MEMSIC MXR9150MZ-B Prototyping Board User's Guide Page 1of 1 Rev A
MXR9150MZ-B Prototyping Board
MXR9150MZ-B
GENERAL DESCRIPTION
The MXR9150MZ-B provides a convenient and easy way
to evaluate and prototype with the MXR9150MZ tri axes
accelerometer. The accelerometer and passive components
are SMT mounted on the board. Each pin of the
MXR9150MZ SMT device is brought out to standard 0.10
inch on center connections on the sides of the prototyping
board. Wires can either be soldered directly to the
prototyping board or the DIP pins can be used with widely
available breadboard kits.
For complete performance specifications of the
MXR9150MZ refer to the MXR9150MZ datasheet.
PIN DESCRIPTION
Pin Name Description
P1-1 VDD Supply Voltage 2.7 to 3.6 V
P1-2 DI2 Power Down Pin
P1-3 DI1 Power Down Pin
P1-4 GND Ground
P2-1 XOUT X Channel Output
P2-2 YOUT Y Channel Output
P2-3 ZOUT Z Channel Output
P2-4 GND Ground
SCHEMATIC OF THE MXR9150MZ-B
MXR9150MZ-B
MXR9150MZ-B
PCB CONNECTION DIMENSIONS
MXR9150MZ-B
Information furnished by MEMSIC is believed to be accurate and reliable.
However, no responsibility is assumed by MEMSIC for its use, nor for any
infringements of patents or other rights of third parties, which may result from
its use. No license is granted by implication or otherwise under any patent or
patent rights of MEMSIC.
MEMSIC, Inc.
One Technology Drive, Suite 325, Andover, MA, 01810, USA
Tel: +1 978 738 0900 Fax: +1 978 738 0196
www.memsic.com
