CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 1 of 35 DATE 05.08.2013 Specification for Production Applicant / Manufacturer Panasonic Industrial Devices Europe GmbH Hardware Zeppelinstrasse 19 21337 Luneburg Germany Applicant / Manufacturer Software Please refer to chapter 25 / 25.1 Information regarding Software Versions Software Version Please refer to chapter 25 / 25.1 Information regarding Software Versions Bluetooth QDL ID Qualified Design Listing (QDL) ID: B022941 As Controller Sub-System Listing for PAN17xx Series. By purchase of any of products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required without notification. Power Electronics R&D Center Wireless Connectivity Panasonic Industrial Devices Europe GmbH APPROVED genehmigt CHECKED gepruft DESIGNED erstellt CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 2 of 35 DATE 05.08.2013 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Scope of this Document .................................................................................................. 4 Difference PAN1720 / PAN1721 ..................................................................................... 4 Difference PAN172x / PAN171x ..................................................................................... 4 Key Features................................................................................................................... 4 Bluetooth Low Energy ..................................................................................................... 6 Applications for the Module............................................................................................. 6 Description for the Module .............................................................................................. 6 Detailed Description ........................................................................................................ 7 8.1. PAN172x Terminal Layout..................................................................................... 7 8.2. Crossreference GPIO PAN-Module to BlueRadios-Module .................................. 9 Bluetooth Features........................................................................................................ 10 PAN172x Block Diagram............................................................................................... 10 Test Conditions ............................................................................................................. 11 General Device Requirements and Operation .............................................................. 11 12.1. Absolute Maximum Ratings ................................................................................. 11 12.2. Recommended Operating Conditions.................................................................. 11 12.3. PAN1720 Current Consumption .......................................................................... 12 Bluetooth RF Performance............................................................................................ 13 13.1. PAN1720 Bluetooth Characteristics .................................................................... 13 13.2. PAN1721 Bluetooth Characteristics .................................................................... 13 13.3. PAN17XX Spurious Emission.............................................................................. 13 Soldering Temperature-Time Profile (for reflow soldering) ........................................... 14 14.1. For lead solder..................................................................................................... 14 14.2. For leadfree solder............................................................................................... 14 PAN172x Module Dimension ........................................................................................ 15 PAN171x Module Dimension ........................................................................................ 16 PAN172x FootPrint of the Module................................................................................. 17 PAN171x FootPrint of the Module................................................................................. 18 Case Marking ................................................................................................................ 19 19.1. Example for Marking............................................................................................ 19 19.2. Marking Definition ................................................................................................ 19 Mechanical Requirements............................................................................................. 