255(6.48) 0.042(1.07) - 0.075(1.90) - 0.128(3.25) 39.24(1.546) - 0.068(1.73) 0.151(3.83) 0.075(1.90) 34.00(1.340) 0.255(6.48) 0.128(3.25) 0.068(1.73) 34.00(1.340) 0.213(5.41) 0.068(1.73) 0.187(4.75) 34.00(1.340) 0.100(2.54) 0.052(1.32) 0.278(7.06) - - 0.255(6.48) 0.068(1.73) - 0.042(1.07) 0.255(6.48) 0.151(3.84) - - 0.324(8.23) - UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: <0.5mm 0.5 - 6mm 6 - 30mm 30 - 120mm ANGLES NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. 42.00(1.655) 34.04(1.341) 34.00(1.340) 34.00(1.340) 34.00(1.340) LENGTH "L" # 0.20 40.00(1.575) - CUSTOMER OUTLINE DRAWING - ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY - MATERIAL REFERENCE EAR # 6228 CONFIGURATION LEVEL: In Work FINISH DRAWN CLEMENT DATE 12-Dec-14 ENGINEER B.C. GLEISSNER DATE 12-Dec-14 APPROVED B.C. GLEISSNER DATE 12/18/14 CAD FILE TITLE Amphenol RF DIE SETS SCALE: NTS DWG SIZE B SHEET www.amphenolrf.com DRAWING NO. 47-2XXXX 2 OF 2 REV B ITEM NO. PART NO. 47-2XXXX 47-2XXXX