3M TM Connectors, Compact Flash Type II SMT, Headers, Sockets, Shunts, Cable and Accessories Round 3M Halogen Free Cables Compact FlashTM Type II SMT Headers and Accessories 3MTM Halogen Free Cables combine the convenience of mass termination with the advantages of halogen-free material. In applications where sensitive electronic equipment is located in enclosed spaces, smoke from an electrical fire can cause problems if the cable insulation is made with compounds that contain halogen. The flame-retardant insulation in this cable series is halogen free; that is the materials contain no more halogen than what would be found as an acknowledged trace contaminate or background level. In the event of a fire, the halogen-free insulation helps to prevent the spread of fire thereby helping to protect people and equipment. Normal and Low Profile SMT CF II Headers with normal and inverse design guide rail configurations. The 25 micro inch gold flash over Palladium Nickel is a qualified plating for the Telecordia specification. 0.050" Round Conductor Flat Cable, 28 AWG Stranded, 100' Spools Mfr.'s Type 618-3112 618-3113 618-3114 618-3115 618-3116 618-3118 618-3119 618-3121 618-3122 618-3123 618-3124 618-3125 618-3126 618-3127 No. of Conductors 2010/10 2010/14 2010/15 2010/16 2010/20 2010/25 2010/26 2010/34 2010/36 2010/37 2010/40 2010/50 2010/60 2010/64 Normal Version Stock No. Mfr.'s Type 1-24 25-49 50-Up 0.500" 0.700" 0.750" 0.800" 1.000" 1.250" 1.300" 1.700" 1.800" 1.850" 2.000" 2.500" 3.000" 3.200" 6.77 6.01 5.73 5.09 5.17 4.59 618-2212 N7E50-A516HE-50 Inverse Compact Flash Header with 2.0 mm Board Standoff 6.01 618-2213 N7E50-A516HE-40 Inverse Compact Flash Header without a Board Standoff 6.77 5.09 5.73 4.59 5.17 1.43 1.43 3.33 3.33 1.28 1.28 3.00 3.00 Inverse Version PER ROLL Description 10 14 15 16 20 25 26 34 36 37 40 50 60 64 2100/10TP 2100/14TP 2100/16TP 2100/20TP 2100/26TP 2100/34TP 2100/40TP 2100/50TP 2100/60TP 2100/64TP EACH Description 1-4 5-9 39.35 51.79 55.47 59.17 73.99 92.48 96.17 125.75 133.16 136.86 147.95 184.95 221.94 236.72 33.95 44.94 48.13 51.35 64.20 80.25 83.47 109.13 115.55 118.77 128.38 160.49 192.58 205.42 Right Button Snap on Ejector 618-2214 618-2215 618-2216 618-2217 7E50-9316-04 7E50-A316-04 7E50-9716-05 7E50-A716-05 Normal Version Normal Version Inverse Version Inverse Version 10 (5 Pair) 14 (7 Pair) 16 (8 Pair) 20 (10 Pair) 26 (13 Pair) 34 (17 Pair) 40 (20 Pair) 50 (25 Pair) 60 (30 Pair) 64 (32 Pair) 0.500" 0.700" 0.800" 1.000" 1.300" 1.700" 2.000" 2.500" 3.000" 3.200" 91.89 128.65 147.03 183.79 238.92 315.73 367.57 459.46 551.35 584.80 0.100" Pitch Notched Cable or Discrete Wire One row, side-to-side stackable. Mates to 3M one row pin strip headers. Twin slot IDC provides four points of contact. Insulation Material: Glass-filled polyester (PBT). Contact Material: Copper alloy. Current Rating: 22-24 AWG, 2 A; 26-28 AWG, 1.5 A. Temperature Rating: -55C to +105C. KCP for 26 and 28 AWG solid and stranded wire. KEP for 22 AVG stranded and 24 AWG solid and stranded wire. 79.74 111.64 127.59 159.49 207.32 271.12 318.96 398.71 478.44 510.34 0.100" x 0.100" Condo Headers Right Angle, 3 Wall/3 Wall and 4 Wall/4 Wall Stacked Pins Conserve Space on the Circuit Board Allowing Higher Density Packaging Pin Quantity to 128 Gives Design Flexibility with Latching "HDI" Alternative 3 Wall/3 Wall Three Wall Fits In VME Board Stacking Criteria Accepts Standard IDC Sockets Mates with Standard Flat Cable Harnesses 1.68 1.68 3.93 3.93 0.100" Wiremount Socket 0.050" Twisted Pair Flat Cable, 28 AWG Stranded, 30 Meter Spools 618-3102 618-3103 618-3104 618-3105 618-3106 618-3107 618-3108 618-3109 618-3110 618-3111 Inverse 618-2210 N7E50-7516HE-50 Compact Flash II SMT Header with 2.0 mm Board Standoff 618-2211 N7E50-7516HE-40 Compact Flash II SMT Header without a Board Standoff Twisted Pair Stock No. Normal Stock No. Mfr.'s Type No. of Contacts Contact Plating Wire Size 618-1840 618-1842 618-1844 618-1845 618-1847 618-1849 618-1851 618-1853 618-1854 618-1856 618-1858 618-1860 618-1861 618-1864 618-1863 618-1867 618-1868 618-1870 618-1872 CHG-1002-001010-KCP CHG-1002-001010-KEP CHG-1003-001010-KCP CHG-1003-001010-KEP CHG-1004-001010-KCP CHG-1004-001010-KEP CHG-1005-001010-KCP CHG-1005-001010-KEP CHG-1006-001010-KCP CHG-1006-001010-KEP CHG-1007-001010-KCP CHG-1007-001010-KEP CHG-1008-001010-KCP CHG-1008-001010-KEP CHG-1009-001010-KCP CHG-1009-001010-KEP CHG-1010-001010-KCP