19 Development of Applications......................................................................................... 20 Reliability Tests ............................................................................................................. 20 Cautions ........................................................................................................................ 20 23.1. Design Notes ....................................................................................................... 20 23.2. Installation Notes ................................................................................................. 21 23.3. Usage Conditions Notes ...................................................................................... 21 23.4. Storage Notes...................................................................................................... 22 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. No. DS-17xx-2400-102 REV. 1.9 PAGE 3 of 35 DATE 05.08.2013 23.5. Safety Cautions ................................................................................................... 22 23.6. Other cautions ..................................................................................................... 22 Packaging ..................................................................................................................... 24 24.1. PAN172x Tape Dimension .................................................................................. 24 24.2. PAN171x Tape Dimension .................................................................................. 25 24.3. Packing in Tape ................................................................................................... 26 24.4. Component Direction ........................................................................................... 26 24.5. Reel Dimension ................................................................................................... 27 24.6. Label for Package................................................................................................ 28 24.7. Total Package...................................................................................................... 28 Ordering Information ..................................................................................................... 29 25.1. Information regarding Software Versions ............................................................ 29 RoHS and REACH Declaration..................................................................................... 30 Data Sheet Status ......................................................................................................... 31 History for this Document.............................................................................................. 31 Related Documents....................................................................................................... 31 General Information ...................................................................................................... 32 Regulatory Information.................................................................................................. 32 31.1. FCC Notice .......................................................................................................... 32 31.2. Caution ................................................................................................................ 32 31.3. Labeling Requirements........................................................................................ 33 31.4. Antenna Warning ................................................................................................. 33 31.5. Approved Antenna List ........................................................................................ 33 31.6. RF Exposure PAN17xx........................................................................................ 33 Industry Canada Certification........................................................................................ 34 32.1. IC Notice .............................................................................................................. 34 32.2. Labeling Requirements........................................................................................ 34 Bluetooth Certification ................................................................................................... 34 European R&TTE Declaration of Conformity ................................................................ 35 Life Support Policy ........................................................................................................ 