Solderless terminals RING TONGUE (R type) Vinyl-insulated (straight) B D d2 F L Actual File No.: E42024 Stud size Applicable Wire AWG#(mm2) American Metric 2 1-2 3 3-4 26 to 22 3.5 5-6 (0.2 to 0.5) 4 8 5 10 2 1-2 3 3-4 3 3-4 3 3-4 3.5 5-6 3.5 5-6 22 to 16 4 8 *(0.25 to 4 8 1.65) 5 10 5 10 6 1/4 8 5/16 10 3/8 2 1-2 3 3-4 3 3-4 3 3-4 3.5 5-6 3.5 5-6 3.5 5-6 4 8 4 8 16 to 14 4 8 (1.04 to 5 10 2.63) 5 10 5 10 6 1/4 8 5/16 10 3/8 12 1/2 14 1/2 16 5/8 20 3/4 3.5 5-6 3 3-4 4 8 4 8 5 10 5 10 6 1/4 12 to 10 6 1/4 (2.63 to 8 5/16 6.64) 8 5/16 10 3/8 12 1/2 14 1/2 16 5/8 18 11/16 20 3/4 LR20812 670021 Part No. JST V0.5-2 V0.5-3 V0.5-3.7 V0.5-4 V0.5-5 V1.25-2 V1.25-3 V1.25-MS3 V1.25-L3 V1.25-3.7 V1.25-M3 V1.25-M4 V1.25-4 V1.25-5NS V1.25-5 V1.25-6 V1.25-8 V1.25-10 V2-S2 V2-MS3 V2-S3.3 V2-3 V2-S3 V2-M3 V2-P3.5 V2-M4 V2-P4 V2-4 V2-M5 V2-5NS V2-5 V2-6 V2-8 V2-10 V2-12 V2-14 V2-16 V2-20 V5.5-S3 V5.5-3 V5.5-S4 V5.5-4 V5.5-5 V5.5-S5 V5.5-6 V5.5-S6 V5.5-S8 V5.5-8 V5.5-10 V5.5-12 V5.5-14 V5.5-16 V5.5-18 V5.5-20 JIS RAV1.25-3 RAV1.25-3.5 RAV1.25-4 RAV1.25-5 RAV2-3.5 RAV2-4 RAV2-5 RAV2-6 RAV2-8 RAV5.5-4 RAV5.5-5 RAV5.5-6 RAV5.5-8 RAV5.5-10 T : Material thickness Refer to page 141 for actual size of the terminal. Standard Dimensions mm (in.) o d2 2.2 (.087) 3.2 (.126) 3.7 (.146) 4.3 (.169) 5.3 (.209) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 21.0 (.827) 3.7 (.146) 3.2 (.126) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 6.4 (.252) 8.4 (.331) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 19.0 (.748) 21.0 (.827) B 5.2 (.205) 5.2 (.205) 6.6 (.260) 6.6 (.260) 8.0 (.315) 5.5 (.217) 5.5 (.217) 5.5 (.217) 8.0 (.315) 5.5 (.217) 6.6 (.260) 6.6 (.260) 8.0 (.315) 9.0 (.354) 8.0 (.315) 11.6 (.457) 11.6 (.457) 13.6 (.535) 6.4 (.252) 5.5 (.217) 6.4 (.252) 8.5 (.335) 6.4 (.252) 6.6 (.260) 7.0 (.276) 6.6 (.260) 7.0 (.276) 8.5 (.335) 8.5 (.335) 9.0 (.354) 9.5 (.374) 12.0 (.472) 12.0 (.472) 13.6 (.535) 19.0 (.748) 27.0 (1.063) 27.0 (1.063) 27.0 (1.063) 7.2 (.283) 9.5 (.374) 7.2 (.283) 9.5 (.374) 9.5 (.374) 13.2 (.520) 12.0 (.472) 13.2 (.520) 13.2 (.520) 15.0 (.591) 15.0 (.591) 19.2 (.756) 32.0 (1.260) 32.0 (1.260) 32.0 (1.260) 32.0 (1.260) L 16.4 (.646) 16.4 (.646) 19.0 (.748) 19.0 (.748) 19.0 (.748) 15.7 (.618) 15.7 (.618) 17.4 (.685) 20.0 (.787) 15.7 (.618) 18.6 (.732) 18.6 (.732) 20.0 (.787) 24.6 (.969) 20.0 (.787) 25.9 (1.020) 25.9 (1.020) 29.7 (1.169) 16.5 (.650) 