618-2210 N7E50-7516HE-50 Compact Flash II SMT Header with 2.0 mm Board Standoff 6.77 5.73 5.17
618-2211 N7E50-7516HE-40 Compact Flash II SMT Header without a Board Standoff 6.01 5.09 4.59
Inverse Version
618-2212 N7E50-A516HE-50 Inverse Compact Flash Header with 2.0 mm Board Standoff 6.01 5.09 4.59
618-2213 N7E50-A516HE-40 Inverse Compact Flash Header without a Board Standoff 6.77 5.73 5.17
Right Button Snap on Ejector
618-2214 7E50-9316-04 Normal Version 1.68 1.43 1.28
618-2215 7E50-A316-04 Normal Version 1.68 1.43 1.28
618-2216 7E50-9716-05 Inverse Version 3.93 3.33 3.00
618-2217 7E50-A716-05 Inverse Version 3.93 3.33 3.00
618-3112 2010/10 10 0.500" 39.35 33.95
618-3113 2010/14 14 0.700" 51.79 44.94
618-3114 2010/15 15 0.750" 55.47 48.13
618-3115 2010/16 16 0.800" 59.17 51.35
618-3116 2010/20 20 1.000" 73.99 64.20
618-3118 2010/25 25 1.250" 92.48 80.25
618-3119 2010/26 26 1.300" 96.17 83.47
618-3121 2010/34 34 1.700" 125.75 109.13
618-3122 2010/36 36 1.800" 133.16 115.55
618-3123 2010/37 37 1.850" 136.86 118.77
618-3124 2010/40 40 2.000" 147.95 128.38
618-3125 2010/50 50 2.500" 184.95 160.49
618-3126 2010/60 60 3.000" 221.94 192.58
618-3127 2010/64 64 3.200" 236.72 205.42
0.050" Twisted Pair Flat Cable, 28 AWG Stranded, 30 Meter Spools
618-3102 2100/10TP 10 (5 Pair) 0.500" 91.89 79.74
618-3103 2100/14TP 14 (7 Pair) 0.700" 128.65 111.64
618-3104 2100/16TP 16 (8 Pair) 0.800" 147.03 127.59
618-3105 2100/20TP 20 (10 Pair) 1.000" 183.79 159.49
618-3106 2100/26TP 26 (13 Pair) 1.300" 238.92 207.32
618-3107 2100/34TP 34 (17 Pair) 1.700" 315.73 271.12
618-3108 2100/40TP 40 (20 Pair) 2.000" 367.57 318.96
618-3109 2100/50TP 50 (25 Pair) 2.500" 459.46 398.71
618-3110 2100/60TP 60 (30 Pair) 3.000" 551.35 478.44
618-3111 2100/64TP 64 (32 Pair) 3.200" 584.80 510.34
618-1840 CHG-1002-001010-KCP 2 Gold wipe area 26 and 28 AWG 1.17 .95 .86 .79
618-1842 CHG-1002-001010-KEP 2 Gold wipe area 22 and 24 AWG 1.01 .83 .75 .69
618-1844 CHG-1003-001010-KCP 3 Gold wipe area 26 and 28 AWG 1.75 1.42 1.28 1.19
618-1845 CHG-1003-001010-KEP 3 Gold wipe area 22 and 24 AWG 1.53 1.24 1.12 1.04
618-1847 CHG-1004-001010-KCP 4 Gold wipe area 26 and 28 AWG 2.33 1.89 1.71 1.59
618-1849 CHG-1004-001010-KEP 4 Gold wipe area 22 and 24 AWG 2.05 1.66 1.50 1.39
618-1851 CHG-1005-001010-KCP 5 Gold wipe area 26 and 28 AWG 3.58 2.89 2.62 2.41
618-1853 CHG-1005-001010-KEP 5 Gold wipe area 22 and 24 AWG 2.50 2.07 1.87 1.73
618-1854 CHG-1006-001010-KCP 6 Gold wipe area 26 and 28 AWG 3.43 2.84 2.57 2.37
618-1856 CHG-1006-001010-KEP 6 Gold wipe area 22 and 24 AWG 2.99 2.48 2.25 2.08
618-1858 CHG-1007-001010-KCP 7 Gold wipe area 26 and 28 AWG 3.99 3.31 3.00 2.77
618-1860 CHG-1007-001010-KEP 7 Gold wipe area 22 and 24 AWG 3.99 3.31 3.00 2.77
618-1861 CHG-1008-001010-KCP 8 Gold wipe area 26 and 28 AWG 4.57 3.78 3.42 3.16
618-1864 CHG-1008-001010-KEP 8 Gold wipe area 22 and 24 AWG 4.57 3.78 3.42 3.16
618-1863 CHG-1009-001010-KCP 9 Gold wipe area 26 and 28 AWG 4.07 3.36 3.06 2.81
618-1867 CHG-1009-001010-KEP 9 Gold wipe area 22 and 24 AWG 4.50 3.73 3.37 3.12
618-1868 CHG-1010-001010-KCP 10 Gold wipe area 26 and 28 AWG 3.81 3.15 2.86 2.64
618-1870 CHG-1010-001010-KEP 10 Gold wipe area 22 and 24 AWG 3.81 3.15 2.86 2.64