35 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 4 of 35 DATE 05.08.2013 1. SCOPE OF THIS DOCUMENT This product specification applies to Panasonic's, Class 2, Bluetooth(R) 1 low energy single mode module, series number: PAN1720 (CC2540 from Texas Instruments) and PAN1721 (CC2541 from Texas Instruments). 2. DIFFERENCE PAN1720 / PAN1721 Both the PAN1720 and PAN1721 are refered to as the PAN172x in this document. The PAN1721 is pin-compatible with the PAN1720, with the exception that USB is the hardware communication interface on the PAN1720 and I2C is the hardware communication interface on the PAN1720. Compared to the PAN1720, the PAN1721 provides lower RF current consumption. The PAN1721 does not have the USB interface found on the PAN1720, and provides lower maximum output power in TX mode. Additional details , which have an impact on the module can be found in the datasheets from Texas Instruments. CC2540 from Texas Instruments CC2541 from Texas Instruments Both ICs the CC2540 as well as the CC2541 come with an internal 256 KB flash memory. 3. DIFFERENCE PAN172X / PAN171X The PAN171x are the non antenna version where the PAN172x are the versions with antenna. 4. KEY FEATURES 1 Bluetooth Low Energy Single Mode 4.0 Surface mount type 15.6 x 8.7 x 1.8 mm Up to 4.0 dBm Tx power (typical) with transmit power control CC2541 has typically 0dBm Tx power High sensitivity (-94 dBm typ.) Texas Instrument's CC2540/CC2541 Single Chip BLE Solution inside High performance low power 8051 Microcontroller core No external components needed Fast Connection Setup Internal crystal oscillator (32MHz) Internal 32khz crystal oscillator for Sleep Timer Two powerful USARTs USB or I2C interface Powerful five channel DMA Bluetooth is a registered trademark of the Bluetooth Special Interest Group. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 5 of 35 DATE 05.08.2013 Latest Profiles included e.g. Battery Monitor and Temperature sensor Integrated shielding to resist EMI Manufactured in conformance with RoHS PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 6 of 35 DATE 05.08.2013 5. BLUETOOTH LOW ENERGY Bluetooth Low Energy (BLE), part of Bluetooth Ver. 4.0, specifies two types of implementation: Single mode and dual mode. Single mode devices implement the low energy specification and consume just a fraction of the power of classic Bluetooth, allowing the short-range wireless standard to extend to coin cell battery applications for the first time. Dual mode devices combine low energy with the power of classic Bluetooth and are likely to become a de facto feature in almost all new Bluetooth enabled cellular phones and computers. Single mode Bluetooth 4.0 Low Energy is not backwards compatible with previous Bluetooth standards. Dual mode Bluetooth 4.0 Low Energy is backwards compatible and well suited for gateway applications, but is not practical for low power devices. 6. APPLICATIONS FOR THE MODULE All Embedded Wireless Applications Access Points Industrial Control Medical Scanners Wireless Sensors Low Power Proximity Smart Phone Access Points Temperature Wellness Sports 7. DESCRIPTION FOR THE MODULE The PAN172x is a short-range, Class 2, BLE single mode module for implementing Bluetooth functionality into various electronic devices. A block diagram can be found in chapter 10. The PAN172x is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The PAN172x combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, insystem programmable flash memory, 8-KB RAM, and many other powerful supporting features and peripherals. The PAN172x is suitable for systems where very low power consumption is required. Very lowpower sleep modes are available. Short transition times between operating modes further enable low power consumption. Panasonic offers Bluetooth low energy protocol stacks and applications from Texas Instruments and BlueRadios. The Bluetooth low energy protocol stack from Texas Instruments, is a flexible and costeffective single-mode Bluetooth low energy solution. The BlueRadios stack enables rapid and low cost development using an AT command set without the need for a complier. Additional advantages include UART programming, over-the-air-updates, easy integration "C" library framework, serial streaming of data, and smart phone libraries and applications. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 7 of 35 DATE 05.08.2013 Refer to [1] PAN172xETU Design-Guide and chapter 25 Ordering Information. Please contact your local sales office for further details on additional options and services: www.panasonic.com/rfmodules for the US, http://industrial.panasonic.com/eu/i/29606/wireless_modules/wireless_modules.html for EU or write an e-mail to wireless@eu.panasonic.com. 8. DETAILED DESCRIPTION 8.1. PAN172X TERMINAL LAYOUT PAN17x1 I2C pins are marked with a blue circle. PAN171x antenna pin is marked with a blue circle. 