13 12 1 10 9 8 7 6 ui a i i pS | [10.00] -& 5.14 - | 5.96 l- 1.00 MIN BOARD THICKNESS +] - __ | L- 12.7 |} 371 + 1.2 (TAIL LENGTH) 1.90) | P SIGNAL HOLES 3X 2.15 16.7 GROUND ee 2x KEEP-OUT ZONE NV , SEE NOTE 10 ROW J | SDD DIGI Bee 14.76 ste. \ H oO 3.90 oeo0e.oe ROW FE XSOUW 10.80 i 2 2 \ ROW E oeoe 6 @ CF ROW C -@ 60000 ROW B dq COOOL : | ny ty EEE CDH BBN \ / 135 70 T | D 0.10 ej a 14.39 ex | y SEE CHART | SEE NOTE 11 : | LpIN At OX sax ry yy ele or 216 ; (CUTAWAY) UNPLATED HOLES 0.05 Ks 23.70 FOR OUTRIGGERS 0.75 2x F Lee 4 1 25,75 (FULLY MATED) iif | IV nd P 20.20 + - ( (PIN LENGTH) 16.7 vA _ 1070 |) KM 3 | PIN A1 (270) E PIN A1 (90) t | _ 3.0 Loe RAF PCB RAF PCB 16.7 (POSITION 270) (POSITION 90) CONNECTOR D SIDE OF PCB | oT (11.55) L OD-RAM HOLE PATTERN (CONNECTOR SIDE) n Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | OESIGN UNITS | THIRD NGLE B i = S| |sympots| (UNLESS SPECIFIED) MM ONLY 3:1 METRIC Oc see TION 2 st = = mm INCH DRAWN BY DATE TITLE Bin Slg\WW-O [cPLacesie--- [#--- JMENDOZA 2012/08/20 IMPACT ORTHOGONAL DIRECT on E 3 PLACES [--- _|4--- __ |CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY 205 &I\/=0 [2 PLACES|+0.13_|+--- _|TELO 2012/08/20 UNGUIDED SALES DRAWING as o wi 1 PLACE 0.25 +--- APPROVED BY DATE eS= gl ANGULAR +1/2 _ |TELO 2013/12/26 foley MOLEX INCORPORATED A a Ss 24 ze |MATERIAL NO. DOCUMENT NO. SHEET NO. SOEEE DRAFT WHERE APPLICABLE] SEE CHART _|SD-171573-0001 10F 4 1 OL =o > WITHIN DIMENSIONS SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C wu INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION frame One 12 11 10 9 8 | 7 | 6 5 | 4 3 2 | 113 12 " 10 9 | 8 7 6 5 4 3 2 1 16.7 /+- 13.7 l- (3.0) KOU q UI 5 17157 3-16xx Z MODULE TYPE T] | L- pn LenaTH @) __| \ / 1 = UNGUIDED, TIN 4 = 490 (0.46 PTH) 5 = 5.50 (0.46 PTH) 7 = 4,90 (0.39 PTH) (53.3) tt OF COLUMNS 8 = 5.50 (0.39 PTH) 6 = 6 COLUMN MATE. POSITION 1 = 90 DEGREE 3 = 270 DEGREE 7 (3.0) a 12.15 MAX iz (POSITION 90 SHOWN) NOTES: 1, MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP) A GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY [UNGUIDED OD-RAM| 2. FINISH: 304 MIN GOLD IN CONTACT AREA. UNGUIDED_OD-RAM SELECTIVE TIN ON PCB TAILS. NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-76060-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002, 5. PACKAGE PER: PK-70873-8018. 6. SEE SHEETS 3 FOR ORTHOGONAL PIN MAPPING. 7. REFER TO MOLEX SALES DRAWING SD-76860-001 FOR THE MATING RECEPTACLES. S =) [ouacity| GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS }O caBERP ANGLE 8. REFER TO MOLEX ROUTING GUIDE AS-76850-990 FOR ADDITIONAL PCB LAYOUT S ) [syveo.s| (UNLESS SPECIIED) | an MM ONLY | _3_|_ METRIC PROJECTION 3S Ss mm AND ROUTING RECOMMENDATIONS. ~ B= Rlg\W-o [Cecacesie-- [e-- VMENDOZA 2012/08/20 IMPACT ORTHOGONAL DIRECT 9. CONNECTORS ARE SUPPLIED WITH TWO 2-32 THREAD FORMING SCREWS. 