618-1872 CHG-1014-001010-KCP 14 Gold wipe area 26 and 28 AWG 5.34 4.41 3.99 3.70
Connectors, Compact FlashTM Type II SMT, Headers, Sockets, Shunts, Cable and Accessories
Same Day Shipments For All Orders Placed Before 9 pm CT ALLIED
203
0.100" Wiremount Socket
0.100" Pitch Notched Cable or Discrete Wire
One row, side-to-side stackable. Mates to 3M one row pin strip headers. Twin
slot IDC provides four points of contact. Insulation Material: Glass-filled
polyester (PBT). Contact Material: Copper alloy. Current Rating: 22-24 AWG,
2 A; 26-28 AWG, 1.5 A. Temperature Rating: –55°C to +105°C. KCP for 26 and
28 AWG solid and stranded wire. KEP for 22 AVG stranded and 24 AWG solid
and stranded wire.
Stock Mfr.’s No. of Contact Wire
No. Type Contacts Plating Size
EACH
100-Up50-9925-491-24
2 mm Ultra Low Profile Shunt
Ultra Low Profile
Dual Wipe Contacts
Strips of 10
Insulation Material: Glass-filled polyester.
Flammability: UL94V-0. Color: Gray. Contact
Material: Copper alloy. Current Rating: 1 A.
Insulation Resistance: >5 ×10 Ω@ 250 VDC.
Temperature Rating: –55°C to +85°C.
618-1596. 957631-30. 1-24 ...........................................................................................................................PER STRIP 2.29
25-49 ............................................................................................................................................................... PER STRIP 1.96
50-99 ............................................................................................................................................................... PER STRIP 1.79
100-Up ............................................................................................................................................................ PER STRIP 1.65
3M Halogen Free Cables
3M™Halogen Free Cables combine the convenience of mass termination with
the advantages of halogen-free material. In applications where sensitive
electronic equipment is located in enclosed spaces, smoke from an electrical
fire can cause problems if the cable insulation is made with compounds that
contain halogen. The flame-retardant insulation in this cable series is halogen
free; that is the materials contain no more halogen than what would be found
as an acknowledged trace contaminate or background level. In the event of a
fire, the halogen-free insulation helps to prevent the spread of fire thereby
helping to protect people and equipment.
0.050" Round Conductor Flat Cable, 28 AWG Stranded, 100' Spools
Stock Mfr.’s No. of Description
No. Type Conductors
PER ROLL
5-91-4
PER ROLL
1-4
Stock Mfr.’s Description
No. Type
25-49 50-Up
EACH
1-24
Round Twisted Pair
0.100" ×0.100"
Condo Headers
Right Angle, 3 Wall/3 Wall and 4 Wall/4 Wall
Stacked Pins Conserve Space on the Circuit Board
Allowing Higher Density Packaging
Pin Quantity to 128 Gives Design Flexibility with
Latching
“HDI” Alternative
Three Wall Fits In VME Board Stacking Criteria
Accepts Standard IDC Sockets
Mates with Standard Flat Cable Harnesses
Both short and long latch/ejectors are roll pin. Insulation Material: Glass-filled polyester (PBT). Flammability: UL 94V-0.
Contact Material: Copper alloy. Current Rating: 1 A. Temperature Rating: –55°C to +105°C. Color: Gray.