8.70 mm 1.35 1.2 1.35 Top View, Application PCB PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 PAGE 8 of 35 DATE 05.08.2013 No Pin Name Pin Type Description A1 A2 A3 A4 A5 A6 A7 A8 A9 A11 A12 B1 B2 B3 B4 B5 B6 B7 B8 B9 C1 C2 C3 C4 C5 C6 C7 C8 C9 D1 D2 D3 D4 D5 D6 D7 D8 D9 E1 E2 E3 E4 E5 E6 E7 E8 E9 F1 F2 F3 F4 F5 F6 F7 F8 F9 F11 F12 GND P1.0 Reset VCC VCC VCC GND NC GND GND GND P1.3 P1.2 P1.1 P0.6 NC P0.1 P0.0 NC NC NC P1.4 P1.5 P0.7 NC NC NC GND GND DVDD_USB USB_N USB_P NC NC NC GND GND NC/RF P2.1/DD P2.2/DC DGND_USB NC NC P0.2/RX/MISO NC GND GND GND P1.6 P1.7 P2.0 P0.4/CTS/CS NC P0.3/TX/MOSI P0.5/RTS/CLK GND GND GND Ground Pin Digital I/O Digital Input Power Power Power Ground Pin Connect to Ground Port 1.0 - 20mA drive capability Reset, active-low 2V - 3.6V analog/digital power supply connection 2V - 3.6V analog/digital power supply connection 2V - 3.6V analog/digital power supply connection Connect to Ground Not Connected Connect to Ground Connect to Ground Connect to Ground Port 1.3 Port 1.2 Port 1.1 - 20mA drive capability Port 0.6 Not Connected Port 0.1 Port 0.0 Not Connected Not Connected Not Connected Port 1.4 / BR-SW UART CTS Port 1.5 / BR-SW UART RTS Port 0.7 Not Connected Not Connected Not Connected Connect to Ground Connect to Ground 2V - 3.6V digital power supply connection USB N / PAN17x1 I2C SDA // Leave floating if not used. USB P / PAN17x1 I2C SCL // Leave floating if not used. Not Connected Not Connected Not Connected Connect to Ground Connect to Ground PAN172x Not Connected/50 ohm RF_Out PAN171x Port 2.1 / Programming Interface DD Port 2.2 / Programming Interface DC Connect to Ground Not Connected Not Connected Port 0.2 / TI-SW UART RX / SPI MISO Not Connected Connect to Ground Connect to Ground Connect to Ground Port 1.6 / BR-SW UART TX Port 1.7 / BR-SW UART RX Port 2.0 Port 0.4 / TI-SW UART CTS / SPI CS Not Connected Port 0.3 / TI-SW UART TX /SPI MOSI Port 0.5 / TI-SW UART RTS /SPI CLK Connect to Ground Connect to Ground Connect to Ground Ground Pin Ground Pin Ground Pin Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Ground Pin Ground Pin Power (digital) Digital I/O Digital I/O Ground Pin Ground Pin Digital I/O Digital I/O Ground Pin Digital I/O Ground Pin Ground Pin Ground Pin Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Ground Pin Ground Pin Ground Pin PANASONIC INDUSTRIAL DEVICES EUROPE GMBH REV. 1.9 www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 9 of 35 DATE 05.08.2013 8.2. CROSSREFERENCE GPIO PAN-MODULE TO BLUERADIOS-MODULE PAN17xx-BR BlueRadios No Pin Name No Pin Name B7 B6 E6 F7 F5 F8 B4 C4 A2 B3 B2 B1 C2 C3 F2 F3 F4 E1 E2 P0.0 P0.1 P0.2 / MISO P0.3 / MOSI P0.4 / CS P0.5 / CLK P0.6 P0.7 P1.0 GPIO P1.1 GPIO P1.2 GPIO P1.3 GPIO P1.4 / UART CTS P1.5 / UART RTS P1.6 GPIO / UART TXD P1.7 GPIO / UART RXD P2.0 GPIO P2.1 / DD P2.2 / DC 21 4 5 8 6 7 26 25 23 24 27 22 11 12 13 14 19 28 29 ADC_0 ADC_1 SPI_MISO SPI_MOSI SPI_CSB SPI_CLK PIO_3 PIO_6 PIO_2 PIO_5 PIO_8 PIO_9 UART_CTS UART_RTS UART_TX UART_RX PIO_14 PIO_4 PIO_7 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 10 of 35 DATE 05.08.2013 9. BLUETOOTH FEATURES Bluetooth 4.0 single mode low energy technology. Class 2 TX power w/o external PA, improving link robustness. Excellent link budget (up to 96 dB), enabling long-range applications. Accurate digital received signal-strength indicator (RSSI) Integrates the new low power profiles and services Embedded BT-Stack available 10. PAN172X BLOCK DIAGRAM PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION No. DS-17xx-2400-102 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT REV. 1.9 PAGE 11 of 35 DATE 05.08.2013 11. TEST CONDITIONS Measurements shall be made under operating free-air temperature range unless otherwise specified. Temperature Humidity Supply Voltage 25 10C 40 to 85%RH 3.3V 12. GENERAL DEVICE REQUIREMENTS AND OPERATION All specifications are over temperature and process, unless indicated otherwise. 12.1. ABSOLUTE MAXIMUM RATINGS No See 2 Value Unit -0.3 to 3.9 V V Ratings Over Operating Free-Air Temperature Range 1 Supply voltage All supply pins must have the same voltage 2 Voltage on any digital pin -0.3 to VDD+0.3 <3,9 3 Operating ambient temperature range -40 to 85 C 4 Storage temperature range -40 to 125 C 5 Bluetooth RF inputs 10 dBm 6 ESD: All pads, according to human-body model, JEDEC STD 22, method A114 According to charged-device model, JEDEC STD 22, method C101 1000 500 V 12.2. RECOMMENDED OPERATING CONDITIONS 2 No Rating Min Max Unit 1 Power supply voltage 2 3.6 V 2 Maximum ambient operating temperature -40 85 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 12 of 35 DATE 05.08.2013 12.3. PAN1720 CURRENT CONSUMPTION The current consumption is dependant on the user scenario and the setup and timing in the low power modes. The total power consumption can be optimized by adjusting the scan windows and intervals. Please refer for the latest information for different power modes to the chapter "Electrical Characteristics" in Texas Instruments datasheet, refer to [2]. As indication below are typical values from CC2540 datasheet. For PAN1721 refer to CC2541 datasheet. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION No. DS-17xx-2400-102 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT REV. 1.9 PAGE 13 of 35 DATE 05.08.2013 13. BLUETOOTH RF PERFORMANCE 13.1. PAN1720 BLUETOOTH CHARACTERISTICS No Characteristics 1 Operation frequency range 2 Channel spacing 3 4 Output Power Sensitivity, High Gain Mode Condition Min Typ 2402 Maximum setting, measured at single ended 50ohm. Minimum setting, measured at single ended 50ohm. Max BT Spec 2480 Unit MHz 2 MHz 4 dBm -24 dBm High-gain mode -93.0 -70 Standard mode -92.5 -70 dBm 13.2. PAN1721 BLUETOOTH CHARACTERISTICS No Characteristics 1 Operation frequency range 2 Channel spacing 3 Output Power 4 Sensitivity, High Gain Mode Condition Min Typ 2402 Maximum setting, measured at single ended 50ohm. Minimum setting, measured at single ended 50ohm. Max BT Spec 2480 Unit MHz 2 MHz 0 dBm -24 dBm High-gain mode -93.0 -70 Standard mode -92.5 -70 dBm 13.3. PAN17XX SPURIOUS EMISSION No Characteristics Condition 1 Spurious emissions Conducted measurement with a 50- single-ended load. Complies with EN 300 328, EN 300 440 class 2, FCC CFR47, Part 15 and ARIB STD-T-66 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH Typ Max Unit -41 dBm www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 14 of 35 DATE 05.08.2013 14. SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING) 14.1. FOR LEAD SOLDER 10 1s Recommended temp. profile for reflow soldering 30 +20/-10s 235C max. Temp.[C] 220 5C 200C 150 10C 90 30s Time [s] 14.2. FOR LEADFREE SOLDER Our used temp. profile for reflow soldering Temp.[C] 30 +20/-10s 230C -250C max. 220C 150C - 190C 90 30s Time [s] Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 15 of 35 DATE 05.08.2013 15. PAN172X MODULE DIMENSION No. Item Dimension Tolerance 1 Width 8.70 0.20 2 Length 15.60 0.20 3 Height 1.80 0.20 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH Remark With case www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 16 of 35 DATE 05.08.2013 16. PAN171X MODULE DIMENSION No. Item Dimension Tolerance 1 Width 8.70 0.20 2 Length 11.60 0.20 3 Height 1.80 0.20 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH Remark With case www.pideu.panasonic.de CLASSIFICATION No. DS-17xx-2400-102 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT REV. 1.9 PAGE 17 of 35 DATE 05.08.2013 17. PAN172X FOOTPRINT OF THE MODULE All dimensions are in millimeters. The outer dimensions have a tolerance of 0.2mm. Top view, Application PCB 15.6 mm 5.0 1.0 0.6 1.2 2.4 F1 F2 F3 F4 F5 F6 F7 F8 F9 E1 E2 E3 E4 E5 E6 E7 E8 E9 D1 D2 D3 D4 D5 D6 D7 D8 D9 C1 C2 C3 C4 C5 C6 C7 C8 C9 B1 B2 B3 B4 B5 B6 B7 B8 B9 A1 A2 A3 A4 A5 A6 A7 A8 A9 F11 F12 A11 A12 0.6 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 18 of 35 DATE 05.08.2013 18. PAN171X FOOTPRINT OF THE MODULE All dimensions are in millimeters. The outer dimensions have a tolerance of 0.2mm. Top view, Application PCB PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION No. DS-17xx-2400-102 PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT REV. 1.9 PAGE 19 of 35 DATE 05.08.2013 19. CASE MARKING 2 No. Remark 1 Marking for Pin 1 (Circle 0,15 mm) 2 2D-Code, for internal usage only and can be change without any notice 3 Marking definition see below 3 1 19.1. EXAMPLE FOR MARKING P E Y F A N Y C N 1 7 2 W 8 9 8 W W D L C I D : 0 H W / S W 2 0 A x K F L T 7 V P A N 1 7 19.2. MARKING DEFINITION (1) Pin1 marking (2) 2D code (Serial number) (3) Marking: PAN17xx (Model Name), HW/SW (Hardware/Software version) ENW89820AxKF (Part Number, refer to chapter 25 Ordering Information) Lot code (YearYear, WeekWeek, Day, LotLot) ES (Engineering Sample marking) Note: For available Software Versions, refer to [1] PAN172xETU Design-Guide. and chapter 25 Ordering Information. 20. MECHANICAL REQUIREMENTS No. Item 1 Solderability 2 Resistance to soldering heat Limit Condition More than 75% of the soldering area shall be coated by solder It shall be satisfied electrical requirements and not be mechanical damage Reflow soldering with recommendable temperature profile PANASONIC INDUSTRIAL DEVICES EUROPE GMBH See chapter 14.2 www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 20 of 35 DATE 05.08.2013 21. DEVELOPMENT OF APPLICATIONS For development support please refer to [1] PAN172xETU Design-Guide. 