5.0V Surface Mount Crystal Clock Oscillator HSM6 XO 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Features: The Connor-Winfield models HSM61, HSM62, and HSM63 are 7.5mm x 5mm, 5.0V HCMOS, Surface Mount, Fixed Frequency Crystal Oscillators (XO) designed for use in all applications requiring precision clocks. The RoHS compliant surface mount package is designed for high-density mounting and is optimum for mass production RoHS Compliant 1.0 to 80 MHz 5.0V Operation Tri-State Enable/Disable Function Overall Frequency Tolerance: HSM61 25 ppm, HSM62 50 ppm, HSM63 100 ppm Temperature Range: -40 to 85C Ceramic Surface Mount Package Tape and Reel Packaging Absolute Maximum Ratings Parameter Minimum Storage Temperature Supply Voltage (Vcc) -55 -0.5 Nominal - Maximum 125 7.0 Units Notes Units Notes C Vdc Operating Specifications Parameter Minimum Nominal Maximum Frequency Range (Fo) 1.0 80 Frequency Tolerance - HSM61 -25 25 HSM62 -50 50 HSM63 -100 100 Operating Temp Range -40 85 Supply Voltage (Vdd) 4.5 5.0 5.5 Supply Current (Icc) - 1.8 to 31.999 MHz 27 32.0 to 49.999 MHz 45 50 to 80.0 MHz 75 MHz ppm 1 C Vdc mA Input Characteristics Parameter Minimum Enable Voltage - (Vih) Disable Voltage - (Vil) Enable Time Disable Time 2.2 - Nominal - Maximum 0.8 100 100 Units Notes Units Notes Vdc Vdc nS nS 2 HCMOS Output Characteristics Parameter Bulletin Page Revision Date Load Voltage High (Voh) Low (Vol) Current High (loh) Low (lol) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Start-Up Time Jitter SM036 1 of 2 14 25 March 2010 Minimum 4.50 -16 45 - Nominal 50 - Maximum 50 0.55 16 55 5 10 5 pF Vdc mA % nS mS pS RMS Notes: 1. Inclusive of calibration @ 25C , frequency vs temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2. Oscillator output is enabled with no connection on pad 1 Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2010 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Package Characteristics Package Suggested Pad Layout Hermetically sealed ceramic package and metal cover Environmental Characteristics Temperature Cycle The specimen shall meet electrical characteristics after tested 5 cycles of -55C / 30 minutes and +125C / 30 minutes Hermetical No bubbles appear in Flourinert (FC-43) at 125C 5C for 5 minutes Solvent Resistance Marking will withstand immersion in Isopropyl Alcohol or Trichloroethylene Soldering Bypass capacitor, C-by, should be ceramic capacitor .01 uf General Conditions 260C max x 10 sec max x 2 times max or 230C max x 180 sec max x 1 time Typical Operation Data (Vapor phase reflow) 20 to 100 sec up to 215C, 50 sec at 215C, then down to room temperature per 1 to 5C / sec Test Circuit OSCILLOSCOPE Vcc Mechanical Characteristics Mechanical Shock Vibration Thermal Shock Solderability PROBE POWER SUPPLY MIL STD 883 Method 2002 The specimen shall meet electrical characteristics after tested by the following conditions: 10-55Hz 1.5mm Amplitude, 55-2000 Hz 20 G's, 2 hours for each plane After applied Thermal Shock of 260C max x 10 sec max x 2 times, or 230C max x 180 sec max, the specimen shall meet electrical characteristics (EIAJ-RCX-0102.101 Condition 1a) 1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%) 2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%) 3) Solder bath temperature: 235C 5C 4) Depth of immersion: Up to electrical terminal 5) Immersing time: Within 2 sec 0.5 sec into solder bath .01uf Output Waveform SYMMETRY Ordering Information Type: Clock 7.5x5.0mm Package 6 Temperature Range: 6 = -40 to 85C Frequency Tolerance: 1 = 25 ppm 2 = 50 ppm 3 = 100 ppm RoHS Solder Profile 044.736M 1 Supply Voltage: Omit = 5.0 Vdc FREQ COUNTER INPUT FOR E/D After performing the above procedures, a newly soldered coverage shall be greater than 90% HSM OSC Temperature 260C 260C 220C Output Frequency: 180C 150C Frequency Format -xxx.xM Minimum * -xxx.xxxxxxM Maximum* *Amount of numbers after the decimal point. M = MHz 120C 0 120 S Max. Example: To Order an HSM61 with an output frequency of: 4 MHz = HSM61-004.0M 44.736 MHz = HSM61-044.736M 125 MHz = HSM61-125.0M Time 10 S 60 S Max. 360 Sec. Max. Meets IPC/JEDEC J-STD-020C Tape and Reel Dimensions Dimensional Tolerance: .005" .02" (.508mm) (.127mm) Pin Connections 1: Enable/Disable 2: Ground 3: Output 4: Vcc Bulletin Page Meets EIA-481A and EIAJ-1009B 2,000 PCS/Reel Specifications subject to change without notice. All dimensions in inches. (c) Copyright 2010 The Connor-Winfield Corporation Revision Date SM036 2 of 2 14 25 March 2010