3 Wall/3 Wall
3 Wall/3 Wall
4 Wall/4 Wall
Stock Mfr.’s No. of Latch Solder
No. Type Contacts Ejector Tails
EACH
100-Up50-9925-491-24
618-1824 3428-D202 40 Short 0.062 Thick Board 11.43 9.64 8.75 8.08
618-1826 3428-D302 40 Long 0.062 Thick Board 11.43 9.64 8.75 8.08
618-1827 3428-D303UB 40 Long 0.094 to 0.125 Thick Board 10.51 8.85 8.03 7.41
618-1809 3372-D202 120 Short 0.062 Thick Board 25.63 21.81 19.99 18.46
618-1811 3372-D302UB 120 Long 0.062 Thick Board 25.63 21.81 19.99 18.46
4 Wall/4Wall
618-1804 3314-L203UB 28 Short 0.094 to 0.125 Thick Board 8.99 7.57 6.87 6.34
618-1829 3428-L302 32 Long 0.062 Thick Board 11.43 9.64 8.75 8.08
618-1816 3372-L302 120 Long 0.062 Thick Board 25.63 21.81 19.99 18.46
618-1817 3372-L303 120 Long 0.094 to 0.125 Thick Board 25.63 21.81 19.99 18.46
0.100" ×0.100" Polarized Wiremount Socket
0.100" Pitch
Notched Ribbon Cable or Discrete Wire
Two row, military/DIN41612 compatible polarized body. Mates to
3M long latch/eject headers and plugs. Twin slot IDC provides four
points of contact. Accepts discrete wire or notched ribbon cable.
Insulation Material: Glass filled polyester (PBT). Flammability:
UL 94V-0. Contact Material: Copper alloy. Current Ratings:
22-24 AWG — 2.0 A; 26-28 AWG — 1.5 A. Temperature Rating:
–55°C to +105°C.
Stock Mfr.’s No. of Contact Wire
No. Type Contacts Plating Size
EACH
100-Up50-9925-491-24
618-1874 CHG-2016-J01010-KEP 16 Gold Wipe Area 22 and 24 AWG 4.95 4.10 3.72 3.42
618-1878 CHG-2020-J01010-KCP 20 Gold Wipe Area 26 and 28 AWG 5.71 4.72 4.28 3.96
618-1879 CHG-2020-J01010-KEP 20 Gold Wipe Area 22 and 24 AWG 5.71 4.72 4.28 3.96
618-1884 CHG-2026-J01010-KCP 26 Gold Wipe Area 26 and 28 AWG 7.28 6.14 5.57 5.15
618-1885 CHG-2026-J01010-KEP 26 Gold Wipe Area 22 and 24 AWG 7.28 6.14 5.57 5.15
618-1890 CHG-2030-J01010-KCP 30 Gold Wipe Area 26 and 28 AWG 7.27 6.13 5.57 5.15
618-1891 CHG-2030-J01010-KEP 30 Gold Wipe Area 22 and 24 AWG 7.00 5.90 5.36 4.95
618-1897 CHG-2034-J01010-KEP 34 Gold Wipe Area 22 and 24 AWG 7.93 6.69 6.07 5.61
618-1571 CHG-2040-J01010-KCP 40 Gold Wipe Area 26 and 28 AWG 8.40 7.09 6.43 5.93
618-1572 CHG-2040-J01010-KEP 40 Gold Wipe Area 22 and 24 AWG 8.40 7.09 6.43 5.93
618-1577 CHG-2050-J01010-KCP 50 Gold Wipe Area 26 and 28 AWG 9.34 7.87 7.14 6.59
618-1579 CHG-2050-J01010-KEP 50 Gold Wipe Area 22 and 24 AWG 9.34 7.87 7.14 6.59
618-1581 CHG-2060-J01010-KCP 60 Gold Wipe Area 26 and 28 AWG 11.20 9.44 8.57 7.91
618-1583 CHG-2060-J01010-KEP 60 Gold Wipe Area 22 and 24 AWG 11.20 9.44 8.57 7.91
Pistol Grip 3586-12
Use with prototype and low volume discrete wire CHG terminations. Accommodates both 3M
assembly heads 3624-41 and 3624-42 for all three CHG body styles.
618-1590. 3586-12..........................................................................................................EACH 187.00
Compact FlashTM
Type II SMT Headers and
Accessories
Normal and Low Profile SMT CF II Headers with
normal and inverse design guide rail configurations.
The 25 micro inch gold flash over Palladium Nickel
is a qualified plating for the Telecordia specification.
Normal Version
Normal
Inverse
6
3M