22. RELIABILITY TESTS The measurement should be done after being exposed to room temperature and humidity for 1 hour. No. Item Limit Condition 1 Vibration test Electrical parameter should be in specification a) Freq.:10~50Hz,Amplitude:1.5mm a) 20min. / cycle,1hrs. each of XYZ axis b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis 2 Shock test the same as above Dropped onto hard wood from height of 50cm for 3 times 3 Heat cycle test the same as above -40C for 30min. and +85C for 30min.; each temperature 300 cycles 4 Moisture test the same as above +60C, 90% RH, 300h 5 Low temp. test the same as above -40C, 300h 6 High temp. test the same as above +85C, 300h 23. CAUTIONS Failure to follow the guidelines set forth in this document may result in degrading of the product's functions and damage to the product. 23.1. DESIGN NOTES (1) (2) (3) (4) (5) (6) (7) Follow the conditions written in this specification, especially the control signals of this module. The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47uF directly at the module). This product should not be mechanically stressed when installed. Keep this product away from heat. Heat is the major cause of decreasing the life of these products. Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance. The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. Keep this product away from other high frequency circuits. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 21 of 35 DATE 05.08.2013 23.2. INSTALLATION NOTES (1) Reflow soldering is possible twice based on the conditions in chapter 15. Set up the temperature at the soldering portion of this product according to this reflow profile. (2) Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat. (3) Carefully locate these products so that their temperatures will not increase due to the effects of heat generated by neighboring components. (4) If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur. (5) This product should not be mechanically stressed or vibrated when reflowed. (6) To repair the board by hand soldering, follow the conditions set forth in this chapter. (7) Do not wash this product. (8) Refer to the recommended pattern when designing a board. (9) Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the unit. (10) For more details on LGA (Land Grid Arrey) soldering processes refer to the application note. 23.3. USAGE CONDITIONS NOTES (1) (2) (3) (4) (5) (6) (7) Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products. Do not use dropped products. Do not touch, damage or soil the pins. Follow the recommended condition ratings about the power supply applied to this product. Electrode peeling strength: Do not add pressure of more than 4.9N when soldered on PCB. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information and communication equipment. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 22 of 35 DATE 05.08.2013 23.4. STORAGE NOTES (1) (2) (3) (4) (5) The module should not be stressed mechanically during storage. Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX Storage in direct sunlight Storage in an environment where the temperature may be outside the range of 5C to 35C range, or where the humidity may be outside the 45 to 85% range. Storage of the products for more than one year after the date of delivery Storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. Keep this product away from water, poisonous gas and corrosive gas. This product should not be stressed or shocked when transported. Follow the specification when stacking packed crates (max. 10). 23.5. SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may shortcircuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum. (1) Ensure the safety of the whole system by installing a protection circuit and a protection device. (2) Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 23.6. OTHER CAUTIONS (1) (2) (3) (4) (5) This specification sheet is copyrighted. Please do not disclose it to a third party. Please do not use the products for other purposes than those listed. Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product. This product has been manufactured without any ozone chemical controlled under the Montreal Protocol. These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner. In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash. In direct sunlight, outdoors, or in a dusty environment In an environment where condensation occurs. In an environment with a high concentration of harmful gas (e.g. salty air, HCl, PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT (6) (7) No. DS-17xx-2400-102 REV. 1.9 PAGE 23 of 35 DATE 05.08.2013 Cl2, SO2, H2S, NH3, and NOX) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. When you have any question or uncertainty, contact Panasonic. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 24 of 35 DATE 05.08.2013 24. PACKAGING If the product has mass production status, indicated in chapter 27, we will deliver the module in the package which are described below. 24.1. PAN172X TAPE DIMENSION PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 25 of 35 DATE 05.08.2013 24.2. PAN171X TAPE DIMENSION PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 26 of 35 DATE 05.08.2013 24.3. PACKING IN TAPE Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. 24.4. COMPONENT DIRECTION PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 27 of 35 DATE 05.08.2013 24.5. REEL DIMENSION PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 28 of 35 DATE 05.08.2013 24.6. LABEL FOR PACKAGE The picture shows an example from similar product. 105 mm PAN1315 Customer Code (1T) ENW89818C2JF (1P) Lot code [YYWWDLL] Example from above: YY year printed 08 WW normal calendar week printed 01 D day printed 5 (Friday) L line identifier, if more as one printed 1 L lot identifier per day printed 1 Customer Order Code, if any, otherwise company name will be printed (2P) Panasonic Order Code: ENW89820AxKF (9D) Date code as [YYWW] (Q) Quantity [XXXX], variable max. 1500 (HW/SW) Hardware /Software Release Hardware 01 Indicates the HW revision. Software 01 Indicates the SW revision. 24.7. TOTAL PACKAGE PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 29 of 35 DATE 05.08.2013 25. ORDERING INFORMATION Ordering part number ENW89820A1KF (2) ENW89820A3KF (2) ENW89835A1KF (2) ENW89835A3KF (2) ENW89835C1KF ENW89835C3KF Description MOQ PAN1720 CLASS 2 Bluetooth single mode Module according BT-4.0. Bluetooth(R) smart device PAN1720 Same as above including BlueRadios BR-SPP FW version. Bluetooth(R) smart device PAN1721 CLASS 2 Bluetooth single mode Module according BT-4.0. Bluetooth(R) smart device PAN1721 Same as above including BlueRadios BR-SPP FW version. Bluetooth(R) smart device PAN1711 CLASS 2 Bluetooth single mode Module according BT-4.0. Bluetooth(R) smart device without antenna PAN1711 Same as above without antenna including BlueRadios BR-SPP FW version. Bluetooth(R) smart device without antenna (1) 1500 1500 1500 1500 ES ES Notes: (1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production is 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels. (2) Samples are available on customer demand 25.1. INFORMATION REGARDING SOFTWARE VERSIONS ENW89820/35A1KF: The modules will be delivered with an empty flash. Customers need to program their own TI software in the production process. For details refer to the design guide. ENW89820/35A3KF: The modules are delivered with BlueRadios nBlue software. This software includes a bootloader and can be updated over the UART. For the latest revision refer to this link: http://blueradios.com/panasonic/index.php Note: New customers seeking firmware and firmware support are required to register by providing an invoice number. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 30 of 35 DATE 05.08.2013 26. ROHS AND REACH DECLARATION Hereby we declare to our best present knowledge based on declaration of our suppliers that this product follows th elatest official RoHS and REACH Directive. For the most updated one, please refer to [4]. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 31 of 35 DATE 05.08.2013 27. DATA SHEET STATUS This data sheet contains the final specification (RELEASE). Panasonic reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Please consult the most recently issued data sheet before initiating or completing a design. Use this URL to search for the most recent version of this data sheet: PAN172x Datasheet 28. HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks 0.01 November 2011 1 preliminary version. 0.02 November 2011 Deleted footnote in chapter 12. 1.00 April 2012 st Released Version. Add chapter 25.1 Information regarding Software Versions. Link to LGA app note. Removed watermark. UART pinning for BR-SW version. I2C pinning for PAN1721 version. FCC, IC, IDs. Added remark "top view" for footprint. Corrected FCC ID to T7VPAN17. Change to the correct company name in footer. Change IC text in chapter 32.1 Change to the correct company name in footer. New format for chapter Related Documents Added some remarks to PAN1721 version. Added non antenna version part number to Ordering information. 1.1 July 2012 1.2 July 2012 1.3 Agust 2012 1.4 November 2012 1.5 December 2012 Added PAN1711 ES information 1.6 January 2013 Added dimensions and pinout for the non-antenna versions PAN171x. 1.7 January 2013 Minor changes in chapter 6, 31.4. Chapter 3 was included and chapter 34 BT Certificiation was added. 