4 8 SPACES EERE BY Sate 3 PAIR RAM 90 & 270 ASSY ] 10. THESE DIMENSIONS REPRESENT THE AREA NEEDED TO ACCOMODATE CONNECTOR |W2e EINZ_-C Spaceslt = Wes |S|\/=O0 [2 PLACES|+073 [+ TELO 2012/08/20 UNGUIDED SALES DRAWING INSERTION AND REPAIR ON THE PC BOARD. THIS IS REFERRED TO AS THE tr Ya |g TPLACE [0.25 [=== APPROVED BY DATE | "CONNECTOR KEEP OUT ZONE" AND DOES NOT REPRESENT THE ACTUAL PERIMETER | S= S ANGULAR /2|1ELO 2013/12/26] Role MOLEX INCORPORATED OF THE CONNECTOR. i Ss 3 a 2 MATERIAL NO. DOCUMENT NO. SHEET NO. 11. MARKING: LOCATED APPROXIMATELY AS SHOWN, ON BOTTOM OR TOP HOUSING. Oe exe DRAFT WHERE APPLICABLE] SEE CHART SD-171573-0004 2 OF 4 PART NUMBER AND DATE CODE. Md =e] WITHIN DIMENSIONS SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C & C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f _C_P_AM_T Rev. & 2006/04/15 12 " 10 9 8 | 7 | 6 5 4 3 2 | 173 12 "1 10 9 8 7 6 5 4 3 2 1 OD-RAM PIN A1 MAPS OPTION 90 (NEARSIDE - FARSIDE) TO RAF PIN J6 A2-H6 A4-E6 A6-B6 B1-J5 B2-G6 B3-F5 B4-D6 B5-C5 B6-A6 C1+HS | 2-G5) | c3-5 | @4-D5) | c5-B5 | (6-A5 D2-H4 D4-E4 D6-B4 E1-J3 | E2-G4 | E3-F3 | E4-D4 | E5-C3 | E6-A4 F1-H3 F3-E3 F5-B3 G2-H2 G4-E2 G6-B2 H1-J1 H2-G2 | H3-F1 | H4-D2 | H5-C1 | H6-A2 J1-H1 J3-E1 J5-B1 NOTE: PINOUTS SHOWN IN BALLOONS ARE GROUNDS. GROUND PATHS ARE NOT DISCRETE CIRCUITS. MATERIAL NUMBER |# OF COLUMNS | # OF DIFF PAIR |MATE POSITION] DMP | PTH 171573-1614 6 18 90 490 | 0.46#0.05 171573-1615 6 18 90 550 | 0.46%0.05 171573-1617 6 18 90 4.90 | 0.3920.05 17573-1618 6 18 90 5.50 | 0,390.05 Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIRD ANGLE SS et UNLESS SPECIEED) MM ONLY 21 | METRIC |ClpRoveCTION +2 2 mm INCH | DRAWN BY DATE | TLE RS RlZIY-0 GPACESIE---_[e-- _|JMENDOZA 2012/08/20) IMPACT ORTHOGONAL DIRECT fn uh z 3 PLACES|+ == _|[4--- [CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY Wem &ING/=0 [2 PLACES|+0.13_[#--- _|TELO 2012/08/20 UNGUIDED SALES DRAWING wo2 o my 4 PLACE [0.25 t--- APPROVED BY DATE w= a ANGULAR +1/2 _|TELO 2013/12/26 rKoldx MOLEX INCORPORATED WW 5 3 a eZ MATERIAL NO. DOCUMENT NO. SHEET NO. Cesk DRAFT WHERE APPLICABLE] SEE CHART SD-171573-0001 3 OF 4 moo << WITCH DIMERS _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Ck ( INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 1b frome eons! 12 " 40 9 8 | 7 | 6 5 4 3 2 | 1 Rev. E 2006/04/15a 12 " 10 7 6 5 4 3 2 1 ORTHO POSITION 270 ORTHO PIN MAPPING OD-RAM PIN A1 MAPS TO RAF PIN A1 OPTION 270 (NEARSIDE - FARSIDE) ALLA) | A2-B1 | @3-DD | A4-E1 | @5-G) | A6-H1 BI-AZ2 | B2-C1 | B3-D2 | B4-F1 | BS-G2 | B-J1 c1+-B2 | 2-c2) | c3-E2 | G4-F2) | C5-H2 | C6-J2 D2-B3 | (03-03) | D4-E3 | (05-G3) | D6-H3 ELA4 | E2-C3 | 3-D4 | E4-F3 | E5-G4 | E6-J3 F1-B4 | 2-c4) | F3-E4 | 4-F4 | F5-H4 G2-B5 | G3-D5) | G4-E5 | G5-G5) | G6-H5 H1-A6 | H2-C5 | H3-D6 | H4-F5 | H5-G6 | H-J5 J1-B6 J3-E6 J5-H6 | G6-J6 NOTE: PINOUTS SHOWN IN BALLOONS ARE GROUNDS, GROUND PATHS ARE NOT DISCRETE CIRCUITS. MATERIAL NUMBER |# OF COLUMNS | # OF DIFF PAIR |MATE POSITION) DIM P PTH @ 171573-1634 6 18 270 4.90 | 0.4620.05 171573-1635 6 18 270 550 | 0.4620,05 171573-1637 6 18 270 4.90 | 0.3920.05 171573-1638 6 18 270 5.50 | 0.3920.05 Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS. | THIRD ANGLE SS tt UNLESS SPECIEED) MM ONLY 21 | METRIC |ClpRoveCTION +2 = mm INCH _ | DRAWN BY DATE TITLE mS RizlG7=-0 [ZPLACES|E--- ]#-- |JMENDOZA _ 2012/08/20) IMPACT ORTHOGONAL DIRECT uw Q A fr 3 PLACES|+--- _|+--- __ [CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY Bom le\W-O (2 eracesizors [4--- __TELO 2012/08/20 UNGUIDED SALES DRAWING woa WW 1PLACE [0.25 |+--- APPROVED BY DATE TSe 2 WO loptace = = TELO 2013/12/26 molex S3ge ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo2= OF SEE CHART SD-171573-0001 4 0F 4 Worre DRAFT WHERE APPLICABLE|_~= Mw SG <a _ SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX # C WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb-frame_C_F AM_T 12 " 10 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/1113 12 1 10 9 8 7 6 ui a i i pS | [10.00] -& 5.14 - | 5.96 l- 1.00 MIN BOARD THICKNESS +] - __ | L- 12.7 |} 371 + 1.2 (TAIL LENGTH) 1.90) | P SIGNAL HOLES 3X 2.15 16.7 GROUND ee 2x KEEP-OUT ZONE NV , SEE NOTE 10 ROW J | SDD DIGI Bee 14.76 ste. \ H oO 3.90 oeo0e.oe ROW FE XSOUW 10.80 i 2 2 \ ROW E oeoe 6 @ CF ROW C -@ 60000 ROW B dq COOOL : | ny ty EEE CDH BBN \ / 135 70 T | D 0.10 ej a 14.39 ex | y SEE CHART | SEE NOTE 11 : | LpIN At OX sax ry yy ele or 216 ; (CUTAWAY) UNPLATED HOLES 0.05 Ks 23.70 FOR OUTRIGGERS 0.75 2x F Lee 4 1 25,75 (FULLY MATED) iif | IV nd P 20.20 + - ( (PIN LENGTH) 16.7 vA _ 1070 |) KM 3 | PIN A1 (270) E PIN A1 (90) t | _ 3.0 Loe RAF PCB RAF PCB 16.7 (POSITION 270) (POSITION 90) CONNECTOR D SIDE OF PCB | oT (11.55) L OD-RAM HOLE PATTERN (CONNECTOR SIDE) n Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | OESIGN UNITS | THIRD NGLE B i = S| |sympots| (UNLESS SPECIFIED) MM ONLY 3:1 METRIC Oc see TION 2 st = = mm INCH DRAWN BY DATE TITLE Bin Slg\WW-O [cPLacesie--- [#--- JMENDOZA 2012/08/20 IMPACT ORTHOGONAL DIRECT on E 3 PLACES [--- _|4--- __ |CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY 205 &I\/=0 [2 PLACES|+0.13_|+--- _|TELO 2012/08/20 UNGUIDED SALES DRAWING as o wi 1 PLACE 0.25 +--- APPROVED BY DATE eS= gl ANGULAR +1/2 _ |TELO 2013/12/26 foley MOLEX INCORPORATED A a Ss 24 ze |MATERIAL NO. DOCUMENT