17.4 (.685) 16.5 (.650) 21.0 (.827) 16.5 (.650) 18.6 (.732) 20.2 (.780) 18.6 (.732) 20.2 (.800) 21.0 (.827) 21.0 (.827) 24.5 (.965) 21.0 (.827) 26.0 (1.024) 26.0 (1.024) 29.7 (1.169) 35.2 (1.386) 43.7 (1.720) 43.7 (1.720) 43.7 (1.720) 23.0 (.906) 26.5 (1.403) 23.0 (.906) 26.5 (1.043) 26.5 (1.043) 29.1 (1.146) 32.5 (1.280) 29.1 (1.146) 29.1 (1.146) 34.7 (1.366) 34.7 (1.366) 39.1 (1.539) 54.8 (2.157) 54.8 (2.157) 54.8 (2.157) 54.8 (2.157) 5.8 5.8 7.7 7.7 7.0 4.0 4.0 5.6 7.0 4.0 6.3 6.3 7.0 11.1 7.0 11.1 11.1 13.9 4.3 5.6 4.3 7.8 4.3 6.3 7.7 6.3 7.7 7.8 7.8 11.0 7.3 11.0 11.0 13.9 16.7 21.2 21.2 21.2 5.9 8.3 5.9 8.3 8.3 9.0 13.0 9.0 9.0 13.7 13.7 16.0 25.3 25.3 25.3 25.3 Note:1) Products with the JIS mark conform to JIS C2805. 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. V2-4 -->VWS2-4). 4) Delivery lead times may vary depending on the product. Contact JST for details. 19 F (.228) (.228) (.303) (.303) (.276) (.157) (.157) (.220) (.276) (.157) (.248) (.248) (.276) (.437) (.276) (.437) (.437) (.547) (.169) (.220) (.169) (.307) (.169) (.248) (.303) (.248) (.303) (.307) (.307) (.433) (.287) (.433) (.433) (.547) (.657) (.835) (.835) (.835) (.232) (.327) (.232) (.327) (.327) (.354) (.512) (.354) (.354) (.539) (.539) (.630) (.996) (.996) (.996) (.996) Color Tool No. Qty/box 1.9 0.5 8.0 Yellow (.315) (.075) (.020) YNT-2622 YA-1 1,000 YA-2 BCT-0514 0.8 9.0 3.2 (.354) (.126) (.031) Red YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 Blue YNT-1614 YA-1 YA-2 YA-4 BCT-0514 oD T 0.8 9.0 3.9 (.354) (.154) (.031) 1,000 500 250 500 13.5 5.4 1.0 Yellow (.531) (.213) (.039) YNT-1210S YA-4 BCT-0514 250 Solderless terminals RING TONGUE (R type) Vinyl-insulated (flared) B D d2 F L Actual File No.: E42024 Stud size Applicable Wire AWG#(mm2) American Metric 2 1-2 3 3-4 26 to 22 3.5 5-6 (0.2 to 0.5) 4 8 5 10 2 1-2 3 3-4 3 3-4 3 3-4 3.5 5-6 22 to 16 3.5 5-6 *(0.25 to 4 8 1.65) 4 8 5 10 6 1/4 8 5/16 10 3/8 2 1-2 3 3-4 3 3-4 3 3-4 3.5 5-6 3.5 5-6 3.5 5-6 4 8 16 to 14 4 8 (1.04 to 4 8 2.63) 5 10 5 10 6 1/4 8 5/16 10 3/8 12 1/2 14 1/2 16 5/8 20 3/4 3 3-4 3 3-4 3.5 5-6 4 8 4 8 5 10 5 10 12 to 10 6 1/4 (2.63 to 6 1/4 6.64) 8 5/16 8 5/16 10 3/8 12 1/2 14 1/2 16 5/8 18 11/16 20 3/4 LR20812 670021 Part No. JST FV0.5-2 FV0.5-3 FV0.5-3.7 FV0.5-4 FV0.5-5 FV1.25-2 FV1.25-3 FV1.25-MS3 FV1.25-L3 FV1.25-3.7 FV1.25-M3 FV1.25-M4 FV1.25-4 FV1.25-5 FV1.25-6 FV1.25-8 FV1.25-10 FV2-S2 