1.8 May 2013 Changed Block Diagram 1.9 August 2013 Included Crossreference for GPIOs to BlueRadios Pinout 29. RELATED DOCUMENTS For an update, please search in the suitable homepage. [1] PAN172xETU Design-Guide http://www.pideu.panasonic.de/pdf/168ApplicationNote.pdf [2] Semiconductor Datasheet CC2540 from Texas Instruments CC2541 from Texas Instruments [3] Application Note Land Grid Array http://www.pideu.panasonic.de/pdf/184ext.pdf [4] REACH and RoHS Certificate http://www.pideu.panasonic.de/pdf/182ext2.jpg PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 32 of 35 DATE 05.08.2013 30. GENERAL INFORMATION (c) Panasonic Industrial Devices Europe GmbH 2012. All rights reserved. This product description does not lodge the claim to be complete and free of mistakes. Please contact the related product manager in every case. If we deliver ES samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and there may be differences to be published Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer: Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer, deviation or lapse in function of Engineering Sample, improper use of Engineering Samples. Panasonic disclaimes any liability for consequential and incidental damages. In case of any questions, please contact your local sales partner or the related product manager. 31. REGULATORY INFORMATION 31.1. FCC NOTICE The devices PAN17xx, for details refer to Chapter 25, including the antennas, which are listed in 31.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 31.2. CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 33 of 35 DATE 05.08.2013 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help 31.3. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7VPAN17. This FCC identifier is valid for all PAN17xx modules, for details, see the Chapter 25. Ordering Information. In any case the end product must be labelled exterior with "Contains FCC ID: T7VPAN17" 31.4. ANTENNA WARNING For the related part number of PAN17xx refer to Chapter 25. Ordering Information. This devices are tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. The FCC identifier for this device with the antenna listed in item 1 are the same (FCC ID: T7VPAN17). 31.5. APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. 31.6. Item Part Number Manufacturer 2 LDA212G3110K Murata Frequency Band Type Gain (dBi) 2.4GHz Chip-Antenna +0.9 RF EXPOSURE PAN17XX To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of PAN17xx with mounted ceramic antenna (FCC ID: T7VPAN17) is far below the FCC radio frequency exposure limits. Nevertheless, the PAN17xx shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 34 of 35 DATE 05.08.2013 32. INDUSTRY CANADA CERTIFICATION PAN17xx is licensed to meet the regulatory requirements of Industry Canada (IC), license: IC: 216Q-PAN17 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Due to the model size the IC identifier is displayed in the installation instruction only and can not be displayed on the modules label due to the limited size (8.7x15.6mm). 32.1. IC NOTICE The devices PAN17xx, for details refer to Chapter 25, including the antennas, which are listed in 31.5, complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-GEN. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 32.2. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is 216Q-PAN17. This IC identifier is valid for all PAN17xx modules, for details, see the Chapter 25. Ordering Information. In any case the end product must be labelled exterior with "Contains IC: 216Q-PAN17" 33. BLUETOOTH CERTIFICATION The Design is listed as Controller Subsystem with QDID: B016552 https://www.bluetooth.org/tpg/EPL_Detail.cfm?ProductID=22941 The module is listed as EPL based on Texas Instruments QDID B016552. To create an EPL, two Subsystems e.g. QDID: B016552 and QDID: B017183 (software stack) need to be combined. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de CLASSIFICATION PRODUCT SPECIFICATION CLASS 2 BLUETOOTH LOW ENERGY SINGLE MODE MODULE CUSTOMER'S CODE PANASONIC'S CODE ENW89820AxKF / ENW89835AxKF PAN172x / PAN171x SUBJECT No. DS-17xx-2400-102 REV. 1.9 PAGE 35 of 35 DATE 05.08.2013 34. EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module PAN17xx and their versions is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be labelled as follows: PAN17xx and their versions in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway. 35. LIFE SUPPORT POLICY This Panasonic product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic for any damages resulting. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de