CHG-1010-001010-KEP CHG-1014-001010-KCP 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 14 Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area Gold wipe area 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG EACH 1-24 25-49 50-99 100-Up 1.17 1.01 1.75 1.53 2.33 2.05 3.58 2.50 3.43 2.99 3.99 3.99 4.57 4.57 4.07 4.50 3.81 3.81 5.34 .86 .75 1.28 1.12 1.71 1.50 2.62 1.87 2.57 2.25 3.00 3.00 3.42 3.42 3.06 3.37 2.86 2.86 3.99 .79 .69 1.19 1.04 1.59 1.39 2.41 1.73 2.37 2.08 2.77 2.77 3.16 3.16 2.81 3.12 2.64 2.64 3.70 4 Wall/4 Wall Both short and long latch/ejectors are roll pin. Insulation Material: Glass-filled polyester (PBT). Flammability: UL 94V-0. Contact Material: Copper alloy. Current Rating: 1 A. Temperature Rating: -55C to +105C. Color: Gray. 0.100" x 0.100" Polarized Wiremount Socket 3 Wall/3 Wall 0.100" Pitch Notched Ribbon Cable or Discrete Wire EACH Stock No. Mfr.'s Type No. of Contacts Latch Ejector Solder Tails 1-24 25-49 50-99 100-Up 618-1824 618-1826 618-1827 618-1809 618-1811 3428-D202 3428-D302 3428-D303UB 3372-D202 3372-D302UB 40 40 40 120 120 Short Long Long Short Long 0.062 Thick Board 0.062 Thick Board 0.094 to 0.125 Thick Board 0.062 Thick Board 0.062 Thick Board 11.43 11.43 10.51 25.63 25.63 9.64 9.64 8.85 21.81 21.81 8.75 8.75 8.03 19.99 19.99 8.08 8.08 7.41 18.46 18.46 4 Wall/4Wall 618-1804 618-1829 618-1816 618-1817 3314-L203UB 3428-L302 3372-L302 3372-L303 28 32 120 120 Short Long Long Long 0.094 to 0.125 Thick Board 0.062 Thick Board 0.062 Thick Board 0.094 to 0.125 Thick Board .95 .83 1.42 1.24 1.89 1.66 2.89 2.07 2.84 2.48 3.31 3.31 3.78 3.78 3.36 3.73 3.15 3.15 4.41 8.99 11.43 25.63 25.63 7.57 9.64 21.81 21.81 6.87 8.75 19.99 19.99 6.34 8.08 18.46 18.46 2 mm Ultra Low Profile Shunt Ultra Low Profile Dual Wipe Contacts Strips of 10 Insulation Material: Glass-filled polyester. Flammability: UL94V-0. Color: Gray. Contact Material: Copper alloy. Current Rating: 1 A. Insulation Resistance: >5 x 10 @ 250 VDC. Temperature Rating: -55C to +85C. 618-1596. 957631-30. 1-24 ...........................................................................................................................PER STRIP 25-49 ............................................................................................................................................................... PER STRIP 50-99 ............................................................................................................................................................... PER STRIP 100-Up ............................................................................................................................................................ PER STRIP Two row, military/DIN41612 compatible polarized body. Mates to 3M long latch/eject headers and plugs. Twin slot IDC provides four points of contact. Accepts discrete wire or notched ribbon cable. Insulation Material: Glass filled polyester (PBT). Flammability: UL 94V-0. Contact Material: Copper alloy. Current Ratings: 22-24 AWG -- 2.0 A; 26-28 AWG -- 1.5 A. Temperature Rating: -55C to +105C. EACH Stock No. Mfr.'s Type No. of Contacts Contact Plating Wire Size 1-24 25-49 50-99 100-Up 618-1874 618-1878 618-1879 618-1884 618-1885 618-1890 618-1891 618-1897 618-1571 618-1572 618-1577 618-1579 618-1581 618-1583 CHG-2016-J01010-KEP CHG-2020-J01010-KCP CHG-2020-J01010-KEP CHG-2026-J01010-KCP CHG-2026-J01010-KEP CHG-2030-J01010-KCP CHG-2030-J01010-KEP CHG-2034-J01010-KEP CHG-2040-J01010-KCP CHG-2040-J01010-KEP CHG-2050-J01010-KCP CHG-2050-J01010-KEP CHG-2060-J01010-KCP CHG-2060-J01010-KEP 16 20 20 26 26 30 30 34 40 40 50 50 60 60 Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area Gold Wipe Area 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 26 and 28 AWG 22 and 24 AWG 4.95 5.71 5.71 7.28 7.28 7.27 7.00 7.93 8.40 8.40 9.34 9.34 11.20 11.20 4.10 4.72 4.72 6.14 6.14 6.13 5.90 6.69 7.09 7.09 7.87 7.87 9.44 9.44 3.72 4.28 4.28 5.57 5.57 5.57 5.36 6.07 6.43 6.43 7.14 7.14 8.57 8.57 3.42 3.96 3.96 5.15 5.15 5.15 4.95 5.61 5.93 5.93 6.59 6.59 7.91 7.91 Pistol Grip 3586-12 2.29 1.96 1.79 1.65 Use with prototype and low volume discrete wire CHG terminations. Accommodates both 3M assembly heads 3624-41 and 3624-42 for all three CHG body styles. Same Day Shipments For All Orders Placed Before 9 pm CT ALLIED 203 618-1590. 3586-12..........................................................................................................EACH 187.00 6