FV2-MS3 FV2-S3.3 FV2-3 FV2-S3 FV2-M3 FV2-P3.5 FV2-M4 FV2-P4 FV2-4 FV2-M5 FV2-5 FV2-6 FV2-8 FV2-10 FV2-12 FV2-14 FV2-16 FV2-20 FV5.5-S3.3 FV5.5-3 FV5.5-S3 FV5.5-S4 FV5.5-4 FV5.5-5 FV5.5-S5 FV5.5-6 FV5.5-S6 FV5.5-S8 FV5.5-8 FV5.5-10 FV5.5-12 FV5.5-14 FV5.5-16 FV5.5-18 FV5.5-20 JIS RBV1.25-3 RBV1.25-3.5 RBV1.25-4 RBV1.25-5 RBV2-3.5 RBV2-4 RBV2-5 RBV2-6 RBV2-8 RBV5.5-4 RBV5.5-5 RBV5.5-6 RBV5.5-8 RBV5.5-10 Refer to page 142 for actual size of the terminal. Standard T : Material thickness Dimensions mm (in.) o d2 2.2 (.087) 3.2 (.126) 3.7 (.146) 4.3 (.169) 5.3 (.209) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 21.0 (.827) 3.2 (.126) 3.2 (.126) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 6.4 (.252) 8.4 (.331) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 19.0 (.748) 21.0 (.827) B 5.2 (.205) 5.2 (.205) 6.6 (.260) 6.6 (.260) 8.0 (.315) 5.5 (.217) 5.5 (.217) 5.5 (.217) 8.0 (.315) 5.5 (.217) 6.6 (.260) 6.6 (.260) 8.0 (.315) 8.0 (.315) 11.6 (.457) 11.6 (.457) 13.6 (.535) 6.4 (.252) 5.5 (.217) 6.4 (.252) 8.5 (.335) 6.4 (.252) 6.6 (.260) 7.0 (.276) 6.6 (.260) 7.0 (.276) 8.5 (.335) 8.5 (.335) 9.5 (.374) 12.0 (.472) 12.0 (.472) 13.6 (.535) 19.0 (.748) 27.0 (1.063) 27.0 (1.063) 27.0 (1.063) 7.2 (.283) 9.5 (.374) 7.2 (.283) 7.2 (.283) 9.5 (.374) 9.5 (.374) 13.2 (.520) 12.0 (.472) 13.2 (.520) 13.2 (.520) 15.0 (.591) 15.0 (.591) 19.2 (.756) 32.0 (1.260) 32.0 (1.260) 32.0 (1.260) 32.0 (1.260) L 16.4 (.646) 16.4 (.646) 19.0 (.748) 19.0 (.748) 19.0 (.748) 15.7 (.618) 15.7 (.618) 17.4 (.685) 20.0 (.787) 15.7 (.618) 18.6 (.732) 18.6 (.732) 20.0 (.787) 20.0 (.787) 25.9 (1.020) 25.9 (1.020) 29.7 (1.169) 16.5 (.650) 17.4 (.685) 16.5 (.650) 21.0 (.827) 16.5 (.650) 18.6 (.732) 20.2 (.780) 18.6 (.732) 20.2 (.800) 21.0 (.827) 21.0 (.827) 21.0 (.827) 26.0 (1.024) 26.0 (1.024) 29.7 (1.169) 35.2 (1.386) 43.7 (1.720) 43.7 (1.720) 43.7 (1.720) 23.0 (.906) 26.5 (1.403) 23.0 (.906) 23.0 (.906) 26.5 (1.043) 26.5 (1.043) 29.1 (1.146) 32.5 (1.280) 29.1 (1.146) 29.1 (1.146) 34.7 (1.366) 34.7 (1.366) 39.1 (1.539) 54.8 (2.157) 54.8 (2.157) 54.8 (2.157) 54.8 (2.157) 5.8 5.8 7.7 7.7 7.0 4.0 4.0 5.6 7.0 4.0 6.3 6.3 7.0 7.0 11.1 11.1 13.9 4.3 5.6 4.3 7.8 4.3 6.3 7.7 6.3 7.7 7.8 7.8 7.3 11.0 11.0 13.9 16.7 21.2 21.2 21.2 5.9 8.3 5.9 5.9 8.3 8.3 9.0 13.0 9.0 9.0 13.7 13.7 16.0 25.3 25.3 25.3 25.3 F (.228) (.228) (.303) (.303) (.276) (.157) (.157) (.220) (.276) (.157) (.248) (.248) (.276) (.276) (.437) (.437) (.547) (.169) (.220) (.169) (.307) (.169) (.248) (.303) (.248) (.303) (.307) (.307) (.287) (.433) (.433) (.547) (.657) (.835) (.835) (.835) (.232) (.327) (.232) (.232) (.327) (.327) (.354) (.512) (.354) (.354) (.539) (.539) (.630) (.996) (.996) (.996) (.996) Color Tool No. Qty/box 2.9 0.5 8.0 Yellow (.315) (.114) (.020) YNT-2622 YA-1 1,000 YA-2 BCT-0514 4.0 0.8 9.0 (.354) (.157) (.031) Red YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 Blue YNT-1614 1,000 YA-1 YA-2 YA-4 BCT-0514 oD T 0.8 9.0 4.5 (.354) (.177) (.031) 500 250 500 13.5 6.8 1.0 Yellow (.531) (.268) (.039) YNT-1210S YA-4 BCT-0514 250 Note:1) Products with the JIS mark conform to JIS C2805. 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FV2-4 -->FVWS2-4). 4) Delivery lead times may vary depending on the product. Contact JST for details. 20 Solderless terminals RING TONGUE (R type) Vinyl-insulated (funnel-entry) B D d2 F L T : Material thickness File No.: Applicable Wire AWG#(mm2) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 LR20812 Stud size American 1-2 3-4 3-4 3-4 5-6 5-6 8 8 10 1/4 5/6 3/8 1-2 3-4 3-4 3-4 5-6 5-6 5-6 8 8 8 10 10 1/4 5/16 3/8 3-4 5-6 8 8 10 10 5-6 5/16 5/16 3/8 3/8 Metric 2 3 3 3 3.5 3.5 4 4 5 6 8 10 2 3 3 3 3.5 3.5 3.5 4 4 4 5 5 6 8 10 3 3.5 4 4 5 5 6 6 8 8 10 Part No. FVX1.25-2 FVX1.25-3 FVX1.25-MS3 FVX1.25-L3 FVX1.25-3.7 FVX1.25-M3 FVX1.25-M4 FVX1.25-4 FVX1.25-5 FVX1.25-6 FVX1.25-8 FVX1.25-10 FVX2-S2 FVX2-MS3 FVX2-S3.3 FVX2-3 FVX2-S3 FVX2-M3 FVX2-P3.5 FVX2-M4 FVX2-P4 FVX2-4 FVX2-M5 FVX2-5 FVX2-6 FVX2-8 FVX2-10 FVX5.5-3 FVX5.5-S3 FVX5.5-S4 FVX5.5-4 FVX5.5-5 FVX5.5-S5 FVX5.5-6 FVX5.5-S6 FVX5.5-S8 FVX5.5-8 FVX5.5-10 Standard Dimensions mm (in.) o d2 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 3.2 (.126) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 6.4 (.252) 8.4 (.331) 8.4 (.331) 10.5 (.413) B 5.5 (.217) 5.5 (.217) 5.5 (.217) 8.0 (.315) 5.5 (.217) 6.6 (.260) 6.6 (.260) 8.0 (.315) 8.0 (.315) 11.6 (.457) 11.6 (.457) 13.6 (.535) 6.4 (.252) 5.5 (.217) 6.4 (.252) 8.5 (.335) 6.4 (.252) 6.6 (.260) 7.0 (.276) 6.6 (.260) 7.0 (.276) 8.5 (.335) 8.5 (.335) 9.5 (.374) 12.0 (.472) 12.0 (.472) 13.6 (.535) 9.5 (.374) 7.2 (.283) 7.2 (.283) 9.5 (.374) 9.5 (.374) 13.2 (.520) 12.0 (.472) 13.2 (.520) 13.2 (.520) 15.0 (.591) 15.0 (.591) L 17.5 (.689) 17.5 (.689) 19.2 (.756) 21.8 (.858) 17.5 (.689) 20.4 (.803) 20.4 (.803) 21.8 (.858) 21.8 (.858) 27.7(1.091) 27.7(1.091) 31.5(1.240) 18.3 (.720) 19.2 (.756) 18.3 (.720) 22.8 (.898) 18.3 (.720) 20.4 (.803) 22.0 (.866) 20.4 (.803) 22.0 (.866) 22.8 (.898) 22.8 (.898) 22.8 (.898) 27.8(1.094) 27.8(1.094) 31.5(1.240) 27.0(1.063) 23.5 (.925) 23.5 (.925) 27.0(1.063) 27.0(1.063) 29.6(1.165) 33.0(1.299) 29.6(1.165) 29.6(1.165) 35.2(1.386) 35.2(1.386) F 4.0 (.157) 4.0 (.157) 5.6 (.221) 7.0 (.276) 4.0 (.157) 6.3 (.248) 6.3 (.248) 7.0 (.276) 7.0 (.276) 11.1 (.437) 11.1 (.437) 13.9 (.547) 4.3 (.169) 5.6 (.221) 4.3 (.169) 7.8 (.307) 4.3 (.169) 6.3 (.248) 7.7 (.303) 6.3 (.248) 7.7 (.303) 7.8 (.307) 7.8 (.307) 7.3 (.287) 11.0 (.433) 11.0 (.433) 13.9 (.547) 8.3 (.327) 5.9 (.232) 5.9 (.232) 8.3 (.327) 8.3 (.327) 9.0 (.354) 13.0 (.512) 9.0 (.354) 9.0 (.354) 13.7 (.539) 13.7 (.539) Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FVX2-4 -->FVXWS2-4). 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) Delivery lead times may vary depending on the product. Contact JST for details. 21 oD T 0.8 10.8 4.0 (.425) (.157) (.031) Color Red Tool No. Qty/box YNT-2216 1,000 YA-1 YA-2 YA-4 BCT-0514 500 0.8 10.8 4.6 (.425) (.181) (.031) Blue YNT-1614 1,000 YA-1 YA-2 YA-4 BCT-0514 500 500 1.0 14.0 6.8 Yellow (.551) (.268) (.039) YNT-1210S YA-4 BCT-0514 250 Solderless terminals RING TONGUE (R type) Vinyl-insulated (funnel-entry) B D d2 F L T : Material thickness File No.: Applicable Wire AWG#(mm2) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 LR20812 Stud size American 1-2 3-4 3-4 3-4 5-6 5-6 8 8 10 1/4 5/6 3/8 1-2 3-4 3-4 3-4 5-6 5-6 5-6 8 8 8 10 10 1/4 5/16 3/8 1/2 1/2 5/8 3/4 3-4 5-6 8 8 10 10 1/4 1/4 5/16 5/16 3/8 1/2 1/2 5/8 11/16 3/4 Metric 2 3 3 3 3.5 3.5 4 4 5 6 8 10 2 3 3 3 3.5 3.5 3.5 4 4 4 5 5 6 8 10 12 14 16 20 3 3.5 4 4 5 5 6 6 8 8 10 12 14 16 18 20 Part No. FVL1.25-2 FVL1.25-3 FVL1.25-MS3 FVL1.25-L3 FVL1.25-3.7 FVL1.25-M3 FVL1.25-M4 FVL1.25-4 FVL1.25-5 FVL1.25-6 FVL1.25-8 FVL1.25-10 FVL2-S2 FVL2-MS3 FVL2-S3.3 FVL2-3 FVL2-S3 FVL2-M3 FVL2-P3.5 FVL2-M4 FVL2-P4 FVL2-4 FVL2-M5 FVL2-5 FVL2-6 FVL2-8 FVL2-10 FVL2-12 FVL2-14 FVL2-16 FVL2-20 FVL5.5-3 FVL5.5-S3 FVL5.5-S4 FVL5.5-4 FVL5.5-5 FVL5.5-S5 FVL5.5-6 FVL5.5-S6 FVL5.5-S8 FVL5.5-8 FVL5.5-10 FVL5.5-12 FVL5.5-14 FVL5.5-16 FVL5.5-18 FVL5.5-20 Standard Dimensions mm (in.) o d2 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 2.2 (.087) 3.2 (.126) 3.2 (.126) 3.2 (.126) 3.7 (.146) 3.7 (.146) 3.7 (.146) 4.3 (.169) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 21.0 (.827) 3.2 (.126) 3.7 (.146) 4.3 (.169) 4.3 (.169) 5.3 (.209) 5.3 (.209) 6.4 (.252) 6.4 (.252) 8.4 (.331) 8.4 (.331) 10.5 (.413) 13.0 (.512) 15.0 (.591) 17.0 (.669) 19.0 (.748) 21.0 (.827) B 5.5 (.217) 5.5 (.217) 5.5 (.217) 8.0 (.315) 5.5 (.217) 6.6 (.260) 6.6 (.260) 8.0 (.315) 8.0 (.315) 11.6 (.457) 11.6 (.457) 13.6 (.535) 6.4 (.252) 5.5 (.217) 6.4 (.252) 8.5 (.335) 6.4 (.252) 6.6 (.260) 7.0 (.276) 6.6 (.260) 7.0 (.276) 8.5 (.335) 8.5 (.335) 9.5 (.374) 12.0 (.472) 12.0 (.472) 13.6 (.535) 19.0 (.748) 27.0(1.063) 27.0(1.063) 27.0(1.063) 9.5 (.374) 7.2 (.283) 7.2 (.283) 9.5 (.374) 9.5 (.374) 13.2 (.520) 12.0 (.472) 13.2 (.520) 13.2 (.520) 15.0 (.591) 15.0 (.591) 19.2 (.756) 32.0(1.260) 32.0(1.260) 32.0(1.260) 32.0(1.260) L 16.1 (.634) 16.1 (.634) 17.8 (.701) 20.4 (.803) 16.1 (.634) 19.0 (.748) 19.0 (.748) 20.4 (.803) 20.4 (.803) 26.3(1.035) 26.3(1.035) 30.1(1.185) 16.9 (.665) 17.8 (.701) 16.9 (.665) 21.4 (.843) 16.9 (.665) 19.0 (.748) 20.6 (.811) 19.0 (.748) 20.6 (.811) 21.4 (.843) 21.4 (.843) 21.4 (.843) 26.4(1.039) 26.4(1.039) 30.1(1.185) 35.6(1.402) 44.1(1.736) 44.1(1.736) 44.1(1.736) 26.8(1.055) 23.3 (.917) 23.3 (.917) 26.8(1.055) 26.8(1.055) 29.4(1.157) 32.8(1.291) 29.4(1.157) 29.4(1.157) 35.0(1.378) 35.0(1.378) 39.4(1.551) 55.1(2.169) 55.1(2.169) 55.1(2.169) 55.1(2.169) F 4.0 (.157) 4.0 (.157) 5.6 (.221) 7.0 (.276) 4.0 (.157) 6.3 (.248) 6.3 (.248) 7.0 (.276) 7.0 (.276) 11.1 (.437) 11.1 (.437) 13.9 (.547) 4.3 (.169) 5.6 (.221) 4.3 (.169) 7.8 (.307) 4.3 (.169) 6.3 (.248) 7.7 (.303) 6.3 (.248) 7.7 (.303) 7.8 (.307) 7.8 (.307) 7.3 (.287) 11.0 (.433) 11.0 (.433) 13.9 (.547) 16.7 (.657) 21.2 (.835) 21.2 (.835) 21.2 (.835) 8.3 (.327) 5.9 (.232) 5.9 (.232) 8.3 (.327) 8.3 (.327) 9.0 (.354) 13.0 (.512) 9.0 (.354) 9.0 (.354) 13.7 (.539) 13.7 (.539) 16.0 (.630) 25.3 (.996) 25.3 (.996) 25.3 (.996) 25.3 (.996) oD T 0.8 9.4 4.2 (.370) (.165) (.031) 4.7 0.8 9.4 (.370) (.185) (.031) Color Tool No. Qty/box Red YNT-2216 YA-1 1,000 YA-2 YA-4 BCT-0514 Blue YNT-1614 1,000 YA-1 YA-2 YA-4 BCT-0514 500 250 500 13.8 1.0 7.0 Yellow (.543) (.276) (.039) YNT-1210S YA-4 BCT-0514 250 Note:1) The part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. FVL2-4 -->FVLWS2-4). 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) Delivery lead times may vary depending on the product. Contact JST for details. 22