NO. SHEET NO. SOEEE DRAFT WHERE APPLICABLE] SEE CHART _|SD-171573-0001 10F 4 1 OL =o > WITHIN DIMENSIONS SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C wu INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION frame One 12 11 10 9 8 | 7 | 6 5 | 4 3 2 | 113 12 " 10 9 | 8 7 6 5 4 3 2 1 16.7 /+- 13.7 l- (3.0) KOU q UI 5 17157 3-16xx Z MODULE TYPE T] | L- pn LenaTH @) __| \ / 1 = UNGUIDED, TIN 4 = 490 (0.46 PTH) 5 = 5.50 (0.46 PTH) 7 = 4,90 (0.39 PTH) (53.3) tt OF COLUMNS 8 = 5.50 (0.39 PTH) 6 = 6 COLUMN MATE. POSITION 1 = 90 DEGREE 3 = 270 DEGREE 7 (3.0) a 12.15 MAX iz (POSITION 90 SHOWN) NOTES: 1, MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP) A GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY [UNGUIDED OD-RAM| 2. FINISH: 304 MIN GOLD IN CONTACT AREA. UNGUIDED_OD-RAM SELECTIVE TIN ON PCB TAILS. NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-76060-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002, 5. PACKAGE PER: PK-70873-8018. 6. SEE SHEETS 3 FOR ORTHOGONAL PIN MAPPING. 7. REFER TO MOLEX SALES DRAWING SD-76860-001 FOR THE MATING RECEPTACLES. S =) [ouacity| GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS }O caBERP ANGLE 8. REFER TO MOLEX ROUTING GUIDE AS-76850-990 FOR ADDITIONAL PCB LAYOUT S ) [syveo.s| (UNLESS SPECIIED) | an MM ONLY | _3_|_ METRIC PROJECTION 3S Ss mm AND ROUTING RECOMMENDATIONS. ~ B= Rlg\W-o [Cecacesie-- [e-- VMENDOZA 2012/08/20 IMPACT ORTHOGONAL DIRECT 9. CONNECTORS ARE SUPPLIED WITH TWO 2-32 THREAD FORMING SCREWS. 4 8 SPACES EERE BY Sate 3 PAIR RAM 90 & 270 ASSY ] 10. THESE DIMENSIONS REPRESENT THE AREA NEEDED TO ACCOMODATE CONNECTOR |W2e EINZ_-C Spaceslt = Wes |S|\/=O0 [2 PLACES|+073 [+ TELO 2012/08/20 UNGUIDED SALES DRAWING INSERTION AND REPAIR ON THE PC BOARD. THIS IS REFERRED TO AS THE tr Ya |g TPLACE [0.25 [=== APPROVED BY DATE | "CONNECTOR KEEP OUT ZONE" AND DOES NOT REPRESENT THE ACTUAL PERIMETER | S= S ANGULAR /2|1ELO 2013/12/26] Role MOLEX INCORPORATED OF THE CONNECTOR. i Ss 3 a 2 MATERIAL NO. DOCUMENT NO. SHEET NO. 11. MARKING: LOCATED APPROXIMATELY AS SHOWN, ON BOTTOM OR TOP HOUSING. Oe exe DRAFT WHERE APPLICABLE] SEE CHART SD-171573-0004 2 OF 4 PART NUMBER AND DATE CODE. Md =e] WITHIN DIMENSIONS SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C & C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f _C_P_AM_T Rev. & 2006/04/15 12 " 10 9 8 | 7 | 6 5 4 3 2 | 173 12 "1 10 9 8 7 6 5 4 3 2 1 OD-RAM PIN A1 MAPS OPTION 90 (NEARSIDE - FARSIDE) TO RAF PIN J6 A2-H6 A4-E6 A6-B6 B1-J5 B2-G6 B3-F5 B4-D6 B5-C5 B6-A6 C1+HS | 2-G5) | c3-5 | @4-D5) | c5-B5 | (6-A5 D2-H4 D4-E4 D6-B4 E1-J3 | E2-G4 | E3-F3 | E4-D4 | E5-C3 | E6-A4 F1-H3 F3-E3 F5-B3 G2-H2 G4-E2 G6-B2 H1-J1 H2-G2 | H3-F1 | H4-D2 | H5-C1 | H6-A2 J1-H1 