STANDARD PLCC SOCKETS
For Through Board Mount
www.mill-max.com 516-922-6000
92
Series 940
Ordering Information
•Note: Not end stackable.
•Accepts JEDEC PLCCs
MS-016 & MS-018
leaded plastic substrates.
•Insulator material is
glass reinforced PPS.
•Standoffs provide clear-
ance for heat dissipation
and cleaning.
• Internal standoffs insure
proper positioning of chip
carrier in socket.
•Contacts are plated with
150μ” tin or 150μ” tin/lead.
• Pre-lubricated available.
20 0.613 0.200 0.400 38 940-XX-020-24-00X000
28 0.713 0.300 0.500 33 940-XX-028-24-00X000
32* .813/.713 .400/.300 .600/.500 29 *RECTANGULAR 940-XX-032-24-00X000
44 0.913 0.500 0.700 26 940-XX-044-24-00X000
52 1.013 0.600 0.800 23 940-XX-052-24-00X000
68 1.213 0.800 1.000 19 940-XX-068-24-00X000
84 1.413 1.000 1.200 16 940-XX-084-24-00X000
100 1.603 1.200 1.400 25 940-XX-100-24-00X000
X = 0 Not Lubricated
X = 1 Pre-Lubricated
No. of
Contacts
AB
C
X 490
490
!
"#
0#",!9/54
$)!(/,%
$)!
3/,$%20!$
Application of Pre-Lubricated Sockets:
Intended as a general-pupose lubricant for tin/lead
connectors, Nyetact 502M-20-UV is a solvent disper-
sion of a water-resistant, non-melting grease based on
a plastic-compatible, synthetic hydrocarbon oil. Useful
temperature range: -40° to 120°C. The active lubricant
is present at 20% (by weight) in mineral spirits.
The pre-lubrication increases the reliability of standard
sockets by preventing fretting corrosion.
Pre-lubricated sockets can be used for any long life
applications having a tin-tin interface.
There is no degradation of lubrication during soldering
or final wash. Contact the factory for other pre-lubricat-
ed products.
See page 96 for lubrication specifications.
Quantity
per Tube
Plating Code
XX = 99 150µ” Sn/Pb
XX = 44 150µ” Sn
2O(3
%#