J3-E1 J5-B1 NOTE: PINOUTS SHOWN IN BALLOONS ARE GROUNDS. GROUND PATHS ARE NOT DISCRETE CIRCUITS. MATERIAL NUMBER |# OF COLUMNS | # OF DIFF PAIR |MATE POSITION] DMP | PTH 171573-1614 6 18 90 490 | 0.46#0.05 171573-1615 6 18 90 550 | 0.46%0.05 171573-1617 6 18 90 4.90 | 0.3920.05 17573-1618 6 18 90 5.50 | 0,390.05 Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIRD ANGLE SS et UNLESS SPECIEED) MM ONLY 21 | METRIC |ClpRoveCTION +2 2 mm INCH | DRAWN BY DATE | TLE RS RlZIY-0 GPACESIE---_[e-- _|JMENDOZA 2012/08/20) IMPACT ORTHOGONAL DIRECT fn uh z 3 PLACES|+ == _|[4--- [CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY Wem &ING/=0 [2 PLACES|+0.13_[#--- _|TELO 2012/08/20 UNGUIDED SALES DRAWING wo2 o my 4 PLACE [0.25 t--- APPROVED BY DATE w= a ANGULAR +1/2 _|TELO 2013/12/26 rKoldx MOLEX INCORPORATED WW 5 3 a eZ MATERIAL NO. DOCUMENT NO. SHEET NO. Cesk DRAFT WHERE APPLICABLE] SEE CHART SD-171573-0001 3 OF 4 moo << WITCH DIMERS _[S2=[ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Ck ( INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 1b frome eons! 12 " 40 9 8 | 7 | 6 5 4 3 2 | 1 Rev. E 2006/04/15a 12 " 10 7 6 5 4 3 2 1 ORTHO POSITION 270 ORTHO PIN MAPPING OD-RAM PIN A1 MAPS TO RAF PIN A1 OPTION 270 (NEARSIDE - FARSIDE) ALLA) | A2-B1 | @3-DD | A4-E1 | @5-G) | A6-H1 BI-AZ2 | B2-C1 | B3-D2 | B4-F1 | BS-G2 | B-J1 c1+-B2 | 2-c2) | c3-E2 | G4-F2) | C5-H2 | C6-J2 D2-B3 | (03-03) | D4-E3 | (05-G3) | D6-H3 ELA4 | E2-C3 | 3-D4 | E4-F3 | E5-G4 | E6-J3 F1-B4 | 2-c4) | F3-E4 | 4-F4 | F5-H4 G2-B5 | G3-D5) | G4-E5 | G5-G5) | G6-H5 H1-A6 | H2-C5 | H3-D6 | H4-F5 | H5-G6 | H-J5 J1-B6 J3-E6 J5-H6 | G6-J6 NOTE: PINOUTS SHOWN IN BALLOONS ARE GROUNDS, GROUND PATHS ARE NOT DISCRETE CIRCUITS. MATERIAL NUMBER |# OF COLUMNS | # OF DIFF PAIR |MATE POSITION) DIM P PTH @ 171573-1634 6 18 270 4.90 | 0.4620.05 171573-1635 6 18 270 550 | 0.4620,05 171573-1637 6 18 270 4.90 | 0.3920.05 171573-1638 6 18 270 5.50 | 0.3920.05 Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS. | THIRD ANGLE SS tt UNLESS SPECIEED) MM ONLY 21 | METRIC |ClpRoveCTION +2 = mm INCH _ | DRAWN BY DATE TITLE mS RizlG7=-0 [ZPLACES|E--- ]#-- |JMENDOZA _ 2012/08/20) IMPACT ORTHOGONAL DIRECT uw Q A fr 3 PLACES|+--- _|+--- __ [CHECKED BY DATE 3 PAIR RAM 90 & 270 ASSY Bom le\W-O (2 eracesizors [4--- __TELO 2012/08/20 UNGUIDED SALES DRAWING woa WW 1PLACE [0.25 |+--- APPROVED BY DATE TSe 2 WO loptace = = TELO 2013/12/26 molex S3ge ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo2= OF SEE CHART SD-171573-0001 4 0F 4 Worre DRAFT WHERE APPLICABLE|_~= Mw SG <a _ SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX # C WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb-frame_C_F AM_T 12 " 10 7 6 5 4 3 | 2 | 1 Rev. G 2012/01/11